ipio IPD265 Bluetooth Keyboard User Manual

Incipio Technologies, Inc. Bluetooth Keyboard Users Manual

Users Manual

ClamCase ProQuick Start Guide
WelcomeGet ready to experience your device like never beforeLet s get started!’
Setup ・ Place your device inside the bottom edge of the ClamCase. ・ Press your device into the top edge of the ClamCase and it will snap in securely. ・ To remove, snap back the top clip of the CalmCase and release your device.
Charge ・ Charge your ClamCase with the supplied USB cable until the charging indicator LED turns green. ・ A full charge can take up to 120 minutes. .
Power up ・ Turn on the ClamCase keyboard before use. to avoid unintentional key strokes.
Manual Pairing: On your ClamCase keyboard press and hold the fn + Bluetooth keys for 5 seconds. The pairing LED will begin flashing.Pairing ・ Your ClamCase Pro automatically enters pairing mode when first powered on.
Open the Settings app on your device. Turn Bluetooth on.Tap to connect:
Function KeysMedia Volume iOSHome Caps LockBattery Back MuteBluetooth Play/Pause DownForward UpLock SearchSiri On-Screen Keyboard InternationalKeyboards
To access the functions keys (shown here in gray) press and hold the ‘fn’ button, then press the key with the desired function.Home Battery Bluetooth International KeyboardsiOS Media Volume To easily toggle through your preset keyboard languages, press ‘Control’ and the Spacebar
Battery Life ・ Press fn + battery keys simultaneously. ・ The LED will flash to indicate battery life. Flashes Percentage 100-75% 75-50% 50-25% 25-0%
Troubleshooting ・ Press any key to wake your ClamCase from sleep mode. ・ Turn your ClamCase and then back on. ・ Recharge the ClamCase battery. ・ Re-establish a Bluetooth connection between your ClamCase and device. ・ Verify your device’s Bluetooth feature is turned on.
FCC COMPLIANCE STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cau se harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC NOTICE TO CANADIAN USERSThis device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to thefollowingtwo conditions: (1) This device may not cause interference, and (2) This device must accept anyinterference,including interference that may cause undesired operation of the device. This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmfulinterference. This Class B digital apparatus complies with Canadian ICES‐003 (Cetappareilnumérique de laClasse B conforme à la norme NMB‐003 du Canada).Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence.L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage,et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi lebrouillageest susceptible d'encompromettre le fonctionnement.
Contact support@incipio.com 1.800.733.0088 incipio.com/support
DC397R44415

Navigation menu