ipio INTR-100295 NoviConnected 4 Wheel Hubless User Manual PowerPoint Presentation
Incipio, LLC NoviConnected 4 Wheel Hubless PowerPoint Presentation
ipio >
Users Manual
Getting Started
•Charge NoviConnected Luggage by plugging either end
of the included USB-C cable into the luggage’s USB-C
port and the other end into any USB-C wall charger.
•Download and install Incase Smart App from the App
Store.
•Open Incase Smart App and follow on screen prompts
to search and add NoviConnected Luggage.
•For troubleshooting, visit https://www.incase.com
Battery Door/Dust Cover
USB-C Input/Output
30W max
5V3A, 9V3A, 15V2A
USB-A
5V2.4A
LED Fuel Gauge
Button
INTR-100295
Technical Specification
•Power Input: USB-C 30W (5V3A, 9V3A, 15V2A)
•USB-C Power Output: 30W max (5V3A, 9V3A, 15V2A
•USB-A Power Output: 12W max (5V2.4A)
•RF Frequency and Power
•Operating Temperature: 0’C to 60’C
•Storage Temperature: -20’C to 80’C
Included Accessory:
•1.5m USB-C to USB-C charging cable
Radio Waves Specs
Radio Frequency Max.Output Power
Bluetooth 2402 - 2480MHz
11+/-2.5dBm
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
Hereby, Incase Design Corporation declares that the radio
equipment type, Bluetooth smart battery bank, is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.incase.com.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that
This device complies with Industry Canada licence-exempt
RSS-247 standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.