User Manual for Netgear models including: C3700, C3700v2, N600
January 2021 Set up your modem router with another cable Internet service provider 1. Connect your computer or mobile device to the modem router with WiFi or Ethernet: WiFi: Use the WiFi network name (SSID) and password on the modem router label to connect. Ethernet: Use an Ethernet cable to connect a computer to an Ethernet port on the modem ...
January 2021. Set up your modem router with another cable Internet service provider. 1. Connect your computer or mobile device to the modem router with WiFi ...
account mobile phone number, user name, password, and account number. • Regulatory and LegalCollect this modem router information: The model number, which is C3700v2, and the MAC address and serial number from the modem router label. • If you use Xfinity, download the Xfinity app from the App store or from Google Play™.
Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Customerowned cable devices might not be compatible with certain cable networks. Check with your cable Internet provider to confirm that this NETGEAR cable device is allowed on your cable network. If you are experiencing trouble installing your modem router, contact NETGEAR at 18668748924. Cable Internet Provider Cox Mediacom Optimum Sparklight Spectrum Xfinity Support Contact Information https://www.cox.com/residential/support/home.html https://www.cox.com/activate 18885561193 https://support.mediacomcable.com 1855Mediacom (18556334226) https://www.optimum.net/support/contactus https://install.optimum.com/JointInstall 18778106750 https://support.sparklight.com 18776922253 https://www.spectrum.net/contactus https://activate.spectrum.net 18332676094 https://www.xfinity.com/internetsetup Use the Xfinity app for Xfinity activation and then use the NETGEAR Nighthawk app for router installation. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Section 82093 of the National Electrical Code, which provides guidelines for proper grounding and, in particular, specifies that coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical. © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any nonNETGEAR trademarks are used for reference purposes only. LED Power Downstream Upstream Online 2.4 GHz radio 5 GHz radio Ethernet USB WiFi On/Off button with LED WPS button with LED Description · Green: Power is supplied to the modem router. · Red: Power is cut off due to a thermal error caused by heat. Move the unit to a wellventilated area and power cycle the unit. · Off: No power is supplied to the modem router. · Solid green: One or more downstream channels are locked. · Blinking green: The modem router is scanning for a downstream channel. · Off: No downstream channel is locked. · Solid green: One or more upstream channels are locked. · Blinking green: The modem router is scanning for an upstream channel. · Off: No upstream channel is locked. · Solid green: The modem router is online. · Blinking green: The modem router is synchronizing with the cable provider's cable modem termination system (CMTS). · Off: The modem router is offline. · Solid green: The 2.4 GHz WiFi radio is on. · Blinking green: There is WiFi activity on the 2.4 GHz band. · Off: The 2.4 GHz WiFi radio is off. · Solid green: The 5 GHz WiFi radio is on. · Blinking green: There is WiFi activity on the 5 GHz band: · Off: The 5 GHz WiFi radio is off. · Solid green: A poweredon device is connected to an Ethernet port. · Blinking green: The Ethernet port is sending or receiving traffic. · Off: No device is connected to an Ethernet port. · Solid green: A USB device is connected to the port on the back panel. · Off: No USB device is connected to the port on the back panel. Pressing this button for two seconds turns the WiFi radios on and off. If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you cannot use WiFi to connect to the modem router. This button lets you use WPS to join the WiFi network without typing the WiFi password. The WPS LED blinks during this process and then lights solid. Quick Start N600 WiFi Cable Modem Router Model C3700v2 Download the Nighthawk app to get started For more information about the Nighthawk app, visit Nighthawkapp.com. Set up your modem router and activate your Internet service with the Nighthawk app. If you don't want to use the Nighthawk app, set up your modem router using the instructions in Install using the modem router web interface. Package contents Ethernet cable A sticker on your modem router displays the preset WiFi network name, password, and QR code. Your Preset Wireless Settings WiFi Network Name (SSID): Network Key (Password): Modem router Power adapter Install using the modem router web interface Before you begin: · Collect this cable Internet service provider (ISP) account information: Your account mobile phone number, user name, password, and account number. · Collect this modem router information: The model number, which is C3700v2, and the MAC address and serial number from the modem router label. · If you use Xfinity, download the Xfinity app from the App store or from Google PlayTM. If you already have the Xfinity app, make sure you have updated to the latest version. Connect your modem router 1. Turn off and disconnect existing modems and routers. If you are replacing a modem that is currently connected in your home, unplug the modem and plug the new modem router into the same outlet. 2. Connect a coaxial cable. Use a coaxial cable to connect the coaxial cable connector on the modem router to the cable wall outlet. Make sure the cable is tightly connected. We recommend connecting directly to the cable wall outlet. If you must share the connection, use a 3.5dB (1 to 2) splitter. Coaxial cable Power adapter 3. Connect the power adapter to the modem router and plug the power adapter into an electrical outlet. The startup procedure takes about one minute. When it is complete, the Power LED lights solid green. If the Power LED does not light, make sure that the Power On/Off switch on the back panel is in the On position. 4. Wait for the Online LED to light solid green. This process might take up to ten minutes. When the cable modem comes online, the Online LED stops blinking and lights solid green for at least a minute. Set up and activate your modem router with Xfinity 1. If your current modem is leased from Xfinity, call Xfinity support to remove your leased modem from your Xfinity service. 2. Make sure that your mobile device is using an LTE Internet connection (do not connect to a WiFi network). 3. Open the Xfinity app and sign in with your Xfinity ID. 4. Follow the steps to get online. 5. The activation process takes about five minutes. 6. On your mobile device, launch a web browser and enter routerlogin.net or 192.168.0.1 in the address field. 7. Follow the prompts to: · Agree to the terms and conditions. · Change your modem router's admin credentials and set up security questions. · Review your WiFi network name and password. Set up your modem router with another cable Internet service provider 1. Connect your computer or mobile device to the modem router with WiFi or Ethernet: WiFi: Use the WiFi network name (SSID) and password on the modem router label to connect. Ethernet: Use an Ethernet cable to connect a computer to an Ethernet port on the modem router. (Your computer must have an Ethernet port.) 2. Launch a web browser and enter routerlogin.net or 192.168.0.1 in the address field. 3. Follow the prompts to: · Agree to the terms and conditions. · Change your modem router's admin credentials and set up security questions. · Review your WiFi network name and password. When the Basic Home page displays, you are ready to activate your Internet service. Contact your cable Internet service provider. Regulatory and Legal For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacypolicy. By using this device, you are agreeing to NETGEAR's Terms and Conditions at https://www.netgear.com/about/termsandconditions. If you do not agree, return the device to your place of purchase within your return period. For 6 GHz devices: The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.9257.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR INTERNATIONAL LTD Floor 1, Building 3 University Technology Centre Curraheen Road, Cork, T12EF21, Ireland January 2021
English - NETGEAR Communities
NETGEAR Support | NETGEAR
Router Login & Setup | NETGEAR
Spectrum - Activation Home
Optimum | Internet Self-Install
MediacomCable – Mediacom Communications
cox.com/residential/support/home.html
Optimum Customer Service | Support for Your TV, Phone, and Internet
How To Activate Your Xfinity Internet and Voice Services - Xfinity Support