ipio IPD265 Bluetooth Keyboard User Manual
Incipio Technologies, Inc. Bluetooth Keyboard Users Manual
ipio >
Users Manual
ClamCase Pro
Quick Start Guide
Welcome
Get ready to experience your device like never before
Let s get started!
’
Setup
・ Place your device inside the bottom edge of the ClamCase.
・ Press your device into the top edge of the ClamCase and it
will snap in securely.
・ To remove, snap back the top clip of the CalmCase and
release your device.
Charge
・ Charge your ClamCase with the supplied USB
cable until the charging indicator LED turns green.
・ A full charge can take up to 120 minutes.
.
Power up
・ Turn on the ClamCase keyboard before use.
to avoid unintentional key strokes.
Manual Pairing: On your ClamCase keyboard
press and hold the fn + Bluetooth keys for 5
seconds. The pairing LED will begin flashing.
Pairing
・ Your ClamCase Pro automatically enters pairing
mode when first powered on.
Open the Settings app on your device.
Turn Bluetooth on.
Tap to connect:
Function Keys
Media Volume
iOS
Home Caps Lock
Battery Back MuteBluetooth Play/Pause DownForward Up
Lock SearchSiri On-Screen
Keyboard
International
Keyboards
To access the functions keys (shown here
in gray) press and hold the ‘fn’ button, then
press the key with the desired function.
Home Battery Bluetooth International Keyboards
iOS Media Volume
To easily toggle through your preset keyboard
languages, press ‘Control’ and the Spacebar
Battery Life
・ Press fn + battery keys simultaneously.
・ The LED will flash to indicate battery life.
Flashes
Percentage 100-75% 75-50% 50-25% 25-0%
Troubleshooting
・ Press any key to wake your ClamCase from sleep mode.
・ Turn your ClamCase and then back on.
・ Recharge the ClamCase battery.
・ Re-establish a Bluetooth connection between your ClamCase and device.
・ Verify your device’s Bluetooth feature is turned on.
FCC COMPLIANCE STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cau se harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
IC NOTICE TO CANADIAN USERS
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to
thefollowingtwo conditions: (1) This device may not cause interference, and (2) This device must
accept anyinterference,including interference that may cause undesired operation of the device.
This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this
device does not cause harmfulinterference. This Class B digital apparatus complies with Canadian
ICES‐003 (Cetappareilnumérique de laClasse B conforme à la norme NMB‐003 du Canada).
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
delicence.
L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage,
et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi lebrouillageest
susceptible d'encompromettre le fonctionnement.
Contact
support@incipio.com 1.800.733.0088 incipio.com/support
DC397R44415