EVAL-ADPD144RIZ-SF (Rev. 0)

optical sensors, optical sensing devices, optical mixed signal devices, optimal heart rate,

"optical sensors, optical sensing devices, optical mixed signal devices, optimal heart rate, "

Analog Devices, Inc.

EVAL-ADPD144RIZ-SF User Guide

the software package download for instructions on updating the EVAL-ADPDUCZ firmware 16737-002 16737-005 16737-006. UG-1272 EVAL-ADPD144RIZ-SF User Guide Rev. 0 | Page 4 of 10 ACQUIRING DATA RUNNING THE APPLICATIONS WAVETOOL To start the Applications Wavetool, navigate to the Start

the software package download for instructions on updating the EVAL-ADPDUCZ firmware 16737-002 16737-005 16737-006. UG-1272 EVAL-ADPD144RIZ-SF User Guide

Current View
EVAL-ADPD144RIZ-SF-UG-1272
EVAL-ADPD144RIZ-SF User Guide
UG-1272
One Technology Way · P.O. Box 9106 · Norwood, MA 02062-9106, U.S.A. · Tel: 781.329.4700 · Fax: 781.461.3113 · www.analog.com

Evaluating the ADPD144RI PPG Optical Sensor Module with Integrated Red/IR Emitters and AFE

FEATURES

GENERAL DESCRIPTION

Supports the detection of UART UDP transfer capability ADPD144RI full configuration
Register level High level Graph view Time graph Frequency graph
EVALUATION KIT CONTENTS
EVAL-ADPD144RIZ-SF evaluation boards
ADDITIONAL EQUIPMENT NEEDED
PC running Windows® 7 or Windows 10 operating system EVAL-ADPDUCZ microcontroller board
ONLINE RESOURCES
ADPD144RI data sheet Applications Wavetool software package

The EVAL-ADPD144RIZ-SF provides users with a means of evaluating the ADPD144RI, a complete photometric system designed to measure optical signals from ambient light and from synchronous, reflected light emitting diode (LED) pulses. The evaluation system includes the Applications Wavetool graphical user interface (GUI), which provides users with low level and high level configurability; real-time frequency and time domain analysis; and a user datagram protocol (UDP) transfer capability so that the evaluation board can easily connect to the user development system.
The EVAL-ADPD144RIZ-SF is a multiboard evaluation kit consisting of an adapter board and a sensor board connected by a 3 foot cable. The adapter board connects to the EVALADPDUCZ microcontroller board through a ribbon cable.
The evaluation board is optimized for ear-based photoplethysmography (PPG) measurements.
For additional information on the functionality of the ADPD144RI, see the ADPD144RI data sheet in conjunction with this user guide when using the EVAL-ADPD144RIZ-SF.

EVAL-ADPD144RIZ-SF EVALUATION KIT PHOTOGRAPH

16737-001

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS.

Figure 1. Rev. 0 | Page 1 of 10

UG-1272
TABLE OF CONTENTS
Features .............................................................................................. 1 Evaluation Kit Contents................................................................... 1 Additional Equipment Needed ....................................................... 1 Online Resources .............................................................................. 1 General Description ......................................................................... 1 EVAL-ADPD144RIZ-SF Evaluation Kit Photograph .................. 1 Revision History ............................................................................... 2 Getting Started .................................................................................. 3
Installing the Applications Wavetool ......................................... 3 Connecting the EVAL-ADPDUCZ Microcontroller Board and the EVAL-ADPD144RIZ-SF................................................ 3
REVISION HISTORY
2/2019--Revision 0: Initial Version

EVAL-ADPD144RIZ-SF User Guide
Checking the USB Serial Connection in Windows ..................3 Updating the EVAL-ADPDDUCZ Firmware............................3 Acquiring Data...................................................................................4 Running the Applications Wavetool.............................................4 USB UART Connection................................................................4 Selecting the Proper View ............................................................4 Load Configuration ......................................................................4 Optimizing and Running the ADPD144RI ...............................5 Evaluation Board Schematics and Artwork...................................6

Rev. 0 | Page 2 of 10

EVAL-ADPD144RIZ-SF User Guide
GETTING STARTED
INSTALLING THE APPLICATIONS WAVETOOL
Download the Applications Wavetool software package from the EVAL-ADPD144RIZ-SF product page. Unzip the folder and run the Applications Wavetool executable file. Follow the prompts, beginning with the Applications Wavetool Setup window shown in Figure 2 for software installation. The Applications Wavetool is periodically updated to add features and improve performance. It is recommended that customers use the latest revision to take advantage of new features and performance.

UG-1272
CHECKING THE USB SERIAL CONNECTION IN WINDOWS
Ensure that the communications port (COM port) driver is installed correctly. To verify proper installation, go to Control Panel > All Control Panel Items > System > Device Manager, as shown in Figure 3. In this case, the proper COM port choice is USB Serial Port (COM16). The EVAL-ADPDUCZ microcontroller board uses an FT232 USB, universal asynchronous receiver transmitter (UART) IC. If the USB driver does not install properly, refer to the FTDI driver installation guide that corresponds with the operating system in use.

16737-005

Figure 2. Applications Wavetool Setup
CONNECTING THE EVAL-ADPDUCZ MICROCONTROLLER BOARD AND THE EVALADPD144RIZ-SF
Connect the USB cable to the EVAL-ADPDUCZ and the ribbon cable to the EVAL-ADPD144RIZ-SF. Switch the power switch to the ON position.
When the power switch is in the ON position, the LED near the power switch illuminates, indicating that the EVAL-ADPDUCZ microcontroller board is on. When the USB cable is connected to the EVAL-ADPDUCZ, the second LED near the power switch illuminates, indicating that the on-board battery is charging.

16737-002

Figure 3. USB Serial Port in Windows 7
UPDATING THE EVAL-ADPDDUCZ FIRMWARE
The EVAL-ADPDUCZ microcontroller board may have an older version of the firmware installed during manufacturing. If the user receives the message shown in Figure 4 when trying to connect to the Applications Wavetool, the EVAL-ADPDUCZ must be updated.
Figure 4. Firmware Out of Date Warning Prompt
Refer to the Applications Wavetool user guide that is provided in the software package download for instructions on updating the EVAL-ADPDUCZ firmware

16737-006

Rev. 0 | Page 3 of 10

UG-1272
ACQUIRING DATA
RUNNING THE APPLICATIONS WAVETOOL
To start the Applications Wavetool, navigate to the Start menu > Analog Devices > ApplicationsWaveTool and click ApplicationsWavetool.
USB UART CONNECTION
To establish the connection, follow the menu path Connection > Connect > UART Bridge.

EVAL-ADPD144RIZ-SF User Guide
SELECTING THE PROPER VIEW
The ADPD144RI is intended for nonwrist-based PPG measurements. Click the ADPD Device data view (see Figure 6) to open a window that allows the user to run the ADPD144RI device and collect data (see Figure 7).

16616-009 16737-014

Figure 5. UART Connect
Select the proper COM port to connect the Applications Wavetool to the device. If connection via Bluetooth® is required, or if there are any other connection issues, refer to the Applications Wavetool user guide that is provided in the software package download.

Figure 6. Click ADPD Device
LOAD CONFIGURATION
In the upper right corner of the data view window, click ADPD Config to open the ADPD Config window shown in Figure 7. Click Load DCFG to choose a configuration file. For PPG measurements, choose the 144RI_earbud.dcfg configuration file.

16737-015

Figure 7. ADPD Config View Rev. 0 | Page 4 of 10

EVAL-ADPD144RIZ-SF User Guide
OPTIMIZING AND RUNNING THE ADPD144RI
After the configuration file is loaded, the settings can be further optimized using the ADPD Config window shown in Figure 7. Typically, the device is set up under a certain set of conditions, such as measuring the response from a fixed reflector or measuring a PPG signal from the ear (see Figure 8). Settings can be optimized for any set of conditions by manipulating LED drive currents, transimpedance amplifier (TIA) gain, and

UG-1272
analog front end (AFE) timing. Another option is to use different operating modes that can be more optimal for a specific set of conditions, such as using float mode for a low current transfer ratio (CTR). For information on optimization of the ADPD144RI, refer to the ADPD144RI data sheet. For functional descriptions of the Applications Wavetool, refer to the Applications Wavetool user guide provided in the software package download.

16737-016

Figure 8. Example of a PPG Signal

Rev. 0 | Page 5 of 10

UG-1272

EVALUATION BOARD SCHEMATICS AND ARTWORK

CONNECTOR 1 (TO DAUGHTER)

CONNECTOR 1 (FROM DAUGHTER)

Figure 9. EVAL-ADPD144RIZ-SF BR-048862 Schematic Rev. 0 | Page 6 of 10

AGND

VLDO1/IOVDD VLDO2 VBOOST
CONN1_WAKE1/P1_0 CONN1_SPI1_CS1/RTC1_OPC1/P2_11 CONN1_SPI1_CLK/P1_6 CONN1_SPI1_MISO/P1_8 CONN1_ADC0_VIN1/P2_4 CONN1_SPI1_CS3/P1_10

P3
1 3 5 7 9 11 13 15 17 19

AGND

VLDO1/IOVDD VOUT__ACT VBOOST
CONN1_I2C_SDA/P0_5 CONN1_I2C_SCL/P0_ CONN1_TMR0_OUT/P014 CONN1_WAKE0/P0_15 CONN1_SPI1_CS0/P1_9 CONN1_SPI1_MOSI/P1_7

P3
2 4 6 8 10 12 14 16 18 20

VLDO2 VOUT__ACT
VOUT_CON1

JP1
A COM B

3PIN_JUMPER

MB_VLDO1/IOVDD MB_VLDO2 MB_VBOOST

AGND

J_CONN1_WAKE1/P1_0 J_CONN1_SPI1_CS1/P2_11 CONN1_SPI1_CLK/P1_6 CONN1_SPI1_MISO/P1_8 J_CONN1_ADC0_VIN1/P2_4 J_CONN1_SPI1_CS3/P1_10

P1
2 4 6 8 10 12 14 16 18 20

AGND

MB_VLDO1/IOVDD VOUT_CON1 MB_VBOOST
CONN1_I2C_SDA/P0_5 CONN1_I2C_SCL/P0_4 J_CONN1_TMR0_OUT/P0_14 J_CONN1_WAKE0/P0_15 J_CONN1_SPI1_CS0/P1_ CONN1_SPI1_MOSI/P1_7

P1
1 3 5 7 9 11 13 15 17 19

DF40C-20DP-0.4V(51)

DF40C-20DP-0.4V(51)

SAME NAMES AS GLUE MOTHERBOARD

EEPROM MEMORY

CONN1_I2C_SCL/P0_4

VLDO2

U10 VCC SCL SDA VSS

CONN1_I2C_SDA/P0_5

M24C16-DFCU6TP/K

AGND

P2 2 4 6 8 10 12 14 16 18 20
DF40C-20DP-0.4V(51)

P2 1 3 5 7 9 11 13 15 17 19
DF40C-20DP-0.4V(51)

I2C_SDA/P0_5 I2C_SCL/P0_4

DF40C-20DP-0.4V(51)

R29

CONN1_I2C_SDA/P0_5

0 DNI

R30

CONN1_I2C_SCL/P0_4

0 DNI

PW1 VLDO1/IOVDD

PW2

VLDO2

TP1

VLDO1/IOVDD VLDO1/IOVDD

1 2

VLDO2 VBOOST

VOUT_CON1 VBOOST

3 4 5 6

7

AGND

T_CONN1_WAKE1/P1_0 CONN1_I2C_SDA/P0_5
T_CONN1_SPI1_CS1/RTC1_OPC1/P2_11 CONN1_I2C_SCL/P0_4
CONN1_SPI1_CLK/P1_6 T_CONN1_TMR0_OUT/P014
CONN1_SPI1_MISO/P1_8 T_CONN1_WAKE0/P0_15
T_CONN1_ADC0_VIN1/P2_4 T_CONN1_SPI1_CS0/P1_9
T_CONN1_SPI1_CS3/P1_10 CONN1_SPI1_MOSI/P1_7

8 9 10 11 12 13 14 15 16 17 18 19 20

T_CONN1_WAKE1/P1_0

CONN1_WAKE1/P1_0

R12

0

T_CONN1_SPI1_CS1/RTC1_OPC1/P2_11
CONN1_SPI1_CS1/RTC1_OPC1/P2_11 R14 0

T_CONN1_TMR0_OUT/P014

CONN1_TMR0_OUT/P014

R16

0

T_CONN1_WAKE0/P0_15

TSW-110-08-G-D

CONN1_WAKE0/P0_15

R18

1.8V ADJ_VDD PB0 (SEL)
INT

VLDO2 VBOOST
RIBBON_PB0 CONN1_I2C_SDA/P0_5
RIBBON_INT CONN1_SPI1_CLK/P1_6 CONN1_SPI1_MOSI/P1_7

PR1

1

VLDO2

3

VBOOST

5

3.3V VDD_3V

R3

0

7

PB1 (ACC) CONN1_I2C_SCL/P0_4

9

RIBBON_PB1

11

CONN1_SPI1_CS0/P1_9

13

CONN1_SPI1_MISO/P1_8

15

PR1
2 4 6 8 10 12 14 16

0

T_CONN1_WAKE1/P1_0 RIBBON_INT T_CONN1_TMR0_OUT/P014

JP9
A COM B

T_CONN1_ADC0_VIN1/P2_4

CONN1_ADC0_VIN1/P2_4

R20

0

3PIN_JUMPER

T_CONN1_SPI1_CS0/P1_9

FTSH-108-01-L-D-K AGND

FTSH-108-01-L-D-K

CONN1_SPI1_CS0/P1_9

R22

AGND

JP13

0

T_CONN1_WAKE0/P0_15 RIBBON_PB0

JP8
A COM

JP7

T_CONN1_SPI1_CS1/RTC1_OPC1/P2_11 A

RIBBON_PB1

COM

T_CONN1_SPI1_CS0/P1_9

B

T_CONN1_WAKE0/P0_15 RIBBON_INT

A COM B

3PIN_JUMPER

T_CONN1_SPI1_CS3/P1_10

B

CONN1_SPI1_CS3/P1_10

R24

3PIN_JUMPER

3PIN_JUMPER

0

R13

J_CONN1_WAKE1/P1_0

0

R15 J_CONN1_SPI1_CS1/P2_11 0

R17 J_CONN1_TMR0_OUT/P0_14 0
R19 J_CONN1_WAKE0/P0_15 0
R21 J_CONN1_ADC0_VIN1/P2_4 0
R23 J_CONN1_SPI1_CS0/P1_9 0

R25 J_CONN1_SPI1_CS3/P1_10 0

PW3

VBOOST

PW4

PW6 VLD03
PW7

DF40C-20DP-0.4V(51)

JP2 0
JP3 0
JP4 0

MB_VLDO1/IOVDD C1
TBD0805 MB_VLDO2
C2 TBD0805 MB_VBOOST
C3 TBD0805

AGND

JP6

MB_VLD03

0

C6

TBD0805

AGND

RIBBON_PB1

R27

T_CONN1_WAKE0/P0_15

0

EVAL-ADPD144RIZ-SF User Guide

16737-017

EVAL-ADPD144RIZ-SF User Guide

VLED VDD GND SCL SDA INT

VLED VDD
GND_LOCAL SCL SDA INT

VLED

VDD

R1 10k

R2 10k

SCL

SDA

C2 1µF GND_LOCAL

VDD U1

7 10 5

VLED VDD2 VDD1

SCL
SPARE PIN
SPARE PIN

6 VREF 12 SCL
9 LED1/DNC 8 LED2/DNC

SDA INT

2 11

C3 0.01µF
C4 1µF
GND_LOCAL SDA INT

LGND DGND AGND

C1

1 3 4

1µF

ADPD144RI-ACEZ

GND_LOCAL

GND_LOCAL

Figure 10. EVAL-ADPD144RIZ-SF BR-048911 Schematic

16737-018

UG-1272

16737-019

Figure 11. EVAL-ADPD144RIZ-SF BR-048911 Primary Layer

16737-021

Figure 12. EVAL-ADPD144RIZ-SF BR-048911 Secondary Layer Rev. 0 | Page 7 of 10

UG-1272

EVAL-ADPD144RIZ-SF User Guide

16737-020

Figure 13. EVAL-ADPD144RIZ-SF BR-048862 Primary Layer

16737-022

Figure 14. EVAL-ADPD144RIZ-SF BR-048862 Secondary Layer Rev. 0 | Page 8 of 10

EVAL-ADPD144RIZ-SF User Guide

UG-1272

16737-100

Figure 15. EVAL-ADPD144RIZ-SF Connected to the EVAL-ADPDUCZ Microcontroller Board

Rev. 0 | Page 9 of 10

UG-1272 NOTES

EVAL-ADPD144RIZ-SF User Guide

ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the "Evaluation Board"), you are agreeing to be bound by the terms and conditions set forth below ("Agreement") unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you ("Customer") and Analog Devices, Inc. ("ADI"), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term "Third Party"includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants.The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED "AS IS" AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER'S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI'S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2019 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
UG16737-0-2/19(0)
Rev. 0 | Page 10 of 10


Adobe PDF Library 11.0