Rockwell Automation Publication 100-TD013J-EN-P - April 2021. Summary of ... Switching of Hermetically Sealed Cooling Compressor Motors - manual reset.
– Permanently fixed – Protective cover to prevent manual operation – Red contact ... 10 Rockwell Automation Publication 100-TD013J-EN-P - April 2021. Specifications.
Technical Data Original Instructions IEC Contactor Specifications Bulletin Numbers 100/104-K, 100/104-C, 100/104S-C, 100/104-E, 100S-E, 100Q-C Topic Page Summary of Changes 2 Product Line Overview 3 IEC Contactors 3 Safety Contactors 4 100-K/104-K Miniature Contactors 5 Product Selection 5 Accessories 8 Specifications 11 Life-Load Curves 15 Approximate Dimensions 16 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors 17 Product Selection--100-C/104-C Contactors 17 Product Selection--100S-C/104S-C Safety Contactors 22 Product Selection--100Q-C Capacitor-switching Contactors 30 Accessories 31 Renewal Parts 36 Specifications 38 Life-Load Curves 49 Approximate Dimensions 56 100-E/104-E, 100S-E/104S-E Contactors 59 Product Selection--100-E/104-E Contactors 59 Product Selection--100S-E Safety Contactors 62 Accessories 66 Renewal Parts 73 Specifications 75 Life-Load Curves 96 Approximate Dimensions 101 Additional Resources 113 Summary of Changes This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes. Topic Page Corrected pkg. qty. for mechanical interlocks 68 Corrected Cat. Nos. for mechanical latches 69 2 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 IEC Contactors Product Line Overview Bulletin No. Screw Terminals 100-K/104-K 100-C/104-C 100-E/104-E (9...96 A), Thru-hole (116...2650 A) Spring Terminals (5...9 A) (9...16 A) -- Max.Current Ie 12 A 97 A 2650 A Current Rating 5...12 A 9...97 A 9...2650 A Features · Panel mounting or mounting on 35 mm DIN · Mini-contactors · Panel mounting or mounting on 35 mm DIN Rail Rail · Uniform panel mounting dimensions · AC or DC coil control · Panel mounting or mounting on 35 mm DIN Rail · Reversible coil terminals (line or load side) · AC or DC coil control · Common accessories · E09...E370 AC/DC electronic coil; with optional PLC interface on E116...E370 E400...E2650 · Made of environmentally friendly materials · Made of environmentally friendly materials AC/DC with PLC interface · Made of environmentally friendly materials Contacts · 3 power poles with internal N.O. or N.C. auxiliary contact, or 4 power poles. · Optional front-mounted 2- or 4-pole external auxiliary contact block. · 3 power poles with internal N.O. or N.C. · 3 main poles with 2 auxiliary contacts auxiliary contact or 4 power poles (9...23 A). (1 N.O. and 1 N.C.) on E116...E2650 · Optional front- or side-mounted 1-, 2- or 4-pole · Optional side- or front-mounted external external auxiliary contact block. auxiliary contact block. Coil Voltages AC = 24...600V, 50/60Hz DC = 12...250V AC = 12...600V, 50/60Hz DC = 9...250V 20...500V 50/60 Hz/DC Optional Overload Relays Electronic or bimetallic Electronic or bimetallic Electronic · Front-mount auxiliary contacts Optional Accessories · Surge suppressors · Electronic timers · Mechanical interlocks · Front or side-mount auxiliary contacts · Surge suppressors · Electronic or pneumatic timers · Mechanical interlocks · Mechanical latches · Side- or front-mount auxiliary contacts · Mechanical interlocks · Terminal lugs · Terminal shields · Connecting bars Standards/ Certifications · UL · CSA · IEC · CE Marked · CCC · UL · CSA · IEC · CE Marked · CCC · EN/IEC · CE Marked · cULus · CCC · EAC · C-tick · KC Rockwell Automation Publication 100-TD013J-EN-P - April 2021 3 Product Line Overview Safety Contactors Safety Contactors Bulletin No. Screw Terminals Max.Current Ie Current Rating Features Contacts Coil Voltages 100S-C/104S-C 3 97 A 9...97 A · Positively guided/mechanically linked auxiliary contacts · Front-mounted auxiliary contacts: Permanently fixed Protective cover to prevent manual operation Red contact housing for easy identification Incorporates IEC 947-5-1 "Mechanically Linked" symbol Optional gold-plated bifurcated versions · AC and DC operating coils · SUVA third-party certification 3 main poles with N.C. mechanically linked or mirror feedback contacts AC = 12...600V, 50/60Hz DC = 12...250V Optional Accessories · Side-mount auxiliary contacts · Surge suppressors · Electronic timers · Mechanical interlocks · EN/IEC 60947-4 · IEC 60947-5-1 Annex L -- Mechanically Linked Contacts Standards Compliance · · IEC 60947-4-1 Annex H -- Mirror Contacts UL 508 · CSA C22.2 No. 14 · EN50205 Certifications · cULus Listed (File No. E3125; Guide NLDX, NLDX7) · SUVA Third-Party Certified · CE Marked 100S-E Thru-hole 750 A 9...750 A · Mirror contact performance on auxiliary contacts · Red N.C. low-power auxiliary contacts used for feedback circuit · SUVA third-party certification · AC/ DC operating coils · "Mirror Contact" symbol on front 3 main poles with N.C. mirror feedback contacts 20...500V 50/60 Hz/DC · Side-mount auxiliary contacts · Terminal shields · Terminal lugs · Terminal enlargements · Terminal extensions · Connection bars for 140G molded case circuit breakers, 140MG motor protection circuit breakers, and 140MG motor circuit protectors · EN/IEC 60947-4-1 · IEC 60947-4-1, Annex F -- Mirror Contacts · UL 60947-4-1 · CSA C22.2, No. 60947-4-1 · cULus Listed (File No. E41850; Guide No. NLDX, NLDX7) · CE Marked · CCC · UL · CSA · EAC · RCM (C-tick) · SUVA Third-Party Certified · KC 4 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-K/104-K Miniature Contactors Product Selection · 3-Pole AC- and DC-operated contactors · Compact size · Same dimensions for AC and DC · Full-voltage non-reversing and reversing contactors · 5, 9, and 12 A contactors rated at 690V 100-K Miniature Contactor · IP2X finger protection · Optional integrated surge suppressor · Compatible with Bulletin 193-K bimetallic overload relay · Mirror contacts per IEC 60947-4-1 and mechanically linked contacts per IEC 60947-5-1 on main unit 104-K Reversing Miniature Contactor Bulletin 100-K miniature contactors are designed for commercial and light industrial applications where panel space is at a premium. These miniature devices, while 45 mm wide, are shallower and have less panel depth requirements than standard IEC contactors. The miniature contactors have been designed with flexibility in mind. They are available with AC or DC operating coils, several contact ratings, and optional 2- or 4-pole adder decks in a variety of auxiliary contact configurations. 3-Pole AC- and DC-operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) Hp (60 Hz) 40 °C (104 °F) AC-3 AC-1 1-Phase 3-Phase 230V 400/415V 500V 690V 115V 230V 200V 230V 460V 575V Screw Terminals 5 20 1.5 2.2 2.2 2.2 1/2 1 1-1/2 1-1/2 3 3 9 20 3 4 4 4 1/2 1-1/2 2 2 5 5 12 20 3 5.5 5.5 5.5 3/4 2 3 3 7-1/2 7-1/2 Spring Clamp Terminals 5 10 1.5 2.2 2.2 2.2 1/3 3/4 1-1/2 1-1/2 3 3 9 10 2.2 4 4 4 1/3 1 2 2 5 5 (1) May be ordered in package quantities of 20. Add letter M to the end of the cat. no. Example: 100-K09ZJ10M. Coil voltage code -- see page 6. Auxiliary Contacts N.O. N.C. 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 Pkg. Qty.(1) Cat. No. 1 100-K0510 1 100-K0501 1 100-K0910 1 100-K0901 1 100-K1210 1 100-K1201 1 100-KR0510 1 100-KR0501 1 100-KR0910 1 100-KR0901 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 5 100-K/104-K Miniature Contactors Product Selection 4-Pole AC- and DC-operated Contactors Rated Operational Current Ie [A] 40 °C (104 °F) AC-3 AC-1 Ratings for switching AC motors - AC-2, AC-3 3-phase kW (50 Hz) 230V 400/ 415V 500V 690V 1-Phase 115V 230V Hp (60 Hz) 3-Phase 200V 230V 460V 5 20 1.5 2.2 2.2 2.2 1/2 1 1-1/2 1-1/2 3 9 20 3 4 4 4 1/2 1-1/2 2 2 5 12 20 3 5.5 5.5 5.5 3/4 2 3 3 7-1/2 (1) May be ordered in package quantities of 20. Add letter M to the end of the cat. no. Example: 100-K09ZJ400M. Contact Configuration, Main Poles Pkg. Qty.(1) Cat. No. 575V N.O. N.C. 4 0 3 3 1 2 2 4 0 5 3 1 2 2 4 0 7-1/2 3 1 2 2 1 100-K05400 1 100-K05300 1 100-K05200 1 100-K09400 1 100-K09300 1 100-K09200 1 100-K12400 1 100-K12300 1 100-K12200 Reversing AC- and DC-operated Contactors Rated Operational Current Ie [A] 40 °C (104 °F) AC-3 AC-1 5 20 9 20 12 20 Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) 230V 400/415V 500V 690V 1.5 2.2 2.2 2.2 3 4 4 4 3 5.5 5.5 5.5 1-Phase 115V 230V ---- ---- ---- Hp (60 Hz) 3-Phase 200V 230V 460V 1-1/2 1-1/2 3 2 2 5 3 3 7-1/2 Auxiliary Contacts per Contactor(1) 575V N.O. N.C. 3 0 1 5 0 1 7-1/2 0 1 Cat. No.(2) 104-K0502 104-K0902 104-K1202 (1) Used for electrical interlocking (2) Bulletin 104-K reversing contactors are factory assembled and include contactors, mechanical interlock (Cat. No. 100-KMCH) and wiring kit (Cat. No. 100-KPR) for power and control circuit (electrical interlock). Coil Voltage Codes The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60 Hz: Cat. No. 100-K0910 becomes Cat. No.100-K09D10. Screw type terminal versions AC Voltages [V] 24 110 120 230 240 400 480 600 DC Voltages [V] 12 24 110 125 220 250 50 Hz -- D -- -- -- -- -- -- Standard ZQ ZJ ZD ZS ZA ZT 60 Hz -- -- D -- -- -- B VC with Integrated Diode -- DJ -- -- -- -- 50/60 Hz KJ -- -- KF KA KN -- -- Spring clamp type terminal versions AC Voltages [V] 24 110 120 230 50 Hz -- D -- -- 60 Hz -- -- D -- 50/60 Hz KJ -- -- KF DC Voltages [V] Standard with Integrated Diode 24 110 ZJ ZD DJ -- 6 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-K/104-K Miniature Contactors Product Selection Assignment of Contacts Table valid for: AC / DC = 0.85...1.1 x Us, Tamb. = -25 °C...+60 °C (-13...140 °F), normal position (horizontal rail mounting) Device Combinations in Accordance with IEC 60947-1 / -4-1 Auxiliary Contact Blocks(1) Circuit Diagram Control 100-K Miniature Contactors (AC and DC Control) 100-K0510 100-K0910 100-K1210 100-K0501 100-K0901 100-K1201 100-K05400 100-K09400 100-K12400 100-K05300 100-K09300 100-K12300 100-K05200 100-K09200 100-K12200 A1 1 3 5 13 A1 1 3 5 21 A1 1 3 5 7 A1 1 3 5 R7 A1 1 3 R5 R7 K1 K1 K1 K1 K1 A2 2 4 6 14 A2 2 4 6 22 A2 2 4 6 8 A2 2 4 6 R8 A2 2 4 R6 R8 100-KFA02E 100-KFC02 100-KFA11E 100-KFB11 100-KFC11 51 61 52 62 21 31 22 32 53 61 54 62 21 33 22 34 23 31 24 32 AC/DC AC/DC AC/DC AC/DC AC/DC (2) 01 + 02 = 03 (3) (2) (2)(3) -- 10 + 02 = 12 -- 00 + 02 = 02 00 + 02 = 02 (3) -- (2) 01 + 11 = 12 (2) (2) (2) 10 + 11 = 21 -- 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 10 + 11 = 21 (2) 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 100-KFA20E 100-KFC20 53 63 54 64 23 33 24 34 AC/DC AC/DC (2) 10 + 20 = 30 01 + 20 = 21 (2) (2) (2) 00 + 20 = 20 00 + 20 = 20 (2) 00 + 20 = 20 51 61 71 81 100-KFA04E AC/DC (2)(3) -- (2)(3) -- -- 52 62 72 82 21 31 41 51 100-KFC04 AC/DC 10 + 04 = 14 (3) -- 00 + 04 = 04 (3) -- -- 22 32 42 52 53 61 71 81 100-KFA13E AC/DC (2) 01 + 13 = 14 (3) (2) (2)(3) -- 54 62 72 82 23 31 41 51 100-KFC13 AC/DC 10 + 13 = 23 (2)(3) 00 + 13 = 13 00 + 13 = 13 (3) -- 24 32 42 52 53 83 61 71 100-KFA22Z AC/DC (2) 01 + 22 = 23 (3) (2) (2)(3) -- 54 84 62 72 100-KFB22 43 53 21 31 44 54 22 32 AC/DC 10 + 22 = 32 -- 00 + 22 = 22 00 + 22 = 22 (3) -- 100-KFC22 23 53 31 41 AC/DC 10 + 22 = 32 (2)(3) 00 + 22 = 22 00 + 22 = 22 (3) -- 24 54 32 42 100-KFA31Z 53 73 83 61 AC/DC (2) -- (2)(4) -- -- 54 74 84 62 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 7 100-K/104-K Miniature Contactors Accessories Device Combinations in Accordance with IEC 60947-1 / -4-1 (Continued) Auxiliary Contact Blocks(1) Circuit Diagram Control 100-K Miniature Contactors (AC and DC Control) 100-K0510 100-K0910 100-K1210 100-K0501 100-K0901 100-K1201 100-K05400 100-K09400 100-K12400 100-K05300 100-K09300 100-K12300 100-K05200 100-K09200 100-K12200 A1 1 3 5 13 A1 1 3 5 21 A1 1 3 5 7 A1 1 3 5 R7 A1 1 3 R5 R7 K1 K1 K1 K1 K1 A2 2 4 6 14 A2 2 4 6 22 A2 2 4 6 8 A2 2 4 6 R8 A2 2 4 R6 R8 100-KFC31 23 43 53 31 AC/DC 10 + 31 = 41 (4) -- 24 44 54 32 100-KFA40E 53 63 73 83 AC/DC (2) 54 64 74 84 100-KFC40 23 33 43 53 AC/DC 10 + 40 = 50 (2) 24 34 44 54 (1) For other operating limits, please contact your local Rockwell Automation sales office or Allen-Bradley distributor (2) Combination possible but not recommended, due to repeating or not consecutive sequence numbering (3) Tamb max. +40 °C (104 °F) (4) Tamb max. +40 °C (104 °F) and only allowed for coil voltage 24V DC or 230V AC 00 + 31 = 31 (4) (2) 00 + 40 = 40 -- (2) 00 + 40 = 40 -- (2) 00 + 40 = 40 Accessories Auxiliary Contact Blocks Description Front-mounted Auxiliary Contacts · Auxiliary contact blocks 2- and 4-pole versions · Choice of contact configurations · Snap on, no tools required · Electronic-compatible bifurcated contacts for signals down to 15V/2 mA · Mirror Contact performance per IEC 60947-4-1 Connection Diagrams 21 31 22 32 23 31 24 32 23 33 24 34 21 31 41 51 22 32 42 52 23 31 41 51 24 32 42 52 23 43 53 31 24 44 54 32 23 53 31 41 24 54 32 42 23 33 43 53 24 34 44 54 Cat. No. For Use With Pkg. Qty. N.O. N.C. Screw Type Spring Clamp Terminals Terminals 0 2 100-K05...K12 1 100-KFC02 100-KRFC02 1 1 100-K05...K12 1 100-KFC11 100-KRFC11 2 0 100-K05...K12 1 100-KFC20 100-KRFC20 0 4 100-K05...K12 1 100-KFC04 100-KRFC04 1 3 100-K05...K12 1 100-KFC13 100-KRFC13 3 1 100-K05...K12 1 100-KFC31 100-KRFC31 2 2 100-K05...K12 1 100-KFC22 100-KRFC22 4 0 100-K05...K12 1 100-KFC40 100-KRFC40 8 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-K/104-K Miniature Contactors Accessories Auxiliary Contact Blocks (Continued) Description Front-mounted Auxiliary Contacts · Auxiliary contact blocks 2- and 4-pole versions · Choice of contact configurations · Snap on, no tools required · Electronic-compatible bifurcated contacts for signals down to 15V/2 mA · Mirror Contact performance per IEC 60947-4-1 Connection Diagrams 51 61 52 62 53 61 54 62 53 63 54 64 51 61 71 81 52 62 72 82 53 61 71 81 54 62 72 82 53 83 61 71 54 84 62 72 53 73 83 61 54 74 84 62 53 63 73 83 54 64 74 84 Cat. No. For Use With Pkg. Qty. N.O. N.C. Screw Type Spring Clamp Terminals Terminals 0 2 100/104-K, 700-K 1 100-KFA02E 100-KRFA02E 1 1 100/104-K, 700-K 1 100-KFA11E 100-KRFA11E 2 0 100/104-K, 700-K 1 100-KFA20E 100-KRFA20E 0 4 100/104-K, 700-K 1 100-KFA04E 100-KRFA04E 1 3 100/104-K, 700-K 1 100-KFA13E 100-KRFA13E 2 2 100/104-K, 700-K 1 100-KFA22Z 100-KRFA22Z 3 1 100/104-K, 700-K 1 100-KFA31Z 100-KRFA31Z 4 0 100/104-K, 700-K 1 100-KFA40E 100-KRFA40E Control Modules Description Mechanical Interlock · For interlocking of two adjacent contactors No added width to contactor assembly · Front mount plug-in type · Optional auxiliary contact blocks and suppressor modules mount onto the interlock 24...48V AC RC Suppressor 110...280V AC Surge Suppressor · Plug-in type · Limits surge voltage on coil drop- MOV Suppressor off 380...480V AC 12...55V AC, 12...77V DC 56...136V AC, 78...180V DC 137...277V AC, 181...250V DC Connection Diagrams For Use With Pkg. Qty. Cat. No. 100/104-K/-KR, 700-K/-KR 1 1(1) 100/104-K/-KR, 700-K/-KR 1(1) 1(1) 1(1) 100/104-K/-KR, 700-K/-KR 1(1) 1(1) 100-KMCH 100-KFSC50 100-KFSC280 100-KFSC480 100-KFSV55 100-KFSV136 100-KFSV277 Diode Suppressor 12...250V DC 100/104-K/-KR, 700-K/-KR 1(1) 100-KFSD250 (1) May be ordered in package quantities of 10. Add letter M to the end of the cat. no. Example: 100-KFSC50M. Timers Description Solid-State Timing Element · 110...250V AC or DC · Includes 35 mm Hat Rail adapter On-Delay, 0.1...3 s On-Delay, 1...30 s Connection Diagrams ~ S1 O / I 1 2 K1 N For Use With Pkg. Qty. 100/104-K, 700-K 10 Cat. No. 100-KT3S 100-KT30S Rockwell Automation Publication 100-TD013J-EN-P - April 2021 9 100-K/104-K Miniature Contactors Accessories Connecting Components Description ECO Connecting Module -- 12 A · For DOL and reversing starters · Eco-starters mount on single DIN Rail (140M on DIN Rail) · Electrical and mechanical interconnection of 140M and 100-K contactors Power Wiring Kit · For Reversing and Star/Delta combinations. Star-point bridge not included. · Min. interruption time 50 ms Connects: 140M-C circuit breakers with 100-K contactors 1 3 5 21 K1M 2 4 6 22 - (L2) 1 3 5 21 K2M 2 4 6 22 Feeder Terminal for Compact Bus Bars · Max. current 34 A Supply of compact bus bars Three-phase Compact Bus Bars · Max. current 34 A · For 100-K, 5...12 A contactors 45 mm spacing (3 connections)(2) 45 mm spacing (4 connections)(2) (1) May be ordered in package quantities of 10. Add letter M to the end of the cat. no. Example: 140M-C-PEK12M. (2) Combinations possible. Example: For 6 contactor connections use one cat. no. 100-KW453 and one cat. no. 100-KW454. Marking Systems Description Label Sheet · 105 self-adhesive paper labels each, 6 x 17 mm For Use With Pkg. Qty. Cat. No. 140M-C to 100-K 1(1) 140M-C-PEK12 100-K 1 100-KPR 100-K 1 100-KWT 100-K, 5...12 A 1 100-K, 5...12 A 1 100-KW453 100-KW454 Pkg. Qty. 10 Cat. No. 100-FMS Snap-In Marker Card 5 1492-M6X12 10 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Specifications 100-K/104-K Miniature Contactors Specifications Table 1 - Main Circuits 100-KR 100/104-K 05 09 05 09 12 AC-1 Active Power Load (50 Hz); Ambient temperature 40 °C (104 °F) Rated Operational Current, Ie 500V 690V [A] 10 [A] 10 10 20 20 20 10 20 20 20 230V [kW] 4 4 8 8 8 240V [kW] 4 4 8.3 8.3 8.3 Rated Operational Power, 400V [kW] 6.9 6.9 14 14 14 Pe 415V [kW] 7 7 14 14 14 500V [kW] 8.7 8.7 17 17 17 690V [kW] 12 12 24 24 24 AC-1 Active Power Load (50 Hz); Ambient temperature 60 °C (140 °F) Rated Operational Current, Ie 500V [A] 10 10 16 16 16 690V [A] 10 10 16 16 16 230V [kW] 4 4 6.4 6.4 6.4 240V [kW] 4 4 6.7 6.7 6.7 Rated Operational Power, 400V [kW] 6.9 6.9 11 11 11 Pe 415V [kW] 7 7 12 12 12 500V [kW] 8.7 8.7 14 14 14 690V [kW] 12 12 19 19 19 Switching of 3-phase Motors; (50 Hz) Ambient temperature 60 °C (140 °F), AC-2, AC-3 230V [A] 6.3 8.5 6.3 11.3 11.3 240V [A] 6.3 8.5 6.3 11.3 11.3 Rated Operational Current, Ie 400V [A] 4.9 8.5 4.9 8.5 11.5 415V [A] 4.9 8.5 4.9 8.5 11.5 500V [A] 3.9 6.8 3.9 6.8 9.2 690V [A] 2.8 4.9 2.8 4.9 6.7 230V [kW] 1.5 2.2 1.5 3 3 240V [kW] 1.5 2.2 1.5 3 3 Rated Operational Power, 400V [kW] 2.2 4 2.2 4 5.5 Pe 415V [kW] 2.2 4 2.2 4 5.5 500V [kW] 2.2 4 2.2 4 5.5 690V [kW] 2.2 4 2.2 4 5.5 Load Carrying Capacity per UL/CSA General Purpose Current (enclosed) [A] 9 9 12 15 18 Rated current (enclosed), 115V 1-phase 230V [A] 7.2 7.2 9.8 9.8 13.8 [A] 6.9 8 8 10 12 Rated power (enclosed), 115V 1-phase 230V [Hp] 1/3 1/3 0.5 0.5 0.75 [Hp] 3/4 1 1 1.5 2 200V [A] 6.9 7.8 6.9 7.8 11 Rated current (enclosed), 230V 3-phase 460V [A] 6 6.8 6 6.8 9.6 [A] 4.8 7.6 4.8 7.6 11 575V [A] 3.9 6.1 3.9 6.1 9 200V [Hp] 1.5 2 1.5 2 3 Rated power (enclosed), 230V [Hp] 1.5 2 1.5 2 3 3-phase 460V [Hp] 3 5 3 5 7.5 575V [Hp] 3 5 3 5 7.5 Table 2 - Main Circuits 100/104-K 05 09 12 Switching of 3-phase Motors, (50 Hz); Ambient temperature 60 °C (140 °F), AC-4 230V [A] 6.3 11.3 11.3 240V [A] 6.3 11.3 11.3 Rated Operational Current, Ie 400V 415V [A] 4.9 8.5 11.5 [A] 4.9 8.5 11.5 500V [A] 3.9 6.8 9.2 690V [A] 2.8 4.9 6.7 230V [Hp] 1.5 3 3 240V [Hp] 1.5 3 3 Rated Operational Power, Pe 400V 415V [Hp] 2.2 4 5.5 [Hp] 2.2 4 5.5 500V [Hp] 2.2 4 5.5 690V [Hp] 2.2 4 5.5 AC-4 at approximately 200,000 operations 230V [A] 2.3 3.9 3.9 Rated Operational Current, Ie 240V 400/415V [A] 2.3 3.9 3.9 [A] 2 3.6 3.6 500V [A] 1.9 3.2 3.2 230V (1) [Hp] 0.37 0.75 0.75 240V (1) [Hp] 0.37 0.75 0.75 Rated Operational Power, Pe 400V (1) [Hp] 0.75 1.5 1.5 415V (1) [Hp] 0.75 1.5 1.5 500V (1) [Hp] 0.75 1.5 1.5 Max. switching frequency Ops/hour 250 250 250 Wye-Delta (60 Hz) 200V [Hp] 2.2 3 5 Rated Operational Power, Pe 230V 460V [Hp] 2.2 3 5 [Hp] 5 7.5 10 575V [Hp] 5 7.5 10 Star-Delta Starting (50 Hz) 230V [A] 11.3 20 20 240V [A] 11.3 20 20 Rated Operational Current, Ie 400V 415V [A] 8.5 15.5 15.5 [A] 8.5 15.5 15.5 500V [A] 6.8 12.4 12.4 690V [A] 4.9 8.9 8.9 230V (1) [kW] 3 5.5 5.5 240V (1) [kW] 3 5.5 5.5 Rated Operational Power, Pe 400V (1) 415V (1) [kW] 4 [kW] 4 7.5 7.5 7.5 7.5 500V (1) [kW] 4 7.5 7.5 690V (1) [kW] 4 7.5 7.5 (1) Power ratings at 50 Hz: Preferred values according to IEC 60072-1 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 11 100-K/104-K Miniature Contactors Specifications Table 3 - Main Circuits 100/104-K 05 09 12 Switching of Power Transformers, AC-6a (50 Hz) Inrush Current = n Rated transformer current 230V [A] 2.9 5.4 5.4 240V [A] 2.9 5.4 5.4 n= 30 400V [A] 2.4 4.1 5.4 415V [A] 2.4 4.1 5.4 500V [A] 1.8 3.2 3.2 230V [kVA] 1.2 2 2 240V [kVA] 1.2 2 2 Apparent Power 400V [kVA] 1.7 2.8 3.4 415V [kVA] 1.7 2.8 3.4 500V [kVA] 1.7 2.8 3.4 690V [kVA] 2 4 5 Switching of Lamps Gas discharge lamps AC-5a, 40 °C (104 °F) open [A] 18 18 18 enclosed [A] 14.5 14.5 14.5 Individually compensated: Max. capacitance at expected Short-circuit current of 10 kA [µF] 750 750 750 20 kA [µF] 400 400 400 Filament AC-5b 230/240V [A] 5 9 9 Switching of Low Inductive Loads in Home Appliances and Similar Applications per IEC 61095 (50 Hz) 230V [A] 20 20 20 AC-7a 400V [A] 20 20 20 Switching of Motor Load for Home Appliances (50 Hz) 230V [A] 6 11 11 AC-7b 400V [A] 6 11 11 Switching of Hermetically Sealed Cooling Compressor Motors - manual reset of overload release (50 Hz) AC-8a 400V [A] 11 18 18 500V [A] 10 15 15 Switching of DC Loads Non-inductive or slightly inductive loads or resistance furnaces DC-1, 60 °C (140 °F) 24V [A] 6 9 9 48/60V [A] 4/1 6/1.5 6/1.5 1 pole 110V [A] 0.6 1 1 220V [A] 0.2 0.3 0.3 440V [A] 0.08 0.1 0.1 24V [A] 6 9 9 48/60V [A] 6 8 8 2 poles in series 110V [A] 4 6 6 220V [A] 0.8 1.2 1.2 440V [A] 0.2 0.3 0.3 24V [A] 6 9 9 48/60V [A] 6 9 9 3 poles in series 110V [A] 6 9 9 220V [A] 3 4 4 440V [A] 0.4 0.6 0.6 Table 3 - Main Circuits (Continued) 100/104-K 05 09 12 Shunt-wound Motors Starting, reverse current braking, reversing, stepping DC-3, 60 °C (140 °F) 24V [A] 5 9 9 48/60V [A] 4 6 6 3 poles in series 110V [A] 2 3 3 220V [A] 0.8 1.2 1.2 440V [A] 0.15 0.2 0.2 Series-wound Motors Starting, reverse current braking, reversing, stepping DC-5, 60 °C (140 °F) 24V [A] 5 9 9 3 poles in series 48/60V 110V [A] 2 3 3 [A] 0.6 1 1 220V [A] 0.1 0.1 0.1 Short Time Withstand ICW, 60 °C (140 °F 10 s [A] 60 96 96 Resistance and Power Dissipation Main current circuit resistance [m] 2.2 2.2 2.2 Power dissipation by all circuits at Ie AC-3/ 400V [W] 0.3 0.9 0.9 Total power dissipation At Ie AC-3/400V AC control DC control (electronic) [W] 2.1 2.7 2.7 [W] 2.9 3.5 3.5 Lifespan Mechanical AC control [Million operations] 15 15 15 Mechanical DC control [Million operations] 15 15 15 Electrical AC-3 (400 V) [Million operations] 0.7 0.7 0.7 Weight Non-Rev. [kg (lbs.)] 0.16 (0.35) AC Rev. [kg (lbs.)] 0.4 (0.88) Non-Rev. [kg (lbs.)] 0.2 (0.44) DC Rev. [kg (lbs.)] 0.48 (1.06) Table 4 - Conductors Conductor Cross Sections - Main Contacts Terminal type 100-KR 05 09 100/104-K 05 09 12 (1) 1 conductor [mm2] 0.50...2.5 2 conductors [mm2] 0.50...2.5 1 conductor [mm2] 0.75...2.5 (2) 2 conductors [mm2] 0.75...2.5 (2) Recommended torque [N·m] -- Cross section per UL/CSA [AWG] 18...14(2) Recommended torque [lb·in] -- (1) Pozidriv No. 2 / Blade No. 3 screw (2) Fine- or coarse-stranded only 0.75...2.5 0.75...2.5 1...4 1...2.5+ 1...4 1.2 18...12 10.6 12 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-K/104-K Miniature Contactors Specifications Table 5 - Short-Circuit Coordination Data(1) 100/104-K 05 09 12 Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) Per IEC 60947-4-1 (contactor and fuses only) DIN Fuses- gG, gL 50 kA Available Fault Current Type "1" (690V) [A] 35 35 35 Type "2" (400V) [A] 16 20 20 Per UL 508 and CSA 22.2 No. 14 (contactor and fuses or circuit breaker only) UL Class K5 and RK5 Fuses 5 kA Available Fault Current UL Listed Combination (600V) [A] 40 40 40 UL Class CC and CSA HRCI-MISC Fuses 50 kA Available Fault Current UL Listed Combination (600V) [A] 30 30 30 UL Class J and CSA HRCI-J Fuses 50 kA Available Fault Current UL Listed Combination (600V) [A] 30 30 30 (1) See the Rockwell Automation Global SCCR Tool at rok.auto/sccr for complete shortcircuit current ratings. Table 6 - Coil Data 100/104-K Operating Limits 50 Hz, 60 Hz, 50/60 Hz pick-up dropout DC (conventional) pick-up dropout Coil Consumption 50 Hz, 60 Hz, 50/60 Hz DC (conventional) Operating Times AC With RC module DC (conventional) With integrated diode pick-up hold-in pick-up hold-in closing delay opening delay closing delay opening delay closing delay opening delay With external diode opening delay (1) For 9, 12, 24, and 110V DC coils 05 09 12 [x Us] [x Us] [x Us] [x Us] 0.85...1.1 0.2...0.75 0.8...1.1 0.7...1.25(1) 0.1...0.75 [VA] [VA/W] [W] [W] 35 5/1.8 cold 3.0, warm 2.6 cold 3.0, warm 2.6 [ms] 15...40 [ms] 15...33 [ms] 15...28 [ms] 18...40 [ms] 6...12 [ms] 8...12 [ms] 35...50 Table 7 - Auxiliary Contacts and Auxiliary Contact Blocks Conventional Coils Internal Front mounted Switching of AC Loads AC-12 Ith at 40 °C (104 °F) [A] 10 10 at 60 °C (140 °F) [A] 6 6 24V [A] 6 3 42/48V [A] 6 3 120V [A] 6 3 230V [A] 3 2 AC-15 at rated voltage of 240V [A] 3 2 400V [A] 1.8 1.2 415V [A] 1.8 1.2 500V [A] 1.4 1.0 690V [A] 1.0 0.6 Switching of DC Loads 24V DC [A] 6 -- 48V DC [A] 4 -- DC-12 L/R < 1 ms resistive loads at 110V DC [A] 0.6 -- 220V DC [A] 0.2 -- 440V DC [A] 0.08 -- 24V DC [A] 4 -- DC-14L/R <15 ms inductive 48V DC [A] 2.5 -- loads with economy resistor in 110V DC [A] 0.4 -- series at 220V DC [A] 0.12 -- 440V DC [A] 0.05 -- 24V DC [A] 2.8 2.3 DC-13 switching electromagnets at 48V DC [A] 1.2 1 110V DC [A] 0.55 0.55 220V DC [A] 0.27 0.27 440V DC [A] 0.15 0.15 Fuse gG [A] 10 10 [A] 10 10 Min. switching capacity according to IEC 60947-5-4 15V/ 10 mA 15V/ 2 mA Load Carrying Capacity per UL/CSA Rated voltage AC [V] max.600 Continuous rating at 40 °C (104 °F) [A] 10 Switching capacity AC [A] A600 B600 Rated voltage DC [V] max.600 Switching capacity DC [A] Q600 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 13 100-K/104-K Miniature Contactors Specifications Table 8 - General Attribute Value Rated Isolation Voltage Ui IEC [V] 690 UL, CSA [V] 600 Rated Impulse Voltage Withstand Uimp [kV] 6 Rated Voltage Ue AC 50/60 Hz [V] 230, 240, 400, 415, 460, 500, 575, 690 DC [V] 24, 48, 110, 220, 440 Insulation Class of the Coil Class F per IEC 60085 Class 105 insulation system per UL 508 Rated coil frequency AC 50/60 Hz, DC Ambient Temperature Storage [ °C ( °F)] -55...+80 (-67...176) Operation at rated voltage [ °C ( °F)] -25...+60 (-13...140) at 70 °C (158 °F) 15% current reduction against 60 °C (140 °F) values Climatic Withstand IEC60068-2-30 Max. Altitude of Installation Site [m] 2000 NN, per IEC60947-4 Protection Class IP2X Single contactor cover -- Contactor with frame terminal block -- Auxiliary contact IP2X Protection against Accidental Contact -- Resistance to Shock IEC60068-2 Resistance to Vibration IEC60068-2 Mechanically Linked Contacts IEC60947-5-1,AnnexL 100-K... (on main device) Mirror Contacts IEC60947-4 Annex F 100-K...+100-KF... Table 9 - Standards Compliance and Certifications Standards Compliance Certifications IEC/EN 60947-1,-4-1,-5-1,-5-4 CE Marked UL 508 CCC CSA 22.2. No. 14 NF F 62-000 cULus Listed (File No. E41850, Guide NLDX, NLDX7) Meets the material restrictions for European Directive 2002/95/IEC-EU-RoHS 14 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-K/104-K Miniature Contactors Life-Load Curves Life-Load Curves Figure 1 - AC-3, Switching of squirrel-cage motors while starting /AC-1, Non- or slightly inductive loads, resistance furnaces 10 Contact Life (millions of operations) 1 100-K12 100-K09 0.1 100-K05 0.01 1 10 100 Rated current Ie AC-3 [A] (Dashed curves - - - - AC-1 only, open) Electrical life; Ue = 400...460V AC Figure 2 - AC-4, Stepping of squirrel-cage motors 10 100-K09; 100-K12 100-K05 1 Contact Life (millions of operations) 0.1 0.01 0.1 1 Rated current Ie AC-4 [A] Electrical life; Ue = 400...460V AC Rockwell Automation Publication 100-TD013J-EN-P - April 2021 10 15 100-K/104-K Miniature Contactors Approximate Dimensions Approximate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. Figure 3 - 100-K Miniature Contactor with 193-K Overload Relay 44.9 (1-25/32) 35 (1-25/64) 4 (5/32) 78.7 (3-7/64) 49 (1-15/16) 35.2 (1-25/64) 50 (1-31/32) 49.2 (1-15/16) 108.2 (4-1/4) 56 (2-13/64) 54 (2-1/8) Figure 4 - Mounting Position 36.9 (1-29/64) 25° 25° 63.5 (2-1/2) 180° 12 *) *) -Minimum distance to grounded parts or walls 16 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100-C/104-C Contactors · Compact sizes from 4...55 kW/5...75 Hp (9...97 A) · Common accessories for all contactor sizes · Front and side mounting of auxiliary contacts · Electronic and pneumatic timing modules · Space-saving coil-mounted control modules · Reversible coil terminations (line or load side) · All devices can be attached to 35 mm DIN mounting Rail · Environmentally friendly materials 100-C Contactor 104-C Reversing Contactor The Bulletin 100-C/104-C IEC contactor family, along with a wide range of common accessories and Bulletin 193 solid-state overload relays, provides the most compact and flexible starter component system available. 3-Pole AC- and DC-operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) Hp (60 Hz) Auxiliary Contacts 40 °C (104 °F) AC-3 AC-1 1-Phase 3-Phase 230V 400/415V 500V 690V 115V 230V 200V 230V 460V 575V N.O. N.C. 1 0 9 32 3 4 4 4 1/2 1-1/12 2 2 5 7-1/12 0 1 1 0 12 32 4 5.5 5.5 5.5 1/2 2 3 3 7-1/2 10 0 1 1 0 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 15 0 1 1 0 23 32 7.5 11 13 10 2 3 5 7-1/2 15 15 0 1 0 0 30 65 10 15 15 15 2 5 7-1/2 10 20 25 1 0 0 1 0 0 37 65 11 18.5/20 20 18.5 3 5 10 10 25 30 1 0 0 1 0 0 43 85 13 22 25 22 3 7-1/2 10 15 30 30 1 0 0 1 0 0 55 85 15 30 30 30 5 10 15 20 40 40 1 0 0 1 0 0 60 100 18.5 32 37 32 5 10 15 20 40 50 1 0 0 1 0 0 72 100 22 40 45 40 5 15 20 25 50 60 1 0 0 1 0 0 85 100 25 45 55 45 7-1/2 15 25 30 60 60 1 0 0 1 0 0 97 130 30 55 55 55 10 20 30 30 75 75 1 0 0 1 Cat. No.(1) 100-C0910 100-C0901 100-C1210 100-C1201 100-C1610 100-C1601 100-C2310 100-C2301 100-C3000 100-C3010 100-C3001 100-C3700 100-C3710 100-C3701 100-C4300 100-C4310 100-C4301 100-C5500 100-C5510 100-C5501 100-C6000 100-C6010 100-C6001 100-C7200 100-C7210 100-C7201 100-C8500 100-C8510 100-C8501 100-C9700 100-C9710 100-C9701 (1) For screwless terminals on 100-C09...C16, add an "R" after the letter "C" in the catalog number. Example: Cat. No. 100-C0910 becomes 100-CR0910. The AC-1 rating for the 100-CR is limited to 25 A. Coil voltage code and terminal position--see page 19 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 17 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100-C/104-C Contactors 4-Pole AC- and DC-Operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 3-phase kW (50 Hz)(2) Hp (60 Hz) Contact Configuration, Main Poles 40 °C (104 °F) 230V 400/415V 500V 690V 1-Phase 3-Phase(2) AC-3 AC-1 115V 230V 200V 230V 460V 575V N.O. N.C. Cat. No.(1) 4 0 100-C09400 9 32 3 4 4 4 1/2 1-1/2 2 2 5 7-1/2 3 1 100-C09300 2 2 100-C09200 4 0 100-C12400 12 32 4 5.5 5.5 5.5 1/2 2 3 3 7-1/2 10 3 2 4 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 10 3 2 4 23 32 7.5 11 13 10 2 3 5 7-1/2 15 15 3 2 4 37 75 11 18.5/20 20 18.5 3 5 10 10 25 30 2 4 85 130 25 45 55 45 7-1/2 15 25 30 60 50 2 1 100-C12300 2 100-C12200 0 100-C16400 1 100-C16300 2 100-C16200 0 100-C23400 1 100-C23300 2 100-C23200 0 100-C40400 2 100-C40200 0 100-C90400 2 100-C90200 (1) For screwless terminals on 100-C09...C16, add an "R" after the letter "C" in the catalog number. Example: Cat. No. 100-C0910 becomes 100-CR0910. The AC-1 rating for the 100-CR is limited to 25 A. (2) Three-phase ratings apply only to contactors with at least three N.O. power poles. Coil voltage code and terminal position-- see page 19. Reversing AC- and DC-Operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) Hp (60 Hz) Auxiliary Contacts per Contactor 40 °C (104 °F) AC-3 AC-1 1-Phase 3-Phase 230V 400/415V 500V 690V 115V 230V 200V 230V 460V 575V N.O. N.C. (1) 9 32 3 4 4 4 1/2 1-1/2 2 2 5 7-1/2 1 1 12 32 4 5.5 5.5 5.5 1 2 3 3 7-1/2 10 1 1 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 15 1 1 23 32 7.5 11 13 10 2 3 5 7-1/2 15 20 1 1 0 1 30 65 10 15 15 15 2 5 7-1/2 10 20 25 1 1 0 1 37 65 11 18.5/20 20 18.5 3 5 10 10 25 30 1 1 0 1 43 85 13 22 25 22 3 7.5 10 15 30 30 1 1 0 1 55 85 15 30 30 30 5 10 15 20 40 40 1 1 0 1 60 100 18.5 32 37 32 5 10 15 20 40 50 1 1 0 1 72 100 22 40 45 40 5 15 20 25 50 60 1 1 0 1 85 100 25 45 55 45 7-1/2 15 25 30 60 60 1 1 0 1 97 130 30 55 55 55 10 15 30 30 75 75 1 1 (1) The N.C. auxiliary contact is supplied as part of the mechanical/electrical interlock. Coil voltage code and terminal position-- see page 19. Cat. No. 104-C0922 104-C1222 104-C1622 104-C2322 104-C3002 104-C3022 104-C3702 104-C3722 104-C4302 104-C4322 104-C5502 104-C5522 104-C6002 104-C6022 104-C7202 104-C7222 104-C8502 104-C8522 104-C9702 104-C9722 18 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100-C/104-C Contactors Coil Voltage Codes The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60 Hz: Cat. No. 100-C0910 becomes Cat. No.100-C09D10. AC Voltages [V] 12 24 32 36 42 48 100 100... 110 110 120 127 200 200... 220 208 208... 240 50 Hz R K V W X Y KP -- D P S KG L -- -- 60 Hz Q J -- V -- X -- KP -- D -- -- KG H L 50/60 Hz -- KJ -- -- -- KY KP -- KD -- -- KG KL(1) -- -- (1) Not available on 100/104-C90 or -C97 contactors. AC Voltages [V] 220... 230 230 230... 240 240 277 347 380 380... 400 400 400... 415 440 480 500 550 600 50 Hz F -- VA T -- -- -- N -- G B -- M C -- 60 Hz -- -- -- A T I E -- -- -- N B -- -- C 50/60 Hz KL(1) KF -- KA -- -- -- -- KN -- KB -- -- -- -- (1) Not available on 100/104-C90 or -C97 contactors. DC Voltages [V] 9 12 24 24 36 36...48 48 48...72 60 64 100-C09...C55 Electronic with Integrated Diode -- EQ EJ QJ(1) -- EW -- EY -- -- 100-C60...C97 with Integrated Diode DR DQ DJ -- DW -- DY -- DZ DB (1) "QJ" coil has faster dropout time (16...21 ms). DC Voltages [V] 72 80 110 110...125 115 125 220 220...250 230 250 100-C09...C55 Electronic with Integrated Diode -- -- -- ED -- -- -- EA -- -- 100-C60...C97 with Integrated Diode DG DE DD -- DP DS DA -- DF DT Coil Terminal Position All contactors are delivered with the coil terminals located on the line side. For load side coil terminations, insert a "U" prior to the coil voltage code. Ordering example: Cat. No. 100-C09UD10. Cat. No.100-C0910 Line Side Cat. No.100-C09U10 Load Side Rockwell Automation Publication 100-TD013J-EN-P - April 2021 19 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100-C/104-C Contactors Assignment of Contacts Table valid for: AC / DC = 0.85...1.1 x Us, Tamb = -25 °C...+60 °C (-13...140 °F), normal position (horizontal rail mounting) Device Combinations in Accordance with IEC 60947-1 / -4-1 Auxiliary Contact Blocks Circuit Diagram Control 100-C09_10 100-C12_10 100-C16_10 100-C23_10 100-C Contactors (AC and DC Control) 100-C09_01 100-C12_01 100-C16_01 100-C23_01 100-C30_00 100-C37_00 100-C43_00 100-C55_00 100-C60_00 100-C72_00 100-C85_00 100-C97_00 100-C09_400 100-C12_400 100-C16_400 100-C23_400 100-C40_400 100-C90_400 100-C09_300 100-C12_300 100-C16_300 100-C23_300 100-C09_200 100-C12_200 100-C16_200 100-C23_200 100-C40_200 100-C90_200 Side Mounting (1) A1 1 K1 A2 2 3 5 13 4 6 14 A1 1 3 5 21 K1 A2 2 4 6 22 A1 1 3 5 K1 A2 2 4 6 A1 1 3 5 7 A1 1 3 5 R7 A1 1 R3 R5 7 K1 K1 K1 A2 2 4 6 8 A2 2 4 6 R8 A2 2 R4 R6 8 21 100-SB01 AC/DC 10 + 01 = 11 01 + 01 = 02 (2) 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01 22 100-SB10 13 AC/DC 10 + 10 = 20 (2) 01 + 10 = 11 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10 14 35 47 36 48 33 43 34 44 31 43 32 44 31 41 32 42 43 44 31 32 11 21 100-SB02 AC/DC 10 + 02 = 12 (2) -- 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 12 22 100-SB11 13 21 AC/DC 10 + 11 = 21 (2) 01 + 11 = 12 (2) 00 + 11 = 11 14 22 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 13 23 100-SB20 AC/DC 10 + 20 = 30 (2) 01 + 20 = 21 (2) 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 14 24 17 25 100-SBL11 (3) 18 26 AC/DC 10 + L11 = L21 (2) 01 + L11 = L12 (2) 00 + L11 = L11 00 + L11 = L11 00 + L11 = L11 (1) Up to 8 auxiliary contacts possible: contactor + front mounted (AC max. 4 N.C. / DC max. 4 N.C.), side mounted (AC max. 2 N.O. / DC max. 2 N.O. and max. 2 N.C.). (2) Double numbering: because of double numbering only left-side mounting is recommended. (3) Early make and/or late break. 00 + L11 = L11 20 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100-C/104-C Contactors Device Combinations in Accordance with IEC 60947-1 / -4-1 Auxiliary Contact Blocks Circuit Diagram Control 100-C09_10 100-C12_10 100-C16_10 100-C23_10 100-C Contactors (AC and DC Control) 100-C09_01 100-C12_01 100-C30_00 100-C37_00 100-C43_00 100-C55_00 100-C09_400 100-C12_400 100-C16_400 100-C16_01 100-C23_01 100-C60_00 100-C72_00 100-C85_00 100-C97_00 100-C23_400 100-C40_400 100-C90_400 100-C09_300 100-C12_300 100-C16_300 100-C23_300 100-C09_200 100-C12_200 100-C16_200 100-C23_200 100-C40_200 100-C90_200 Front Mounting (1) A1 1 3 5 13 A1 1 3 5 21 K1 K1 A2 2 4 6 14 A2 2 4 6 22 A1 1 3 5 K1 A2 2 4 6 A1 1 3 5 7 A1 1 3 5 R7 A1 1 R3 R5 7 K1 K1 K1 A2 2 4 6 8 A2 2 4 6 R8 A2 2 R4 R6 8 100-FA02, 100-FAB02 100-FA11, 100-FAB11 100-FB11, 100-FBB11 100-FC11, 100-FCB11 51 61 52 62 53 61 54 62 13 21 14 22 23 31 24 32 AC/DC AC/DC AC/DC AC/DC 10 + 02 = 12 10 + 11 = 21 -- 10 + 11 = 21 01 + 02 = 03 01 + 11 = 12 -- -- 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 100-FA20, 100-FAB20 53 63 54 64 AC/DC 10 + 20 = 30 01 + 20 = 21 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 17 25 100-FBL11 (2) AC/DC -- 18 26 -- 00 + L11 = L11 00 + L11 = L11 00 + L11 = L11 100-FA22, 100-FAB22 53 61 71 83 54 62 72 84 AC/DC 10 + 22 = 32 01 + 22 = 23 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22 100-FB22, 100-FBB22 13 21 31 43 AC/DC -- 14 22 32 44 -- 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22 100-FC22, 100-FCB22 21 31 43 53 AC/DC 10 + 22 = 32 -- -- -- -- 22 32 44 54 100-FA31, 100-FAB31 53 61 73 83 54 62 74 84 AC/DC 10 + 31 = 41 01 + 31 = 32 00 + 31 = 31 00 + 31 = 31 00 + 31 = 31 100-FA40, 100-FAB40 53 63 73 83 54 64 74 84 AC/DC 10 + 40 = 50 01 + 40 = 41 00 + 40 = 40 00 + 40 = 40 00 + 40 = 40 100-FAL22 (2) 53 61 75 87 54 62 76 88 AC/DC 10 + L22 = L32 01 + L22 = L23 00 + L22 = L22 00 + L22 = L22 00 + L22 = L22 100-FA04, 100-FAB04 51 61 71 81 52 62 72 82 AC/DC 10 + 04 = 14 01 + 04 = 05 00 + 04 = 04 00 + 04 = 04 00 + 04 = 04 100-FA13, 100-FAB13 53 61 71 81 54 62 72 82 AC/DC 10 + 13 = 23 01 + 13 = 14 00 + 13 = 13 00 + 13 = 13 00 + 13 = 13 100-FB02, 100-FBB02 11 21 12 22 AC/DC 10 + 02 = 12 01 + 02 = 03 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 100-FB20, 100-FBB20 13 23 14 24 AC/DC 10 + 20 = 30 01 + 20 = 21 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 100-FC31, 100-FCB31 23 31 43 53 24 32 44 54 AC/DC 10 + 31 = 41 01 + 31 = 32 00 + 31 = 31 00 + 31 = 31 00 + 31 = 31 (1) Up to 8 auxiliary contacts possible: contactor + front mounted (AC max. 4 N.C. / DC max. 4 N.C.), side mounted (AC max. 2 N.O. / DC max. 2 N.O. and max. 2 N.C.). (2) Early make and/or late break. 00 + 20 = 20 00 + L11 = L11 00 + 22 = 22 00 + 22 = 22 -- 00 + 31 = 31 00 + 40 = 40 00 + L22 = L22 00 + 04 = 04 00 + 13 = 13 00 + 02 = 02 00 + 20 = 20 00 + 31 = 31 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 21 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Product Selection--100S-C/104S-C Safety Contactors · Mechanically linked N.C. auxiliary contacts · Front-mounted auxiliary contacts - Gold bifurcated - Protective cover to prevent manual operation - Permanently fixed - Red contact housing for easy identification - "Mechanically Linked" or "Mirror Contact" symbol · AC and DC operating coils · SUVA Third-party certification · Reversing contactors: 100S-C Safety Contactor - 3 Main contacts - Include reversing power wiring · Include mechanical/electrical Interlock 104S-C Reversing Safety Contactor Bulletin 100S-C/104S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts do not change state when a power pole welds. In addition, the goldplated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple seriesconnected N.C. auxiliary contacts. 3-Pole AC- and DC-operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) Hp (60 Hz) Auxiliary Contacts 40 °C (104 °F) 230V 400/415V 500V 690V 1-Phase 3-Phase Cat. No.(1) (2) AC-3 AC-1 115V 230V 200V 230V 460V 575V N.O. N.C. 0 5 100S-C0905BC 9 32 3 4 4 4 1/2 1-1/2 2 2 5 7-1/2 1 4 100S-C0914BC 0 5 100S-C1205BC 12 32 4 5.5 5.5 5.5 1/2 2 3 3 7-1/2 10 1 4 100S-C1214BC 0 5 100S-C1605BC 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 15 1 4 100S-C1614BC 0 5 100S-C2305BC 23 32 7.5 11 13 10 2 3 5 7-1/2 15 15 1 4 100S-C2314BC 0 4 100S-C3004BC 30 65 10 15 15 15 2 5 7-1/2 10 20 25 1 4 100S-C3014BC 0 4 100S-C3704BC 37 65 11 18.5/20 20 18.5 3 5 10 10 25 30 1 4 100S-C3714BC 0 4 100S-C4304BC 43 85 13 22 25 22 3 7-1/2 10 15 30 30 1 4 100S-C4314BC 0 4 100S-C5504BC 55 85 15 30 30 30 5 10 15 20 40 40 1 4 100S-C5514BC 0 4 100S-C6004BC(3) 60 100 18.5 32 37 32 5 10 15 20 40 50 1 4 100S-C6014BC(3) 0 4 100S-C7204BC(3) 72 100 22 40 45 40 5 15 20 25 50 60 1 4 100S-C7214BC(3) 0 4 100S-C8504BC(3) 85 100 25 45 55 45 7-1/2 15 25 30 60 60 1 4 100S-C8514BC(3) 0 4 100S-C9704BC(3) 97 130 30 55 55 55 10 15 30 30 75 75 1 4 100S-C9714BC(3) (1) For other contact configurations and full product details, please contact your local Rockwell Automation sales office or Allen-Bradley distributor. (2) If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C0905BC becomes Cat. No. 100S-C0905C. (3) Front- and side-mount auxiliary contacts on Cat. Nos. 100S-C60...C97 conform to mirror contact performance only. Coil voltage code and terminal position-- see page 25. 22 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors 4-Pole AC- and DC-operated Contactors Rated Operational Current Ie [A] Ratings for Switching AC Motors AC-2, AC-3, AC-4 3-Phase kW (50 Hz)(3) Hp (60 Hz) 40 °C (104 °F) 230V 400V/ 415V 500V 690V 1-Phase 3-Phase(3) Contact Configuration Main Pole Auxiliary Contacts Cat. No.(1) (2) AC-3 AC-1 115V 230V 200V 230V 460V 575V N.O. N.C. N.O. N.C. 4 0 0 4 100S-C09404BC 9 32 3 4 4 4 1/2 1-1/2 2 2 5 7-1/2 3 1 0 4 100S-C09304BC 4 0 0 4 100S-C12404BC 12 32 4 5.5 5.5 5.5 1/2 2 3 3 7-1/2 10 3 1 0 4 100S-C12304BC 4 0 0 4 100S-C16404BC 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 15 3 1 0 4 100S-C16304BC 4 0 0 4 100S-C23404BC 23 32 7.5 11 13 10 2 3 5 7-1/2 15 15 3 1 0 4 100S-C23304BC (1) For other contact configurations and full product details, please contact your local Rockwell Automation sales office or Allen-Bradley distributor. (2) If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C09404BC becomes Cat. No. 100S-C09404C. (3) Three-phase ratings only apply to contactors with at least three N.O. power poles. Coil voltage code and terminal position-- see page 25. Rockwell Automation Publication 100-TD013J-EN-P - April 2021 23 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Reversing AC- and DC-operated Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3, AC-4 3-phase kW (50 Hz) Hp (60 Hz) Auxiliary Contacts 40 °C (104 °F) 230V 400/ 415V 500V 690V 1-Phase 3-Phase Cat. No.(1) (2) AC-3 AC-1 115V 230V 200V 230V 460V 575V N.O. N.C.(3) 0 6 104S-C09012BC 9 32 3 4 4 4 1/2 1-1/2 2 2 5 7-1/2 1 5 104S-C09210BC 0 6 104S-C12012BC 12 32 4 5.5 5.5 5.5 1/2 2 3 3 7-1/2 10 1 5 104S-C12210BC 0 6 104S-C16012BC 16 32 5.5 7.5 7.5 7.5 1 3 5 5 10 15 1 5 104S-C16210BC 0 6 104S-C23012BC 23 32 7.5 11 13 10 2 3 5 7-1/2 15 15 1 5 104S-C23210BC 30 65 10 15 15 15 2 0 5 104S-C30010BC 5 7-1/2 10 20 25 1 5 104S-C30210BC 0 5 104S-C37010BC 37 65 11 18.5/20 20 18.5 3 5 10 10 25 30 1 5 104S-C37210BC 0 5 104S-C43010BC 43 85 13 22 25 22 3 7-1/2 10 15 30 30 1 5 104S-C43210BC 55 85 15 30 30 30 5 0 5 104S-C55010BC 10 15 20 40 40 1 5 104S-C55210BC 0 5 104S-C60010BC(4) 60 100 18.5 32 37 32 5 10 15 20 40 50 1 5 104S-C60210BC(4) 72 100 22 40 45 40 5 0 5 104S-C72010BC(4) 15 20 25 50 60 1 5 104S-C72210BC(4) 0 5 104S-C85010BC(4) 85 100 25 45 55 45 7-1/2 15 25 30 60 60 1 5 104S-C85210BC(4) 97 130 30 55 55 55 10 15 30 30 75 75 0 5 104S-C97010BC(4) 1 5 104S-C97210BC(4) (1) For other contact configurations and full product details, please contact your local Rockwell Automation sales office or Allen-Bradley distributor. (2) If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 104S-C0905BC becomes Cat. No. 104S-C0905C. (3) One of the N.C. auxiliary contacts is supplied as part of the mechanical/electrical interlock. (4) Front- and side-mount auxiliary contacts on Cat. Nos. 104S-C60...C97 conform to mirror contact performance only. Coil voltage code and terminal position-- see page 25. 24 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Coil Voltage Codes The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60 Hz: Cat. No. 100S-C0905BC becomes Cat. No.100S-C09D05BC. AC Voltages [V] 12 24 32 36 42 48 100 100... 110 110 120 127 200 200... 220 208 208... 240 50 Hz R K V W X Y KP -- D P S KG L -- -- 60 Hz Q J -- V -- X -- KP -- D -- -- KG H L 50/60 Hz -- KJ -- -- -- KY KP -- KD -- -- KG KL(1) -- -- (1) Not available on 100S/104S-C97 contactors. AC Voltages [V] 220... 230 230 230... 240 240 277 347 380 380... 400 400 400... 415 440 480 500 550 600 50 Hz F -- VA T -- -- -- N -- G B -- M C -- 60 Hz -- -- -- A T I E -- -- -- N B -- -- C 50/60 Hz KL(1) KF -- KA -- -- -- -- KN -- KB -- -- -- -- (1) Not available on 100S/104S-C97 contactors. DC Voltages [V] 9 12 24 24 36 36...48 48 48...72 60 64 100S-C09...C55 Electronic with Integrated Diode -- EQ EJ QJ(1) -- EW -- EY -- -- 100S-C60...C97 with Integrated Diode DR DQ DJ -- DW -- DY -- DZ DB (1) "QJ" coil has faster dropout time (16...21 ms). DC Voltages [V] 72 80 110 110...125 115 125 220 220...250 230 250 100S-C09...C55 Electronic with Integrated Diode -- -- -- ED -- -- -- EA -- -- 100S-C60...C97 with Integrated Diode DG DE DD -- DP DS DA -- DF DT Coil Terminal Position All contactors are delivered with the coil terminals located on the line side. For load side coil terminations, insert a "U" prior to the coil voltage code. Ordering example: Cat. No. 100S-C09UD05BC. Cat. No.100S-C0905CLine Side Cat. No.100S-C09U05CLoad Side Rockwell Automation Publication 100-TD013J-EN-P - April 2021 25 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Assignment of Contacts Figure 5 - Safety Contactors with 3 Main Contacts and Standard Front-mount Auxiliary Contacts 51 61 71 81 51 61 71 81 52 62 72 82 A1 1 3 5 21 K1 A2 2 4 6 22 100S-C0905C...C2305C 11 21 31 41 52 62 72 82 A1 1 3 5 13 K1 A2 2 4 6 14 100S-C0914C...C2314C 13 21 31 43 12 22 32 42 A1 1 3 5 K1 A2 2 4 6 100S-C3004C...C5504C 11 21 31 41 14 22 32 44 A1 1 3 5 K1 A2 2 4 6 100S-C3022C...C5522C 13 21 31 43 12 22 32 42 14 22 32 44 A1 1 3 5 K1 A1 1 3 5 K1 A2 2 4 6 100S-C6004C...C9704C A2 2 4 6 100S-C6022C...C9722C Figure 6 - Safety Contactors with 4 Main Contacts and Standard Front-mount Auxiliary Contacts 53 61 71 83 54 62 72 84 A1 1 3 5 21 K1 A2 2 4 6 22 100S-C0923C...C2323C 11 21 31 41 12 22 32 42 A1 1 3 5 _3 K1 A2 2 4 6 _4 100S-C3014C...C5514C 11 21 31 41 12 22 32 42 A1 1 3 5 _3 K1 A2 2 4 6 _4 100S-C6014C...C9714C 11 21 31 41 12 22 32 42 A1 1 3 5 7 K1 A2 2 4 6 8 100S-C09404C...C23404C 13 21 31 43 14 22 32 44 A1 1 3 5 7 K1 A2 2 4 6 8 100S-C09422C...C23422C 11 21 31 41 12 22 32 42 A1 1 3 5 R7 K1 A2 2 4 6 R8 100S-C09304C...C23304C 13 21 31 43 14 22 32 44 A1 1 3 5 R7 K1 A2 2 4 6 R8 100S-C09322C...C23322C 26 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Figure 7 - Safety Reversing Contactors with 3 Main Contacts and Standard Front-mount Auxiliary Contacts 51 61 71 81 21 51 61 71 81 51 61 71 81 21 51 61 71 81 52 62 72 82 22 52 62 72 82 A1 1 3 5 21 21 A1 1 3 5 21 K1 K2 A2 2 4 6 22 22 A2 2 4 6 22 104S-C09012C...C23012C 52 62 72 82 22 52 62 72 82 A1 1 3 5 13 21 A1 1 3 5 13 K1 K2 A2 2 4 6 14 22 A2 2 4 6 14 104S-C09210C...C23210C 11 21 31 41 21 11 21 31 41 11 21 31 41 21 11 21 31 41 12 22 32 42 22 12 22 32 42 A1 1 3 5 K1 21 A1 1 K2 35 A2 2 4 6 22 A2 2 4 6 104S-C30010C...C55010C 12 22 32 42 22 12 22 32 42 A1 1 3 5 _3 21 A1 1 3 5 _3 K1 K2 A2 2 4 6 _4 22 A2 2 4 6 _4 104S-C30210C...C55210C 11 21 31 41 21 11 21 31 41 11 21 31 41 21 11 21 31 41 12 22 32 42 22 12 22 32 42 A1 1 3 5 K1 21 A1 1 3 5 K1 A2 2 4 6 22 A2 2 4 6 104S-C60010C...C97010C 12 22 32 42 22 12 22 32 42 A1 1 3 5 _3 21 A1 1 3 5 _3 K1 K1 A2 2 4 6 _4 22 A2 2 4 6 _4 104S-C60210C...C97210C Rockwell Automation Publication 100-TD013J-EN-P - April 2021 27 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Figure 8 - Safety Contactors with 3 Main Contacts and Bifurcated Front-mount Auxiliary Contacts 51 61 71 81 51 61 71 81 53 61 71 83 52 62 72 82 A1 1 3 5 21 K1 A2 2 4 6 22 100S-C0905BC...C2305BC 11 21 31 41 52 62 72 82 A1 1 3 5 13 K1 A2 2 4 6 14 100S-C0914BC...C2314BC 13 21 31 43 54 62 72 84 A1 1 3 5 21 K1 A2 2 4 6 22 100S-C0923BC...C2323BC 11 21 31 41 12 22 32 42 A1 1 K1 35 A2 2 4 6 100S-C3004BC...C5504BC 11 21 31 41 14 22 32 44 A1 1 3 5 K1 A2 2 4 6 100S-C3022BC...C5522BC 13 21 31 43 12 22 32 42 A1 1 3 5 _3 K1 A2 2 4 6 _4 100S-C3014BC...C5514BC 11 21 31 41 12 22 32 42 14 22 32 44 12 22 32 42 A1 1 K1 35 A2 2 4 6 100S-C6004BC...C9704BC A1 1 3 5 K1 A2 2 4 6 100S-C6022BC...C9722BC A1 1 3 5 _3 K1 A2 2 4 6 _4 100S-C6014BC...C9714BC Figure 9 - Safety Contactors with 4 Main Contacts and Bifurcated Front-mount Auxiliary Contacts 11 21 31 41 11 21 31 41 12 22 32 42 A1 1 3 5 7 K1 A2 2 4 6 8 100S-C09404BC...C23404BC 13 21 31 43 12 22 32 42 A1 1 3 5 R7 K1 A2 2 4 6 R8 100S-C09304BC...C23304BC 13 21 31 43 14 22 32 44 A1 1 3 5 7 K1 A2 2 4 6 8 100S-C09422BC...C23422BC 14 22 32 44 A1 1 3 5 R7 K1 A2 2 4 6 R8 100S-C09322BC...C23322BC 28 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100S-C/104S-C Safety Contactors Figure 10 - Safety Reversing Contactors with 3 Main Contacts and Bifurcated Front-mount Auxiliary Contacts 51 61 71 81 21 51 61 71 81 51 61 71 81 21 51 61 71 81 52 62 72 82 22 52 62 72 82 A1 1 3 5 21 K1 21 A1 1 3 5 21 K2 A2 2 4 6 22 22 A2 2 4 6 22 104S-C09012BC...C23012BC 52 62 72 82 22 52 62 72 82 A1 1 3 5 13 K1 21 A1 1 3 5 13 K2 A2 2 4 6 14 22 A2 2 4 6 14 104S-C09210BC...C23210BC 11 21 31 41 21 11 21 31 41 11 21 31 41 21 11 21 31 41 12 22 32 42 22 12 22 32 42 12 22 32 42 22 12 22 32 42 A1 1 3 5 21 A1 1 3 5 A1 1 3 5 _3 21 A1 1 3 5 _3 K1 K2 K1 K2 A2 2 4 6 22 A2 2 4 6 104S-C30010BC...C55010BC A2 2 4 6 _4 22 A2 2 4 6 _4 104S-C30210BC...C55210BC 11 21 31 41 21 11 21 31 41 11 21 31 41 21 11 21 31 41 12 22 32 42 22 12 22 32 42 A1 1 3 5 21 A1 1 3 5 K1 K1 A2 2 4 6 22 A2 2 4 6 104S-C60010BC...C97010BC 12 22 32 42 22 12 22 32 42 A1 1 3 5 _3 21 A1 1 3 5 _3 K1 K1 A2 2 4 6 _4 22 A2 2 4 6 _4 104S-C60210BC...C97210BC Rockwell Automation Publication 100-TD013J-EN-P - April 2021 29 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Product Selection--100Q-C Capacitor-switching Contactors Product Selection--100Q-C Capacitor-switching Contactors · Compact sizes · Limits high inrush currents · AC and DC coil control · Reversible coil terminals · Panel or 35 mm DIN Rail mounting · Environmentally friendly materials The Bulletin 100Q-C Capacitor-Switching contactors are designed for switching banks of capacitors. The unique design uses front-mounted resistor elements that limit the severely high inrush currents seen in these applications. This reduces stress to the contactors and the capacitors, as well as allowing a more compact and economical design without the use of air-core reactors. For Applications per IEC 60947-4 (AC-6b) Ratings for Switching Capacitor Banks @ 40 °C (104 °F) 1-Phase 50 Hz [kVAR] 3-Phase 50 Hz [kVAR] 230V 240V 400V 415V 500V 690V 230V 240V 400V 415V 500V 690V 5 5 8.5 9 10.5 15 8.5 8.5 15 15.5 18.5 25 8 8.5 14 14.5 17.5 24 14 14 25 25 30 40 Aux. Contacts N.O. N.C. 1 1 2 0 1 1 2 0 Cat. No. 100Q-C1611 100Q-C1620 100Q-C3711 100Q-C3720 For Applications per UL/CSA 1-Phase 60 Hz [kVAR] 115V 230V 200V 2.2 4.5 6.5 3.6 7.5 11 Ratings for Switching Capacitor Banks 3-Phase 60 Hz [kVAR] 230V 460V 600V 7.5 15 18.5 12.5 20 25 Aux. Contacts N.O. N.C. 1 1 2 0 1 1 2 0 Cat. No. 100Q-C1611 100Q-C1620 100Q-C3711 100Q-C3720 Coil Voltage Codes The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60 Hz: Cat. No. 100Q-C1611 becomes Cat. No.100Q-C16D11. AC Voltages [V] 12 24 32 36 42 48 100 100...110 110 120 127 200 200...220 208 208...240 50 Hz R K V W X Y KP -- D P S KG L -- -- 60 Hz Q J -- V -- X -- KP -- D -- -- KG H L 50/60 Hz -- KJ -- -- -- KY KP -- KD -- -- KG KL -- -- AC Voltages [V] 220...230 230 230...240 240 277 347 380 380...400 400 400...415 440 480 500 550 600 50 Hz F -- VA T -- -- -- N -- G B -- M C -- 60 Hz -- -- -- A T I E -- -- -- N B -- -- C 50/60 Hz KL KF -- KA -- -- -- -- KN -- KB -- -- -- -- DC Voltages [V] 9 12 24 36 48 60 64 72 80 110 110...125 115 125 220 220...250 230 250 Electronic with Integrated Diode -- EQ EJ -- -- -- -- -- -- -- ED -- -- -- EA ---- Maximum Operational Rates · 100Q-C16 200 operations/hour · 100Q-C37 100 operations/hour 30 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Accessories 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Accessories Auxiliary Contact Blocks Description(1) Auxiliary Contact Blocks for Front Mounting · 2- and 4-pole · Quick and easy mounting without tools · Electronic-compatible contacts down to 17V, 5mA · Mechanically linked performance between N.O. and N.C. poles and to the main contactor poles (except for L types) · Models with equal function with several terminal numbering choices · 1L = Late break N.C. / early make N.O. · Bifurcated version for switching down to 5V, 3 mA also available Auxiliary Contact Blocks for Side Mounting without Sequence Terminal Designations · 1- and 2-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Electronic-compatible contacts down to 17V, 10 mA · Mirror contact performance to the main contactor poles · 1L = Late break N.C. / early make N.O. Connection Diagrams For Use With N.O. N.C. 100-C all 0 2 C3000...C9700 100-C all 1 1 C3000...C9700 C0910...C2310 100-C all 20 C3000...C9700 100-C all 1L 1L C3000...C9700 04 100-C all 13 100-C all 100-C all 2 2 C3000...C9700 C0910...C2310 100-C all 31 C0910...C2310 40 100-C all 1 + 1L 1+1L 100-C all 01 100-C all 10 100-C all 02 100-C all 11 100-C all 20 100-C all Cat. No. Standard Auxiliary Contact(2) 100-FA02 100-FB02 100-FA11 100-FB11 100-FC11 100-FA20 100-FB20 100-FAL11 100-FBL11 100-FA04 100-FA13 100-FA22 100-FB22 100-FC22 100-FA31 100-FC31 100-FA40 100-FAL22 100-SA01 100-SA10 100-SA02 100-SA11 100-SA20 Bifurcated Auxiliary Contact 100-FAB02 100-FBB02 100-FAB11 100-FBB11 100-FCB11 100-FAB20 100-FBB20 -- -- 100-FAB04 100-FAB13 100-FAB22 100-FBB22 100-FCB22 100-FAB31 100-FCB31 100-FAB40 -- -- -- -- -- -- 1L 1L 100-C all 100-SAL11 -- Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations · 1- and 2-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Electronic-compatible contacts down to 17V, 10 mA · Mirror contact performance to the main contactor poles · 1L = Late break N.C. / early make N.O. 01 100-C 100-SB01 -- 10 100-C(3) 100-SB10 -- 02 100-C(3) 100-SB02 -- 11 100-C(3) 100-SB11 -- 20 100-C(3) 100-SB20 -- 1L 1L 100-C(3) 100-SBL11 -- (1) Max. number of auxiliary contacts that may be mounted: AC and 24V DC electronic coil contactors--max. 4 N.O contacts on the front of the contactor, 2 N.O. contacts on the side, 4 N.C. front or side, 6 total. DC Coil contactors--max. 4 N.O. contacts on the front of the contactor or max. 2 N.O. contacts on the side, 4 N.C. front or side, 4 total. (2) For screwless terminals (front mount only), insert "CR" after the "100-" in the catalog number. Example: Cat. No. 100-FA02 becomes Cat. No. 100-CRFA02. (3) Double numbering--Left-side mounting only is recommended for Cat. No. 100-C09...100-C23 due to double numbering. Rockwell Automation Publication 100-TD013J-EN-P - April 2021 31 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Accessories Control Modules Timers Description Pneumatic Timing Modules On-Delay · Pneumatic timing element contacts switch after the delay time. The contacts on the main control relay continue to operate without delay Off-Delay 0.3...30 s 2...180 s 0.3...30 s 2...180 s 0.1...3 s 1...30 s Electronic Timing Modules -- On-delay · Delay of the contactor or control relay solenoid. The contactor or control relay is energized at the end of the delay time. 10...180 s 0.1...3 s 1...30 s 10...180 s Connection Diagrams For Use With 100-C or 700-CF with AC or 24V DC electronic coils(1) 100-C all, 700-CF all 100-C or 700-CF with 110...240V, 50/60Hz coils Cat. No. 100-FPTA30 100-FPTA180 100-FPTB30 100-FPTB180 100-ETA3 100-ETA30 100-ETA180 100-C or 700-CF with 24VDC coils 100-ETAZJ3 100-ETAZJ30 100-ETAZJ180 Electronic Timing Modules -- Off-delay · Delay of the contactor or control relay solenoid. After interruption of the control signal, the contactor or control relay is de-energized at the end of the delay time. 0.3...3 s 1...30 s 10...180 s 0.3...3 s 1...30 s 10...180 s 100-C09...C37 or 700CF with 24V 50/60Hz 100-C or 700-CF with 110...240V 50/60Hz coils 100-ETBKJ3 100-ETBKJ30 100-ETBKJ180 100-ETB3 100-ETB30 100-ETB180 Electronic Timing Modules · Delay of the contactor solenoid. Contactor K 3(Y) is deenergized (off) and K 2 () is energized (on) after the end of the set Y end time. (Switching delay at 50 ms.) · Continuous adjustment range · High repeat Transition Time Y Contactor 1...30 s 100-C with 110...240V 50/60Hz coils 100-ETY30 Mechanical Interlocks · For interlocking of two contactors. · Common interlock for most Bul. 100-C contactor sizes · Interlocking of different sizes possible · Mechanical and electrical interlocking possible in one module by means of integrated auxiliary contacts · 9 mm dovetail connector included Mechanical Latch · Following contactor latching, the contactor coil is immediately de-energized (off) by the N.C. auxiliary contact (65-66). · Electrical or manual release · 1 N.O. + 1 N.C. auxiliary contacts · Suitable for all Bul. 100-C contactor sizes, 9...97 A (1) Cannot be used with side-mounted auxiliary contacts on 700-CF DC relays. Mechanical only, without auxiliary contacts Mechanical/ electrical interlock with 2 N.C. auxiliary contacts Maximum command duration 0.03...10 s 100-C (except 100C40, -C90) 100-MCA00 100-C (except 100C40, -C90) 100-MCA02 100-C with AC or 24V DC electronic coils (except 100-C90) 100-FL11 Coil Voltage Code: The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60 Hz: Cat. No. 100-FL11 becomes Cat. No.100-FL11D AC Voltages [V](1) 50 Hz 24 48 100 110 120 230...240 240 277 380...400 400...415 440 480 K Y KP D -- VA KA -- N G B -- 60 Hz J -- -- -- D -- KA T -- -- N B (1) For special voltages, consult your local Rockwell Automation sales office or Allen-Bradley distributor. 32 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Accessories Additional Control Modules Description Voltage Range DC Interface (Electronic) · Interface between the DC control signal (PLC) and the AC operating mechanism of the contactor. · Requires no additional surge suppression on the relay coils. Input: 12V DC Output: 110...240V AC Input: 18...30V DC Output: 110...240V AC Input: 48V DC Output: 110...240V AC Surge Suppressors · For limitation of coil switching transients. · Plug-in, coil mounted. · Suitable for 100-C contactor sizes, 9...97 A. · RC, varistor, and diode versions. RC Module AC operating mechanism Varistor Module AC/DC operating mechanism 24...48V AC, 50/60 Hz 110...280V AC, 50/60 Hz 380...480V AC, 50/60 Hz 12...55V AC, 12...77V DC 56...136V AC/78...180V DC 137...277V AC/ 181...350V DC 278...575V AC Diode Module DC operating mechanism 1...30 s 10...180 s Connection Diagrams (1) For screwless terminals, insert "CR" after the "100-" in the catalog number. Example: Cat No. 100-FSC48 becomes Cat. No.-CRFSC48. For Use With Cat. No. 100-JE12 100-C with AC coils 110...240V AC 100-JE 100-JE48 100-C with Coils 100-C with AC coils or 100-C09...-C43 with DC coils 100-FSC48(1) 100-FSC280(1) 100-FSC480(1) 100-FSV55(1) 100-FSV136(1) 100-FSV277(1) 100-FSV575(1) 100-C09...-C43 with DC coils 100-FSD250(1) Assembly Components (For 100-C09...C97 contactors) Description Dovetail Connectors · For use in contactor and starter assemblies · Single Connector -- 0 mm spacing Dovetail Connectors · For use in contactor and starter assemblies · Single Connector -- 9 mm spacing Protective Covers · Provides protection against unintended manual operation · For contactors and front-mounted auxiliary contacts, pneumatic timers, and latches For Use With 100-C 100-C all Pkg. Qty. 10 Cat. No. 100-S0 10 100-S9 1 100-SCCA 100-FA, -FB, -FC, -FP, -FL 10 100-SCFA Reversing Power Wiring Kits · For reversing connection with a solid-state or thermal overload relay DIN (#3) symmetrical hat rail · 35 x 7.5 x 1 m 100-C09...C23 100-C30...C37 100-C43...C55 100-C60...C97 140M-D 140M-F 100-C all 1 105-PW23 1 105-PW37 1 105-PW55 1 105-PW85 10 199-DR1 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 33 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Accessories Wye-Delta/Star-Delta Starter Kits Wye-Delta power wiring kits are designed to aid in the field assembly of open-transition Wye-delta starters that use Bulletin 100-C contactors. These kits include line, load, and start-point (shorting) connections. Assembling a Wye-delta starter requires the following additional components: · Contactors · Overload Relay · Cat. No. 100-MCA02 Mechanical/Electrical Interlock Cat. No. 100-ETY30 Electronic Y-Timer · Cat. No. 100-S9 Base Coupler for 1M to 2M contactor (optional) 3-Phase Rating kW (50 Hz) Hp (60 Hz) Use with Cat. No. 100- Pkg 230V 380/ 415V 500V 690V 200V 230V 460V 575V Delta 1M 2M Wye Qty. 1S 5.5 7.5 7.5 7.5 5 5 10 10 C09 C09 C09 1 7.5 11 11 10 5 7.5 15 15 C12 C12 C09 1 10 15 15 13 7.5 10 20 20 C16 C16 C12 1 13 22 22 18.5 7.5 10 25 25 C23 C23 C12 1 17 25 25 25 10 15 30 30 C30 C30 C16 1 20 37 32 32 15 20 40 40 C37 C37 C23 1 22 40 40 40 20 25 50 50 C43 C43 C30 1 30 45 45 45 25 30 60 60 C55 C55 C37 1 32 55 55 55 30 40 75 75 C60 C60 C37 1 40 63 63 63 40 50 100 100 C72 C72 C43 1 50 80 80 80 50 60 125 125 C85 C85 C60 1 50 90 90 90 50 60 125 125 C97 C97 C60 1 Cat. No. 170-PW23 170-PW23 170-PW23 170-PW23 170-PW37 170-PW37 170-PW55 170-PW55 170-PW72 170-PW72 170-PW85 170-PW85 Marking Systems (For 100-C09...C97 contactors) Description Label Sheet · 105 self-adhesive paper labels each, 6 x 17 mm Marking Tag Sheet · 106 perforated paper labels each, 6 x 17 mm, to be used with a transparent cover Transparent Cover · To be used with marking tag sheets Pkg. Qty.(1) 10 10 100 Cat. No. 100-FMS 100-FMP 100-FMC Marking Tag Adapters · To be used with 1492W marking tag system 100 100-FMA2 (1) Must be ordered in multiples of package quantities 34 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Accessories Terminal Kits (For 100C09...C97 contactors) Description Max. Current Ratings and Wire Sizes Stab Connector Kit · Dual stab (0.250 in.) for 100-C coil terminals · For 100-C09...C97 contactors Stab Connector Kit · Dual stab (0.250 in.) for 100-C power terminals · For 100-C09...C23 contactors 3-Pole Terminal Lug Kit · For Cat. No. 100-C09...C23 (Line side) IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) 3-Pole Terminal Lug Kit · For Cat. No. 100-C09...C23 (Load side) IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) 3-Pole Terminal Lug Kit IEC @ 40 °C · For Cat. No. 100-C30...C37 (Line and load IEC @ 40 °C side) UL/CSA (Encl.) 1-Pole Terminal Lug Kit · For Cat. No. 100-C43 IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) 1-Pole Terminal Lug Kit · For Cat. No. 100-C60...C97 IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) 3-Pole Paralleling Kit · For Cat. No. 100-C09...C23 IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) 3-Pole Paralleling Kit · For Cat. No. 100-C30...C37 IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.) (1) Must be ordered in multiples of the package quantity. (2) 16 mm2 max. according to IEC 60947; actual max. 25 mm2 45 A (4...16 mm2, fine stranded w/ ferrule)(2) 45 A (4...25 mm2, coarse stranded/solid) 40 A (#10...4 AWG, stranded/solid) 45 A (4...16 mm2, fine stranded w/ ferrule) 45 A (4...25 mm2, coarse stranded/solid) 40 A (#10...4 AWG, stranded/solid) 60 A (4...16 mm2, fine stranded w/ ferrule) 60 A (4...25 mm2, coarse stranded/solid) 55 A (#10...4 AWG, stranded/solid) 90 A (6...35 mm2, fine stranded w/ ferrule) 90 A (6...50 mm2, coarse stranded/solid) 75 A (#8...2 AWG, stranded/solid) 130 A (10...70 mm2, fine stranded w/ ferrule) 130 A (10...95 mm2, coarse stranded/solid) 130 A (#8...2/0 AWG, stranded/solid) 100 A (35...70 mm2, fine stranded w/ ferrule) 100 A (35...95 mm2, coarse stranded/solid) 100 A (#0...2/0 AWG, stranded/solid) 150 A (35...70 mm2, fine stranded w/ ferrule) 150 A (35...95 mm2, coarse stranded/solid) 150 A (#0...2/0 AWG, stranded/solid) Pkg. Qty(1) Cat. No. 20 199-SC2 100 199-SC10 1 100-CTN23 1 100-CTL23 1 100-CT37 3 100-CT43 3 100-CT85 2 100-CP23 2 100-CP37 SEMI-F47 Voltage Sag Immunity Module Description SEMI-F47 Module · Meets SEMI-F47 voltage sag immunity requirements · Direct mounting to coil terminals of 100-C contactors and 700-CF control relays · Requires DC coil contactor · Optional 1...30 s ON-delay timer version Input Voltage For Use With(1) 24...240V AC 100-C60...C97 110...240V AC 100-C60...C97 Options without timer Cat. No. 100-CSF47 with 1...30 s ON-delay timer 100-CSF47A30 (1) Contactor must have DC coil at the same voltage as AC input. Example: for 24V AC control, select Cat. No. 100-C09ZJ10 (24V DC coil). Rockwell Automation Publication 100-TD013J-EN-P - April 2021 35 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Renewal Parts Renewal Parts Replacement Coils for AC Contactors AC Standard Control Voltages [V] 50 Hz -- 12 -- 24 -- 32 36 42 48 -- 100 110 -- 120 127 200 -- 200...220 -- 220 220...230 -- 230...240 240 -- -- -- 380...400 -- 400...415 440 -- 500 550 60 Hz 12 -- 24 -- -- 36 42 48 -- -- 100...110 120 -- -- -- 200...220 208 208...240 -- 240 260 -- -- 277 -- 347 380 440 -- -- 480 -- -- 600 50/60 Hz -- -- -- -- 24 -- -- -- -- 48 100 -- 110 -- -- 200 -- -- 200...230 -- -- 230 -- -- 240 -- -- -- 400 -- -- 440 -- -- AC Coil Code Q R J K KJ V W X Y KY KP D KD P S KG H L KL A F KF VA T KA I E N KN G B KB M C 100-C09...100-C16 Cat. No. TA006 TA404 TA013 TA407 TA855 TA481 TA410 TA482 TA414 TA860 TA861 TA473 TA856 TA425 TA428 TA862 TA049 TA296 TA864 TA474 TA441 TA851 TA440 TA480 TA858 TA065 TA067 TA071 TA863 TA457 TA475 TA859 TA479 TA476 100-C23...100-C37, 100L-C20 Cat. No. TC006 TC404 TC013 TC407 TC855 TC481 TC410 TC482 TC414 TC860 TC861 TC473 TC856 TC425 TC428 TC862 TC049 TC296 TC864 TC474 TC441 TC851 TC440 TC480 TC858 TC065 TC067 TC071 TC863 TC457 TC475 TC859 TC479 TC476 100-C40...100-C55 Cat. No. TD006 TD404 TD013 TD407 TD855 TD481 TD410 TD482 TD414 TD860 TD861 TD473 TD856 TD425 TD428 TD862 TD049 TD296 TD864 TD474 TD441 TD851 TD440 TD480 TD858 TD065 TD067 TD071 TD863 TD457 TD475 TD859 TD479 TD476 100-C60...100-C85 Cat. No. TE006 TE404 TE013 TE407 TE855 TE481 TE410 TE482 TE414 TE860 TE861 TE473 TE856 TE425 TE428 TE862 TE049 TE296 TE864 TE474 TE441 TE851 TE440 TE480 TE858 TE065 TE067 TE071 TE863 TE457 TE475 TE859 TE479 TE476 100-C90...100-C97 Cat. No. TF006 TF404 TF013 TF407 TF855 TF481 TF410 TF482 TF414 TF860 TF861 TF473 TF856 TF425 TF428 TF862 TF049 TF296 -- TF474 TF441 TF851 TF440 TF480 TF858 TF065 TF067 TF071 TF863 TF457 TF475 TF859 TF479 TF476 36 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Replacement Coils for DC Contactors 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Renewal Parts DC Control Voltage [V] 9V Diode(1) 12V Electronic(2) 12V Diode 24V Electronic(2) 24V Electronic (3) 24V Diode(2) DC Coil Code DR EQ DQ EJ QJ DJ 100-C09...100-C16, 100Q-C16 Cat. No. -- TC708E -- TC714E TC714Q -- 36...48V Electronic(2) EW 36V Diode DW 48...72V Electronic EY 48V Diode DY 60V Diode DZ 64V Diode DB 72V Diode DG 80V Diode DE 110...125V Electronic (4) ED TC719E -- TC724E -- -- -- -- -- TC733E 110V Diode DD 115V Diode DP 125V Diode DS 220...250V Electronic EA 220V Diode DA 230V Diode DF 250V Diode DT -- -- -- TC747E -- -- -- (1) Voltage operating range: 0.65...1.3 Us (2) Voltage operating range: 0.7...1.25 Us (3) Faster drop-out time (16...21 ms) (4) Voltage operating range: 0.7...1.25 Us at 110V DC 100-C23...100-C37, 100Q-C37 Cat. No. -- TC708E -- TC714E TC714Q -- TC719E -- TC724E -- -- -- -- -- TC733E -- -- -- TC747E -- -- -- 100-C40...100-C55 (Series A) Cat. No. -- TD708E -- TD714E TD714Q -- TD719E -- TD724E -- -- -- -- -- TD733E -- -- -- TD747E -- -- -- 100-C40...100-C55 (Series B) Cat. No. -- TD708E2 -- TD714E2 TD714Q2 -- TD719E2 -- TD724E2 -- -- -- -- -- TD733E2 -- -- -- TD747E2 -- -- -- 100-C60...100-C85 Cat. No. TE766M -- TE708M -- -- TE714M -- TE719M -- TE724M TE774M TE727M TE728M TE729M -- TE733M TE734M TE737M -- TE747M TE749F TE751F 100-C90...100-C97 Cat. No. TF766M -- TF708M -- -- TF714M -- TF719M -- TF724M TF774M TF727M TF728M TF729M -- TF733M TF734M TF737M -- TF747M TF749F TF751F Rockwell Automation Publication 100-TD013J-EN-P - April 2021 37 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Specifications Table 10 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 72 85 90*200 90*400 97 Coil Type: Conventional X X X X X X X Electronic -- EI X X X X X X X X XXXXX X X X X------ -- XX ---- AC-1 Active Power Load (50 Hz); Ambient temperature 40 °C (104 °F) Rated Operational 500V [A] 32 32 32 32(40)(1) 65 65 75 Current, Ie 690V [A] 32 32 32 32(40)(1) 65 65 75 230V [kW] 13 13 13 13 26 26 30 240V [kW] 13 13 13 13 27 27 31 Rated Operational 400V [kW] 22 22 22 22 45 45 52 Power, Pe 415V [kW] 23 23 23 23 47 47 54 500V [kW] 28 28 28 28 56 56 65 75 85 85 100 100 100 130 130 130 75 85 85 100 100 100 130 130 130 30 34 34 40 40 40 52 52 52 31 35 35 42 42 42 54 54 54 52 59 59 69 69 69 90 90 90 54 61 61 72 72 72 93 93 93 65 74 74 87 87 87 113 113 113 690V [kW] 38 38 38 38 78 78 90 90 102 102 120 120 120 155 155 155 AC-1 Active Power Load (50 Hz); Ambient temperature 60 °C (140 °F) Rated Operational Current, Ie 500V 690V [A] 32 32 32 [A] 32 32 32 32 65 65 60 32 65 65 60 230V [kW] 13 13 13 13 26 26 24 240V [kW] 13 13 13 13 27 27 25 Rated Operational 400V [kW] 22 22 22 22 45 45 42 Power, Pe 415V [kW] 23 23 23 23 47 47 43 500V [kW] 28 28 28 28 56 56 52 60 75 75 100 100 100 110 60 75 75 100 100 100 110 24 25 25 40 40 40 44 25 26 26 42 42 42 46 42 44 44 69 69 69 76 43 45 45 72 72 72 79 52 55 55 87 87 87 95 110 110 110 110 44 44 46 46 76 76 79 79 95 95 690V [kW] 38 38 38 38 78 78 72 72 75 75 120 120 120 131 131 131 Switching of 3-phase Motors; (50 Hz) Ambient temperature 60 °C (140 °F), AC-2, AC-3 230V [A] 12 15 20 26.5 35 38 38 240V [A] 12 15 20 26.5 35 38 38 Rated Operational 400V Current, Ie 415V [A] 9 12 16 23 30 37 37 [A] 9 12 16 23 30 37 37 500V [A] 7 10 14 20 25 30 29 690V [A] 5 7 9 12 18 21 9 230V [kW] 3 4 5.5 7.5 10 11 11 38 44 56 62 72 85 85 38 44 56 62 72 85 85 37 43 55 60 72 85 85 37 43 55 60 72 85 85 30 38 44 55 67 80 80 21 25 25 34 42 49 22 11 13 15 18.5 22 25 25 85 96 85 95 85 97 85 97 80 78 49 57 25 30 240V [kW] 3 4 5.5 7.5 10 11 11 11 13 15 18.5 22 25 25 25 30 Rated Operational 400V [kW] 4 5.5 7.5 11 Power, Pe 415V [kW] 4 5.5 7.5 11 15 18.5 18.5 18.5 22 30 32 40 45 45 15 20 20 20 22 30 32 40 45 45 45 55 45 55 500V [kW] 4 5.5 7.5 13 15 20 18.5 20 25 30 37 45 55 55 55 55 690V [kW] 4 5.5 7.5 10 15 18.5 7.5 18.5 22 22 32 40 45 18.5 45 55 Load Carrying Capacity per UL/CSA General Purpose Current (enclosed) [A] 25 25 30 30 55 60 60 60 75 75 90 90 100 125 130 120 Rated current 115V (enclosed), 1-phase 230V [A] 9.8 9.8 16 24 24 34 34 [A] 10 12 17 17 28 28 28 34 34 56 56 56 80 80 28 40 50 50 68 68 68 80 100 68 88 Rated power 115V (enclosed), 1-phase 230V 200V Rated current 230V (enclosed), 3-phase 460V 575V 200V Rated power 230V (enclosed), 3-phase 460V 575V [Hp] 0.5 0.5 1 2 2 3 3 3 3 5 5 5 7.5 7.5 7.5 10 [Hp] 1.5 2 3 3 5 5 5 5 7.5 10 10 15 15 15 15 20 [A] 7.8 11 17.5 17.5 25.3 32.2 32.2 32.2 32.2 48.3 48.3 62.1 78.2 78.2 78.2 92 [A] 6.8 9.6 15.2 22 28 28 28 28 42 54 54 68 80 80 80 80 [A] 7.6 11 14 21 27 34 34 34 40 52 52 65 77 65 77 96 [A] 9 11 17 17 27 32 17 32 32 41 52 62 62 22 52 77 [Hp] 2 3 5 5 7.5 10 10 10 10 15 15 20 25 25 25 30 [Hp] 2 3 5 7.5 10 10 10 10 15 20 20 25 30 30 30 30 [Hp] 5 7.5 10 15 20 25 25 25 30 40 40 50 60 50 60 75 [Hp] 7.5 10 15 15 25 30 15 30 30 40 50 60 60 20 50 75 (1) Values in () with increased cross-section and cable lug. 38 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 11 - Main Circuits Coil Type: Conventional Electronic -- EI 100/104-C, 100S/104S-C 09 12 16 23 30 37 43 55 60 72 85 97 X X X X X X X X X X X X X X X X X X X X -- -- -- -- Switching of 3-phase Motors, (50 Hz); Ambient temperature 60 °C (140 °F), AC-4 230V [A] 12 15 20 26.5 35 38 44 56 62 72 85 96 Rated Operational Current, Ie 240V [A] 12 15 20 26.5 35 38 44 56 62 72 85 95 400V [A] 9 12 16 23 30 37 43 55 60 72 85 97 415V [A] 9 12 16 23 30 37 43 55 60 72 85 97 500V [A] 7 10 14 20 25 30 38 44 55 67 80 78 690V [A] 5 7 9 12 18 21 25 25 34 42 49 57 230V [kW] 3 4 5.5 7.5 10 11 13 15 18.5 22 25 30 240V [kW] 3 4 5.5 7.5 10 11 13 15 18.5 22 25 30 Rated Operational Power, 400V Pe 415V [kW] 4 5.5 7.5 11 [kW] 4 5.5 7.5 11 15 18.5 22 15 20 22 30 32 40 45 55 30 32 40 45 55 500V [kW] 4 5.5 7.5 13 15 20 25 30 37 45 55 55 690V [kW] 4 5.5 7.5 10 15 18.5 22 22 32 40 45 55 AC-4 at approximately 200,000 operations 230V [A] 4.3 6.6 9 9 12 14 16.5 22 25.5 31 38 44 240V [A] 4.3 6.6 9 9 12 14 16.5 22 25.5 31 38 44 Rated Operational Current, Ie 400/415V [A] 4.3 6.6 9 9 12 14 16.5 22 25.5 31 38 44 500V [A] 4.3 6.6 9 9 12 14 16.5 22 25.5 31 38 44 690V [A] 4.3 6.6 9 9 12 14 16.5 22 25.5 31 38 44 230V (1) [kW] 0.75 1.5 2.2 2.2 3 3.7 4 5.5 6.3 7.5 11 11 240V (1) [kW] 0.75 1.5 2.2 2.2 3 4 4 5.5 7.5 7.5 11 11 Rated Operational Power, 400V (1) [kW] 1.8 3 4 4 5.5 6.3 7.5 11 13 15 20 22 Pe 415V (1) [kW] 1.8 3 4 4 5.5 6.3 7.5 11 13 17 20 22 500V (1) [kW] 2.2 3.7 5.5 5.5 7.5 7.5 10 11 15 20 25 30 690V (1) [kW] 3 5.5 7.5 7.5 10 11 15 18.5 22 25 32 37 Max. switching frequency Ops/hour 250 250 220 200 200 200 200 200 120 120 120 120 200V [Hp] 5 5 7-1/2 7-1/2 10 15 20 25 30 40 50 50 Wye-Delta (60 Hz) 230V Rated Operational Power 460V 575V 200V UL/CSA Elevator Duty 230V Rated Operational Current 460V 575V 200V UL/CSA Elevator Duty 230V Rated Operational Power 460V [Hp] 5 7-1/2 10 10 15 20 25 [Hp] 10 15 20 25 30 40 50 [Hp] 10 15 20 25 30 40 50 [A] 7.8 11.0 11.0 17.5 25.3 25.3 32.2 [A] 6.8 9.6 15.2 15.2 22.0 28.0 28.0 [A] 7.6 11.0 14.0 21.0 27.0 27.0 34.0 [A] 6.1 9.0 11.0 17.0 22.0 27.0 32.0 [Hp] 2 3 3 5 7-1/2 7-1/2 10 [Hp] 2 3 5 5 7-1/2 10 10 [Hp] 5 7-1/2 10 15 20 20 25 30 40 50 60 60 60 75 100 125 125 60 75 100 125 125 TBD 32.2 48.3 62.1 TBD TBD 42.0 54.0 68.0 TBD TBD 40.0 52.0 65.0 TBD TBD 41.0 52.0 62.0 TBD TBD 10 15 20 TBD TBD 15 20 25 TBD TBD 30 40 50 TBD 575V [Hp] 5 7-1/2 10 15 20 25 30 TBD 40 50 60 TBD (1) Power ratings at 50 Hz: Preferred values according to IEC 60072-1 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 39 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 12 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 43 55 60 72 85 97 Coil Type: Conventional X X X X X X X X X X X X Electronic -- EI X X X X X X X X -- -- -- -- Star-Delta Starting (50 Hz) 230V [A] 21 26 35 46 61 66 76 96 107 125 147 166 240V [A] 21 26 35 46 61 66 76 96 107 125 47 165 Rated Operational Current, Ie 400V [A] 16 21 28 40 52 64 74 95.3 104 125 147 168 415V [A] 16 21 28 40 52 64 74 95.3 104 125 47 168 500V [A] 12 17 24 35 43 52 66 76.2 95 116 139 135 690V [A] 8.6 12 16 21 31 36 43 55.4 59 73 85 99 230V (1) [kW] 5.5 7.5 10 13 17 20 22 30 32 37 45 50 240V (1) [kW] 5.5 7.5 10 13 18.5 20 22 30 32 40 50 50 Rated Operational Power, 400V (1) [kW] 7.5 10 13 20 25 32 40 45 55 63 80 90 Pe 415V (1) [kW] 7.5 11 15 22 25 32 40 45 55 63 80 90 500V (1) [kW] 7.5 11 15 22 25 32 45 45 63 80 90 90 690V (1) [kW] 7.5 10 13 18.5 25 32 40 45 55 63 80 90 Switching of Power Transformers, AC-6a (50 Hz)) Inrush Current = n Rated transformer current 230V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 240V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 400V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 n= 30 415V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 500V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 690V [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 230V [kVA] 4.3 4.3 4.3 4.3 8 8 9.2 9.2 16 16 16 19.3 240V [kVA] 4.5 4.5 4.5 4.5 8.3 8.3 10 10 17 17 17 20.2 Apparent Power 400V [kVA] 7.5 7.5 7.5 7.5 14 14 16 16 28 28 28 33.6 415V [kVA] 7.8 7.8 7.8 7.8 14 14 17 17 29 29 29 34.9 500V [kVA] 9.4 9.4 9.4 9.4 17 17 20 20 35 35 35 42 690V [kVA] 13 13 13 13 24 24 27 27 49 49 49 58 n=20 690V [A] 16.3 16.3 16.3 16.3 30 30 34.5 34.5 61.3 61.3 61.3 72.8 n=15 690V [A] 22 22 22 22 40 40 46 46 82 82 82 97 60 Hz Peak Inrush/peak rated transformer current n=30 [A] 10.9 10.9 10.9 10.9 20 20 23 23 40.8 40.8 40.8 48.5 200V [kVA] 3.8 3.8 3.8 3.8 6.9 6.9 8.0 8 14.1 14.4 14.4 16.8 208V [kVA] 3.9 3.9 3.9 3.9 7.2 7.2 8.3 8.3 14.7 14.7 14.7 17.5 Apparent Power 240V [kVA] 4.5 4.5 4.5 4.5 8.3 8.3 9.6 9.6 17.0 17.0 17.0 20.2 480V [kVA] 9.1 9.1 9.1 9.1 16.6 16.6 19.1 19.1 33.9 33.9 33.9 40.3 600V [kVA] 11.3 11.3 11.3 11.3 20.8 20.8 23.9 23.9 42.4 42.4 42.4 50.4 660V [kVA] 12.5 12.5 12.5 12.5 22.9 22.9 26.3 26.3 46.6 46.6 46.6 55.4 60 Hz Peak Inrush/peak rated transformer current n=20 [A] 16.3 16.3 16.3 16.3 30 30 34.5 34.5 61.3 61.3 61.3 72.8 200V [kVA] 5.6 5.6 5.6 5.6 10.4 10.4 12.0 12 21.2 21.2 21.2 25.2 208V [kVA] 5.9 5.9 5.9 5.9 10.8 10.8 12.4 12.4 22.1 22.1 22.1 26.2 Apparent Power 240V [kVA] 6.8 6.8 6.8 6.8 12.5 12.5 14.3 14.3 25.5 25.5 25.5 30.3 480V [kVA] 13.6 13.6 13.6 13.6 24.9 24.9 28.7 28.7 51.0 51.0 51.0 60.5 600V [kVA] 16.9 16.9 16.9 16.9 31.2 31.2 35.9 35.9 63.7 63.7 63.7 75.7 660V [kVA] 18.6 18.6 18.6 18.6 34.3 34.3 39.4 39.4 70.1 70.1 70.1 83.2 (1) Power ratings at 50 Hz: Preferred values according to IEC 60072-1 40 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 13 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 43 55 Coil Type: Conventional X X X X X X X X Electronic -- EI X X X X X X X X 60 Hz Peak Inrush/peak rated transformer current n=15 [A] 22 22 22 22 40 40 46 46 200V [kVA] 7.5 7.5 7.5 7.5 13.9 13.9 15.9 15.9 208V [kVA] 7.8 7.8 7.8 7.8 14.4 14.4 16.6 16.6 Apparent Power 240V [kVA] 9.0 9.0 9.0 9.0 16.6 16.6 19.1 19.1 480V [kVA] 18.1 18.1 18.1 18.1 33.3 33.3 38.2 38.2 600V [kVA] 22.6 22.6 22.6 22.6 41.6 41.6 47.8 47.8 660V [kVA] 24.9 24.9 24.9 24.9 45.7 45.7 52.6 52.6 Table 14 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 Coil Type: Conventional XXXXXX X Electronic -- EI X X X X X X X X XXX X XX-- Switching of 3-phase Capacitors, AC-6b (50 Hz)(1) 230V [kVAR] 8 8 8.5 9 14 14 -- -- 24 24 28 240V [kVAR] 8 8 8.5 9 14 14 -- -- 25 25 29 Single capacitor 40 °C (104 °F) 400V [kVAR] 8 8 10 12.5 20 24 -- 415V [kVAR] 8 8 10 12.5 20 25 -- -- 35 35 48 -- 35 35 50 500V [kVAR] 8 8 10 12.5 20 25 -- -- 35 35 50 690V [kVAR] 8 8 10 12.5 20 25 -- -- 35 35 50 230V [kVAR] 8 8 8.5 9 12.5 12.5 -- -- 18 18 28 240V [kVAR] 8 8 8.5 9 12.5 12.5 -- -- 18 18 29 Single capacitor 60 °C (140 °F) 400V [kVAR] 8 8 10 12.5 20 21.5 -- 415V [kVAR] 8 8 10 12.5 20 22 -- -- 30 30 42 -- 30 30 42 500V [kVAR] 8 8 10 12.5 20 25 -- -- 30 30 42 690V [kVAR] 8 8 10 12.5 20 25 -- -- 30 30 42 230V [kVAR] 5 5 8 9 12.5 14 -- -- 20 20 28 240V [kVAR] 5 5 8 9 12.5 14 -- -- 20 20 29 Group capacitors 40 °C (104 °F) 400V [kVAR] 5 5 8 10 15 20 -- 415V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 -- 25 25 40 500V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 690V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 230V [kVAR] 5 5 8 9 12.5 12.5 -- -- 18 18 28 240V [kVAR] 5 5 8 9 12.5 12.5 -- -- 18 18 29 Group capacitors 60 °C (140 °F) 400V [kVAR] 5 5 8 10 15 20 -- 415V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 -- 25 25 40 500V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 690V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 200V [kVAR] 5 5 8 9 12.5 14 -- -- 20 20 28 60 Hz Single Capacitor 230V [kVAR] 5 5 8 9 12.5 14 -- -- 40 °C (104 °F) 460V [kVAR] 5 5 8 10 15 20 -- -- 20 20 29 -- 25 25 40 600V [kVAR] 5 5 8 10 15 20 -- -- 25 25 40 60 Hz Group Capacitors -- 40 °C (104 °F) 200V [kVAR] 5 5 8 9 12.5 12.5 -- 230V [kVAR] 5 5 8 9 12.5 12.5 -- 460V [kVAR] 5 5 8 10 15 20 -- 600V [kVAR] 5 5 8 10 15 20 -- -- 18 18 28 -- 18 18 29 -- 25 25 40 -- 25 25 40 (1) Inductance of leads between capacitors in parallel: min. 6 µH (100-C09...C30 contactors: min 30 µH) 60 72 85 97 X X X X -- -- -- -- 82 82 82 97 28.4 28.4 28.4 33.6 29.5 29.5 29.5 34.9 34.1 34.1 34.1 40.3 68.2 68.2 68.2 80.6 85.2 85.2 85.2 100.8 93.7 93.7 93.7 110.9 72 85 90*200 90*400 97 XX X XX ---- -- ---- 28 28 -- 29 29 -- 48 48 -- 50 50 -- 55 60 -- 55 60 -- 28 28 -- 29 29 -- 48 48 -- 50 50 -- 50 55 -- 50 55 -- 28 28 -- 29 29 -- 48 48 -- 50 50 -- 50 50 -- 50 50 -- 28 28 -- 29 29 -- 48 48 -- 50 50 -- 50 50 -- 50 50 -- 28 28 -- 29 29 -- 50 50 -- 50 50 -- 28 28 -- 29 29 -- 50 50 -- 50 50 -- -- 28 -- 29 -- 48 -- 50 -- 60 -- 60 -- 28 -- 29 -- 48 -- 50 -- 55 -- 55 -- 28 -- 29 -- 48 -- 50 -- 50 -- 50 -- 28 -- 29 -- 48 -- 50 -- 50 -- 50 -- 28 -- 29 -- 50 -- 50 -- 28 -- 29 -- 50 -- 50 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 41 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 15 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 72 85 90*200 90*400 97 Coil Type: Conventional XXXXXX X Electronic -- EI X X X X X X X X XXXXX X X X X------ -- XX ---- Switching of Lamps Gas discharge lamps AC-5a, 40 °C (104 °F) open [A] 22.5 25 28 29 40.5 45 65 65 77 77 81 85 90 115 115 115 enclosed [A] 22.5 25 28 29 37 41 54 54 57 57 77 81 90 95 95 100 Individually compensated: Max. capacitance at expected Short-circuit current of 10 kA [µF] 1000 1000 1000 1000 2700 2700 -- 20 kA [µF] 500 500 500 500 1350 1350 -- 50 kA [µF] 200 200 200 200 540 540 -- -- 3200 3200 4000 4000 4700 -- -- 1600 1600 2000 2000 2350 -- -- 640 640 800 800 940 -- -- 4700 -- 2350 -- 940 Filament AC-5b 230/240V [A] 12 16 18 22 30 37 18 25 43 51 60 70 76 60 75 90 Switching of Low Inductive Loads in Home Appliances and Similar Applications per IEC 61095 (50 Hz) 230V [A] 32 32 32 32 45 45 -- -- 63 63 -- -- -- -- ---- AC-7a 400V [A] 32 32 32 32 45 45 -- -- 63 63 -- -- -- -- ---- 440V [A] 32 32 32 32 45 45 -- -- 63 63 -- -- -- -- ---- Switching of Motor Load for Home Appliances (50 Hz) 230V [A] 10.5 14 19 23 30 -- -- -- ---------- -- ---- AC-7b 400V [A] 9 12 16 20 30 -- -- -- ---------- -- ---- 440V [A] 7.5 10 13.5 18 27 -- -- -- ---------- -- ---- Switching of Hermetically Sealed Cooling Compressor Motors - manual reset of overload release (50 Hz) 400V [A] 12 16 22 32 38 45 -- -- 63 63 72 85 100 -- -- 115 AC-8a 500V [A] 12 16 22 32 38 45 -- -- 63 63 72 85 100 -- -- 115 690V [A] 8 10 14 20 28 35 -- -- 42 42 56 67 80 -- -- 90 - automatic reset of overload release 400V [A] 5.5 7 9.3 12 13 14 -- -- 16 16 24 30 35 -- -- 35 AC-8b 500V [A] 5.5 7 9.3 12 13 14 -- -- 16 16 24 30 35 -- -- 35 690V [A] 5.5 7 9.3 12 13 14 -- -- 16 16 24 30 35 -- -- 35 Switching of DC Loads Non-inductive or slightly inductive loads or resistance furnaces DC-1, 60 °C (140 °F) 24V [A] 25 25 32 32 45 45 45 45 50 50 70 80 80 80 80 80 48/60V [A] 20 20 20 20 25 25 25 25 30 30 40 40 40 40 40 40 1 pole 110V [A] 6 6 6 6 8 8 10 10 9 9 11 11 11 11 11 11 220V [A] 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 1.8 1.8 2 440V [A] 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 24V [A] 25 25 32 32 45 45 45 45 50 50 70 80 80 80 80 80 48/60V [A] 25 25 32 32 45 45 45 45 50 50 70 80 80 80 80 80 2 poles in series 110V [A] 25 25 32 32 45 45 45 45 50 50 70 80 80 80 80 80 220V [A] 8 8 8 10 10 10 10 10 10 10 15 15 15 15 15 15 440V [A] 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 24V [A] 25 25 32 32 45 45 -- 45 63 63 90 90 100 -- 100 100 48/60V [A] 25 25 32 32 45 45 -- 45 63 63 90 90 100 -- 100 100 3 poles in series 110V [A] 25 25 32 32 45 45 -- 45 63 63 90 90 100 -- 100 100 220V [A] 25 25 32 32 45 45 -- 45 50 50 70 80 80 -- 80 80 440V [A] 3 3 3 3 3.5 3.5 -- 3.5 4 4 5 5 5 -- 55 42 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 16 - Main Circuits 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 72 85 90*200 90*400 97 Coil Type: Conventional X X X X X X X Electronic -- EI X X X X X X X X XXXXX X X X X------ -- XX ---- Switching of DC Loads, Continued Shunt-wound Motors, Starting, reverse current braking, reversing, stepping DC-3, 60 °C (140 °F) 24V [A] 25 25 32 32 45 45 -- -- 63 63 90 90 100 -- -- 100 48/60V [A] 25 25 32 32 45 45 -- -- 50 50 70 70 80 -- -- 80 3 poles in series 110V [A] 20 20 25 25 30 30 -- -- 35 35 70 70 80 -- -- 80 220V [A] 6 6 6 10 15 15 -- -- 20 20 25 25 30 -- -- 30 440V [A] 0.6 0.6 0.6 0.6 0.6 0.6 -- -- 0.6 0.6 0.6 0.6 0.6 -- -- 0.6 Series-wound Motors, Starting, reverse current braking, reversing, stepping DC-5, 60 °C (140 °F) 24V [A] 25 25 32 32 45 45 -- -- 63 63 90 90 100 -- -- 100 48/60V [A] 25 25 32 32 45 45 -- -- 50 50 70 70 80 -- -- 80 3 poles in series 110V [A] 20 20 25 25 30 30 -- -- 35 35 70 70 80 -- -- 80 220V [A] 6 6 6 10 15 15 -- -- 20 20 25 25 30 -- -- 30 440V [A] 0.6 0.6 0.6 0.6 0.6 0.6 -- -- 0.6 0.6 0.6 0.6 0.6 -- -- 0.6 Short Time Withstand ICW, 10 s [A] 170 170 170 215 300 304 304 304 375 375 700 700 700 700 700 840 60 °C (140 °F) Resistance and Power Dissipation Main current circuit resistance [m] 2.7 2.7 2.7 2 2 2 2 1.5 1.5 1 0.9 0.9 0.9 0.8 0.7 0.6 Power dissipation by all circuits at Ie AC-3/400V [W] 0.66 1.2 2.1 3.2 5.4 8.2 11.3 8.4 8.3 9.1 9.7 14 19.5 11.6 20.2 17 AC control [W] 3.4 3.9 4.8 6.3 8.5 11.3 8.8 9.5 11.6 12.4 14.2 18.5 24 20.6 29.2 26 Total power dissipation At Ie AC-3/400V DC control (conv.) [W] -- -- -- -- -- -- -- DC control [W] 2.4 2.9 3.8 4.9 7.1 9.9 8 (elect.) -- -- -- 13.7 18 23.5 16.6 25.2 22 8.7 10.8 11.6 -- -- -- -- ---- Lifespan Mechanical AC control [Million ops.] 13 13 13 13 13 13 10 10 12 12 6 6 6 6 6 6 Mechanical DC control [Million ops.] 13 13 13 13 13 13 10 10 13 13 6 6 6 6 6 6 Electrical AC-3 (400 V) [Million ops.] 1.3 1.3 1.3 1.3 1.3 1.3 -- -- 1 0.8 1 1 1 -- -- 1 Weight NonRev. [kg 0.39 0.39 0.39 0.39 0.48 0.49 0.63 (lbs)] (0.86) (0.86) (0.86) (0.86) (1.06) (1.08) (1.39) 0.63 0.51 0.51 1.45 1.45 1.45 (1.39) (1.12) (1.12) (3.20) (3.20) (3.20) -- -- 1.45 (3.20) AC Rev. [kg 0.85 0.85 0.85 0.85 1.08 1.08 (lbs)] (1.89) (1.89) (1.89) (1.89) (2.39) (2.39) -- -- 1.15 1.15 3.14 3.14 3.14 (2.54) (2.54) (6.92) (6.92) (6.92) -- -- 3.14 (6.92) NonRev. [kg 0.6 (lbs)] (1.32) -- -- -- -- -- -- -- -- -- 1.47 1.47 1.47 (3.24) (3.24) (3.24) -- -- 1.47 (3.24) DC Rev. [kg 1.27 (lbs)] (2.81) -- -- -- -- -- -- -- -- -- 3.22 3.22 3.22 (7.1) (7.1) (7.1) -- -- 3.22 (7.1) Non- [kg DC (Electronic-EQ, Rev. (lbs)] -- 0.40 0.40 0.40 0.40 0.49 (0.88) (0.88) (0.88) (0.88) (1.08) 0.49 (1.08) 0.57 0.57 0.57 0.57 (1.25) (1.25) (1.25) (1.25) -- -- -- EJ) Rev. [kg (lbs)] -- 0.87 0.87 0.87 0.87 1.08 1.08 (1.91) (1.91) (1.91) (1.91) (2.39) (2.39) -- -- 1.27 1.27 (2.79) (2.79) -- -- -- ---- ---- Non- [kg DC (Electronic- EW, Rev. (lbs)] -- 0.43 0.43 0.43 0.43 0.52 (0.95) (0.95) (0.95) (0.95) (1.14) 0.52 (1.14) 0.60 0.60 0.60 0.60 (1.32) (1.32) (1.32) (1.32) -- -- -- EY, ED, EA) Rev. [kg (lbs)] -- 0.93 0.93 0.93 0.93 1.14 1.14 (2.05) (2.05) (2.05) (2.05) (2.51) (2.51) -- -- 1.33 1.33 (2.93) (2.93) -- -- -- ---- ---- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 43 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 17 - Conductors 100/104-C, 100S/104S-C 09 12 16 23 30 37 40 43 55 60 72 85 90 97 Coil Type: Conventional Electronic -- EI XXXXXXXXXXXXX X X X X X X X X X X-------- -- (1) (2) (3) Conductor Cross Sections - Main Contacts Terminal type Recommended torque Cross section per UL/CSA Recommended torque 1 conductor 2 conductors 1 conductor 2 conductors [mm2] [mm2] [mm2] [mm2] [N·m] [AWG] [lb·in] Conductor Cross Sections - Coil Terminal type 1...4 1...4 1.5...6 1.5...6 1.5...2.0 16...10 13.3...17.7 2.5...10 2.5...10 2.5...16 2.5...16 2.5...3.5 14...4 22...31 2.5...16 2.5...10 2.5...25 2.5...16 2.5...3.5 14...6 14...4 22...31 (1) 2.5...35 2.5...25 2.5...50 2.5...35 4.5...6 14...1 40...53 1 conductor 2 conductors 1 conductor 2 conductors Recommended torque Cross section per UL/CSA Recommended torque (1) Pozidriv No. 2 / Blade No. 3 screw (2) Pozidriv No. 2 / Blade No. 4 screw (3) Hexagonal socket screw [mm2] [mm2] [mm2] [mm2] [N·m] [AWG] [lb·in] 1...2.5 1...2.5 1...4 1...4 1...1.5 16...12 9...13 44 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 18 - Short-Circuit Coordination Data(1) 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 72 85 90*200 90*400 97 Coil Type: Conventional Electronic - EI XXXXXX X XXXXXX X X XXXX X X XX X XX------ -- -- -- Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) Per IEC 60947-4-1 (contactor and fuses only) 50 kA Available Fault Current Type"1"(690V) DIN Fuses- gG, gL Type"2"(400V) [A] 50 50 50 80 125 125 160 [A] 25 35 35 40 80 80 63 160 160 160 250 250 250 250 250 250 80 100 100 160 160 160 160 100 200 Type"2"(690V) [A] 25 35 35 40 80 80 63 80 100 100 160 160 160 160 100 200 65kA Available Fault Current BS88Fuses Type"1"(415V) [A] 25 32 40 50 63 80 -- -- 80 TBD 100 160 160 -- -- TBD Type"2"(415V) [A] 20 25 32 50 63 80 Per UL 508 and CSA 22.2 No. 14 (contactor and fuses or circuit breaker only) UL Class K5 and UL Listed [A] 35 40 70 90 110 125 RK5 Fuses Combination (600V) UL verified UL Class CC and CSA combination to HRCI-MISC Fuses IEC60947-4-1 "Type2" [A] -- -- -- -- -- -- [A] 20(2) 20 30 40 -- -- -- -- 80 TBD 100 125 160 -- 5 kA Available Fault Current 125 125 150 200 200 -- -- -- 10 kA Available Fault Current -- -- -- -- -- 250 300 300 100 kA Available Fault Current -- -- -------- -- -- -- TBD ---- 300 350 ---- UL Class J and CSA HRCI-J Fuses UL verified combination to IEC60947-4-1 "Type 2" 100 kA Available Fault Current [A] 20(2) 20 30 40 50 50 -- -- 70 80 80 100 150 -- -- 175 UL Inverse-time Circuit Breaker UL Listed 5 kA Available Fault Current Combination (480V) [A] 30 30 50 50 125 125 -- -- 125 150 250 -- -- -- [A] -- -- -- -- 125 125 -- -- 125 150 250 -- -- -- UL Listed Combination (600V) [A] -- -- -- -- -- -- 10 kA Available Fault Current -- -- -- -- -- 250 250 -- 18 kA Available Fault Current [A] -- -- -- -- -- -- -- -- -------- -- -- UL Listed Combination (600Y/347V) 25 kA Available Fault Current [A] 30(3) 30(3) 30(3) 30(3) 50(4) 50(4) -- -- 50(4) -- 110 110 110 -- UL Listed Combination (600V) [A] -- -- -- -- 100(5) 100(5) -- -- 100(5) 125 200(5) 225(5) 225(5) -- ---- ---- -- 250 ---- ---- -- 225(5) UL Listed 50 kA Available Fault Current Combination (480V) [A] -- -- -- -- 50(4) 50(4) -- -- 50(4) -- -- -- -- -- ---- UL Listed 65 kA Available Fault Current Combination (480Y/ 277V) [A] 30(3) 30(3) 30(3) 30(3) -- -- -- -- -------- -- -- ---- UL Listed Combination (480V) [A] -- -- -- -- 100(5) 100(5) -- -- 100(5) 125 200(5) 225(5) 225(5) -- -- 225(5) (1) See the Rockwell Automation Global SCCR Tool at rok.auto/sccr for complete short-circuit current ratings. (2) 15 A max. fuse for Type 2 coordination. (3) Ratings apply when used with Bulletin 140U-D circuit breakers only. (4) Minimum enclosure size 12-3/8 x 7-5/8 s 7-1/4 inches (5) Minimum enclosure size 20 x 12 x 8 inches with two latches. Rockwell Automation Publication 100-TD013J-EN-P - April 2021 45 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 19 - Coil Data 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 Coil Type: Conventional Electronic - EI XXX X X X X XXX X X X X XXX XXX Operating Limits 50 Hz, 60 Hz, 50/60 Hz pick-up dropout [x Us] [x Us] DC (conventional) pick-up dropout [x Us] [x Us] DC (electronic--EQ, pick-up [x Us] EJ, EW, QJ) dropout [x Us] DC (electronic--EY) pick-up dropout [x Us] [x Us] DC (electronic--ED) pick-up dropout [x Us] [x Us] DC (electronic--EA) pick-up dropout [x Us] [x Us] 0.85...1.1 0.3...0.6 -- -- 0.7...1.25 0.3...0.4 0.8...1.25 0.3...0.4 0.7...1.12(1) 0.3...0.4 0.8...1.1 0.3...0.4 0.85....1.1 0.3...0.6 -- -- Coil Consumption 50 Hz, 60 Hz, 50/60 Hz pick-up hold-in [VA] [VA/W] 75 9.5/2.7 105 12.3/3.1 135 13.3/3.3 pick-up [W] -- -- -- DC (conventional) hold-in [W] -- -- -- pick-up DC (electronic--EQ, (avg/peak) [W] 10/17 16/25 EJ, QJ) hold-in [W] 1.7 2.5 pick-up DC (electronic--EY, (avg/peak) [W] 10/17 16/25 EW) hold-in [W] 1.9 2.7 pick-up DC (electronic--ED) (avg/peak) [W] 12/19 16/26 hold-in [W] 2.1 2.8 pick-up DC (electronic--EA) (avg/peak) [W] 14/22 18/29 hold-in [W] 3.0 4.0 Operating Times closing delay [ms] 15...30 15...30 15...30 15...30 AC opening delay [ms] 10...60 10...60 10...60 10...60 With RC module closing delay [ms] 10...60 10...60 10...60 10...60 10...60 opening delay [ms] -- DC (conventional) closing delay [ms] -- -- -- -- -- -- 50...80 -- 7...15 With integrated diode opening delay [ms] -- -- -- -- 17...23 With external diode opening delay [ms] -- -- -- -- -- 80...125 closing delay [ms] 20...50 -- DC (electronic--EQ, opening delay [ms] 20...50 -- EJ) Max. Ripple ±15% -- min. OFF time [ms] 50 -- closing delay [ms] 20...50 -- DC (electronic--EW, opening delay [ms] 23...33 -- EY, ED, EA) Max. Ripple ±15% -- min. OFF time [ms] 50 -- 60 72 85 90*200 90*400 97 XXX X X X ------ -- -- -- 0.85....1.1 0.3...0.6 0.8...1.1 0.1...0.6 -- -- -- -- -- -- -- -- 235 400 19.6/5 24/9 200 325 4 5 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20...40 10...60 10...60 20...40 20...40 220V 20...35 -- -- -- -- -- -- -- -- -- 20...40 20...40 20...40 15...25 20...25 20...25 15...25 20...25 20...25 220V 20...35 -- -- -- -- -- -- -- -- -- 46 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 19 - Coil Data (Continued) 100/104-C, 100S/104S-C 09 12 16 23 30 37 40*200 40*400 43 55 60 72 85 90*200 90*400 97 Coil Type: Conventional Electronic - EI XXX X X X X XXX X X X X X X X XXX X X X X ------ -- XX ---- closing delay [ms] 20...50 -- -- -- opening delay [ms] 16...21 DC (electronic--QJ) Max. Ripple ±15% -- -- -- -- -- -- min. OFF time [ms] 50 -- -- -- (1) 0.7...1.25 at 110V DC Table 20 - Auxiliary Contacts, Auxiliary Contact Blocks, and Pneumatic Timers Switching of AC Loads AC-12 Ith AC-15 at rated voltage of Switching of DC Loads DC-12 L/R < 1 ms resistive loads at DC-14L/R <15 ms inductive loads with economy resistor in series at DC-13 switching electromagnets at Fuse gG at 40 °C (104 °F) at 60 °C (140 °F) 24V 42/48V 120V 230V 240V 400V 415V 500V 690V 24V DC 48V DC 110V DC 220V DC 440V DC 24V DC 48V DC 110V DC 220V DC 440V DC 24V DC 48V DC 110V DC 220V DC 440V DC Short-circuit protection with no welding of contacts per IEC 60947-5-1 Protective Separation per IEC 60947-1, Annex N Min. switching capacity according to IEC 60947-5-4 Load Carrying Capacity per UL/CSA Rated voltage AC Continuous rating 40 °C (104 °F) Switching capacity AC Rated voltage DC Switching capacity DC Internal Front mounted Front mounted (Bifurcated) Side-mounted [A] 20 [A] 20 [A] 10 [A] 10 [A] 10 [A] 10 [A] 10 [A] 6 [A] 6 [A] 2.5 [A] 1 10 10 10 6 6 6 6 3 6 6 3 6 6 3 6 5.5 3 5.5 5 3 5 3 2 3 3 2 3 1.6 1.2 1.6 1 0.7 1 [A] 12 [A] 9 [A] 3.5 [A] 0.55 [A] 0.2 [A] 9 [A] 5 [A] 2 [A] 0.4 [A] 0.16 [A] 5 [A] 3 [A] 1.2 [A] 0.6 [A] 0.3 12 6 6 9 3.2 3.2 3.5 1 1 0.55 0.5 0.5 0.2 0.2 0.2 9 2 2 5 1.6 1.6 2 0.3 0.3 0.4 0.12 0.12 0.16 0.05 0.05 5 2.5 5 3 1.5 2.5 1.2 0.6 0.68 0.6 0.3 0.32 0.15 0.15 0.15 [A] 20 [A] 20 between load and auxiliary circuit 320V 17V/10mA 10 10 10 10 10 10 between load and auxiliary circuit 440V 17V/5mA 5V/3mA 17V/10mA [V] [A] 10 [A] [V] [A] P600 max.600 10 A600 max.600 Q600 10 10 Q600 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 47 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Specifications Table 21 - General Specifications Attribute Rated Isolation Voltage Ui IEC UL, CSA Rated Impulse Voltage Withstand Uimp Rated Voltage Ue AC 50/60 Hz DC Insulation Class of the Coil Rated coil frequency Ambient Temperature Storage Operation at rated voltage at 70 °C (158 °F) Climatic Withstand Max. Altitude of Installation Site [V] [V] [kV] [V] [V] [ °C ( °F)] [ °C ( °F)] [m] Protection Class Single contactor cover Contactor with frame terminal block Auxiliary contact Protection against Accidental Contact Resistance to Shock Resistance to Vibration Mechanically Linked Contacts IEC60947-5-1,Annex L Mirror Contacts IEC60947-4 Annex F Value 690 600 6 115, 200, 230, 240, 400, 415, 460, 500, 575, 690 24, 48, 110, 220, 440 Class F per IEC 60085, UL Class 105 AC 50/60Hz, DC -55...+80 (-67...176) -40...+60 (-40...140) 15% current reduction against 60 °C (140 °F) values IEC 60068-2-1/-2/-30 2000 NN, per IEC60947-1 100-C09...C23: IP2X from all directions 100-C30...C55: IP2X from front with front (upper) terminal wired 100-C60...C97: IP2X from front with front (upper) terminal wired (min. wire size 16 mm2 or #6 AWG) -- -- IP2X Finger- and back-of-hand proof per VDE0106, part100 IEC60068-2-27 IEC60068-2-6 100-/100S-C09...C55+100-FA/-FB/-FC, (except L11, L22),100-/100S-C09...C55+ 100-FAB/-FBB/-FCB 100-/100S-C09...C97+100-FA/-FB/-FC, (except L11, L22),100-/100S-C09...C97+ 100-SA/SB, 100-/100S-C09...C97+100-FAB/-FBB/-FCB Table 22 - Standards Compliance and Certifications Standards Compliance Certifications 100-C IEC Contactors EN/IEC 60947-4-1, 60947-5-1 CE Marked IEC 60947 Type "2" Coordination CCC CSA 22.2. No. 14 cULus Listed (File No. E3125; Guide NLDX, NLDX7) UL 508 Meets the material restrictions for European Directive 2002/95/IEC-EU-RoHS 100S-C IEC Safety Contactors EN50205 CE Marked CSA C22.2 No. 14 SUVA Third-Party Certified UL 508 cULus Listed (File No. E3125; Guide NLDX, NLDX7) EN/IEC 60947-4 IEC 60947-4-1 Annex F -- Mirror Contacts IEC 60947-5-1 Annex L -- Mechanically Linked Contacts Meets the material restrictions for European Directive 2002/95/IEC-EU-RoHS Standards Compliance Certifications 100Q-C Capacitor-switching Contactors IEC 60947-4 CE Marked CSA C22.2 No. 14 cULus Listed (File No. E 41850, Guide NLDX, NLDX7) UL 508 Meets the material restrictions for European Directive 2002/95/IEC-EU-RoHS 48 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Life-Load Curves Bulletin 100-C/104-C IEC contactors are designed for superior performance in a wide variety of applications. When selecting IEC products, the user must give consideration to the specific load, utilization category, and required electrical life of the application. The life-load curves shown here are based on Rockwell Automation tests according to the requirements defined in IEC 60947-4-1. Since contact life in application is dependent on environmental conditions and duty cycle, actual application contact life may vary from that indicated by the curves shown here. To find the estimated electrical life of the contactor, follow these guidelines: 1. Identify the appropriate utilization category from Table 23. 2. Choose the graph for the utilization category selected. 3. Locate the intersection of the life-load curve for the appropriate contactor with the application's operational current (Ie) found on the horizontal axis. 4. Read the estimated contact life along the vertical axis. Contact Life for Mixed Utilization Categories AC-3 and AC-4: In many applications, the utilization category cannot be defined as either purely AC-3 or AC-4. In those applications, the electrical life of the contactor can be estimated from the following equation: Lmixed = Lac3/[1 + Pac4*(Lac3/Lac4 1)], where: Lmixed = Approximate contact life in operations for a mixed AC-3/AC-4 utilization category application Lac3 = Approximate contact life in operations for a pure AC-3 utilization category (from the AC-3 life-load curves) Lac4 = Approximate contact life in operations for a pure AC-4 utilization category (from the AC-4 life-load curves) Pac4 = Percentage of AC-4 operations Table 23 - Utilization Category Determination Test Conditions AC-1 Resistance Furnaces: Non inductive or slightly inductive loads AC-2 Slip-ring motors: Starting and reversing AC-3 Squirrel-cage motors: Starting and stopping of running motors AC-4 Squirrel-cage motors: Starting, plugging(1), inching(2) AC-15 Solenoids: Contactors, valves and lifting magnets Ie < 17 A Ie > 17 A Ie < 17 A Ie > 17 A Making I/Ie U/Ue cos Ic/Ie 1 1 0.95 1 2.5 1 0.65 2.5 6 1 0.65 1 6 1 0.35 1 6 1 0.65 6 6 1 0.35 6 10 1 0.7 1 (1) Plugging is understood as stopping or reversing the motor rapidly by reversing motor primary connections while the motor is running. (2) Inching (jogging) is understood as energizing a motor once or repeatedly for short periods to obtain small movements of the driven mechanism. Breaking Ur/Ue 1 1 0.17 0.17 1 1 1 cos 0.95 0.65 0.65 0.35 0.65 0.35 0.4 · Ie Rated operational current · I Making Current · Ic Breaking Current · U Off-load voltage · Ue Rated voltage · Ur Recovery voltage Rockwell Automation Publication 100-TD013J-EN-P - April 2021 49 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Figure 11 - AC-1, 40 °C (104 °F) Non- or slightly inductive loads, resistance furnaces; Ue = 230...690V 10E+06 C09 C12 C16 C23 C30 C40 C37 C43 C60 C72 C85 C97 / C90 Operating cycles 01E+06 C90 10E+04 1 10 100 Rated operating current I AC-1 [A] e Figure 12 - AC-2, Switching of slip-ring motors; Ue = 230...400...460V 10E+06 C16 C23 C30 C37 C43 C12 C60 C72 C85 C97 C09 01E+06 1000 Operating cycles 10E+04 1 50 10 100 Rated operating current Ie AC-2 [A] Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Figure 13 - AC-3, Switching of squirrel-cage motors while starting; Ue = 230...400...460V C09 C12 C16 10E+06 C23 C30 C37 C43 C60 C72 C85 C97 01E+06 Operating cycles 10E+04 1 10 100 Rated operating current Ie AC-3 [A] Figure 14 - AC-3, Switching of squirrel-cage motors while starting; Ue = 500...575V 10E+06 C09 C12 C16 C23 C30 C37 C43 C60 C72 C85 C97 01E+06 Operating cycles 10E+04 1 10 Rated operating current Ie AC-3 [A] Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100 51 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Figure 15 - AC-3, Switching of squirrel-cage motors while starting; Ue = 690V C09 C12 C16 10E+06 C23 C30 C37 C43 C60 C72 C85 C97 01E+06 Operating cycles Operating cycles C09 C12 C16 C23 C30 C37 C43 C60 C72 C85 10E+04 1 10 Rated operational current Ie AC-3 [A] Figure 16 - AC-4, Switching of squirrel-cage motors; Ue = 230...690V 10E+06 01E+06 10E+04 01E+04 1 52 10 Rated operating current Ie AC-4 [A] Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100 C97 100 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Figure 17 - AC-3 & AC-4, 10% AC-4 Mixed operation of squirrel-cage motors; Ue = 230...400...460V C12 10E+06 C16 C23 C30 C37 C43 C09 C60 C72 C85 C97 01E+06 Operating cycles 10E+04 1 10 Rated operating current Ie AC-3 / AC-4 [A] Figure 18 - Heavy Duty Starting and Regular Short-time Operation 100 max. Starting time / Loading time [s] C09/12/16 C23 C30/37 C43 C60/72/85 C97 10 1 10 100 1000 Starting current / Short time current [A] Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100 10000 53 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Maximum Operating Rates Figure 19 - AC-1, 40 °C (104 °F) Non- or slightly inductive loads, resistance furnaces; Ue = 230...690V 30E+02 25E+02 Permissible switching rate [ops/hr] 20E+02 15E+02 10E+02 C09/C12/C16/C23 05E+02 C60/C72/C85 C30/C37 C40/43 C90/C97 00E+00 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] Figure 20 - AC-2, Stepping of slip-ring motors; Ue = 230...460V 01E+04 Permissible switching rate [ops/hr] 10E+02 C09/C12/C16 C23/C30/C37/C43 C60/C72 C85/C97 01E+02 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] 54 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Life-Load Curves Figure 21 - AC-3, Switching of squirrel-cage motors while starting; Ue = 230...460V; Relative operating time 40%, Starting time tA = 0.25 s 01E+04 Permissible switching rate [ops/hr] 10E+02 C09/C12/C16 C23/C30/C37/C43 C60/C72/C85/C97 01E+02 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] Figure 22 - AC-4, Inching of squirrel-cage motors; Ue = 230...460V, Starting time tA = 0.25 s 10E+02 Permissible switching rate [ops/hr] 01E+02 C09 C12 C16 C23/C30 C37/C43/C60 C72 C85/C97 10E+00 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] Rockwell Automation Publication 100-TD013J-EN-P - April 2021 55 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Approximate Dimensions Approximate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. Bulletin 100-C/104-C, 100S-C/104S-C Approximate Dimensions Figure 23 - Bulletin 100-C/100S-C Contactors and Accessories c2 c1 c Figure 24 - Mounting Position -- 100-C Contactors; 100S-C AC Contactors and DC Contactors with Electronic Coils Figure 25 - Mounting Position -- 100S-C DC Contactors with Conventional Coils 56 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Approximate Dimensions Table 24 - AC Contactors and DC Contactors with 12V or 24V Electronic Coils Cat. No. 100-C09...100-C23 100-C30, 100-C37 100-C40 100-C43, 100-C55 100-C60...100-C97 100-C90 100S-C09...100S-C23 100S-C30, 100S-C37 100S-C43, 100S-C55 100S-C60...100S-C97 a 45 (1-25/32) 45 (1-25/32) 59 (2-21/64) 54 (2-1/8) 72 (2-53/64) 95 (3-47/64) 45 (1-25/32) 45 (1-25/32) 54 (2-1/8) 72 (2-53/64) b 81 (3-3/16) 81 (3-3/16) 81 (3-3/16) 81 (3-3/16) 122 (4-51/64) 122 (4-51/64) 81 (3-3/16) 81 (3-3/16) 81 (3-3/16) 122 (4-51/64) c 80.5 (3-11/64) 97.5 (4) 100.5 (3-61/64) 100.5 (3-61/64) 117 (4-39/64) 117 (4-39/64) 119.5 (4-3/4) 136.5 (5-37/64) 139.5 (5-11/16) 156 (6-11/32) c1 75.5 (2-31/32) 92.5 (3-41/64) 95.5 (3-49/64) 95.5 (3-49/64) 111.5 (4-25/64) 111.5 (4-25/64) 114.5 (4-43/64) 131.6 (5-11/32) 134.6 (5-29/64) 150.5 (6-1/8) c2 6 (15/64) 6.5 (1/4) 6.5 (1/4) 6.5 (1/4) 8.5 (21/64) 8.5 (21/64) 6 (15/64) 6.5 (1/4) 6.5 (1/4) 8.5 (21/64) Ød 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 4 - 5.4 (4 - 7/32) 4 - 5.4 (4 - 7/32) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 4 - 5.4 (4 - 7/32) d1 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 100 (3-15/16) 100 (3-15/16) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 100 (3-15/16) d2 35 (1-3/8) 35 (1-3/8) 45 (1-25/32) 45 (1-25/32) 55 (2-11/64) 55 (2-11/64) 35 (1-3/8) 35 (1-3/8) 45 (1-25/32) 55 (2-11/64) Table 25 - DC Contactors with Conventional Coils Cat. No. 100-C60D...100-C97D 100-C90D 100S-C60D...100S-C97D a 72 (2-53/64) 95 (3-47/64) 72 (2-53/64) b 122 (4-51/64) 81 (3-3/16) 122 (4-51/64) c 117 (4-39/64) 117 (4-39/64) 156 (6-11/32) c1 111.5 (4-25/64) 111.5 (4-25/64) 150.5 (6-1/8) c2 8.5 (21/64) 8.5 (21/64) 8.5 (21/64) Ød 4 - 5.4 (4 -7/32) 4 - 5.4 (4 - 7/32) 4 - 5.4 (4 - 7/32) d1 100 (3-15/16) 100 (3-15/16) 100 (3-15/16) d2 55 (2-11/64) 55 (2-11/64) 55 (2-11/64) Table 26 - DC Contactors with 36...48V, 48...72V, 110...125V, or 200...250V DC Electronic Coils Cat. No. 100-C09E...100-C23E 100-C30E...100-C37E 100-C40E 100-C43E...100-C55E 100S-C09E...100S-C23E 100S-C30E...100S-C37E 100S-C43E...100S-C55E a 45 (1-25/32) 45 (1-25/32) 59 (2-21/64) 54 (2-1/8) 45 (1-25/32) 45 (1-25/32) 54 (2-1/8) b 105 (4-1/8) 105 (4-1/8) 105 (4-1/8) 105 (4-1/8) 105 (4-1/8) 105 (4-1/8) 105 (4-1/8) c 80.5 (3-11/64) 97.5 (4) 100.5 (3-61/64) 100.5 (3-61/64) 119.5 (4-3/4) 136.5 (5-37/64) 139.5 (5-11/16) c1 75.5 (2-31/32) 92.5 (3-41/64) 95.5 (3-49/64) 95.5 (3-49/64) 114.5 (4-43/64) 131.6 (5-11/32) 134.6 (5-29/64) c2 6 (15/64) 6.5 (1/4) 6.5 (1/4) 6.5 (1/4) 6 (15/64) 6.5 (1/4) 6.5 (1/4) Ød 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) d1 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) 60 (2-23/64) d2 35 (1-3/8) 35 (1-3/8) 45 (1-25/32) 45 (1-25/32) 35 (1-3/8) 35 (1-3/8) 45 (1-25/32) Table 27 - 100-C/104-C Accessories Auxiliary contact block for front mounting Auxiliary contact block for side mounting Pneumatic Timing Module Electronic Timing Module Mechanical Interlock Mechanical Latch Interface Module Surge Suppressor Labeling with... Terminal Lug Kit Paralleling Links Auxiliary contact block for side mounting Electronic Timing Module Contactors with 2- or 4-pole 1- or 2-pole on coil terminal side on side of contactor on coil terminal side on coil terminal side label sheet marking tag sheet with clear cover marking tag adapter for System Bul. 1492W 100-C09...C23 100-C30...C37 100-C43...C55 100-C60...C97 100-C09...C23 100-C30...C37 1- or 2-pole on coil terminal side mm c/c1 + 39 a + 9 c/c1 + 58 b + 24 a + 9 c/c1 + 61 b + 9 b + 3 + 0 + 0 + 5.5 b + 53 b + 44 b + 52 b + 99 b + 78 c + 9/5 b + 85 a + 9 b + 24 (inches) (c/c1 + 1-37/64) (a + 23/64) (c/c1 + 2-23/64) (b + 15/16) (a + 23/64) (c/c1 + 2-31/64) (b + 23/64) (b + 1/8) (+ 0) (+ 0) (+ 7/32) (b + 2-3/32) (b + 1-47/64) (b+ 2-3/64) (b + 3-7/8) (b + 3-1/16) (c + 3/8) (b + 3-11/32) (a + 23/64) (b + 15/16) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 57 100-C/104-C, 100S-C/104S-C, 100Q-C Contactors Approximate Dimensions Table 27 - 100-C/104-C Accessories (Continued) Mechanical Interlock Interface Module Surge Suppressor Labeling with Contactors with on side of contactor on coil terminal side on coil terminal side label sheet marking tag sheet with clear cover marking tag adapter for System Bul. 1492W Bulletin 100Q-C Approximate Dimensions Figure 26 - Bulletin 100Q- Contactors mm a + 9 b + 9 b + 3 + 0 + 0 + 5.5 c2 (inches) (a + 23/64) (b + 23/64) (b + 1/8) (+ 0) (+ 0) (+ 7/32) c1 c Table 28 - AC Contactors and DC Contactors with 12V or 24V Electronic Coils Cat. No. 100Q-C16 100Q-C37 a 45 (1-25/32) 45 (1-25/32) b 81 (3-3/16) 81 (3-3/16) c 119.5 (4-3/4) 136.5 (5-37/64) c1 114.5 (4-43/64) 131.6 (5-11/32) c2 6 (15/64) 6.5 (1/4) Ød 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) d1 60 (2-23/64) 60 (2-23/64) d2 35 (1-3/8) 35 (1-3/8) Table 29 - DC Contactors with Conventional Coils Cat. No. 100Q-C16 100Q-C37 a 45 (1-25/32) 45 (1-25/32) b 81 (3-3/16) 81 (3-3/16) c 145.5 (5-49/64) 180.5 (7-5/32) c1 140.5 (5-37/64) 175.5 (6-61/64) c2 6 (15/64) 6.5 (1/4) Ød 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) d1 60 (2-23/64) 60 (2-23/64) d2 35 (1-3/8) 35 (1-3/8) Table 30 - DC Contactors with 36...48V, 48...72V, 110...125V, or 200...250V DC Electronic Coils Cat. No. 100Q-C16EA, -ED, or -EY 100Q-C37EA, -ED, or -EY a 45 (1-25/32) 45 (1-25/32) b 105 (4-1/8) 105 (4-1/8) c 119.5 (4-3/4) 136.5 (5-37/64) c1 114.5 (4-43/64) 131.6 (5-11/32) c2 6 (15/64) 6.5 (1/4) Ød 2 - 4.5 (2 -3/16) 2 - 4.5 (2 -3/16) d1 60 (2-23/64) 60 (2-23/64) d2 35 (1-3/8) 35 (1-3/8) 58 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100-E/104-E Contactors · 4...560 kW @ 400V · 5...900 Hp @ 460V · AC-1 ratings up to 2650 A · Compact dimensions · Electronic coils - AC/DC - Wide voltage range - Low power pick-up and hold-in - Optional PLC interface · Direct-on-line or reversing · 3 Main contacts · Complete range of accessories · Environmentally friendly 100-E09 Contactor 100-E116 Contactor 100-E860 Contactor The Bulletin 100-E/104-E contactor family, along with a wide range of accessories, provides the most compact and flexible contactor system available. 3-Pole AC- and DC-operated Direct-on-line Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 Auxiliary Contacts 60 °C 40 °C kW (50 Hz) Hp (60 Hz) AC-3 (400V) AC-1 (690V) 220-240V 380-400V 415V 440V 500V 690V 1000V 200V 230V 460V 575V N.O. N.C. 9 25 2.2 4 4 4 5.5 5.5 -- 2 2 5 7.5 1 0 0 1 1 0 12 28 3 5.5 5.5 5.5 7.5 7.5 -- 3 3 7.5 10 0 1 1 0 16 30 4 7.5 9 9 9 9 -- 5 5 10 15 0 1 26 45 6.5 11 11 15 15 15 -- 7.5 7.5 15 20 0 0 32 50 9 15 15 18.5 18.5 18.5 -- 10 10 20 25 0 0 38 50 11 18.5 18.5 22 22 22 -- 10 10 25 30 0 0 40 70 11 18.5 22 22 22 22 -- 10 15 30 40 0 0 52 100 15 22 30 30 30 30 -- 15 20 40 50 0 0 65 105 18.5 30 37 37 37 37 -- 20 25 50 60 0 0 80 125 22 37 45 45 45 45 35 25 30 60 75 0 0 96 130 25 45 55 55 55 55 40 30 30 60 75 0 0 116 160 37 55 55 75 75 63 55 30 40 75 100 1 1 146 225 45 75 75 90 90 90 75 40 50 100 125 1 1 190 275 55 90 90 110 110 132 110 50 60 125 150 1 1 205 350 55 110 110 132 132 160 132 60 75 150 200 1 1 265 400 75 132 132 160 160 200 160 75 100 200 250 1 1 305 500 90 160 160 160 200 250 185 100 125 250 300 1 1 370 600 110 200 200 200 250 315 200 125 150 300 350 1 1 400 600 110 200 220 220 250 315 220 125 150 350 400 1 1 460 700 132 250 250 250 315 355 280 150 200 400 500 1 1 580 800 160 315 355 355 400 500 355 200 250 500 600 1 1 750 1050 220 400 425 450 530 600 400 250 300 600 700 1 1 860 1350 250 475 500 560 630 800 555 -- 400 800 1000 1 1 1060 1650 315 560 630 710 710 1000 600 -- 450 900 1150 1 1 -- 1260 -- -- -- -- -- -- -- -- -- -- -- 1 1 -- 2050 -- -- -- -- -- -- -- -- -- -- -- 1 1 -- 2650 -- -- -- -- -- -- -- -- -- -- -- 1 1 (1) To order with built-in terminal lugs, add the letter "L" to the end of the catalog number (example: 100-E11611L) Coil voltage code and terminal position--see page 61 Cat No. 100-E0910 100-E0901 100-E1210 100-E1201 100-E1610 100-E1601 100-E2600 100-E3000 100-E3800 100-E4000 100-E5200 100-E6500 100-E8000 100-E9600 100-E11611 (1) 100-E14611 (1) 100-E19011 100-E20511 100-E26511 100-E30511 100-E37011 100-E40011 100-E46011 100-E58011 100-E75011 100-E86011 100-E106011 100-E126011 100-E205011 100-E265011 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 59 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100-E/104-E Contactors 4-Pole AC- and DC-operated Direct-on-line Contactors Rated Current at 40 °C [A] Main Poles Ie UL General Use (enclosed) AC-1 (690V) 600V N.O. N.C. 4 0 25 25 2 2 4 0 30 30 2 2 4 0 45 45 2 2 4 0 55 55 2 2 4 0 70 60 2 2 100 80 4 0 4 0 125 105 2 2 Coil voltage code and terminal position--see page 61 Auxiliary Contacts N.O. N.C. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3-Pole AC- and DC-operated Reversing Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 60 °C 40 °C kW (50 Hz) Hp (60 Hz) Cat No. 100-E09400 100-E09200 100-E16400 100-E16200 100-E26400 100-E26200 100-E38400 100-E38200 100-E40400 100-E40200 100-E52400 100-E80400 100-E80200 Auxiliary Contacts Cat No. AC-3 (400V) AC-1 (690V) 220-240V 380-400V 415V 440V 500V 690V 1000V 200V 230V 460V 575V N.O. N.C. 0 1 104-E0902 9 25 2.2 4 4 4 5.5 5.5 -- 2 2 5 7.5 1 1(1) 104-E0922(2) 0 1 104-E1202 12 28 3 5.5 5.5 5.5 7.5 7.5 -- 3 3 7.5 10 1 1(1) 104-E1222(2) 0 1 104-E1602 16 30 4 7.5 9 9 9 9 -- 5 5 10 15 1 1(1) 104-E1622(2) 26 45 6.5 11 11 15 15 15 -- 7.5 7.5 15 20 0 1(1) 104-E2602(2) 1 1 104-E2622 32 50 9 15 15 18.5 18.5 18.5 -- 10 10 20 25 0 1(1) 104-E3002(2) 1 1 104-E3022 38 50 11 18.5 18.5 18.5 22 22 -- 10 10 25 30 0 1(1) 104-E3802(2) 1 1 104-E3822 40 70 11 18.5 22 22 22 22 -- 10 15 30 40 1 1 104-E4022 52 100 15 22 30 30 30 30 -- 15 20 40 50 1 1 104-E5222 65 105 18.5 30 37 37 37 37 -- 20 25 50 60 1 1 104-E6522 80 125 22 37 45 45 45 45 35 25 30 60 75 1 1 104-E8022 96 130 25 45 55 55 55 55 40 30 30 60 75 1 1 104-E9622 116 160 55 55 55 75 75 63 55 30 40 75 100 1 1 104-E11622(3) 146 225 75 75 75 90 90 90 75 40 50 100 125 1 1 104-E14622(3) 190 275 90 90 90 110 110 132 110 50 60 125 150 1 1 104-E19022 205 350 110 110 110 132 132 160 132 60 75 150 200 1 1 104-E20522 265 400 132 132 132 160 160 200 160 75 100 200 250 1 1 104-E26522 305 500 160 160 160 160 200 250 185 100 125 250 300 1 1 104-E30522 370 600 200 200 200 200 250 315 200 125 150 300 350 1 1 104-E37022 400 600 200 200 220 220 250 315 220 125 150 350 400 1 1 104-E40022 460 700 250 250 250 250 315 355 280 150 200 400 500 1 1 104-E46022 580 800 315 315 355 355 400 500 355 200 250 500 600 1 1 104-E58022 750 1050 400 400 425 450 530 600 400 250 300 600 700 1 1 104-E75022 (1) The N.C. auxiliary contact is supplied as part of the mechanical/electrical interlock. (2) For AC control voltages only. (3) To order with built-in terminal lugs, add the letter "L" to the end of the catalog number (Example: 104-E11622L) Coil voltage code and terminal position--see page 61 60 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100-E/104-E Contactors Coil Voltage Codes For 3-Pole Contactors The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 100-E116KJ11 Electronic Coils V(1) 12-20V DC 100-E09...100-E370 Standard AC/DC -- 100-E09...100-E38 Low Consumption AC/DC EQ 100-E09...100-E38 Low Consumption/ Faster Drop-out DC -- 100-E116...100-E370(2) 100-E400...100-E750, 100-E1260 -- Standard AC/DC with PLC Input -- 100-E860...100-1060, 100-E2050...100-E2650 -- (1) AC voltages are at 50/60 Hz (2) When ordering coil with PLC input, the PLC input must be used (3) 24V...60V DC only For 3-Pole Reversing Contactors 24V DC -- -- QJ -- -- -- 24-60V AC, 20-60V DC 48-130V AC/DC 100-250V AC/DC 250-500V AC/DC KJ KY KD KN EJ -- -- -- -- -- -- -- -- -- ED EN EJ (3) EY ED EN -- -- ED -- The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 104-E116KJ11 Electronic Coils V(1) 12-20V DC 104-E09...104-E370 Standard AC/DC -- 104-E09...104-E38 Low Consumption AC/DC EQ 104-E09...104-E38 Low Consumption/ Faster Drop-out DC -- 104-E116...104-E370(2) 100-E400...104-E750, 104-E1260 -- Standard AC/DC with PLC Input -- 104-E860...104-1060, 104-E2050...104-E2650 -- (1) AC voltages are at 50/60 Hz (2) When ordering coil with PLC input, the PLC input must be used (3) 24V...60V DC only PLC Interface 24V 0V ON OFF Supply voltage A1 A2 X5 Contactor 1 ON 2 OFF_N 3 COMMON 24V DC -- -- QJ -- -- -- 24-60V AC, 20-60V DC 48-130V AC/DC 100-250V AC/DC 250-500V AC/DC KJ KY KD KN EJ -- -- -- -- -- -- -- -- -- ED EN EJ (3) EY ED EN -- -- ED -- For 4-Pole Contactors The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 100-E09KD400. Electronic Coils V(1) 100-E09...100-E80 100-E09...100-E38 100-E09...100-E38 Standard AC/DC Low Consumption AC/DC Low Consumption/Faster Drop-out DC (1) AC voltages are at 50/60 Hz 12-20V DC -- EQ -- 24V DC -- -- QJ 24-60V AC, 20-60V DC KJ EJ -- 48-130V AC/DC 100-250V AC/DC 250-500V AC/DC KY KD KN -- -- -- -- -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 61 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100S-E Safety Contactors Product Selection--100S-E Safety Contactors · Electronic Coils · 3 Main Contacts · Direct-on-line · Low-power auxiliary contacts for feedback circuit · Mirror contact performance 3-Pole AC- and DC-operated Safety Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 60 °C 40 °C kW (50 Hz) 100S-E09 Contactor 100S-E80 Contactor Hp (60 Hz) Auxiliary contacts per contactor Direct-on-line Contactor AC-3 AC-1 (400V) (690V) 220240V 380400V 415V 440V 500V 690V 1000V 200V 230V 460V 575V N.O. N.C. N.C.(1) Cat No. 0 0 5 100S-E0905C 9 25 2.2 4 4 4 5.5 5.5 -- 2 2 5 7.5 2 1 0 0 3 100S-E0923C 4 100S-E0914C 3 0 2 100S-E0932C 0 0 5 100S-E1205C 2 0 3 100S-E1223C 12 28 3 5.5 5.5 5.5 7.5 7.5 -- 3 3 7.5 10 1 0 4 100S-E1214C 3 0 2 100S-E1232C 0 0 5 100S-E1605C 16 30 4 7.5 9 9 9 9 -- 5 5 10 15 2 1 0 0 3 100S-E1623C 4 100S-E1614C 3 0 2 100S-E1632C 0 0 4 100S-E2604C 26 45 6.5 11 11 15 15 15 -- 7.5 7.5 15 20 1 2 0 0 3 100S-E2613C 2 100S-E2622C 3 0 1 100S-E2631C 0 0 4 100S-E3004C 1 0 3 100S-E3013C 32 50 9 15 15 18.5 18.5 18.5 -- 10 10 20 25 2 0 2 100S-E3022C 3 0 1 100S-E3031C 0 0 4 100S-E3804C 38 50 11 18.5 18.5 22 22 22 -- 10 10 25 30 1 2 0 0 3 100S-E3813C 2 100S-E3822C 3 0 1 100S-E3831C 0 0 4 100S-E4004C 40 70 11 18.5 22 22 22 22 -- 10 15 30 40 1 2 0 0 3 100S-E4013C 2 100S-E4022C 3 0 1 100S-E4031C 0 0 4 100S-E5204C 1 0 3 100S-E5213C 52 100 15 22 30 30 30 30 -- 15 20 40 50 2 0 2 100S-E5222C 3 0 1 100S-E5231C (1) The N.C. contact meets IEC 60947-4-1 Annex F requirements for mirror contact performance. 62 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100S-E Safety Contactors 3-Pole AC- and DC-operated Safety Contactors (Continued) Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 60 °C 40 °C kW (50 Hz) Hp (60 Hz) Auxiliary contacts per contactor Direct-on-line Contactor AC-3 AC-1 (400V) (690V) 220240V 380400V 415V 440V 500V 690V 1000V 200V 230V 460V 575V N.O. N.C. N.C.(1) Cat No. 0 0 4 100S-E5204C 52 100 15 22 30 30 30 30 -- 15 20 40 50 1 2 0 0 3 100S-E5213C 2 100S-E5222C 3 0 1 100S-E5231C 0 0 4 100S-E6504C 1 0 3 100S-E6513C 65 105 18.5 30 37 37 37 37 -- 20 25 50 60 2 0 2 100S-E6522C 3 0 1 100S-E6531C 0 0 4 100S-E8004C 80 125 22 37 45 45 45 45 35 25 30 60 75 1 2 0 0 3 100S-E8013C 2 100S-E8022C 3 0 1 100S-E8031C 0 0 4 100S-E9604C 96 130 25 45 55 55 55 55 40 30 30 60 75 1 2 0 0 3 100S-E9613C 2 100S-E9622C 3 0 1 100S-E9631C 116 160 37 55 55 75 75 55 55 30 40 75 100 1 1 1 100S-E11612C (2) 146 225 45 75 75 90 90 90 75 40 50 100 125 1 1 1 100S-E14612C (2) 190 275 55 90 90 110 90 132 110 50 60 125 150 1 1 1 100S-E19012C 205 350 55 110 110 132 110 160 132 60 75 150 200 1 1 1 100S-E20512C 265 400 75 132 132 160 160 200 132 75 100 200 250 1 1 1 100S-E26512C 305 500 90 160 160 160 200 250 132 100 125 250 300 1 1 1 100S-E30512C 370 600 110 200 200 200 220 315 132 125 150 300 350 1 1 1 100S-E37012C 400 600 110 200 220 220 250 315 220 125 150 350 400 1 1 1 100S-E40012C 460 700 132 250 250 250 315 355 280 150 200 400 500 1 1 1 100S-E46012C 580 800 160 315 355 355 400 500 355 200 250 500 600 1 1 1 100S-E58012C 750 1050 220 400 425 450 530 600 400 250 300 600 700 1 1 1 100S-E75012C (1) The N.C. contact meets IEC 60947-4-1 Annex F requirements for mirror contact performance. (2) To order with built-in terminal lugs, add the letter "L" to the end of the catalog number (example: 100S-E11612CL) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 63 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100S-E Safety Contactors 4-Pole AC- and DC-operated Safety Contactors Rated Operational Current Ie [A] 40 °C Main Poles per contactor Auxiliary contacts per contactor AC-1 UL General Use (Enclosed) 690V 600V N.O. N.C. N.O. 0 25 25 4 0 1 2 3 0 30 30 4 0 1 2 3 0 1 45 45 4 0 2 3 70 60 4 0 2 100 80 4 0 2 125 105 4 0 2 (1) The N.C. contact meets IEC 60947-4-1 Annex F requirements for mirror contact performance. N.C.(1) 4 3 2 1 4 3 2 1 4 3 2 1 2 2 2 Direct-on-line Contactor Cat No. 100S-E09404C 100S-E09413C 100S-E09422C 100S-E09431C 100S-E16404C 100S-E16413C 100S-E16422C 100S-E16431C 100S-E26404C 100S-E26413C 100S-E26422C 100S-E26431C 100S-E40422C 100S-E52422C 100S-E80422C 3-Pole AC- and DC-operated Reversing Safety Contactors Rated Operational Current Ie [A] Ratings for switching AC motors - AC-2, AC-3 60 °C 40 °C kW (50 Hz) Hp (60 Hz) Auxiliary contacts per contactor Direct-on-line Contactor AC-3 AC-1 (400V) (690V) 220240V 380400V 415V 440V 500V 690V 1000V 200V 230V 460V 575V N.O. 9 25 2.2 4 4 4 5.5 5.5 -- 2 2 5 7.5 1 12 28 3 5.5 5.5 5.5 7.5 7.5 -- 3 3 7.5 10 1 16 30 4 7.5 9 9 9 9 -- 5 5 10 15 1 26 45 6.5 11 11 15 15 15 -- 7.5 7.5 15 20 3 32 50 9 15 15 18.5 18.5 18.5 -- 10 10 20 25 3 38 50 11 18.5 18.5 18.5 22 22 -- 10 10 25 30 3 3 40 70 11 18.5 22 22 22 22 -- 10 15 30 40 1 3 52 100 15 22 30 30 30 30 -- 15 20 40 50 1 3 65 105 18.5 30 37 37 37 37 -- 20 25 50 60 1 3 80 125 22 37 45 45 45 45 35 25 30 60 75 1 3 96 130 25 45 55 55 55 55 40 30 30 60 75 1 (1) The N.C. contact meets IEC 60947-4-1 Annex F requirements for mirror contact performance. N.C.(1) 4 4 4 3 3 3 3 5 3 5 3 5 3 5 3 5 Cat No. 104S-E0928C 104S-E1228C 104S-E1628C 104S-E2666C 104S-E3066C 104S-E3866C 104S-E4066C 104S-E40210C 104S-E5266C 104S-E52210C 104S-E6566C 104S-E65210C 104S-E8066C 104S-E80210C 104S-E9666C 104S-E96210C 64 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Product Selection--100S-E Safety Contactors Coil Voltage Codes For 3-Pole Safety Contactors The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 100S-E09EJ14C Electronic Coils V(1) 12-20V DC 24V DC 24-60V AC, 20-60V DC 100S-E09...100S-E370 Standard AC/DC -- -- KJ 100S-E09...100S-E38 Low Consumption AC/DC EQ -- EJ 100S-E09...100S-E38 Low Consumption/ Faster Drop-out DC -- QJ -- 100S-E116...100S-E370(2) -- -- -- 100S-E400...100S-E750, 100S-E1260 Standard AC/DC with 24V DC PLC Interface -- 100S-E860...100S-E1060, 100S-E2050...100S-E2650 -- -- EJ (3) -- -- (1) AC voltages are at 50/60 Hz (2) When ordering coil with PLC input, the PLC input must be used (3) 24V...60V DC only 48-130V AC/DC KY -- -- -- EY -- 100-250V 250-500V AC/DC AC/DC KD KN PLC Interface -- -- -- -- 24V 0V Supply voltage A1 A2 ED EN ED EN ON OFF X5 Contactor 1 ON 2 OFF_N ED -- 3 COMMON For 3-Pole Reversing Safety Contactors The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 104S-E09KD28C Electronic Coils 104S-E09...104S-E96 104S-E09...104S-E38 V(1) Standard AC/DC Low Consumption AC/DC (1) AC voltages are at 50/60 Hz For 4-Pole Safety Contactors 12-20V DC -- EQ 24V DC -- -- 24-60V AC, 20-60V DC 48-130V AC/DC 100-250V AC/DC 250-500V AC/DC KJ KY KD KN EJ -- -- -- The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 100S-E09KD422C Electronic Coils 100S-E09...100S-E96 100S-E09...100S-E38 100S-E09...100S-E38 V(1) Standard AC/DC Low Consumption AC/DC Low Consumption/ Faster Drop-out DC (1) AC voltages are at 50/60 Hz 12-20V DC -- EQ -- 24V DC -- -- QJ 24-60V AC, 20-60V DC 48-130V AC/DC 100-250V AC/DC 250-500V AC/DC KJ KY KD KN EJ -- -- -- -- -- -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 65 100-E/104-E, 100S-E/104S-E Contactors Accessories Accessories Auxiliary Contact Blocks with Standard Auxiliary Contacts Description Auxiliary Contact Blocks for Front Mounting · 1-pole · Quick and easy mounting without tools · Screw connection terminals · Switching down to 12V, 3mA · Mirror contact performance to the main contactor poles · L= Late break N.C./early make N.O. Connection Diagrams N.O. N.C. 10 -3 -1 NO NC 01 -4 -2 1L 0 -7 -5 NO NC 0 1L -8 -6 For Use With 100-E09...100-E96 100-E09...100-E96 Cat. No. 100-EFA10 100-EFA01 100-EFAL10 100-EFAL01 Auxiliary Contact Blocks for Front Mounting · 4-pole · Quick and easy mounting without tools · Screw connection terminals · Switching down to 12V 3mA · Mirror contact performance to the main contactor poles Auxiliary Contact Blocks for Front Mounting · 4-pole · Quick and easy mounting without tools · Screw connection terminals · Switching down to 12V 3mA · Mirror contact performance to the main contactor poles 21 31 43 53 2 2 NC NC NO NO 100-EFC22 22 32 44 54 21 33 43 53 3 1 NC NO NO NO 100-EFC31 22 34 44 54 100-E0910...100-E1610 21 31 43 53 1 3 NC NC NC NO 100-EFC13 22 32 44 54 21 31 41 51 0 4 NC NC NC NC 22 32 42 52 13 21 31 43 2 2 NO NC NC NO 14 22 32 44 100-EFC04 100-EFB22 13 21 33 43 3 1 NO NC NO NO 100-EFB31 14 22 13 23 100-E2600...100-E9600 34 44 100-E09400...100-E80400 33 43 100-E09200...100-E80200 4 0 NO NO NO NO 100-EFB40 14 24 34 44 11 21 31 41 0 4 NC NC NC NC 100-EFB04 12 22 32 42 53 61 71 83 2 2 NO NC NC NO 54 62 72 84 53 61 73 83 3 1 NO NC NO NO 54 62 74 84 100-EFA22 100-EFA31 53 63 73 83 4 0 NO NO NO NO 54 64 74 84 100-E09...100-E96 100-EFA40 53 61 71 81 1 3 NO NC NC NC 100-EFA13 54 62 72 82 51 61 71 81 0 4 NC NC NC NC 52 62 72 82 100-EFA04 66 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Auxiliary Contact Blocks with Standard Auxiliary Contacts (Continued) 100-E/104-E, 100S-E/104S-E Contactors Accessories Description Auxiliary Contact Blocks for Front Mounting with A1/A2 Coil Terminal Blocks · 2-pole · Quick and easy mounting without tools · Screw connection terminals · Switching down to 12V, 3mA · Mirror contact performance to the main contactor poles Auxiliary Contact Blocks for Side Mounting · 2-pole · Two-way numbering for right or left mounting on the contactor · With or without sequence terminal designations · Quick and easy mounting without tools · Screw connecting terminals · Switching down to 12V, 3mA · Mirror contact performance to the main contactor poles Connection Diagrams For Use With Cat. No. N.O. N.C. 11 21 33 NC NO 100-E0910...100-E1610 100-EFC11T 11 22 34 13 21 NO NC 14 22 100-E2600...100-E6500 100-E09400...100-E52400 100-EFB11T 100-E09200...100-E40200 11 13 21 NO NC 100-E26...100-E96 100-ESB11 14 22 11 -3 -1 NO NC -4 -2 100-E09...100-E96 100-ESA11 Auxiliary Contact Blocks for Front Mounting for Severe 10 Industrial Applications 01 · 1-pole · Available in two IP degrees of ingress protection 10 B, B2 with built-in microswitch, IP40 degree of protection 0 1 (IP20 terminals) B3, B4 with built-in microswitch, IP67 degree of protection (IP20 terminals), 250V, 2 A max. 10 01 10 · Available in two voltage and current ratings B, B3: 125V, 0.1 A max., 3V, 1 mA min. 01 B2, B4: 250V, 2 A max., 17V, 1 mA min. Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations · 2-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Mirror contact performance to the main contactor poles · Low power switching down to 24V 50 mA 11 11 Low-power Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations (1) · 1-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Mirror contact performance to the main contactor poles · Electronic compatible, 3V 1 mA 10 01 Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations · 2-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Mirror contact performance to the main contactor poles · Low power switching down to 24V 50 mA 11 11 Low-power Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations (1) · 1-pole · Two-way numbering for right or left mounting on the contactor · Quick and easy mounting without tools · Mirror contact performance to the main contactor poles · Electronic compatible, 3V 1 mA 10 01 (1) No auxiliary contacts blocks can be mounted on the outside of the 100-ES1-B* or 100-ES3-B* devices. NC 25 -3 -1 NO NC -4 -2 100-E09...100-E96 100-ESA10B 100-ESA01B 100-ESA10B2 100-ESA01B2 100-ESA10B3 100-ESA01B3 100-ESA10B4 100-ESA01B4 NO 13 NC 21 NC 32 NO 44 NC 72 NO 84 NC 31 NO 43 NO 14 NO 53 NC 22 NC 61 NO 28 NC 71 NO 83 NO 54 NC 62 NO 17 NC 26 NO 27 NO 18 NC 15 NC 32 NO 44 NC 25 NC 16 NO 13 NC 21 NC 72 NC 31 NO 84 NO 43 NO 14 NO 53 NC 22 NC 61 NO 28 NC 71 NO 83 NO 54 NC 62 NO 17 NC 26 NO 27 NO 18 NC 15 NC 16 100-E116...E370, left or right inside mounting 100-ES1-11 100-E116...E370, left or right outside mounting 100-ES2-11 100-E116...E370, left or right inside or outside 100-ES1-B10 mounting 100-E116...E370, left or right inside or outside 100-ES1-B01 mounting 100-E400...E2650, left or right inside mounting 100-ES3-11 100-E400...E2650, left or right outside mounting 100-ES4-11 100-E400...E2650, left or right inside or outside 100-ES3-B10 mounting 100-E400...E2650, left or right inside or outside 100-ES3-B01 mounting Rockwell Automation Publication 100-TD013J-EN-P - April 2021 67 100-E/104-E, 100S-E/104S-E Contactors Accessories Mechanical Interlocks Description Connection Diagrams Mechanical Interlock · For interlocking of two contactors · Two fixing clips included Mechanical only, without auxiliary contacts For Use With 100-E09...100-E38 (3 pole), 100-E09400...100-E38400 100-E40...100-E96 (3 pole), 100-E40400...100-E80400 Cat. No. 100-EMCA00A(1) 100-EMCA00B(1) Mechanical Interlock · For interlocking of two contactors. · Interlocking of different sizes possible Mechanical only, without auxiliary contacts Mechanical and Electrical Interlock · For interlocking of two contactors · Two fixing clips, a mechanical interlock and an electrical interlock block with A2- 01NC A2 connection included · Front-face connection of the electrical interlock block connects the 2 built-in Mechanical/electrical interlock KM1 N.C. interlocking contacts with the A2 two coils · The electrical diagram is used with the A2-A2 connection (1) Must be ordered in multiples of 10 pieces. (2) Mounting plate ordered separately (3) Mounting plate included 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E116...100-E146 to 100-E190...100-E205 100-E190...100-E205 to 100-E265...100-E370 100-E400...100-E750, 100-E1260 (2) 100-E860...100-E1060, 100-E2050...100-E2650 (3) Rod for vertical mounting 100-E400...E750 reversing contactors 100-EM1-00 100-EM4-00 100-EM5-00 100-EM2-00 100-EM3-00 100-EVR750 01NC 100-E09...100-E38 (3 pole), 100-E09400...100-E38400 100-EMCA02 KM2 A2 Electronic Timers Description Electronic Timing Module--ON-Delay · Delay of the contactor solenoid · The contactor is energized at the end of the delay time Electronic Timing Module--OFF-Delay · Delay of the contactor solenoid · After interruption of the control signal, the contactor is de-energized a the end of the delay time ON-Delay 0.1...1 s 1...10 s 10...100 s OFF-Delay 0.1...1 s 1...10 s 10...100 s N.O. N.C. 11 11 Connection Diagrams For Use With 55NC 67NO A1 KM1 A2 56NC 68NO 55NC 67NO A1 KM1 A2 56NC 68NO 100-E09...100-E96 100-E09...100-E96 Cat. No. 100-ETA 100-ETB DC Interface Module Description DC Interface · Receives 24V DC signals from PLCs or other low output power sources and switches AC control power to operate the coils of the contactor · Coil voltage: 24...250V AC 50/60 Hz · Rated control circuit voltage Uc: 24VDC For Use With Pkg. Qty. 1 Cat. No. 100-EJE 100-E09...100-E96 10 100-EJEM 68 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Accessories Mechanical Latch Description Mechanical Latch · Ensures contactor or contactor relay is switched on even if there is a voltage failure · Opening controlled either electrically by AC or DC impulse or manually by button · Front mounting Rated Voltage [V] V AC, 50/60 Hz V DC 24...60 24...60 48...130 48...130 100...250 100...250 250...500 250...500 24...60 24...60 48...130 48...130 100...250 100...250 250...500 250...500 Connection Diagram For Use With 100-E09...100-E65 E1 Uc A1 E2 A2 100-E80, 100-E96 Additional Coil Terminal Block Description For Use With Pkg. Qty. Additional Coil Terminal Block · Allows bottom access to the coil terminals in addition to top access 100-E09...100-E96 10 Cat. No. 100-EFL11KJ 100-EFL11KY 100-EFL11KD 100-EFL11KN 100-EFL12KJ 100-EFL12KY 100-EFL12KD 100-EFL12KN Cat. No. 100-ECT Protective Covers Description Protective Cover · Provides protection against unintended manual operation · Sealable and Transparent For Use With 100-E09...100-E96 Pkg. Qty. 10 100-EF (4-pole only) 10 Cat. No. 100-ESCCA 100-ESCFA Functional Markers Description Functional Markers · 256 markers (16 per card) printable on HTP500 thermal transfer printer and AMS 500 marking table · 7 x 20 mm (0.276 x 0.787 in) For Use With Pkg. Qty. 100-E09...100-E96 16 Terminal Block Description Additional Terminal Blocks · Designed to increase wire size capacity of 3-pole contactors · 3-pole terminal blocks with IP20 terminals For Use With Pkg. Qty. 100-E26...100-E38 2 Terminal Shrouds Description Terminal Shrouds · IP20 terminal protection against accidental direct contact after wiring (EN 50274) · 3-pole and 4-pole No. of Poles 3-pole 3-pole 4-pole For Use With 100-E40...100-E65 100-E80, 100-E96 100-E40, 100-E52 4-pole 100-E80 Cat. No. 100-EFMS Cat. No. 100-ECT38 Cat. No. 100-ESC65 100-ESC96 100-ESC52 100-ESC80 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 69 100-E/104-E, 100S-E/104S-E Contactors Accessories Paralleling Terminals Description Paralleling Terminals · To connect poles in parallel and thus increase the AC-1 load passing through the flow path made up of the parallel-connected poles For Use With 100-E09, 100-E12, 100-E16 100-E26, 100-E30, 100-E38 Cat. No. 100-ECP16 100-ECP38 Terminal Lugs Description Terminal Lug Kit · Standard on 100-E116*L...100-E146*L contactors · Set of two Terminal Lugs · Set of three Wire Sizes 2 x 6 AWG...3/0 AWG 6 AWG...300 MCM 4 AWG...400 MCM (2x) 4 AWG...500 MCM (2x) 2/0 AWG...500 MCM (3x) 2/0 AWG...500 MCM (4x) 4/0 AWG...500 MCM (4x) 1/0 AWG...750 MCM (6x) 1/0 AWG...750 MCM For Use With 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E265...100-E370 100-E400...100-E460 100-E580...E750 100-E860 100-E1060 100-E1060 Cat. No. 100-ECL146 100-ETL205 100-ETL370 100-ETL370B 100-ETL580 100-ETL750 100-ETL860 100-ETL1060 100-ETL1060B Terminal Shrouds and Shields Description Wires with Compression Contactor with Terminal Lugs Lugs For Use With X -- 100-E116...100-E146 -- X 100-E190...100-E205 X Terminal Shrouds · Not applicable when using -- 105-PW* or 170-PW* power X wiring kits · Pkg. Qty:2 -- X -- 100-E190...100-E205 X 100-E265...100-E370 -- 100-E265...100-E370 X 100-E400...100-E460 -- 100-E400...100-E460 -- X 100-E580...100-E750 X -- 100-E580...100-E750, 100-E1260 IP20 terminal shield between contactor and 193-E overload relay on an assembled direct-online starter 100-E116...100-E146 100-E190...100-E205 IP20 terminal shield between contactor and 193-E overload relay on an assembled reversing starter 100-E116...100-E146 100-E190...100-E205 (1) Not applicable when using the 100-ETL370B lug kit. Cat. No. 100-ETS146L 100-ETS205L 100-ETS205C 100-ETS370L(1) 100-ETS370C 100-ETS460L 100-ETS460C 100-ETS750L 100-ETS750C 100-ETC146 100-ETC205 100-ETCR146 100-ETCR205 70 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Accessories Power Wiring Kits Description Reversing Power Wiring Kits · Used to connect the main poles of two 3-pole contactors mounted side by side · 1 line-side paralleling and 1 load-side reversing connection · Insulated, solid copper bars For Use With 100-E09...100-E16 100-E26...100-E38 100-E40...100-E65 100-E80, 100-E96 Cat. No. 105-PW16 105-PW38 105-PW65 105-PW96 Reversing Power Wiring Kits 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 105-PW146 105-PW205 (1) 105-PW370 (1) 105-PW460 (2) 100-E580...100-E750 Wye-Delta Power Wiring Kits Delta Contactor (1M/2M) · Used to connect the main poles of the Line, Delta and Star contactors of a star-delta starter. · Connection sets are made up of: Line contactor / delta contactor, line-side 100-E09...100-E16 100-E26...100-E38 100-E40...100-E65 phase-to-phase connection Delta contactor / star contactor, load-side connection in parallel 100-E80, 100-E96 Star contactor: star point line-side Insulated, solid copper bars Delta Contactor (1M/2M) 100-E116...100-E146 100-E190...100-E205 100-E190...100-E205 Wye-Delta Power Wiring Kits 100-E265...100-E370 100-E265...100-E370 100-E400...100-E460 100-E580...100-E750 100-E580...100-E750 Shorting Bars Wye Contactor (1S) 100-E09...100-E16 100-E26...100-E38 100-E40...100-E65 100-E80, 100-E96 Wye Contactor (1S) 100-E116...100-E146 100-E116...100-E146 100-E190...100-E205 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 100-E400...100-E460 100-E580...100-E750 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 100-E580...100-E750 105-PW750 (2) Cat. No. 170-PW16 170-PW38 170-PW65 170-PW96 Cat. No. 170-PW146 170-PW190 170-PW205 170-PW265 170-PW370 170-PW460 170-PW580 170-PW750 170-PWY146 170-PWY205 170-PWY370 170-PWY460 170-PWY750 (1) Kits includes one set of terminal extensions. If 100-ETL* terminal lugs are to be used on line and load side of reversing contactor, and second set of 100-ETX terminal extensions is required. (2) If 100-ETL* terminal lugs are to be used on line and load side of reversing contactor, two sets of 100-ETX terminal extensions are also required. Mounting Plates For direct-on-line starters Description For reversing contactors For reversing starters For Use With 100-E116...100-E146 100-E190...100-E205 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 100-E580...100-E750 100-E116...100-E146 100-E190...100-E205 Cat. No. 100-EMS146 100-EMS205 100-EMR146 100-EMR205 100-EMR370 100-EMR460 100-EMR750 100-EMRS146 100-EMRS205 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 71 100-E/104-E, 100S-E/104S-E Contactors Accessories Connectors Description For connection to 140G or 140MG · Connection between contactors/starters and molded case circuit breakers. · These connection sets are solid copper bars. For Use With Circuit Breaker 140G-H, 140MG-H 140G-I, 140MG-I 140G-J, 140MG-J 140G-J, 140MG-J 140G-K, 140MG-K 140G-M, 140MG-M 140G-K, 140MG-K For Use With Contactor 100-E116...100-E146 100-E116...100-E146 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E750 100-E400...100-E750 Terminal Accessories Description Terminal Enlargements · Enlargement pieces designed to increase the width of the contactor terminal pads in order to allow larger connections to be mounted. Terminal Extensions · Extension pieces designed to extend the main terminals of contactors for combined mounting of contactors and connection sets For Use With Contactor 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 100-E580...100-E750 100-E1260 100-E116...100-E146 100-E190...100-E205 100-E265...100-E370 100-E400...100-E460 100-E580...100-E750 Cat. No. 100-PCE1 100-PCE2 100-PCE3 100-PCE4 100-PCE5 100-PCE6 100-PCE7 Cat. No. 100-ETE146 100-ETE205 100-ETE370 100-ETE460 100-ETE750 100-ETE1260 100-ETX146 100-ETX205 100-ETX370 100-ETX460 100-ETX750 72 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Renewal Parts Coil Modules Description Coil Modules (1) One set of two coils (2) Printed circuit board 100-E/104-E, 100S-E/104S-E Contactors Renewal Parts For Use With 100-E116 100-E146 100-E190, 100-E205 100-E190 100-E205 100-E265, 100-E305, 100-E370 100-E265 100-E305 100-E370 100-E400, 100-E460 100-E580, 100-E750, 100-E1260 100-E860, 100-E1060, 100-E2050 100-E2650 Voltage 24...60V AC/DC 48...130V AC/DC 100...250V AC/DC 250...500V AC/DC 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 24...60V AC/DC 48...130V AC/DC 100...250V AC/DC 250...500V AC/DC 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 24...60V AC/DC 48...130V AC/DC 100...250V AC/DC 250...500V AC/DC 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 24...60V AC/DC 48...130V AC/DC 100...250V AC/DC 250...500V AC/DC 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 24...60V DC w/ PLC Interface 48...130V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 24...60V DC w/ PLC Interface 48...130V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 250...500V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface 100...250V AC/DC w/ PLC Interface Cat. No. TG913 TG914 TG915 TG916 TGE913 TGE914 TG901 TG902 TG903 TG904 TGE903 TGE904 TG905 TG906 TG907 TG908 TGE915 TGE916 TGE907 TGE908 TG909 TG910 TG911 TG912 TGE917 TGE918 TGE919 TGE920 TGE911 TGE912 THE901 THE902 THE903 THE904 TJE901 TJE902 TJE903 TJE904 TKE903 (1) TKE904 (2) TLE903 (1) TLE904 (2) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 73 100-E/104-E, 100S-E/104S-E Contactors Renewal Parts Contact Kits Description Contact Kits (1) Movable contacts only Terminal and Mounting Hardware Kits Arc Chutes Description Terminal and Mounting Hardware Kits (1) Mounting hardware only. For Use With 100-E116 100-E146 100-E190 100-E205 100-E2650 100-E305 100-E370 100-E400 100-E460 100-E580 100-E750 100-E1260 100-E860 100-E1060 100-E2050 100-E2650 (1) 100-E400, 100-E460 100-E580, 100-E750, 100-E1260 100-E860, 1060, 100-E2050 100-E2650 Cat. No. 100-EA116 100-EA146 100-EA190 100-EA205 100-EA265 100-EA305 100-EA370 100-EA400 100-EA460 100-EA580 100-EA750 100-EA1260 100-EA860 100-EA1060 100-EA2050 100-EA2650 100-EC460 100-EC750 100-EC1060 100-EC2650 For Use With 100-E116*L, 100-E146*L 100-E116, 100-E146 100-E190, 100-E205 100-E265, 100-E305, 100-E370 100-E400, 100-E460 100-E580, 100-E750, 100-E1260 100-E860, 100-E1060, 100-E2050 100-E2650 Cat. No. 100-EHS146(1) 100-EHF146 100-EHF205 100-EHF370 100-EHF460 100-EHF750 100-EHF2050 100-EHF2650 74 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Specifications 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 31 - General Specifications Rated Isolation Voltage Ui IEC [V] UL, CSA [V] Rated Impulse Voltage Withstand Uimp [kV] Rated Voltage Ue AC 50/60 Hz [V] DC [V] 100-E, 100S-E, 104-E, 104S-E09...65 100-E, 100S-E, 104S-E80...96, 104-E80...2650 690 1000 600 600 6 8 115, 200, 230, 240, 400, 415, 460 500, 575, 690, 1000 24, 48, 110, 220, 440 Electromagnetic compatibility Insulation Class of the Coil Rated coil frequency Ambient Temperature Storage [°C ( °F)] Operation at rated voltage [°C ( °F)] IEC 60947-1 - Environment A and B(1) Class F per IEC 60947-4-1 AC 50/60 Hz, DC -60...+80 (-76...+176) -40...+70 (-40...+158) -40...+70 (-40...+158) -40...+70 (-40...+158) Max. Altitude of Installation Site [m] Climatic Withstand Resistance to Shock Resistance to Vibration Contactor main contacts Protection Class Contactor coil terminals Auxiliary contacts Functional Safety Data (100S-E116...-E750): Usable for ISO 13849-1 and IEC 62061. Data is based on the B10 value given and: Mission time/Proof test interval of 20 years. 100S-E116...100S-E370 100S-E116...100S-E205 100S-E265...100S-E370 100S-E400...100S-E750 100S-E400...100S-E460 100S-E570...100S-E750 3000 Category B according to IEC 60947-1, Annex Q IEC 60068-2-27 IEC 60068-2-6 IP2X(2) IP00 IP2X (in connected state) IP2X (in connected state) B10: 1.0E+06 operations at 50% max. AC-3 load; failure ratio: 75% failure to open, 25% failure to close B10: 5.0E+06 operations, mechanical only; failure ratio: 50% failure to open, 50% failure to close B10: 2.5E+06 operations, mechanical only; failure ratio: 50% failure to open, 50% failure to close B10: 5.0E+05 operations at 50% max. AC-3 load; failure ratio: 75% failure to open, 25% failure to close B10: 3.0E+06 operations, mechanical only; failure ratio: 50% failure to open, 50% failure to close B10: 7.0E+05 operations, mechanical only; failure ratio: 50% failure to open, 50% failure to close (1) 100-E09...E38 only. (2) 100-E40...E96 meet IP2X when used with 100-ESC... terminal shrouds. Table 32 - Standards Compliance and Certifications Standards Compliance Certifications · IEC/EN 60947-1, Low-voltage switchgear and controlgear · cULus, File No. E41850 / E196120 (contactors, reversing contactors) · IEC/EN 60947-4-1, Low-voltage switchgear and controlgear, Contactors and motor-starters · UL · IEC/EN 60947-5-1, Low-voltage switchgear and controlgear, Control circuit devices and switching · CSA elements · CCC · UL 60947-4-1, Industrial Control Equipment (USA) · EAC · CSA C22.2 No. 60947-4-1 Industrial Control Equipment (Canada). · RCM · Mechanically Linked Contacts: IEC 60947-5-1, Annex L (100/100S-E09...100/100S-E96 with all 100-E* front- and side-mounted N.C. auxiliary contacts) · RINA · KC · Mirror Contacts: IEC 60947-4-1, Annex F (100/100S-E116...100/100S-E750 with all 100-ES* side-mounted N.C. auxiliary contacts) · CE · SUVA · SEMI-F47 (Conditions of use on request) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 75 100-E/104-E, 100S-E/104S-E Contactors Specifications 9...96 A Contactor Specifications Table 33 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 AC-1 Active Power Load (50/60Hz); Ambient temperature 40 °C (104 °F) Rated Operational 690V [A] 25 28 30 45 50 50 70 100 105 125 130 Current, Ie 1000V [A] -- -- -- -- -- -- -- -- -- 35 40 230 [kW] 10 11 12 18 20 20 28 40 42 50 52 240 [kW] 10 12 12 19 21 21 29 42 44 52 54 400 [kW] 17 19 21 31 35 35 48 69 73 87 90 Rated Operational Power, Pe 415 [kW] 18 20 22 32 36 36 50 72 75 90 93 500 [kW] 22 24 26 39 43 43 61 87 91 108 113 690 [kW] 30 33 36 54 60 60 84 120 125 149 155 1000 [kW] -- -- -- -- -- -- -- -- -- 61 69 Ambient temperature 60 °C (140 °F) Rated Operational 690V [A] 25 28 30 40 42 42 60 80 90 100 105 Current, Ie 1000V [A] -- -- -- -- -- -- -- -- -- 35 40 230 [kW] 10 11 12 16 17 17 24 32 36 40 42 240 [kW] 10 12 12 17 17 17 25 33 37 42 44 400 [kW] 17 19 21 28 29 29 42 55 62 69 73 Rated Operational Power, Pe 415 [kW] 18 20 22 29 30 30 43 58 65 72 75 500 [kW] 22 24 26 35 36 36 52 69 78 87 91 690 [kW] 30 33 36 48 50 50 72 96 108 120 125 1000 [kW] -- -- -- -- -- -- -- -- -- 61 69 Ambient temperature 70 °C (158 °F) Rated Operational 690V [A] 22 24 26 32 37 37 50 70 80 85 90 Current, Ie 1000V [A] -- -- -- -- -- -- -- -- -- 35 40 230 [kW] 9 10 10 13 15 15 20 28 32 34 36 240 [kW] 9 10 11 13 15 15 21 29 33 35 37 400 [kW] 15 17 18 22 26 26 35 48 55 59 62 Rated Operational Power, Pe 415 [kW] 16 17 19 23 27 27 36 50 58 61 65 500 [kW] 19 21 23 28 32 32 43 61 69 74 78 690 [kW] 26 29 31 38 44 44 60 84 96 102 108 1000 [kW] -- -- -- -- -- -- -- -- -- 61 69 With Conductor sizes [mm2] 4 6 6 10 10 10 25 35 35 50 50 76 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 34 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 Switching of 3-phase Motors; (50Hz) Ambient temperature 60 °C (140 °F) AC-2, AC-3 220-240V [A] 9 12 18 26 33 40 40 53 65 80 96 380-400V [A] 9 12 18 26 32 38 40 53 65 80 96 415V [A] 9 12 18 26 32 38 40 53 65 80 96 Rated Operational Current, Ie 440V [A] 9 12 18 26 32 38 40 53 65 80 96 500V [A] 9.5 12.5 15 23 28 33 40 45 55 65 80 690V [A] 7 9 10.5 17 21 24 25 35 39 49 57 1000V [A] -- -- -- -- -- -- -- -- -- 25 30 220-240V [kW] 2.2 3 4 6.5 9 11 11 15 18.5 22 25 380-400V [kW] 4.0 5.5 7.5 11 15 18.5 18.5 22 30 37 45 415V [kW] 4.0 5.5 9 11 15 18.5 22 30 37 45 55 Rated Operational Power, Pe 440V [kW] 4.0 5.5 9 15 18.5 22.0 22 30 37 45 55 500V [kW] 5.5 7.5 9 15 18.5 22.0 22 30 37 45 55 690V [kW] 5.5 7.5 9 15 18.5 22.0 22 30 37 45 55 1000V [kW] -- -- -- -- -- -- -- -- -- 35 40 Load Carrying Capacity per UL/CSA General Purpose Current (enclosed) 600V [A] 13.8 16.0 20 24 24.0 24.0 34 34 56 80 80 120V [A] 13.8 16.0 20 24 24.0 24.0 34 34 56 80 80 Rated Operational 240V [A] 10.0 12.0 17 17 28.0 28.0 40 50 68 68 88 Current and Power (enclosed), 1-Phase 120V [Hp] 0.75 1 1.5 2 2 2 3 3 5 7.5 7.5 240V [Hp] 1.5 2 3 3 5 5 7.5 10 15 15 20 200-208 [A] 7.8 11 17.5 25.3 32.2 32.2 32.2 48.3 62.1 78.2 92 220-240 [A] 6.8 9.6 15.2 22.0 28 28 42 54 68 80 80 440-480 [A] 7.6 11 14 21.0 27 34 40 52 65 77 77 Rated Operational 550-600 [A] 9 11 17 22.0 27 32 41 52 62 77 77 Current and Power (enclosed), 3-Phase 200-208 [Hp] 2 3 5 7.5 10 10 10 15 20 25 30 220-240 [Hp] 2 3 5 7.5 10 10 15 20 25 30 30 440-480 [Hp] 5 7.5 10 15.0 20 25 30 40 50 60 60 550-600 [Hp] 7.5 10 15 20.0 25 30 40 50 60 75 75 Rated Operational 125V DC [A] 9.5 13.2 17 25.0 25 25 40 58 76 76 110 Current and Power 250V DC [A] 8.5 8.5 12.2 12.2 20 29 38 55 72 89 106 (enclosed), with 3 125V DC [Hp] 1 1.5 2 poles in series 250V DC [Hp] 2 3 3 3 3 3 5 7.5 10 10 15 5 7.5 7.5 10 15 20 25 30 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 77 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 35 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 Wye-Delta (60 Hz) 200V [Hp] 3 5 7.5 10 15 15 15 25 30 40 50 Rated Operational 230V [Hp] 3 5 7.5 10 15 15 25 30 40 50 50 Power, Pe 460V [Hp] 7.5 10 15 25 30 40 50 60 75 100 100 575V [Hp] 10 15 25 30 40 50 60 75 100 125 125 Star-Delta Starting (50 Hz) 230V [A] 9 12 18 26 33 40 40 53 65 80 96 240V [A] 9 12 18 26 32 38 40 53 65 80 96 400V [A] 9 12 18 26 32 38 40 53 65 80 96 Rated Operational Current, Ie 415V [A] 9 12 18 26 32 38 40 53 65 80 96 500V [A] 9.5 12.5 15 23 28 33 40 45 55 65 80 690V [A] 7 9 10.5 17 21 24 25 35 39 49 57 1000V [A] -- -- -- -- -- -- -- -- -- 25 30 230V [kW] 4 5.5 7.5 11 15 18.5 18.5 22 30 37 45 240V [kW] 4 5.5 7.5 11 15 18.5 18.5 22 30 37 45 400V [kW] 7.5 7.5 15 22 30 30 37 45 55 75 90 Rated Operational Power, Pe 415V [kW] 7.5 7.5 15 22 30 37 37 45 55 75 90 500V [kW] 7.5 11 15 22 30 37 45 45 55 75 90 690V [kW] 7.5 11 15 22 30 37 37 55 55 75 90 1000V [kW] -- -- -- -- -- -- -- -- -- -- -- Table 36 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 UL/CSA Elevator Duty Rated Operational Current and Power, 500,000 electrical operations, 1-Phase 115V AC 230V AC 115V AC 230V AC [A] 5.8 7.20 -- 20 24 24 34 34 34 56 56 [A] 2.20 3.20 -- 9.6 10 15.2 15.2 22 28 28 28 [Hp] 0.25 0.33 -- 1.5 2 2 3 3 3 5 5 [Hp] 0.50 0.75 -- 3 3 5 5 7.5 10 10 10 200V AC [A] 4.60 7.50 -- 16.7 24.2 24.2 30.8 30.8 46.2 46.2 46.2 230V AC [A] 4.20 6.80 -- 15.2 22 22 28 28 42 42 42 Rated Operational Current and Power, 500,000 electrical operations 3-Phase 460V AC 575V AC 200V AC 230V AC [A] 4.80 7.60 -- 21.0 27 27 34 40 52 52 52 [A] 3.90 6.10 -- 17 22 22 32 41 41 52 52 [Hp] 1 2 -- 5 7.5 7.5 10 10 15 15 15 [Hp] 1 2 -- 5 8 10 10 15 20 20 20 460V AC [Hp] 3 5 -- 15 20 20 25 30 40 40 40 575V AC [Hp] 3 5 -- 15 20 20 30 40 40 50 50 UL/CSA HVAC Applications Definite purpose rating (3-phase) FLA 600V [A] 20 25 30 45 50 50 60 80 90 105 115 200-208V AC [A] 120 150 180 270 300 300 360 480 540 630 690 220-240V AC [A] 120 150 180 270 300 300 360 480 540 630 690 LRA 440-480V AC [A] 120 150 180 270 300 300 360 480 540 630 690 550-600V AC [A] 80 100 120 180 200 200 240 320 360 420 460 78 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 37 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 Switching of Power Transformers, AC-6a (50 Hz) Inrush Current Rated transformer current = n 230V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 240V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 400V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 n=30 415V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 500V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 690V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 230V [kVA] 5 5 7 11 13 16 17 21 23 25 28 240V [kVA] 5 6 7 11 14 17 17 21 24 26 29 Apparent Power 400V [kVA] 8 9 12 18 23 28 29 36 40 44 48 415V [kVA] 8 10 12 19 24 29 30 37 42 45 50 500V [kVA] 10 12 14 23 29 35 36 45 50 55 61 690V [kVA] 14 16 20 32 40 48 50 62 70 76 84 n=20 690V [A] 17.5 20 25 40 50 60 62.5 77.5 87.5 95 105 n=15 690V [A] 23.3 26.7 33.3 53.3 66.7 80.0 83.3 103 117 127 140 60 Hz Peak Inrush/peak rated transformer current n=30 600V [A] 11.7 13.3 16.7 26.7 33.3 40.0 41.7 51.7 58.3 63.3 70.0 200V [kVA] 4 5 6 9 12 14 14 18 20 22 24 208V [kVA] 4 5 6 10 12 14 15 19 21 23 25 Apparent Power 240V [kVA] 5 6 7 11 14 17 17 21 24 26 29 480V [kVA] 10 11 14 22 28 33 35 43 48 53 58 600V [kVA] 12 14 17 28 35 42 43 54 61 66 73 n=20 600V [A] 17.5 20.0 25.0 40.0 50.0 60.0 62.5 77.5 87.5 95.0 105 200V [kVA] 6 7 9 14 17 21 22 27 30 33 36 208V [kVA] 6 7 9 14 18 22 22 28 31 34 38 Apparent Power 240V [kVA] 7 8 10 17 21 25 26 32 36 39 44 480V [kVA] 15 17 21 33 42 50 52 64 73 79 87 600V [kVA] 18 21 26 42 52 62 65 80 91 99 109 n=15 600V [A] 23.3 26.7 33.3 53.3 66.7 80.0 83.3 103 117 127 140 200V [kVA] 8 9 12 18 23 28 29 36 40 44 48 208V [kVA] 8 10 12 19 24 29 30 37 42 46 50 Apparent Power 240V [kVA] 10 11 14 22 28 33 35 43 48 53 58 480V [kVA] 19 22 28 44 55 66 69 86 97 105 116 600V [kVA] 24 28 35 55 69 83 87 107 121 131 145 Switching of Lighting Loads (UL/CSA) 1-phase per pole 347V [A] 20 25 30 45 50 50 65 80 90 105 115 Tungsten lamps 3-phase (break all lines) 600V [A] 20 25 30 45 50 50 65 80 90 105 115 Electrical 1-phase per pole 347V [A] 20 25 30 45 50 50 65 80 90 105 115 discharge 3-phase (break all lamps (ballast) lines) 600V [A] 20 25 30 45 50 50 65 80 90 105 115 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 79 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 38 - Main Circuits 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 3- or 4-Pole 3-Pole 4-Pole 3-Pole 3-Pole 4-Pole 3-Pole 3-Pole 3-Pole 3-Pole 3-Pole Switching of DC Loads--Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C 72V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 1 pole 110V [A] 10 15 20 -- -- -- -- -- -- -- -- -- -- 220V [A] -- -- -- -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 2 poles in series 110V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 220V [A] 10 15 20 -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 3 poles in series 110V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 220V [A] 25 27 30 45 45 50 50 55 70 100 105 125 130 72V [A] 25 -- 30 -- 45 -- -- 55 -- -- -- -- -- 4 poles in series 110V [A] 25 -- 30 -- 45 -- -- 55 -- -- -- -- -- 220V [A] 25 -- 30 -- 45 -- -- 55 -- -- -- -- -- 440V [A] 10 -- 20 -- -- -- -- -- -- -- -- -- -- Shunt-wound Motors--Starting, reverse current breaking, reversing, stepping: DC-3 at 60 °C 72V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 1 pole 110V [A] 6 7 8 -- -- -- -- -- -- -- -- -- -- 220V [A] -- -- -- -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 2 poles in series 110V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 220V [A] 6 7 8 -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 3 poles in series 110V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 220V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 72V [A] 25 -- 30 -- -- -- -- -- -- -- -- -- -- 4 poles in series 110V [A] 25 -- 30 -- -- -- -- -- -- -- -- -- -- 220V [A] 25 -- 30 -- -- -- -- -- -- -- -- -- -- 440V [A] 6 -- 8 -- -- -- -- -- -- -- -- -- -- Series-wound Motors--Starting, reverse current breaking, reversing, stepping: DC-5 at 60 °C 72V [A] 9 12 16 20 -- 25 25 -- 70 100 105 125 130 1 pole 110V [A] 4 4 4 -- -- -- -- -- -- -- -- -- -- 220V [A] -- -- -- -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 2 poles in series 110V [A] 10 15 20 45 -- 50 50 -- 70 100 105 125 130 220V [A] 4 4 4 -- -- -- -- -- -- -- -- -- -- 72V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 3 poles in series 110V [A] 25 27 30 45 -- 50 50 -- 70 100 105 125 130 220V [A] 9 12 16 20 -- 25 25 -- 70 100 105 125 130 72V [A] 25 -- 30 -- -- -- -- -- -- -- -- -- -- 4 poles in series 110V [A] 25 -- 30 -- -- -- -- -- -- -- -- -- -- 220V [A] 10 -- 20 -- -- -- -- -- -- -- -- -- -- 440V [A] 4 -- 4 -- -- -- -- -- -- -- -- -- -- Short Time Withstand ICW 40 °C 1 s [A] 300 300 300 700 700 700 1000 1000 1000 1200 1200 10 s [A] 150 150 150 350 350 350 600 600 600 780 780 3- Pole 30 s [A] 80 80 80 225 225 225 350 350 350 450 450 1 min [A] 60 60 60 150 150 150 250 250 250 300 300 15 min [A] 35 35 35 50 50 50 110 110 110 140 140 80 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 38 - Main Circuits (Continued) 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 3- or 4-Pole 3-Pole 4-Pole 3-Pole 3-Pole 4-Pole 3-Pole 3-Pole 3-Pole 3-Pole 3-Pole Resistance and Power Dissipation Main current circuit resistance [m] 0.41 0.46 0.36 0.30 0.29 0.30 0.21 0.20 0.21 0.16 0.16 Power dissipation per pole at Ie AC-1, 400V [W] 0.8 1 1.2 1.8 2.4 2.4 3 6.3 7 7.6 8.2 Power dissipation per pole at Ie AC-3, 400V [W] 0.1 0.2 0.35 0.6 0.9 1.3 1 1.7 2.7 3 4.5 Total Power dissipation at: Ie AC-3, 400V; AC/DC control (120-250V) [W] 2.3 2.6 3.05 3.8 4.7 5.9 5 7.1 10.1 11 15.5 AC-1 ops/hr 600 cycles/h Maximum Switching Frequency AC-3 ops/hr AC-2, AC-4 ops/hr 300 cycles/h 1200 cycles/h 150 cycles/h Weight: AC/DC (Electronic) [kg (lbs.)] 0.43 (0.95) 0.43 (0.95) 0.43 (0.95) 0.48 (1.06) 0.48 (1.06) 0.48 (1.06) 0.99 (2.18) 0.99 (2.18) 0.98 (2.16) 1.23 (2.7) 1.25 (2.76) Table 39 - Short-circuit Current Ratings 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) Per IEC 60947-4-1 100 kA Available Fault Current DIN FUSES- gG Type "2" (400V) [A] 32 32 35 62 80 80 100 125 125 160 160 60 kA Available Fault Current Type "2" (690V) [A] 6 10 16 32 32 40 40 63 80 80 100 70 kA Available Fault Current MCCB Type "2" (400V) [A] 28 28 28 56 56 240 520 800 800 880 880 Short Circuit Current Rating (Max. Fuse or Circuit Breaker Rating) Per UL 60947 and CSA 22.2 No. 14 (contactor and fuses or circuit breaker only) 5 kA Available Fault Current UL Class RK5 Fuses Type 1 Combination (600V) [A] 30 30 60 60 100 100 150 150 -- -- -- 10 kA Available Fault Current UL Class RK5 Fuses Type 1 Combination (600V) [A] -- -- -- -- -- -- -- -- 150 200 200 UL Class J and CSA HRCI-J Fuses 100 kA Available Fault Current Type 1 Combination (600V) [A] 30 30 60 60 100 100 150 150 150 200 200 5 kA Available Fault Current Type 1 Combination (480V) [A] 60 60 60 100 125 125 250 250 -- -- -- 10 kA Available Fault Current Type 1 Combination (480V) [A] 60 60 60 -- -- -- -- -- 250 250 250 65 kA Available Fault Current Type 1 Combination (480V) [A] -- -- -- 100 -- -- 250 250 250 250 250 100 kA Available Fault Current Type 1 Combination (480V) [A] -- -- -- -- 125 125 -- -- -- 100 100 UL Inverse-Time Circuit Breaker 5 kA Available Fault Current Type 1 Combination (600V) [A] 60 60 -- -- 125 125 250 250 -- -- -- 10 kA Available Fault Current Type 1 Combination (600V) [A] -- -- 60 -- -- -- 250 250 250 250 250 25 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- 100 -- -- -- -- -- -- -- 35 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- -- 125 125 -- -- 250 -- -- 50 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- -- -- -- -- -- -- 250 250 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 81 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 40 - Coil Data 100/104-E, 100S/104S-E 9 Operating Limits 50/60Hz pick-up dropout [x Us] [x Us] DC Control pick-up dropout [x Us] [x Us] Standard Coil pick-up 24-60V AC, 20-60V DC (KJ) hold-in [VA]/[W] [VA]/[W] 48...130V AC/DC (KY) pick-up hold-in [VA]/[W] [VA]/[W] 100...250V AC/DC (KD) pick-up hold-in [VA]/[W] [VA]/[W] 250...500V AC/DC (KN) pick-up hold-in [VA]/[W] [VA]/[W] Operating Times closing delay [ms] opening delay [ms] Energy-efficient Coil 12-20V DC (EQ) pick-up [W] hold-in [W] pick-up 24-60V AC, 20-60V DC (EJ) hold-in [VA]/[W] [VA]/[W] Operating Times closing delay [ms] opening delay [ms] High Energy Efficient Coil 24V DC (QJ) pick-up [W] hold-in [W] Operating Times closing delay [ms] opening delay [ms] 12 16 26 30 38 40 52 65 80 96 0.85...1.1 0.60 0.80...1.1 0.60 50/50 2.2/2 50/50 2.2/2 50/50 2.2/2 50/50 2.2/2 40...95 11...95 25/25 4/2 25/25 4/2 25/25 4/2 25/25 4/2 42...100 17...100 40/40 4/2 40/40 4/2 40/40 4/2 40/40 4/2 12...16 1.7 16/12...16 1.7/1.7 40...95 11...95 ---- -- -- -- ---- -- -- -- ---- -- -- -- ---- -- -- -- ---- -- -- -- ---- -- -- -- 6 1.7 27...53 17...29 ---- -- -- -- ---- -- -- -- ---- -- -- -- ---- -- -- -- 82 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications 116...2650 A Contactors Table 41 - Main Circuits 100/104-E, 100S-E 116 146 AC-1 Active Power Load (50/60 Hz); Ambient temperature 40 °C (104 °F) Rated Operational Current, Ie 690V 1000V [A] 160 225 [A] 160 225 230V [kW] 64 90 240V [kW] 67 94 Rated Operational Power, Pe 400V [kW] 111 156 415V [kW] 115 162 500V [kW] 139 195 690V [kW] 191 269 1000V [kW] 277 390 Ambient temperature 60 °C (140 °F) Rated Operational Current, Ie 690V 1000V [A] 145 200 [A] 145 200 230V [kW] 58 80 240V [kW] 60 83 Rated Operational Power, Pe 400V [kW] 100 139 415V [kW] 104 144 500V [kW] 126 173 690V [kW] 173 239 1000V [kW] 251 346 Ambient temperature 70 °C (158 °F) Rated Operational Current, Ie 690V 1000V [A] 130 175 [A] 130 175 230V [kW] 52 70 240V [kW] 54 73 Rated Operational Power, Pe 400V [kW] 90 121 415V [kW] 93 126 500V [kW] 113 152 690V [kW] 155 209 1000V [kW] 225 303 With conductor sizes [mm2] 70 95 (1) For currents above 275 A, use terminal extensions. (2) For currents above 450 A, use terminal extensions. (3) Maximum connection bar width 50 mm. (4) Maximum connection bar width 100 mm. 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 275 350 400 500 600 600 700 800 1050 1350 1650 1260 2050 2650 250 275 350 375 400 600 700 800 1050 1350 1650 1260 2050 2650 110 139 159 199 239 239 279 319 418 538 657 502 817 1056 114 145 166 208 249 249 291 333 436 561 686 524 852 1102 191 242 277 346 416 416 485 554 727 935 1143 873 1420 1836 198 252 288 359 431 431 503 575 755 970 1186 906 1474 1905 238 303 346 433 520 520 606 693 909 1169 1429 1091 1775 2295 329 418 478 598 717 717 837 956 1255 1613 1972 1506 2450 3167 433 476 606 650 693 1039 1212 1386 1819 2338 2858 2182 3551 4590 250 300 350 400 500 500 600 700 875 1150 1450 1040 1750 2350 225 250 300 325 350 500 600 700 875 1150 1450 1040 1750 2350 100 120 139 159 199 199 239 279 349 458 578 414 697 936 104 125 145 166 208 208 249 291 364 478 603 432 727 977 173 208 242 277 346 346 416 485 606 797 1005 721 1212 1628 180 216 252 288 359 359 431 503 629 827 1042 748 1258 1689 217 260 303 346 433 433 520 606 758 996 1256 901 1516 2035 299 359 418 478 598 598 717 837 1046 1374 1733 1243 2091 2809 390 433 520 563 606 866 1039 1212 1516 1992 2511 1801 3031 4070 200 240 290 325 400 400 480 580 720 1000 1270 875 1500 2120 185 200 240 260 290 400 480 580 720 1000 1270 875 1500 2120 80 96 116 129 159 159 191 231 287 398 506 349 598 845 83 100 121 135 166 166 200 241 299 416 528 364 624 881 139 166 201 225 277 277 333 402 499 693 880 606 1039 1469 144 173 208 234 288 288 345 417 518 719 913 629 1078 1524 173 208 251 281 346 346 416 502 624 866 1100 758 1299 1836 239 287 347 388 478 478 574 693 860 1195 1518 1046 1793 2534 320 346 416 450 502 693 831 1005 1247 1732 2200 1516 2598 3672 150 240 (1) 240 300 (2) 2x185 (2) 2x185 2x240 2x240 800 (3) 1000 (4) 1500 (4) 1000 (3) 2000 (4) 3000 (4) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 83 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 42 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Switching of 3-phase Motors; (50 Hz) Ambient temperature 60 °C (140 °F) AC-2, AC-3 220-240V [A] 116 146 190 205 265 305 370 400 460 580 750 860 1060 -- -- -- 380-400V [A] 116 146 190 205 265 305 370 400 460 580 750 860 1060 -- -- -- Rated Operational Current, Ie 415V [A] 116 146 190 205 265 305 370 400 460 580 750 860 1060 -- -- -- 440V [A] 116 146 190 205 265 305 370 400 460 580 750 860 1060 -- -- -- 500V [A] 110 130 156 185 250 290 350 400 460 580 750 860 970 -- -- -- 690V [A] 66 93 135 165 250 290 315 350 400 500 650 800 970 -- -- -- 1000V [A] 46 60 85 100 113 131 141 155 200 250 300 375 400 -- -- -- 220-240V [kW] 37 45 55 55 75 90 110 110 132 160 220 250 315 -- -- -- 380-400V [kW] 55 75 90 110 132 160 200 200 250 315 400 475 560 -- -- -- Rated Operational Power, Pe 415V [kW] 55 75 90 110 132 160 200 220 250 355 425 500 630 -- -- -- 440V [kW] 75 90 110 132 160 160 200 220 250 355 450 560 710 -- -- -- 500V [kW] 75 90 110 132 160 200 250 250 315 400 530 630 710 -- -- -- 690V [kW] 63 90 132 160 200 250 315 315 355 500 600 800 1000 -- -- -- 1000V [kW] 55 75 110 132 160 185 200 220 280 355 400 555 600 -- -- -- Load Carrying Capacity per UL/CSA General-purpose Current (enclosed) [A] 160 200 250 300 350 400 520 550 650 750 900 1350 1650 1210 2100 2700 200V [A] 92 120 150 177 221 285 359 359 414 552 692 954 1030 -- -- -- 230V [A] 104 130 154 192 248 312 360 360 480 604 722 954 1030 -- -- -- Rated Operational Current and Power (enclosed), 3-Phase 460V [A] 96 124 156 180 240 302 361 414 477 590 722 954 1030 -- -- -- 575V [A] 99 125 144 192 242 289 336 382 472 578 672 944 1050 -- -- -- 200V [Hp] 30 40 50 60 75 100 125 125 150 200 250 -- -- -- -- -- 230V [Hp] 40 50 60 75 100 125 150 150 200 250 300 400 450 -- -- -- 460V [Hp] 75 100 125 150 200 250 300 350 400 500 600 800 900 -- -- -- 575V [Hp] 100 125 150 200 250 300 350 400 500 600 700 1000 1150 -- -- -- Rated Current (enclosed), with 3 poles in series 260V DC 300V DC 340V DC 600V DC [A] 160 200 -- -- -- -- -- -- -- -- -- -- -- -- -- -- [A] -- -- 230 250 -- -- -- -- -- -- -- -- -- -- -- -- [A] -- -- -- -- 350 400 520 -- -- -- -- -- -- -- -- -- [A] -- -- -- -- -- -- -- 550 650 750 900 1050 1350 1210 1900 -- 84 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 43 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Switching of 3-phase Motors, (50Hz); Ambient temperature 60°C, AC-4 230V [A] 84 103 128 156 195 230 280 307 377 -- -- -- -- -- -- -- 240V [A] 84 103 128 156 195 230 280 307 377 -- -- -- -- -- -- -- 400V Rated Operational Current, Ie 415V 500V [A] 84 103 128 156 195 230 280 307 377 -- -- -- -- -- -- -- [A] 84 103 128 156 195 230 280 307 377 -- -- -- -- -- -- -- [A] 84 103 128 156 195 230 280 307 377 -- -- -- -- -- -- -- 690V [A] 66 80 93 104 153 162 188 334 350 -- -- -- -- -- -- -- 1000V [A] 40 48 72 85 90 95 100 141 155 -- -- -- -- -- -- -- 230V [kW] 25 32 40 50 55 75 90 90 110 -- -- -- -- -- -- -- 240V [kW] 25 32 40 50 63 75 90 100 125 -- -- -- -- -- -- -- 400V [kW] 45 55 63 80 110 132 160 160 200 -- -- -- -- -- -- -- Rated Operational Power, Pe 415V [kW] 45 55 63 90 110 132 160 160 220 -- -- -- -- -- -- -- 500V [kW] 55 63 90 110 132 160 200 220 250 -- -- -- -- -- -- -- 690V [kW] 63 75 90 100 150 160 185 315 335 -- -- -- -- -- -- -- 1000V [kW] 55 63 100 110 125 132 132 200 220 -- -- -- -- -- -- -- AC-4 at approximately 200,000 operations 230V [A] 38 38 49 55 73 89 100 118 135 -- -- -- -- -- -- -- 240V [A] 38 38 49 55 73 89 100 118 135 -- -- -- -- -- -- -- Rated Operational 400/415V [A] 38 38 49 55 73 89 100 118 135 -- -- -- -- -- -- -- Current, Ie 500V [A] 33 33 37 44 53 59 68 78 89 -- -- -- -- -- -- -- 690V [A] 33 33 37 44 53 59 68 78 89 -- -- -- -- -- -- -- 1000V [A] -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 230V [kW] 11 11 13 15 22 25 30 37 40 -- -- -- -- -- -- -- 240V [kW] 11 11 15 15 22 25 32 37 45 -- -- -- -- -- -- -- 400V [kW] 20 20 25 30 40 50 55 63 75 -- -- -- -- -- -- -- Rated Operational Power, Pe 415V [kW] 20 20 25 30 40 50 55 63 75 -- -- -- -- -- -- -- 500V [kW] 22 22 25 30 37 40 45 55 63 -- -- -- -- -- -- -- 690V [kW] 30 30 32 40 50 55 63 75 80 -- -- -- -- -- -- -- 1000V [kW] -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max. switching frequency Ops/h 150 150 150 150 150 150 150 60 60 -- -- -- -- -- -- -- Wye-Delta (60 Hz) 200V [Hp] 50 60 75 100 125 150 200 200 250 -- -- -- -- -- -- -- Rated Operational 230V [Hp] 60 75 100 125 150 200 250 250 350 450 500 -- -- -- -- -- Power, Pe 460V [Hp] 125 150 200 250 350 450 500 500 600 800 -- -- -- -- -- -- 575V [Hp] 150 200 250 300 450 500 600 600 700 1000 -- -- -- -- -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 85 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 44 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 UL/CSA Elevator Duty 200V [A] 54 54 77 99 125 149 156 -- -- -- -- -- -- -- -- -- Rated Operational Current, Ie 230V [A] 54 54 77 99 125 149 156 -- -- -- -- -- -- -- -- -- 460V [A] 54 54 77 99 125 149 156 -- -- -- -- -- -- -- -- -- 575V [A] 54 54 77 99 125 149 156 -- -- -- -- -- -- -- -- -- 200V [Hp] 15 15 20 30 40 40 50 -- -- -- -- -- -- -- -- -- Rated Operational Power, Pe 230V [Hp] 20 20 25 30 40 50 60 -- -- -- -- -- -- -- -- -- 460V [Hp] 40 40 60 75 100 100 125 -- -- -- -- -- -- -- -- -- 575V [Hp] 50 50 75 100 125 150 150 -- -- -- -- -- -- -- -- -- UL/CSA HVAC Applications Definite purpose rating (3-phase) FLA 600V [A] 116 160 200 250 300 350 520 -- -- -- -- -- -- -- -- -- 230V [A] 700 960 1200 1500 1800 2100 3120 -- -- -- -- -- -- -- -- -- LRA 460V [A] 580 800 1000 1250 1500 1750 2600 -- -- -- -- -- -- -- -- -- 575V [A] 470 640 800 1000 1200 1400 2080 -- -- -- -- -- -- -- -- -- AC resistance heating 600V [A] 160 200 250 300 400 450 520 -- -- -- -- -- -- -- -- -- Star-Delta Starting (50 Hz) 230V [A] 200 252 329 355 458 528 640 692 796 1004 1299 1489 1835 -- -- -- 240V [A] 200 252 329 355 458 528 640 692 796 1004 1299 1489 1835 -- -- -- Rated Operational Current, Ie 400V [A] 200 252 329 355 458 528 640 692 796 1004 1299 1489 1835 -- -- -- 415V [A] 200 252 329 355 458 528 640 692 796 1004 1299 1489 1835 -- -- -- 500V [A] 190 225 233 285 433 502 545 692 796 1004 1299 1385 1680 -- -- -- 690V [A] 112 161 233 285 433 502 545 606 692 866 1125 1385 1680 -- -- -- 1000V [A] -- 103 147 173 173 173 173 268 346 433 519 -- -- -- -- -- 230V (1) [kW] 55 75 90 110 132 160 200 200 250 315 400 500 560 -- -- -- 240V (1) [kW] 55 75 110 110 132 160 200 200 250 315 400 500 630 -- -- -- 400V (1) [kW] 110 132 160 200 250 250 355 400 400 560 710 800 1000 -- -- -- Rated Operational Power, Pe 415V (1) [kW] 110 132 160 200 250 315 355 400 400 560 800 900 1100 -- ---- 500V (1) [kW] 132 160 160 200 315 355 355 500 500 710 800 1000 1300 -- -- -- 690V (1) [kW] 90 132 200 250 400 500 500 560 710 800 1100 1400 1700 -- -- -- 1000V (1) [kW] -- 132 200 250 250 250 250 355 500 630 710 -- -- -- -- -- (1) Power ratings at 50 Hz: Preferred values according to IEC 60947-4-1 86 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 45 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Switching of Power Transformers, AC-6a (50 Hz) Inrush Current Rated transformer current = n 230V [A] 70 79 111 115 143 143 165 200 252 263 286 430 524 362 -- -- 240V [A] 70 79 111 115 143 143 165 200 252 263 286 430 524 362 -- -- 400V [A] 70 79 111 115 143 143 165 200 252 263 286 430 524 362 -- -- n = 30 415V [A] 70 79 111 115 143 143 165 200 252 263 286 430 524 362 -- -- 500V [A] 70 79 111 115 143 143 165 200 252 263 286 -- -- 362 -- -- 690V [A] 70 79 111 115 143 143 165 200 252 263 286 -- -- 362 -- -- 1000V [A] -- -- -- -- -- -- -- -- -- -- -- -- -- ---- 230V [kVA] 28 31 44 46 57 57 66 80 100 105 114 171 209 144 -- -- 240V [kVA] 29 33 46 48 59 59 69 83 105 109 119 179 218 150 -- -- 400V [kVA] 48 55 77 80 99 99 114 139 175 182 198 298 363 251 -- -- Apparent Power 415V [kVA] 50 56 79 82 102 102 117 142 179 187 203 305 372 257 -- -- 500V [kVA] 61 68 96 100 124 124 143 173 218 228 248 -- -- 314 -- -- 690V [kVA] 84 94 133 137 171 171 197 239 301 314 342 -- -- 433 -- -- 1000V [kVA] -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- n = 20 690V [A] 105 119 167 173 215 215 248 300 378 395 429 -- -- 543 -- -- n = 15 690V [A] 140 158 222 230 286 286 330 400 504 526 572 -- -- 724 -- -- 60 Hz Peak Inrush/peak rated transformer current n = 30 660V [A] 70 79 111 115 143 143 165 200 252 263 286 430 524 362 -- -- 200V [kVA] 24 27 38 40 50 50 57 69 87 91 99 149 182 125 -- -- 208V [kVA] 25 28 40 41 52 52 59 72 91 95 103 155 189 130 -- -- Apparent Power 240V [kVA] 29 33 46 48 59 59 69 83 105 109 119 179 218 150 -- -- 480V [kVA] 58 66 92 96 119 119 137 166 210 219 238 357 436 301 -- -- 600V [kVA] 73 82 115 120 149 149 171 208 262 273 297 447 545 376 -- -- 660V [kVA] 80 90 127 131 163 163 189 229 288 301 327 492 599 414 -- -- n = 20 660V [A] 105 119 167 173 215 215 248 300 378 395 429 645 786 543 -- -- 200V [kVA] 36 41 58 60 74 74 86 104 131 137 149 223 272 188 -- -- 208V [kVA] 38 43 60 62 77 77 89 108 136 142 155 232 283 196 -- -- Apparent Power 240V [kVA] 44 49 69 72 89 89 103 125 157 164 178 268 327 226 -- -- 480V [kVA] 87 99 139 144 179 179 206 249 314 328 357 536 653 451 -- -- 600V [kVA] 109 124 174 180 223 223 258 312 393 410 446 670 817 564 -- -- 660V [kVA] 120 136 191 198 246 246 284 343 432 452 490 737 899 621 -- -- n = 15 660V [A] 140 158 222 230 286 286 330 400 504 526 572 860 1048 724 -- -- 200V [kVA] 48 55 77 80 99 99 114 139 175 182 198 298 363 251 -- -- 208V [kVA] 50 57 80 83 103 103 119 144 182 190 206 310 378 261 -- -- Apparent Power 240V [kVA] 58 66 92 96 119 119 137 166 210 219 238 357 436 301 -- -- 480V [kVA] 116 131 185 191 238 238 274 333 419 437 476 715 871 602 -- -- 600V [kVA] 145 164 231 239 297 297 343 416 524 547 594 894 1089 752 -- -- 660V [kVA] 160 181 254 263 327 327 377 457 576 601 654 983 1198 828 -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 87 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 46 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Switching of 3-phase Capacitors, AC-6b (50 Hz) 230V [kVAR] 40 50 60 75 85 100 110 120 140 170 220 250 300 -- -- -- 240V [kVAR] 40 50 60 75 85 100 110 120 140 170 220 250 300 -- -- -- Single capacitor 40 °C 400V [kVAR] 75 90 110 130 145 165 200 210 240 285 400 450 500 -- -- -- 415V [kVAR] 75 90 110 130 145 165 200 210 240 285 400 450 500 -- -- -- 500V [kVAR] 83 110 140 160 180 210 240 260 325 350 490 550 600 -- -- -- 690V [kVAR] 80 110 135 170 200 240 280 300 325 440 600 650 800 -- -- -- 1000V [kVAR] -- 100 140 150 155 160 170 250 300 350 450 -- -- -- -- -- 230V [kVAR] 40 50 60 75 85 100 110 120 140 170 220 250 300 -- -- -- 240V [kVAR] 40 50 60 75 85 100 110 120 140 170 220 250 300 -- -- -- Single capacitor 55 °C 400V [kVAR] 75 90 110 130 145 165 200 210 240 285 400 450 500 -- -- -- 415V [kVAR] 75 90 110 130 145 165 200 210 240 285 400 450 500 -- -- -- 500V [kVAR] 83 110 140 160 180 210 240 260 325 350 490 550 600 -- -- -- 690V [kVAR] 80 110 135 170 200 240 280 300 325 440 600 650 800 -- -- -- 1000V [kVAR] -- 100 140 150 155 160 170 250 300 350 450 -- -- -- -- -- 230V [kVAR] 35 42 45 57 70 85 100 105 120 160 190 230 280 -- -- -- 240V [kVAR] 35 42 45 57 70 85 100 105 120 160 190 230 280 -- -- -- Single capacitor 70 °C 400V [kVAR] 65 74 83 105 135 155 180 195 225 275 370 430 480 -- -- -- 415V [kVAR] 65 74 83 105 135 155 180 195 225 275 370 430 480 -- -- -- 500V [kVAR] 78 96 102 130 165 196 220 241 300 340 435 530 570 -- -- -- 690V [kVAR] 75 110 135 160 200 240 260 300 325 440 600 630 750 -- -- -- 1000V [kVAR] -- 95 120 130 140 150 160 220 270 300 400 -- -- -- -- -- 60 Hz Single Capacitor (cULus) 208V [kVAR] 33 41 50 67 83 100 125 119 142 178 214 -- 346 -- -- -- Single capacitor 40 °C 240V [kVAR] 38 48 57 77 95 115 144 137 164 205 247 -- 398 -- -- -- 480V [kVAR] 75 100 125 150 200 250 300 274 329 411 494 -- 832 -- -- -- 600V [kVAR] 100 125 150 200 250 300 350 343 410 514 618 -- 1040 -- -- -- Switching of Lamps Gas discharge lamps AC-5a open [A] 116 146 190 205 265 305 370 400 460 580 750 877 1072 812 1332 1722 UL Ballast Ratings [A] 160 200 250 300 400 450 520 -- -- -- -- -- -- -- -- -- Filament AC-5b 230/ 240V [A] 116 146 190 205 265 305 370 400 460 580 750 877 1072 812 1332 1722 88 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 47 - Main Circuits 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Switching of DC Loads--Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C 72V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 90V [A] 160 200 250 350 400 500 520 -- -- -- -- -- -- -- -- -- 1 pole 100V [A] -- -- 250 350 400 500 520 -- -- -- -- -- -- -- -- -- 110V [A] -- -- -- -- 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 72V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 110V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 2 poles in series 175V [A] 160 200 250 350 400 500 520 600 700 800 1050 -- -- -- -- -- 200V [A] -- -- 250 350 400 500 520 600 700 800 1050 -- -- -- -- -- 220V [A] -- -- -- -- 400 500 520 600 700 800 1050 -- -- -- -- -- 72V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 110V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 175V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 220V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 3 poles in series 260V [A] 160 200 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 300V [A] -- -- 250 350 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 340V [A] -- -- -- -- 400 500 520 600 700 800 1050 1350 1650 1250 2050 -- 600V [A] -- -- -- -- -- -- -- 600 700 800 1050 1350 1650 1250 2050 -- 850V [A] -- -- -- -- -- -- -- -- -- 800 1050 1350 1650 1250 2050 -- Shunt-wound Motors--Starting, reverse current breaking, reversing, stepping DC-3, 60 °C (L/R 2 ms) 24V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 48/60V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 3 poles in series 110V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 220V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 600V [A] -- -- -- -- -- -- -- 600 700 800 1050 -- -- -- -- -- Series-wound Motors--Starting, reverse current breaking, reversing, stepping DC-5, 60 °C (L/R 7.5 ms) 24V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 48/60V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 3 poles in series 110V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 220V [A] 145 160 250 275 350 400 450 600 700 800 1050 -- -- -- -- -- 600V [A] -- -- -- -- -- -- -- 600 700 800 1050 -- -- -- -- -- Short Time Withstand ICW Rockwell Automation Publication 100-TD013J-EN-P - April 2021 89 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 47 - Main Circuits (Continued) 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 1 s [A] 1300 1460 1900 2050 2650 3050 3700 4600 4600 7000 7000 10000 12000 8000 12000 12000 10 s [A] 928 1168 1520 1640 2120 2440 2960 4400 4400 6400 6400 8000 10000 7200 10000 10000 40 °C 30 s [A] 536 674 878 947 1224 1409 1709 3100 3100 4500 4500 6000 7500 5200 7500 7500 1 min [A] 379 477 621 670 865 996 1208 2500 2500 3500 3500 4500 5500 4000 5500 5500 15 min [A] 160 225 275 350 400 500 600 840 840 1300 1300 1600 2200 1500 2200 2800 Resistance and Power Dissipation Main current circuit resistance [m] 0.469 0.454 0.198 0.204 0.200 0.200 0.200 0.083 0.086 0.050 0.045 0.044 0.029 0.050 0.030 0.028 Power dissipation per pole at Ie AC-1, 400V [W] 12 23 15 25 32 50 72 30 42 32 50 80 80 80 125 200 Power dissipation per pole at Ie AC-3/ 400V [W] 6 10 7 8 14 19 27 16 21 17 28 50 50 -- -- -- Total power dissipation at: Ie AC-3, 400V; AC/DC control (120-250V) [W] 21 33 23.5 26.5 46.5 61.5 85.5 53 68 56 89 171 171 -- -- -- AC-1 ops / hr 300 300 60 300 60 15 Maximum Switching Frequency AC-3 ops / hr 300 300 60 ------ AC-2, AC-4 ops / hr 150 60 60 ------ Weight AC/DC (Electronic) with bar connections kg 1.50 1.50 3 3 4.64 4.64 4.64 12 12 15 15 34 35 16 35 45 (lbs.) (3.3) (3.3) (6.6) (6.6) (10.2) (10.2) (10.2) (26.4) (26.4) (33) (33) (74.8) (77) (35.2) (77) (99) with built-in cable clamps kg 1.75 1.75 (lbs.) (3.85) (3.85) -- -- -- -- -- -- -- -- -- -- -- -- -- -- 90 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 48 - Short-circuit Current Ratings 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) Per IEC 60947-4-1 100 kA Available Fault Current DIN Fuses - Type "2" (400V) gG [A] 250 250 315 315 400 500 630 630 630 800 800 1000 1250 -- -- -- 80 kA Available Fault Current Type "2" (690V) [A] 160 200 315 315 400 425 500 500 630 800 800 1000 1600 -- -- -- MCCB Type "2" (400V) 70 kA Available Fault Current [A] 160 160 320 320 400 630 630 630 630 800 1000 1600 1600 -- -- -- Short Circuit Current Rating (Max. Fuse or Circuit Breaker Rating) Per UL 60947 and CSA 22.2 No. 14 (contactor and fuses or circuit breaker only) UL Class RK5 Fuses Type 1 Combination (600V) 10 kA Available Fault Current [A] 250 250 400 400 -- -- -- -- -- -- -- -- -- -- -- -- 18 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- -- 800 800 800 1000 -- -- -- -- -- -- -- -- UL Class L Fuses Type 1 Combination (600V) 30 kA Available Fault Current [A] -- -- -- -- -- -- -- -- 1000 -- -- -- -- -- -- -- 85 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- -- -- -- -- -- -- -- -- 1600 2000 -- -- -- UL Class J and CSA HRCI-J Type 1 Combination (600V) Fuses Type 2 Combination (600V) 100 kA Available Fault Current [A] 250 250 400 400 600 600 600 600 600 -- -- -- -- -- -- -- [A] 200 200 400 400 600 600 600 600 600 -- -- -- -- -- -- -- UL Class L Fuses Type 1 Combination (600V) Type 2 Combination (600V) 100 kA Available Fault Current [A] -- -- -- -- -- -- -- 800 800 1200 1200 -- -- 1600 -- -- [A] -- -- -- -- -- -- -- -- -- 1200 1200 -- -- -- -- -- 42 kA Available Fault Current Type 1 Combination (480V) [A] -- -- -- -- -- -- -- -- -- 1200 1200 2000 2000 -- -- -- 65 kA Available Fault Current Type 2 Combination (480V) [A] 250 250 400 400 800 800 800 800 800 800 800 -- -- -- -- -- 84 kA Available Fault Current Type 1 Combination (480V) [A] -- -- -- -- -- -- -- 800 800 -- -- -- -- -- -- -- 89 kA Available Fault Current Type 1 Combination (480V) [A] -- -- -- -- -- -- -- -- -- 800 800 -- -- -- -- -- UL Inverse- Time Type 1 Combination (480V) Circuit Breaker Type 2 Combination (600V) 100 kA Available Fault Current [A] 250 250 400 400 800 800 800 -- -- -- -- -- -- -- -- -- 25 kA Available Fault Current [A] 250 250 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 35 kA Available Fault Current Type 2 Combination (600V) [A] -- -- 400 400 800 800 800 800 800 800 800 -- -- -- -- -- 42 kA Available Fault Current Type 1 Combination (600V) [A] -- -- -- -- 800 800 800 800 800 800 800 -- -- -- -- -- 50 kA Available Fault Current Type 1 Combination (600V) [A] 250 250 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 65 kA Available Fault Current Type 1 Combination (600V) [A] -- -- 400 400 400 400 400 -- -- -- -- -- -- -- -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 91 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 49 - Coil Data 100/104-E, 100S-E Operating Limits 50/60 Hz DC control pick-up dropout pick-up dropout [x Us] [x Us] [x Us] [x Us] 24...60V AC pick-up [VA] hold-in [VA] 48...130V AC pick-up [VA] hold-in [VA] 100...250V AC pick-up [VA] hold-in [VA] 250...500V AC pick-up [VA] hold-in [VA] 24...60V DC pick-up [W] hold-in [W] 48...130V DC pick-up [W] hold-in [W] 100...250V DC pick-up [W] hold-in [W] 250...500V DC pick-up [W] hold-in [W] PLC Interface Operating Times AC or DC closing delay [ms] opening delay [ms] With PLC Interface closing delay [ms] opening delay [ms] 116 146 225 5.5 170 4 130 6 205 16 210 2.5 130 2.5 135 3 205 4 20...55 40...70 20...31 24...34 190 205 165 6 175 4 220 7 185 16 205 2.5 130 2.5 190 2.5 190 4 25...60 45...80 25...45 25...45 265 305 370 400 460 580 750 0.85...1.1 0.55 0.80...1.1 0.55 475 -- -- 8.5 -- -- 340 1215 1100 17 12 12 385 955 880 17.5 12 12 420 950 985 21 12 12 400 900 785 3.5 5 5.5 360 1150 1020 2.5 5 5 410 895 880 4.5 5 5 600 885 910 4.7 7.5 7.5 10 mA @ 24V DC 30...60 45...80 25...45 25...45 50...120 33...70 40...60 10...30 50...120 33...70 40...90 10...30 860 1060 1260 2050 2650 -- -- -- -- -- -- -- 1100 -- -- 12 -- 2450 880 2450 48 12 48 -- 985 -- -- 12 -- -- 785 -- -- -- 5.5 -- -- -- 1020 -- -- -- 5 ---- 2290 880 2290 20.5 5 20.5 -- 910 -- -- -- 7.5 -- -- 50...80 35...55 40...65 10...30 50...120 33...70 40...90 10...30 50...80 35...55 40...65 10...30 92 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Conductors Table 50 - Cross Sections, Screw Type Terminals 100/104-E, 100S/104S-E 9 12 16 26 30 38 40 52 65 80 96 Conductor Cross Sections--Main Contacts Terminal Type (1) (2) (3) 1 conductor [mm2] 0.75...6 0.75...6 0.75...6 1.5...10 1.5...10 1.5...10 4...35 4...35 4...35 6...50 6...50 2 conductors [mm2] 0.75...6 0.75...6 0.75...6 1.5...10 1.5...10 1.5...10 4...35 4...35 4...35 6...50 6...50 1 conductor [mm2] 1...6 1...6 1...6 2.5...10 2.5...10 2.5...10 6...35 6...35 6...35 6...70 6...70 2 conductors [mm2] 1...6 1...6 1...6 2.5...10 2.5...10 2.5...10 6...35 6...35 6...35 6...50 6...50 Recommended torque [N·m] 1.5 1.5 1.5 2.5 2.5 2.5 4 4 4 6 6 Cross Section per UL/CSA [AWG] 16...10 16...10 16...10 14...8 14...8 14...8 10...2 10...2 10...2 6...1 6...1 Recommended torque [lb·in] 13 13 13 22 22 22 35 35 35 53 53 Conductor Cross Sections- Coil and Auxiliary Contact (1) Terminal Type 1 conductor 2 conductors 1 conductor 2 conductors Recommended torque Cross Section per UL/CSA Recommended torque [mm2] 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 [mm2] 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 0.75...2.5 [mm2] 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 [mm2] 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 1...2.5 [N·m] 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 [AWG] 18...14 18...14 18...14 18...14 18...14 18...14 18...14 18...14 18...14 18...14 18...14 [lb·in] 11 11 11 11 11 11 11 11 11 11 11 (1) Pozidriv No. 2 / Blade No. 3 screw (2) Pozidriv No. 2 / Blade No. 4 screw (3) Hexagonal socket screw Table 51 - Cross Sections, Screw Type Terminals 100/104-E, 100S-E 116 146 190 205 265 305 370 400 460 580 750 860 1060 1260 2050 2650 Main Terminals 7 10 14.3 10 30 17 25 15.5 40 17 Conductor Cross Sections -- Main Contacts (Terminal type) 13 17.5 Ø 6.5 3 Ø 8.5 5 (1) conductor [mm2] 10...95 10...150 19.5 Ø 10.5 5 16...185 40 25 22.5 22.5 Ø 10.5 Ø 6.5 6 Ø 6.5 Ø 12.5 6 -- -- 80 40 27 Ø 13 10 -- 50 27 80 40 Ø 13 8 -- Ø 13(AF2050) 10 (AF2650) 25 -- Clamp Type 100-ECL146 100-ETL205 100-ETL370 -- -- -- -- -- Recommended torque [N·m] 8 34 42 -- -- -- -- -- (2) conductors [mm2] 10...95 -- 16...500 70...240 70...240 120...240 70...300 -- -- Clamp Type 100-ECL146 -- 100-ETL370B 100-ETL580 100-ETL750 100-ETL860 100-ETL1060 -- -- Recommended torque [N·m] 8 -- 42 31 43 43 57 -- -- (3) conductors [mm2] -- -- -- -- 70...500 120...500 70...750 70...240 -- Clamp Type -- -- -- -- 100-ETL750 100-ETL860 100-ETL1060 100-ETL750 -- Recommended torque [N·m] -- -- -- -- 43 43 57 43 -- (4) conductors [mm2] -- -- -- -- -- 120...500 70...750 -- -- Clamp Type -- -- -- -- -- 100-ETL860 100-ETL1060 -- -- Recommended torque [N·m] -- -- -- -- -- 43 57 -- -- (6) conductors [mm2] -- -- -- -- -- -- 70...750 -- -- Clamp Type -- -- -- -- -- -- 100ETL1060B -- -- Recommended torque [N·m] -- -- -- -- -- -- 57 -- -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 93 100-E/104-E, 100S-E/104S-E Contactors Specifications Table 51 - Cross Sections, Screw Type Terminals (Continued) 100/104-E, 100S-E L max. L Ø Ø min. Recommended torque 116 146 [mm] 22 [mm] 6 [N·m] 9 190 205 265 305 370 400 460 580 750 24 32 47 50 8 10 10 12 18 28 35 45 860 1060 100 12 45 1260 2050 2650 50 100 12 12 45 45 Cross section per UL/CSA (1) conductor [AWG] 6...3/0 6...300 (1) 4...400 (1) -- -- -- -- -- -- Clamp Type 100-ECL146 100-ETL205 100-ETL370 -- -- -- -- -- -- Recommended torque [lb·in] 80 300 375 -- -- -- -- -- -- (2) conductors [AWG] 6...3/0 -- 4...500 (1) 2/0...500 (1) 2/0...500 (1) 4/0...500 (1) 1/0...750 (1) 2/0...500 (1) -- Clamp Type 100-ECL146 -- 100-ETL370B 100-ETL580 100-ETL750 100-ETL860 100-ETL1060 100-ETL750 -- Recommended torque [lb·in] 80 -- 375 275 375 375 500 375 -- (3) conductors [AWG] -- -- -- -- 2/0...500 (1) 4/0...500 (1) 1/0...750 (1) 2/0...500 (1) -- Clamp Type -- -- -- -- 100-ETL750 100-ETL860 100-ETL1060 100-ETL750 -- Recommended torque [lb·in] -- -- -- -- 375 375 500 375 -- (4) conductors [AWG] -- -- -- -- -- 4/0...500 (1) 1/0...750 (1) -- -- Clamp Type -- -- -- -- -- 100-ETL860 100-ETL1060 -- -- Recommended torque [lb·in] -- -- -- -- -- 375 500 -- -- (6) conductors [AWG] -- -- -- -- -- -- 1/0...750 (1) -- -- Clamp Type -- -- -- -- -- -- 100ETL1060B -- -- Recommended torque [lb·in] -- -- -- -- -- -- 500 -- -- L max. [in] 0.866 0.945 1.26 1.85 1.97 3.94 1.97 3.94 L Ø Ø min. [in] 0.236 0.315 0.394 0.394 0.472 0.472 0.472 0.472 Recommended torque [lb·in] 80 160 248 310 398 398 398 398 Conductor Cross Sections -- Coil and Auxiliary Contact Terminals (Terminal Type) (1) conductor [mm2] 0.75...2.5 (2) conductors [mm2] 0.75...2.5 (1) conductor [mm2] 1...4 (2) conductors [mm2] 1...4 Recommended torque [N·m] 1...1.2 Cross section per UL/CSA Recommended torque [AWG] [lb·in] 18...14 8.9...10.6 (1) MCM 94 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Specifications Auxiliary Contacts Table 52 - Auxiliary Contacts Internal 100-E09...E16 Switching of AC Loads Rated Insulation voltage Ui 690V Rated operational voltage Ue 690V Rated impulse withstand voltage Uimp 6kV AC-12 Ith at 40 °C [A] 16 at 60 °C [A] -- 24V [A] -- AC-14 at rated voltage of 42/48V [A] -- 120V [A] -- 24V [A] 6 42/48V [A] 6 120V [A] 6 230V [A] 4 AC-15 at rated voltage of 240V [A] 4 400V [A] 3 415V [A] 3 500V [A] 2 690V [A] 2 Switching of DC Loads 24V DC [A] -- 48V DC [A] -- DC-12 L/R< 1 ms resistive loads at 110V DC [A] -- 220V DC [A] -- 440V DC [A] -- 24V DC [A] -- 48V DC [A] -- DC-14 L/R< 15 ms inductive loads with economy resistor in series at 110V DC [A] -- 220V DC [A] -- 440V DC [A] -- 24V DC [A] 6 48V DC [A] 2.8 DC-13 switching electromagnets at 110V DC [A] 0.55 220V DC [A] 0.27 440V DC [A] 0.13 Fuse gG Short-circuit protection with no welding of contacts per IEC 60947-5-2 [A] 10 [A] 10 Protective Separation per IEC 60947-1, Annex N Min. switching capacity at 12V IEC 60947-5-4 [mA] 3 Min. switching capacity at 3V IEC 60947-5-4 [mA] -- Load Carrying Capacity per UL/CSA Rated voltage AC [V] 600 Continuous rating 40 °C [A] 10 Switching capacity AC A600 Rated voltage DC [V] 600 Continuous rating 40 °C [A] 2.5 Switching capacity DC Q600 Standard 100-EF/ESA* 690V 690V 6kV 16 -- -- -- -- 6 6 6 4 4 3 3 2 2 -- -- -- -- -- -- -- -- -- -- 6 2.8 0.55 0.27 0.13 10 10 3 -- 600 10 A 600 600 2.5 Q 600 Auxiliary contact for 100/104-E, 100S-E Severe Appl. Severe Appl. Standard 100-ES*B/B3 100-ES*B/B3 100-ES1/2* 250V 250V 690V 125V 250V 690V -- -- 6kV 0.1 2 16 -- -- -- 0.1 -- -- 0.1 -- -- 0.1 -- -- -- 2 6 -- 2 6 -- 2 6 -- 2 4 -- 2 4 -- -- 3 -- -- 3 -- -- 2 -- -- 2 0.1 2 -- 0.1 1 -- 0.1 0.2 -- -- 0.1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3 -- -- 1.5 -- -- 0.55 -- -- 0.3 -- -- -- 0.1 10 10 0.1 10 10 -- -- 50 -- 1 -- 125 250 600 0.1 2 10 -- -- A 600 110 220 250 0.1 0.1 2.5 -- -- P 600 Standard 100-ES3/4* 690V 690V 6kV 16 -- -- -- -- 6 6 6 4 4 3 3 2 2 -- -- -- -- -- -- -- -- -- -- 6 2.8 0.55 0.3 -- 10 10 50 -- 600 10 A 600 250 2.5 Q 300 Low Power 100-ES*-B* 250V 125V 1.5kV 0.1 -- 0.1 0.1 0.1 -- -- -- -- -- -- -- -- -- 0.1 0.1 0.1 -- -- -- -- -- -- -- -- -- -- -- -- 0.1 0.1 -- 1 125 0.1 -- 125 0.1 -- Rockwell Automation Publication 100-TD013J-EN-P - April 2021 95 100-E/104-E, 100S-E/104S-E Contactors Life-Load Curves Life-Load Curves 3-pole Contactors -- Electrical Durability Figure 27 - Electrical durability for AC-1 utilization category - Ue 690V Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load. Ambient temperature (see page 83) and maximum electrical switching frequency (see page 90). E09 E12 E16 10 E26 E30, E38 E40 E52 E65 E80, E96 E116 E146 E190 E205 E265 E305 E370 E400 E460 E580 E750 5 3 9 7 5 3 2 9 1 7 5 3 1 1 Millions of operating cycles 0.5 0.3 9 7 5 3 0.2 1 0.1 2 3 5 1 3 5 79 1 59 1 3 5 79 10 20 30 50 26.5 Breaking current Ic [A] 1 3 579 1 3 5 79 1 3 579 1 59 100 200 300 500 1000 Cat. Nos. 100-E860, -E1060: The electrical durability at the rated current is 50,000 operating cycles. 96 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Life-Load Curves Figure 28 - Electrical durability for AC-3 utilization category - Ue 440V Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). For ambient temperature (see page 83) and maximum electrical switching frequency (see page 90). E09 E12 10 E16 E26 E30, E38 E40 E52 E65 E80, E96 E116 E146 E190 E205 E265 E305 E370 E400 E460 E580 E750 Millions of operating cycles 5 3 9 7 5 3 2 9 1 1.8 7 5 3 1 1 0.5 1 3 5 79 0.3 0.2 2 3 5 1 3 5 79 1 59 1 3 5 79 10 20 1 59 30 50 55 Breaking current Ic [A] 1 3 579 1 3 5 79 1 3 579 100 200 300 500 1000 Cat. Nos. 100-E860, -E1060: The electrical durability at the rated current is 50,000 operating cycles. Rockwell Automation Publication 100-TD013J-EN-P - April 2021 97 100-E/104-E, 100S-E/104S-E Contactors Life-Load Curves Figure 29 - Electrical durability for AC-3 utilization category - 440V < Ue 690V Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). For ambient temperature (see page 83) and maximum electrical switching frequency (see page 90). E09 E12 E16 10 E26 E30, E38 E40 E52 E65 E80, E96 E116 E146 E190 E205 E265E305 E370E400E460 E580 E750 Millions of operating cycles 5 3 9 7 5 3 2 9 1 7 1.5 5 3 1 1 0.5 0.3 0.2 1 3 5 7 9 2 3 5 1 3 5 79 1 59 1 3 5 79 10 20 1 3 579 30 50 Breaking current Ic [A] 1 3 579 1 3 5 79 1 3 579 100 140 200 300 500 1000 Cat. Nos. 100-E860, -E1060: The electrical durability at the rated current is 50,000 operating cycles. 98 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Life-Load Curves Figure 30 - Electrical durability for AC-2 or AC-4 utilization category - Ue 440V Switching cage motors: starting, reverse operation and step-by-step operation. The breaking current Ic is equal to 2.5 x Ie for AC-2 and 6 x Ie for AC-4, keeping in mind that Ie is the motor rated operational current (Ie = motor full-load current). For maximum electrical switching frequency (see page 90). E80, E96 E38 E116, E146 E190 E205 E265E305E370 E400 E460 E580 E750 E52 E65 E30, E40 E26 E16 E09 E12 10 5 3 29 7 5 3 1 1 Millions of operating cycles 0.5 0.3 0.2 9 7 5 3 0.1 1 0.05 0.03 0.02 9 7 5 3 0.01 1 0.005 23 5 1 3 579 1 3 579 1 3 579 10 20 30 1 3 579 50 100 200 300 500 Breaking current Ic [A] 1 3 579 1000 2000 3000 5000 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 99 100-E/104-E, 100S-E/104S-E Contactors Life-Load Curves Figure 31 - Electrical durability for AC-2 or AC-4 utilization category - 440V < Ue 690V Switching cage motors: starting, reverse operation and step-by-step operation. The breaking current Ic is equal to 2.5 x Ie for AC-2 and 6 x Ie for AC-4, keeping in mind that Ie is the motor rated operational current (Ie = motor full load current). For maximum electrical switching frequency (see page 90). E09 E12 E16 E26 E30 E38 E40 E52 E65 E80, E96 Millions of operating cycles 10 5 3 29 7 5 3 1 1 0.5 0.3 0.2 9 7 5 3 0.1 1 0.05 0.03 0.02 9 7 5 3 0.01 1 0.005 23 5 E116E146 E190 E205E265E305 E370 E400E460 E580E750 1 3 579 1 3 579 10 20 30 1 3 579 50 100 200 300 500 Breaking current Ic [A] 1 3 579 1000 2000 3000 5000 100 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Approximate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. Figure 32 - Mounting Position for 100-E09...100-E96 Devices-- AC/DC and AC/DC with PLC input Position 2 +30° -30° Position 4 Position 3 Position 1 Position 1 ± 30° Position 5 9...16 A Contactors Figure 33 - 100-E09...100-E16 Contactors with Standard Coils 77 (3.03) 6 (0.24) 45 (1.77) 71 (2.80) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) Figure 36 - 100-E09...100-E16 Contactors with Standard Coils and Side-mounted Auxiliary Contact 12 (0.47) 45 (1.77) 6 (0.24) 77 (3.03) 71 (2.80) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 34 - 100-E09...100-E16 Contactors with Low-consumption Coils 77 (3.03) 6 (0.24) 45 (1.77) 71 (2.80) 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 37 - 100-E09...100-E16 Contactors with Low-consumption Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 110.5 (4.35) 71 (2.80) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 35 - 100-E09...100-E16 Contactors with Standard Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 110.5 (4.35) 71 (2.80) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 38 - 100-E09...100-E16 Contactors with Low-consumption Coils and Side-mounted Auxiliary Contact 77 (3.03) 12 (0.47) 45 (1.77) 6 (0.24) 71 (2.80) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Rockwell Automation Publication 100-TD013J-EN-P - April 2021 10 (0.39) 101 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 39 - 104-E09...104-E16 Reversing Contactors with Cat. No. 100-EMCA02 Mechanical and Electrical Interlock 90 (3.54) 102.5 (4.04) 71 (2.80) 5.5 (0.22) 91.5 (3.60) 35 mm EN/IEC 60715 43 (1.69) 10 (0.39) Figure 40 - Drilling Template for 9...16 A Contactors 35 (1.38) ø 4.2 (0.17) 2 x M4 8...32 UNC 80 (3.15) 2 x M4 8...32 UNC 60 (2.36) 70 (2.76) 60 (2.36) 5 (0.20) 5 (0.20) Non reversing contactors 70 (2.76) ø 4.2 (0.17) 5 (0.20) Reversing contactors 5 (0.20) 26...38 A Contactors Figure 41 - 100-E26...100-E38 3-Pole Contactors with Standard Coils 6 (0.24) 45 (1.77) 86 (3.39) 80 (3.15) 5.5 (0.22) Figure 43 - 100-E26...100-E38 3-Pole Contactors with Lowconsumption Coils 6 (0.24) 45 (1.77) 86 (3.39) 80 (3.15) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 42 - 100-E26...100-E38 4-Pole Contactors with Standard Coils 6 (0.24) 45 (1.77) 101 (3.98) 96 (3.74) 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 44 - 100-E26...100-E38 4-Pole Contactors with Lowconsumption Coils 6 (0.24) 45 (1.77) 101 (3.98) 96 (3.74) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 10 (0.39) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth 102 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Figure 45 - 100-E26...100-E38 3-Pole Contactors with Standard Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 119.5 (4.70) (4-Pole aux. contact) 111.5 (4.39) (2-Pole aux. contact) 80 (3.15) 5.5 (0.22) 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 49 - 100-E26...100-E38 3-Pole Contactors with Lowconsumption Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 119.5 (4.70) (4-Pole aux. contact) 111.5 (4.39) (2-Pole aux. contact) 80 (3.15) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 46 - 100-E26...100-E38 4-Pole Contactors with Standard Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 135.5 (5.33) (4-Pole aux. contact) 127.5 (5.02) (2-Pole aux. contact) 96 (3.74) 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 50 - 100-E26...100-E38 4-Pole Contactors with Lowconsumption Coils and Front-mounted Auxiliary Contact 6 (0.24) 45 (1.77) 135.5 (5.33) (4-Pole aux. contact) 127.5 (5.02) (2-Pole aux. contact) 96 (3.74) 5.5 (0.22) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 47 - 100-E26...100-E38 3-Pole Contactors with Standard Coils and Side-mounted Auxiliary Contact 12 (0.47) 45 (1.77) 6 (0.24) 86 (3.39) 80 (3.15) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 51 - 100-E26...100-E38 3-Pole Contactors with Lowconsumption Coils and Side-mounted Auxiliary Contact 12 (0.47) 45 (1.77) 6 (0.24) 86 (3.39) 80 (3.15) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 48 - 100-E26...100-E38 4-Pole Contactors with Standard Coils and Side-mounted Auxiliary Contact 12 (0.47) 45 (1.77) 6 (0.24) 101 (3.98) 96 (3.74) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Rockwell Automation Publication 100-TD013J-EN-P - April 2021 10 (0.39) 103 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 52 - 100-E26...100-E38 4-Pole Contactors with Lowconsumption Coils and Side-mounted Auxiliary Contact 12 (0.47) 45 (1.77) 6 (0.24) 101 (3.98) 96 (3.74) 5.5 (0.22) 69.4 (2.73) 80 (3.15) 35 mm EN/IEC 60715 5.5 (0.22) 10 (0.39) For contactors with QJ coils, add 20 mm (0.79 in.) to the depth Figure 53 - 104-E26...104-E38 Reversing Contactors with Cat. No. 100-EMCA02 Mechanical and Electrical Interlock 90 (3.54) 111.5 (4.39) 80 (3.15) 5.5 (0.22) 91.5 (3.60) 35 mm EN/IEC 60715 5.5 (0.22) 43 (1.69) 10 (0.39) Figure 54 - Drilling Template for 26...38 A Contactors 35 (1.38) ø 4.2 (0.17) 2 x M4 8...32 UNC 80 (3.15) 2 x M4 8...32 UNC 60 (2.36) 70 (2.76) 60 (2.36) 70 (2.76) 5 (0.20) 5 (0.20) Non reversing contactors ø 4.2 (0.17) 5 (0.20) Reversing contactors 5 (0.20) 40...65 A Contactors Figure 55 - 100-E40...100-E65 3-Pole Contactors 6 (0.24) 55 (2.17) 111 (4.37) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 Figure 56 - 100-E40...100-E65 3-Pole Contactors with Frontmounted Auxiliary Contact 6 (0.24) 55 (2.17) 7 (0.28) 144 (5.67) (4-Pole auxiliary contact) 136 (5.35) (2-Pole auxiliary contact) 111 (4.37) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 43 (1.69) 10 (0.39) 10 (0.39) 104 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Figure 57 - 100-E40...100-E65 3-Pole Contactors with Sidemounted Auxiliary Contact 12 (0.47) 55 (2.17) 6 (0.24) 7 (0.28) 111 (4.37) 69.4 (2.73) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 60 - 100-E40...100-E52 4-Pole Contactors 6 (0.24) 70 (2.76) 113.5 (4.47) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) Figure 58 - 104-E40...104-E65 Reversing 3-Pole Contactors 110 (4.34) 7 (0.28) 111 (4.37) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) Figure 61 - 100-E40...100-E52 4-Pole Contactors with Frontmounted Auxiliary Contact 6 (0.24) 70 (2.76) 7 (0.28) 147 (5.79) (4-Pole auxiliary contact) 139 (5.47) (2-Pole auxiliary contact) 113.5 (4.47) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 43 (1.69) 10 (0.39) Figure 59 - Drilling Template for 40...65 A 3-Pole Contactors 35 (1.38) ø 4.2 (0.17) 2 x M4 8...32 UNC 80 (3.15) 2 x M4 8...32 UNC 60 (2.36) 70 (2.76) 60 (2.36) 5 (0.20) 5 (0.20) Non reversing contactors 70 (2.76) ø 4.2 (0.17) 5 (0.20) Reversing contactors 5 (0.20) 10 (0.39) Figure 62 - 100-E40...100-E52 4-Pole Contactors with Sidemounted Auxiliary Contact 70 (2.76) 6 (0.24) 113.5 (4.47) 12 (0.47) 7 (0.28) 69.4 (2.73) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) Figure 63 - Drilling Template for 40...52 A 4-Pole Contactors 60 (2.36) ø 6.4 (0.25) 2 x M6 1/4...20 UNC 110 (4.33) 100 (3.94) 4.6 (0.18) 5 (0.20) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 105 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions 80...96 A Contactors Figure 64 - 100-E80...100-E96 3-Pole Contactors 6 (0.24) 70 (2.76) 116 (4.57) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 Figure 66 - 100-E80...100-E96 3-Pole Contactors with Sidemounted Auxiliary Contact 12 (0.47) 70 (2.76) 6 (0.24) 116 (4.57) 7 (0.28) 69.4 (2.73) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) Figure 65 - 100-E80...100-E96 3-Pole Contactors with Frontmounted Auxiliary Contact 6 (0.24) 70 (2.76) 149 (5.87) (4-Pole auxiliary contact) 116 (4.57) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 43 (1.69) 10 (0.39) Figure 67 - 104-E80...104-E96 Reversing 3-Pole Contactors 6 (0.24) 140 (5.51) 116 (4.57) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) 10 (0.39) Figure 68 - Drilling Template for 80...96 A 3-Pole Contactors 60 (2.36) 2 x M6 1/4...20 UNC 130 (5.12) M6 1/4...20 UNC 110 (4.33) 100 (3.94) 110 (4.33) 100 (3.94) ø 6.4 (0.25) 5 (0.20) 4.6 (0.18) Non reversing contactors 4.6 (0.18) ø 6.4 (0.25) 5 (0.20) Reversing contactors Figure 69 - 100-E80 4-Pole Contactors 6 (0.24) 90 (3.54) 116 (4.57) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) Figure 70 - 100-E80 4-Pole Contactors with Front-mounted Auxiliary Contact 6 (0.24) 90 (3.54) 149 (5.87) (4-Pole auxiliary contact) 116 (4.57) 7 (0.28) 119.5 (4.70) 5.5 (0.22) 35 mm EN/IEC 60715 43 (1.69) 10 (0.39) 106 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 Figure 71 - 100-E80 4-Pole Contactors with Side-mounted Auxiliary Contact 12 (0.47) 90 (3.54) 6 (0.24) 116 (4.57) 7 (0.28) 119.5 (4.70) 69.4 (2.73) 5.5 (0.22) 35 mm EN/IEC 60715 10 (0.39) 116...2650 A Contactors Figure 73 - Mounting Position for 100-E116...100-E2650 Devices-- AC/DC and AC/DC with PLC input 30° 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 72 - Drilling Template for 80 A 4-Pole Contactors 80 (3.15) ø 6.4 (0.25) 2 x M6 1/4...20 UNC 110 (4.33) 100 (3.94) 4.6 (0.18) 5 (0.20) Non reversing contactors Figure 76 - 104-E116E..., 104-E146E... Reversing Contactors with Cat. No. 100-EM... Mechanical Interlock 180 (7.09) 126 (4.96) 180° 120° 180° 150 (5.91) Figure 74 - 100-E116K..., 100-E146K... Contactors 10 (0.39) 90 (3.54) 126 (4.96) 150 (5.91) D 55.5 (2.18) 19.5 (0.77) Figure 77 - Drilling Template for 116...146 A 3-Pole Contactors 30 (1.18) M4 (8...32 UNC) 8 x M4 30 (1.18) 60 (2.36) 30 (1.18) (8...32 UNC) 100 (3.94) 100 (3.94) 30 (1.18) Figure 75 - 100-E116E..., 100-E146E... Contactors with PLC Input 10 (0.39) 90 (3.54) 142.5 (5.61) 150 (5.91) D 55.5 19.5 (2.18) (0.77) Non reversing contactors Reversing contactors 30 (1.18) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 107 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 78 - 100-E190, 100-E205 Contactors 10 (0.39) 105 (4.13) ø 8.5 (0.33) 35.5 (1.40) 152 (5.98) 5 (0.20) Figure 81 - Drilling Template for 190...205 A 3-Pole Contactors 35 (1.36) M5 (10...24 UNC) 6 x M5 35 (1.36) 70 (2.76) 35 (1.36) (10...24 UNC) 165 (6.50) 165 (6.50) 196 (7.72) 83.5 (3.29) 29.5 (1.16) 35 (1.38) Figure 79 - 100-E190E, 100-E205E Contactors with PLC Input 10 (0.39) 105 (4.13) ø 8.5 (0.33) 35.5 (1.40) 169.5 (6.67) 5 (0.20) Non reversing contactors Reversing contactors Figure 82 - 100-E265...100-E370 Contactors 10 (0.39) 140 (5.51) 19.5 (0.77) ø 10.5 (0.41) 35.5 (1.40) 180 (7.09) 5 (0.20) 94.7 (3.73) 33.4 (1.31) 83.5 (3.29) 29.5 (1.16) 225 (8.86) 196 (7.72) 35 (1.38) Figure 80 - 104-E190, 104-E205 Reversing Contactors with Cat. No. 100-EM... Mechanical Interlock 210 (8.27) 152 (5.98) 43.75 (1.72) Figure 83 - 100-E265E...100-E370E Contactors with PLC Input 10 (0.39) 140 (5.51) 19.5 (0.77) ø 10.5 (0.41) 35.5 (1.40) 195.5 (7.70) 5 (0.20) 94.7 (3.73) 33.4 (1.31) 225 (8.86) 196 (7.73) 43.75 (1.72) 108 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 84 - 104-E265...104-E370 Reversing Contactors with Cat. No. 100-EM... Mechanical Interlock 210 (8.27) 152 (5.98) 196 (7.73) Figure 85 - Drilling Template for 265...370 A 3-Pole Contactors 43.75 (1.72) M5 (10...24 UNC) 8 x M5 43.75 (1.72) 96.25 (3.79) 43.75 (1.72) (10...24 UNC) 187 (7.36) 187 (7.36) Non reversing contactors Reversing contactors Figure 86 - 100-E400, 100-E460 Contactors with PLC Input 186 (7.32) 25(0.98) 22.5 (0.89) ø 6.5 (0.26) ø 10.5 (0.41) 48.5 (1.91) 216 (8.5) 6 (0.24) 268 (10.55) 11.5 (0.45) 278 (10.94) 63 (2.48) 248 (9.76) 63 (2.48) 332 (13.1) M5 (10-24 UNC) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 109 273 (10.75) 11.5 (0.45) 283 (11.14) 249 (9.8) 347 (13.7) 344 (13.54) 313 (12.32) 263 (10.35) 249 (9.8) 249 (9.8) 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 87 - 100-E580...100-E750 Contactors with PLC Input 40 (1.57) 210 (8.27) 22.5 (0.89) ø 6.5 (0.26) ø 12.5 (0.49) 48.5 (1.91) 242 (9.53) 6 (0.24) 72 (2.83) Figure 88 - 100-E1260 Contactors with PLC Input 50 (1.97) 27 72 (2.83) ø 7 (0.28) 242 (9.53) ø 7 (0.28) 72 (2.83) 72 (2.83) 210 (8.27) 46.5 8 (0.31) (18.3) 72 (2.83) M6 (1/4-20 UNC) 72 (2.83) M6 (1/4-20 UNC) 110 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Figure 89 - 100-E860, 100-E1060, 100-E2050, 100-E2650 Contactors with PLC Input 13 (0.51) 40 (1.57) 27 (1.06) E860, E1060 ø 13 (0.51) 17 (0.67) 30 (1.18) 10 (0.39) 40 (1.57) 17 (0.67) 40 (1.57) E2050, E2650 136 (5.35) 136 (5.35) A B C 244 (9.61) BC E860, E1060, E2050 392 (15.43 47 (1.85) 10 (0.39) E2650 422 (16.61 53(2.09) 25 (0.98) 136 (5.35) 312 (12.28) 312 (12.3) A 80 (3.15) 101 (3.98) 136 (5.35) 438 (17.24) ø 9 (0.35) 4 0 (1.57) M8 (5/16-18 UMC) Rockwell Automation Publication 100-TD013J-EN-P - April 2021 111 100-E/104-E, 100S-E/104S-E Contactors Approximate Dimensions Notes: 112 Rockwell Automation Publication 100-TD013J-EN-P - April 2021 IEC Contactor Specifications Technical Data Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Rockwell Automation Global SCCR Tool, rok.auto/sccr UL Standards Listing for Industrial Control Products, publication CMPNTS-SR002 American Standards, Configurations, and Ratings: Introduction to Motor Circuit Design, publication IC-AT001 Industrial Components Preventive Maintenance, Enclosures, and Contact Ratings Specifications, publication IC-TD002 Safety Guidelines for the Application, Installation, and Maintenance of Solid-State Control, publication SGI-1.1 Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Product Certifications website, rok.auto/certifications. Description Provides coordinated high-fault branch circuit solutions for motor starters, soft starters, and component drives. Assists original equipment manufacturers (OEMs) with construction of panels, to help ensure that they conform to the requirements of Underwriters Laboratories. Provides an overview of American motor circuit design based on methods that are outlined in the NEC. Provides a quick reference tool for Allen-Bradley industrial automation controls and assemblies. Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general guidelines for the application, installation, and maintenance of solid-state control in the form of individual devices or packaged assemblies incorporating solid-state components. Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details. You can view or download publications at rok.auto/literature. Rockwell Automation Publication 100-TD013J-EN-P - April 2021 113 Rockwell Automation Support Use these resources to access support information. Technical Support Center Knowledgebase Local Technical Support Phone Numbers Literature Library Product Compatibility and Download Center (PCDC) Find help with how-to videos, FAQs, chat, user forums, and product notification updates. Access Knowledgebase articles. Locate the telephone number for your country. Find installation instructions, manuals, brochures, and technical data publications. Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes. rok.auto/support rok.auto/knowledgebase rok.auto/phonesupport rok.auto/literature rok.auto/pcdc Documentation Feedback Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback. Allen-Bradley, expanding human possibility, FactoryTalk, Rockwell Automation are trademarks of Rockwell Automation, Inc. EtherNet/IP is a trademark of ODVA, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec. Rockwell Otomasyon Ticaret A.. Kar Plaza Merkezi E Blok Kat:6 34752, çerenköy, stanbul, Tel: +90 (216) 5698400 EEE Yönetmeliine Uygundur Publication 100-TD013J-EN-P - April 2021 Supersedes Publication 100-TD013I-EN-P - February 2021 Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Acrobat Distiller 21.0 (Windows)