ip access IPA435R Access point User Manual S60 Datasheet Apr 2017 v1 0

ip.access ltd Access point S60 Datasheet Apr 2017 v1 0

S60 Datasheet Apr 2017 v1.0

The S60 Access Point
The S60 AP is a cost optimised indoor LTE small cell, targeted
at enterprise environments such as small oces, home oces,
retailers, and public spaces.
The S60 delivers 4G coverage and capacity into mass-market
environments, and can be installed directly by end users in an
unmanaged deployment.
With up to 150/50 Mbps LTE FDD performance, the S60 supports
up to 32 active 4G users, depending on the product variant.
Fully self-configuring, the S60 can be mailed out to end users,
and simply requires power and ethernet to be connected for
a plug-and-play installation experience. ip.access’ proven Self
Organising Network (SON) and Network Listen features have
already been used for deployments approaching 1.5 million small
cells worldwide.
The S60 AP has single band FDD LTE support, covering all major
global markets. The S60 also incorporates ip.access’ innovative
SUMO™ technology, allowing a single S60 to provide coverage for
multiple operators.
Full mobility is provided between the S60 AP and neighbouring
4G, 3G and 2G cells, allowing seamless handover of calls to or
from the macro network. Voice calls are supported with VoLTE, or
using CSFB to ooad voice service to 3G or 2G macro network.
The S60 is housed in a compact all-plastic enclosure with internal
antennas, which can be desk, wall or ceiling mounted.
Viper™ virtualised enterprise RAN platform
The S60 is part of ip.access’ Viper end-to-end small cell platform
for enterprise RAN, which integrates the following components:
A range of plug-and-play 2G, 3G and 4G small cell Access
Points for small, medium and large enterprise deployments
Virtualised Gateways which securely handle and route all trac
between the APs and the operator’s core network
SUMO™ Multi-Operator technology, allowing a single access
point to provide coverage for all networks
As A Service deployment models, including core network
integration, AP deployment, and network operation.
S60 nanoLTE AP
S60 nanoLTE®
4G SoHo Access Point
for small enterprises
The S60 4G small cell is a
cost-eective solution for
LTE coverage and capacity
in enterprise environments,
using IP backhaul for rapid
deployment by the end-user
4G
SOLUTION
Viper™ end-to-end small cell platform
Spectrum Access mechanisms
Licensed - Single Operator
Licensed - SUMO Multi-Operator
Network Listen
LTE Network listen to support radio synchronisation and RF
planning
Synchronisation
NTP support
IEEE1588v2 support
Network Listen
1 PPS port option (by request)
Security
3GPP air interface security
IPsec IKEv2 on AP-SeGW links
X509 certificate authentication with CRL
Secure boot and code signing
Environmental & physical
Dimensions 188 x 137 x 46mm (on stand)
176 x 130 x 34mm (without stand)
Power input DC adaptor as standard, PoE with
optional accessory
Temp. range 0° to 45°C
Operating 10 to 70% non-condensing
Ingress protection IP30
Mounting Wall mounted, free standing or ceiling
mounted
S60 nanoLTE Access Point
LTE radio
2 x 2 MIMO, 50mW per port
3 / 5 / 10 / 15 / 20 MHz channel bandwidths
Internal antennas
LTE services
Up to 16/32 active LTE users depending on licensing
Up to 150/50 Mbps depending on the bandwidth configured
VoLTE or CSFB to GERAN/UTRAN for voice
MOCN with active policy enforcement (SUMO)
Warning system broadcast - CMAS and ETWS supported
Full GBR and non-GBR support with QoS aware scheduler
LTE mobility
Reselection to/from macro layer & APs
Intra-frequency, inter-frequency, Inter-RAT
Handover to/from macro layer & between APs
Intra-frequency, inter-frequency, Inter-RAT
S1 & X2-based
Interfaces
S1 (S1-Flex via gateway), X2
Uu LTE air interfaces to standard LTE UEs
Band Options
FDD-LTE: USA Bands 2, 4, 5, 12, 13, 14, 17
FDD-LTE: ROW Bands 1, 3, 7, 8, 20, 28
nanoVirt System
NOS/OMC-R
Clients
Management
Network
CBC
SGSN
Data
MSC/MGW
Voice
Iuh
Mobile Core
EPC
Data
S1
Iu-BC
TR-069 CORBA
S1
BSMIS
IPsec
Tunnels
IPsec
Tunnels
Secure
A-bis
Secure
A-bis
S1
Iu
Mgmt Mgmt
nano3G AC
Security
Gateway
Public
Services
NTP
DNS
CRL
Redirector
IP Network
(Backhaul)
NOS
3G & LTE Mgmt
OMC-R
2G Mgmt
IPsec Tunnels &
Secure A-bis
A & Gb
softBSC
Iu-PS
& Gb
Iu-CS
& A
nanoLTE GW
Switch/Router
vSwitch
Firewall
Small Cells
nanoLTE
E-Class APs
nanoLTE
S-Class APs
Enterprise
nanoBTSs
nano3G
E-Class APs
nano3G
S-Class APs
DualMode
APs
© 2017 ip.access Ltd. ip.access, viper™, nanoLTE™, Oyster3G®, nano3G® and nanoGSM® are trademarks of ip.access Ltd. All other trademarks are acknowledged. Information in this document is subject to change without notice and may contain errors. No responsibility is assumed by ip.access for the
use of this information, nor for infringements of patents or other rights of third parties. The documentation and/or software may provide links to Web sites and access to content, products, and services from third parties. ip.access is not responsible for the availability of, or any content provided on, third-
party Web sites. You bear all risks associated with the use of such content. This document is the property of ip.access and implies no license under patents, copyrights, trade secrets or other intellectual property rights. No part of this publication may be copied, reproduced, stored in a retrieval system, or
transmitted, in any form of any means, electronic, photographic, or otherwise, or used as the basis for manufacture or sale of any items without the prior written consent of ip.access. S60 Datasheet Apr 2017 v1.0
S-class SoHo access points can be deployed by
end-users as easily as a Wi-Fi router, cutting costs
and simplifying the small cell rollout process.

Navigation menu