Please review '573 New Template' 2
Ansley, Alexander (NHTSA) DOT alexander.ansley@dot.gov Ansley, Alexander (NHTSA)
PDF
RCLRPT-21V328-1882 Part 573 Safety Recall Report
OMB Control No.: 2127-0004
21V-328
Manufacturer Name : PACCAR Incorporated
Submission Date : MAY 10, 2021 NHTSA Recall No. : 21V-328 Manufacturer Recall No. : 21PBE
Manufacturer Information : Manufacturer Name : PACCAR Incorporated
Address : 777 106TH AVENUE NORTHEAST BELLEVUE WA 98004
Company phone : 940 591 4220
Population :
Number of potentially involved : 13 Estimated percentage with defect : 1 %
Vehicle Information :
Vehicle 1 : 2021-2021 Peterbilt 348, 579
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style :
Power Train : NR
Descriptive Information : Recall population was determined based on Meritor's identification of line-sequenced assemblies produced with TSE-supplied chambers before TSE's heat treat fixture was corrected.
Production Dates : MAR 11, 2020 - JUL 13, 2020
VIN Range 1 : Begin :
NR
End : NR
Not sequential
Description of Defect :
Description of the Defect : Brake chamber with mis-aligned park spring may cause fatigue hole in diaphram and internal air leak.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Air leak could drain air system pressure, causing brake drag and setting park brakes, increasing the risk of a crash
Description of the Cause : Root cause was determined to be the deformation of the spring after the heattreat process due to the heat-treat fixture allowing springs to touch each other. The perpendicularity of the spring can cause the pressure plate to be misaligned and cause a fatigue hole in the diaphragm. TSE fixed the heat-treat fixture as well as tightened the allowable tolerance and frequency of inspections during heat-treat process
Identification of Any Warning A variety of warnings can occur, including low air warnings, difficulty going that can Occur : into gear due to low air pressure, audible air leaks and inability to build up enough pressure to release park brakes.
The information contained in this report was submitted pursuant to 49 CFR §573
Part 573 Safety Recall Report
Involved Components : Component Name 1 : ADB Brake Assembly
Component Description : NR Component Part Number : B75-6000-320L211
21V-328 Page2
Supplier Identification : Component Manufacturer Name : Meritor Address : NR NR Country : NR
Chronology : 4/5/21 - Meritor informed Peterbilt Product Safety & Compliance that their brake chamber supplier had a potential quality issue with 52 brake chambers that were installed on Peterbilt trucks. 4/6/21 - Meritor and Paccar met to discuss details of the issue, containment and suspect population. 4/7/21 - Meritor provided summary of their testing of the suspect brake chambers and more information from Walmart's experience with the suspect brake chambers. 4/12/21 - 4/23/21 - Peterbilt Product Safety and Compliance communicated with Meritor regarding issue and suspect brake chamber list. 5/3/21 - Meritor sent a copy of their 573 defect report filed April 08, 2021. 5/4/21 - PB Safety Committee met and determined a defect relating to motor vehicle safety exists.
Description of Remedy : Description of Remedy Program : Peterbilt dealers will replace suspect brake chambers on trucks in the field free of charge. How Remedy Component Differs The remedy component has a correctly aligned park spring, as can be from Recalled Component : observed by visual inspection of the chamber. On recalled components, when looking through the cage bolt hole, a mis-aligned spring and
The information contained in this report was submitted pursuant to 49 CFR §573
Part 573 Safety Recall Report
21V-328 Page3
pressure plate can be seen by the hole in the pressure plate not lining up with the cage bolt hole. Identify How/When Recall Condition NR was Corrected in Production :
Recall Schedule : Description of Recall Schedule : notifications will be mailed within 60 days
Planned Dealer Notification Date : JUL 09, 2021 - JUL 09, 2021 Planned Owner Notification Date : JUL 09, 2021 - JUL 09, 2021
* NR - Not Reported
The information contained in this report was submitted pursuant to 49 CFR §573
Ansley, Alexander (NHTSA) Adobe Experience Manager forms output