User Manual for BROWAN models including: L0001, 2AAS9-L0001, 2AAS9L0001, L0001 MerryIoT Hotspot Miner V1, MerryIoT Hotspot Miner V1, Miner V1
BROWAN COMMUNICATIONS INCORPORATION L0001 MerryIoT Hotspot Miner V1 2AAS9-L0001 2AAS9L0001 l0001
Browan Communications Inc. No.15-1, Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, R.O.C. 30352 Tel: 886-3-6006899 Fax: 886-3-5972970
Browan Communications Inc. No.15-1, Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, R.O.C. 30352 Tel: +886-3-6006899 Fax: +886-3-5972970 Document Number BQW_02_XXXXXX MerryIoT Hotspot Miner V1 Model:L0001 User Manual Revision History Revision Date .001 Oct. 21, 2021 Description First release Author Vincent GNMS USER GUIDE Copyright © 2021 BROWAN COMMUNICATIONS INC. This document is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of BROWAN COMMUNICATIONS INC. Notice BROWAN COMMUNICATIONS INC. reserves the right to change specifications without prior notice. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. BROWAN COMMUNICATIONS INC. shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from BROWAN COMMUNICATIONS INC. Trademarks The product described in this document is a licensed product of BROWAN COMMUNICATIONS INC.. GNMS USER GUIDE Contents REVISION HISTORY .............................................................................................................................. 1 COPYRIGHT ........................................................................................................................................... 2 NOTICE................................................................................................................................................... 2 TRADEMARKS....................................................................................................................................... 2 CONTENTS ............................................................................................................................................ 3 CHAPTER 1 INTRODUCTION ............................................................................................................ 4 Purpose and Scope ............................................................................................................................. 4 Product Design .................................................................................................................................... 4 Product Features ................................................................................................................................. 4 System Architecture ............................................................................................................................ 5 Definitions, Acronyms and Abbreviations............................................................................................ 5 Reference ............................................................................................................................................ 5 CHAPTER 2 HARDWARE DETAILS .................................................................................................. 6 LED Indicators ..................................................................................................................................... 6 I/O Ports .............................................................................................................................................. 7 Back Label........................................................................................................................................... 8 Package Label..................................................................................................................................... 9 Package Content ................................................................................................................................. 9 CHAPTER 3 SYSTEM SPECIFICATION .......................................................................................... 11 Hardware Specification ..................................................................................................................... 11 LoRa Specification ............................................................................................................................ 12 LoRa RF Specification....................................................................................................................... 12 Software Specification....................................................................................................................... 12 3.1 Configuration/Performance/Capability.....................................................................................12 3.2 Basic Features.........................................................................................................................13 3.3 LoRaWAN features..................................................................................................................14 Regulatory Specification.................................................................................................................... 14 Reliability Specification...................................................................................................................... 14 CHAPTER 4 USER MANUAL ........................................................................................................... 15 4.1 Connect Femto Lite ..................................................................................................................... 15 4.2 Femto Lite Setting ....................................................................................................................... 15 STEP 1 : SET WAN .......................................................................................................................15 FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT................................ 19 GNMS USER GUIDE Chapter 1 Introduction Purpose and Scope MerryIoT Hotspot Miner V1 is designed for edge computing applications in IoT, Smart Manufacturing, Automation, Blockchain and etc, to support high performance, high reliability and high throughput for the heavy data processing demand. MerryIoT Hotspot Miner V1 is targeting at AIoT applications with quad A55 cores, G52 GPU hardware, based on Linux distribution. IoT solution providers can easily integrate advanced and stable functions for their application-centric development on their own IoT projects. Product Design The dimension of L0001 Helium Hotspot Miner V1 is with the dimension of 140 x 110 x 24 mm, and with one LAN port, one USB port, One TF card and 12V1A power input, four LED indicators, and one reset button. Product Features Up to 8 concurrent channels for LoRa transmission GNMS USER GUIDE Built-in 2.4G 802.11b/g/n Wireless LAN, and Bluetooth 5.2 Various Internet connection: Ethernet, WiFi Support LoRaWan 1.0.3 packet forwarder and Basic Station mode Ethernet/WiFi Configuration through APP Support BROWAN OTA Externalantennas for LoRa and internal antenna for WiFi connection System Architecture Definitions, Acronyms and Abbreviations Item LPWAN LoRaWANTM ABP OTAA TBD Description Low-Power Wide-Area Network LoRaWANTM is a Low Power Wide Area Network (LPWAN) specification intended for wireless battery-operated Things in a regional, national or global network. Activation by Personalization Over-The-Air Activation To Be Defined Reference Document LoRaWAN Specification v1.0.3 RP002-1.0.1 LoRaWAN Regional Parameters LoRaWAN Backend Interfaces Specification v1.0 Author LoRa Alliance LoRa Alliance LoRa Alliance GNMS USER GUIDE Chapter 2 Hardware Details LED Indicators LED sequence: Power(System), Internet,WiFi, LoRa,BT. Four Green, One White Solid LED is for static status, blanking means system is upgrading or active devices linked to the corresponding port Solid On Bl i nki ng Of f Pow er Syst em(Green) Power ON Boot ing/ OTA Power Of f Int ernet (Green) Int ernet available Check Int ernet RFU Wi r el ess( Gr een) Wireless connect ed t o root AP RFU Wireless NOT connect ed t o root AP LoRa( Gr een) BT(Whit e) LoRa is working Init ialing BT Advert ising BT But t on pr essed Table 1 LED Behaviors LoRa is not working No BT Advert ising GNMS USER GUIDE Figure 1 IO Ports I/O Ports Port RJ45 Reset USB TF Card Coun t 1 1 1 Description WAN port of the device Reset to default (5 seconds to reset settings to factory default) Power input via USB adaptor(5VDC/2A) GNMS USER GUIDE Figure 2 IO Ports Back Label The marking information is located at the bottom of apparatus. GNMS USER GUIDE Figure 3 Back Label Package Label N Item o. Description 1 Product BOX Gift Box 2 Labeling Model/ MAC/ Serial Number/ Type Approval Package Content N Description o. Quantity GNMS USER GUIDE 1 MerryIoT Hotspot Miner V1 1 2 Power adapter (12V/1A) 1 3 LoRa Antenna and Base 1 Chapter 3 System Specification Hardware Specification No. Item 1 CPU 2 Memory 3 Storage 4 LoRa radio 5 W-Fi radio 6 BLE radio 7 Crypto chip 8 LAN interface 9 TF 10 USB 11 LEDs 12 Button 13 Console 14 Environment 15 IP ratings 16 Size 17 Power Note Description - Rockchip RK3566 - Quad-core Cortex-A55 up to 1.8GHz - DDR3/4 4GB - eMMC 32GB - US 915 SKU - External SMA antenna - 2.4GHz 1Tx/1Rx 802.11 b/g/n - Built-in antenna - 2.4GHz BLE 5.2 - Built-in antenna - I2C control - Microchip ATECC608A/B in SOIC-8 and UDFN-8 - RJ45 1Gbps x 1 - External TF card slot - Supports SDXC or higher speed - External USB-A 2.0 connector - Reserved for future use - Logo - Single colored LED indicator (green) x 4 Power Status System Wi-Fi - Push button (GPIO) - Debug UART console - Temp. operating -10°C ~ +40°C ambient - Storage -20°C ~ +70°C ambient - Humidity operating 5%RH ~ 95%RH (non-condensed relative humidity) - Altitude operating 0 ~ 3000 Meters - IP42 (plastic enclosure) - 140x110x20 mm - DC jack - DC12V 1~1.5A LoRa Specification No. Item 1 Channels 2 Chipset 3 Bandwidth 4 Power 5 Antenna 6 Interface 7 GPIOs 8 Form Factor 9 Channel Plan -US915 Description US915 (known as US902-928) SX1302+SX1250 (x2) 125KHz/ 500KHz 5VDC, 500mA (typical) 1 ipex connector on board for external antenna SPI for data communication To control SX1262 (chip select) - Mini-PCIe - 40 x 50 (w/golden pins) x 3 mm - Uplink Frequency (MHZ) Spreading Factor 903.9 904.1 SF7BW125 to SF10BW125 SF7BW125 to SF10BW125 904.3 904.5 SF7BW125 to SF10BW125 SF7BW125 to SF10BW125 904.7 SF7BW125 to SF10BW125 904.9 905.1 SF7BW125 to SF10BW125 SF7BW125 to SF10BW125 905.3 904.6 SF7BW125 to SF10BW125 SF8BW500 Note - Downlink Frequency (MHZ) 923.3 923.9 924.5 925.1 925.7 926.3 926.9 927.5 923.3 Spreading Factor SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF12BW500 (RX2) Software Specification 3.1 Configuration/Performance/Capability Req. Features # De scr ipt ion PR- Net work 0001 Conf igurat ion WiFi or Et hernet swit ch Conf igurat ion PR0002 BLE Name MerryIoT Hotspot V1_xxxxxx where the last hex are the last 6 uppercase hex of the MAC address. comment PR0003 OTA OTA dail y check Browan OTA ALi OTA loading ? PR0003 SSH Password Account : root Password: Creat e by MerryIot sign key based on MAC 8 charact ers English uppercase and l owercase, 2~9 numbers ( def ault Skip: 0, O, 1, I, l, o ) PR0004 Gat eway Conf ig Net work set t ing WiFi o App skip WiFi Helium on boarding 3.2 Basic Features Req. # Features Description PR-1001 BLE But t on Over 6 seconds t hen t rigger BLE provision PR-1002 LED 5 LEDS o Power LED o Int ernet LED o WiFi LED o LoRa LED o BT LED Ref er t o Table 1 LED Behavior. PR-1003 Et hernet Et hernet connect ion comment PR-1004 WiFi St at ion WiFi St at ion Mode PR-1005 BLE Conf igurat ion t hrough BLE PR-1006 Debug port UART f or debug PR-1007 OTA OTA agent PR-1008 SW Monit or PR-1009 HW Wat chdog Monit or packet f orwarder Monit or Hel ium Miner Monit or Gat eway Conf ig Monit or syst em 3.3 LoRaWAN features Req. Features # De scr ipt ion PR2001 Packet For w ar der Compat ible wit h Semt ech LoRa Packet For w ar der PR2002 Mi ner Applicat ion Miner Appl icat ion PR2003 gat eway_mf r Swarm key provision PR2004 Gat eway conf ig WiFi Set t ing Helium on boarding comment Regulatory Specification No Item . 1 FCC/IC 2 NCC 3 CE 4 RCM Standard TBD TBD EN 300 328 V2.2.2(included EN 62311/EN 50665/EN 50385) EN 300 220-2 V3.1.1 EN 301 489-1 V2.2.3 EN 301 489-3 V2.1.1 EN 301 489-17 V3.2.4 EN 55032 / EN 55024 EN 62368-1 LVD TBD Reliability Specification No. Item 1 MTBF Specification 300,000 @ 40 Chapter 4 User Manual 4.1 Connect MerryIoT Hotspot You can connect to the gateway via WiFi interface which the SSID and password printed on the back label by default. The rule of gateway SSID is MerryIoT-xxxxxx where the last digits are the last 6 digits of the MAC address The PC will fetch IP address of range 192.168.4.x except 192.168.4.1 assigned by the AP. 4.2 Hotspot Setting Open the web browser(ex:Chrome) after connect to the gateway via IP address "192.168.4.1" Now you can configure the gateway through the WEB UI. STEP 1 : SET WAN The gateway support either "Ethernet" or "Wi-Fi" connection as the internet backhaul. Figure 4 WANconnection STEP 1.1Ethernet Setting Configure the IP address of WAN.[Static IP/DHCP client] Figure 5 WAN connection ETHERNET STATUS The information of IP address/Subnet Mask/Gateway/DNS. ETHERNET SETTING - Configure the IP address of WAN.[Static IP/DHCP client] Static IP Setup the IP address/Subnet Mask/Default Gateway/DNS of the static IP. Contact to the network administrator for the static IP address information. DHCP The IP address/Subnet Mask/Default Gateway/DNS will be assigned by the DHCP server. Figure 6 DHCP client STEP 1.2Wi-Fi Select "Wi-Fi" to be the internet backhaul connection. The gateway WiFi interface is the Access Point by default which SSID is "Femto_Lite-XXXXXX" printed on the back label. Administrator can only access to the WEB UI through the Access Point mode to configure the gateway. The gateway will be the WiFi client and won't access to the WEB UI after enable WiFi interface as the internet backhaul connection. Figure 7 Wi-Fi connection MANUAL CONNECTSpecify the remote AP SSID and enter the password if necessary. Click "Join" to accept or "Cancel" to abort. Figure 8 Wi-Fi manual connection The gateway will scan the neighbor access point automatically. Just click the SSID for the WiFi connection. Figure 9 Wi-Fi manual connection Enter WiFi password if it is necessary for the connection. Figure 10 Wi-Fi password Click "Join" to accept or "Cancel" to abort. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation ExposureStatement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Operation of this device is restricted to indoor use only Industry Canada statement: This devicecontains licence-exempt transmitter(s)/receiver(s) thatcomplywith Innovation, Science and EconomicDevelopmentCanada's licence-exempt RSS(s). Operationissubject to the followingtwoconditions: (1) This devicemay not cause interference (2) This device must acceptanyinterference, includinginterferencethatmay cause undesiredoperation of the device L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation ExposureStatement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conformeCanadalimites d'exposition auxradiations dansun environnement non contrôlé. Cet équipement doit êtreinstallé et utilisé àdistance minimum de 20cmentre le radiateur etvotre corps.Acrobat Distiller 18.0 (Windows)