ipio INTR-100295 NoviConnected 4 Wheel Hubless User Manual PowerPoint Presentation

Incipio, LLC NoviConnected 4 Wheel Hubless PowerPoint Presentation

Users Manual

Getting Started•Charge NoviConnected Luggage by plugging either endof the included USB-C cable into the luggage’s USB-Cport and the other end into any USB-C wall charger.•Download and install Incase Smart App from the AppStore.•Open Incase Smart App and follow on screen promptsto search and add NoviConnected Luggage.•For troubleshooting, visit https://www.incase.comBattery Door/Dust CoverUSB-C Input/Output30W max5V3A, 9V3A, 15V2AUSB-A 5V2.4ALED Fuel GaugeButtonINTR-100295
Technical Specification•Power Input: USB-C 30W (5V3A, 9V3A, 15V2A)•USB-C Power Output: 30W max (5V3A, 9V3A, 15V2A•USB-A Power Output: 12W max (5V2.4A)•RF Frequency and Power•Operating Temperature: 0’C to 60’C•Storage Temperature: -20’C to 80’CIncluded Accessory:•1.5m USB-C to USB-C charging cableRadio Waves Specs Radio Frequency Max.Output Power Bluetooth 2402 - 2480MHz 11+/-2.5dBm CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY ANINCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TOTHE INSTRUCTIONSHereby, Incase Design Corporation declares that the radio equipment type, Bluetooth smart battery bank, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.incase.com.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Le présent appareil est conforme aux CNR d'Industrie Canadaapplicables aux appareils radio exempts de licence. L'exploitationest autorisée aux deux conditions suivantes : (1) l'appareil ne doitpas produire de brouillage, et (2) l'utilisateur de l'appareil doitaccepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d'en compromettre le fonctionnement.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from thatThis device complies with Industry Canada licence-exempt RSS-247 standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu