flameproof box allows manual switching of all the units (max. 300 units) for visual inspection of their operation. • Escape route lighting: 55 lumens, 0.50 wattage. • Space lighting: 540 lumens, 0.95 wattage. Standard Materials • Body: fiberglass reinforced polyester • Diffuser (hinged to body): polycarbonate • Gasket: elastomer
flameproof box allows manual switching of all the units (max. 300 units) for visual inspection of their operation. • Escape route lighting: 55 lumens, 0.50 wattage.
ATXTM FNES LED Series Self-Contained Emergency Lighting Zone 2 - 21 and 22. With Self-Test System ATEX/IECEx: Zone 2 - 21 and 22 II 2 D and II 3 GD IP66/67 - IK10 Applications · Provides adequate lighting and/or visual indication of access and exit routes during an evacuation in a hazardous environment. · Can be installed in hazardous areas designated as Zone 2 21 and 22. · Typical applications include oil refineries, petrochemical plants, pulp, paper mills and silos. Features · Power supply 230 Vac, 50/60 Hz. · 1 hour duration (emergency). · Non-maintained. · Operates in any position. · Battery pack. -- Escape route lighting: 2.4 V - 1.5 Ah (2 cells - Nicd). -- Space lighting: 7.2 V - 2.2 Ah (6 cells - NiMh) - Flameproof. · Open and close using an Allen key (size 10) or a 6 mm flat screwdriver. · Connection to plug-in terminal block via 2 x 5 x 2.5 mm2 (0.003 x 0.008 x 0.004 in2) terminals. · Two M20 clearance holes supplied with one cable gland -- diameter 6.5 to 14.5 mm (0.26 to 0.57 in), one blanking plug and two locknuts. · Charge indicator by green LED (lifetime over 10 years). · Automatic built-in self-test system (SATI) with memorization of tests indicated by LEDs . · Using a microprocessor and an internal clock, the unit will carry out automatic tests. · Weekly test: Lamp check duration 6 seconds. · Quarterly test: Emergency operation and lamp check for 1 hour. · Can be remotely controlled and checked without switching the mains off with remote control unit from Legrand (Catalog Number 03901) or URA (Catalog Number 095448 and 095450) manufacturers. · The remote control unit installed in a safe area or inside a flameproof box allows manual switching of all the units (max. 300 units) for visual inspection of their operation. · Escape route lighting: 55 lumens, 0.50 wattage. · Space lighting: 540 lumens, 0.95 wattage. Standard Materials · Body: fiberglass reinforced polyester · Diffuser (hinged to body): polycarbonate · Gasket: elastomer · Fixing brackets: zinc plated steel, gray painted aluminum or 316 stainless steel · Cable gland and blanking plug: polyamide · Locknut: nickel-plated brass Options · Addressable versions: -- Operates without additional control lines. Communication between units and the control system is realized via mains borne signals that utilize the existing electrical wiring. -- Standard control system capacity: one control system for up to 200 emergency lighting units. FNES LED -- Optional increased control system capacity: booster (repeater unit) is used to increase the length of the network allowing up to 1000 emergency lighting units to be on one control system. This allows for the use of a single computer to centralize the management of the facilities emergency lighting system. For more information, please contact your local sales representative. -- Addressable monitoring software is available, please consult your local sales representative. · Low temperature application, please consult your local sales representative. ATEX/IECEx Certifications and Compliances · Certification Type: FLn -- Gas: Zone 2 Conforming to ATEX 94/9/CE: II 3 G Type of Protection 'nA': Type of Protection 'nA' Type of Protection 'nR' : Ex nR IIC T4 Gc Temperature class: T6 (nA) or T4 (nR) Ambient Temperature: -20 °C to +55 °C (-4°F to +131 °F) -- Dust: Zone 21 Conforming to ATEX 94/9/CE: II 2 D Type of Protection: Ex tD A21 Surface Temperature: T75 °C (T167 °F) Ambient Temperature: -40 °C to +55 °C (-40 °F to +131 °F) -- Dust: Zone 22 Conforming to ATEX 94/9/CE: II 3 D Type of Protection: Ex t IIIC Dc Surface Temperature: T75 °C (T167 °F) Ambient Temperature: -20 °C to +55 °C (-4°F to +131 °F) · CE Declaration of Conformity: 50212 · ATEX Certificate: LCIE 03 ATEX 6072 (Zone 2-22), LCIE 02 ATEX 6067 (Zone 21) · IECEx Certificate: IECEx LCI 04.0021 (Zone 2-22) · Index of Protection according EN/IEC 60529: IP66/67 · Impact Resistance (shock): IK10 · Conforming to NF AEAS EURASEC Certification · EURASEC N° TC RU C-FR.05.B.00912 Other Certification · INMETRO Certificate: BVC11.0815 Related Products · For labels see Labels for Emergency Lighting Units, ATX SelfAdhesive Signaling Labels for Emergency Lighting Units. LED/ATEX/IECEx BULKHEAD Optimum operating temperature for battery is -5 °C to +30 °C (+23 °F to +86 °F). Inmetro certification available on special request only. Contact your local sales representative for more information. 272 Visit our website at www.emerson.com or contact us at (800) 621-1506. © June 2017 ATXTM FNES LED Series Self-Contained Emergency Lighting Zone 2 - 21 and 22. With Self-Test System ATEX/IECEx: Zone 2 - 21 and 22 II 2 D and II 3 GD IP66/67 - IK10 Catalog Numbering Guide FNES Series: FNES - FNES Series Zone 2 and 22: ATEX/IECEx Certified Zone 21: ATEX Certified LED Lamp Type: LED SL U A Cable Entry: A - Armored M20 U - Unarmored M20 N - Unarmored M25 SL - Space Lighting E - Escape Route Lighting Unswitched Version 1 hour duration - Non-maintained - Two Unarmored M20 clearance entries Weight Type Lamp Type Lumen Output kg (lb) Volume dm3 (in3) Space Lighting LED Array 540 lm 7.2 (15.87) 32.3 (1971.1) Escape Route Lighting LED Array 55 lm 7.2 (15.87) 32.3 (1971.1) Options: A - Addressable W - With Switch (Automatic mains cut-off) Catalog Number FNESLEDSLU FNESLEDEU LED/ATEX/IECEx BULKHEAD Visit our website at www.emerson.com or contact us at (800) 621-1506. © June 2017 273 ATXTM FNES LED Series Self-Contained Emergency Lighting Zone 2 - 21 and 22. With Self-Test System ATEX/IECEx: Zone 2 - 21 and 22 II 2 D and II 3 GD IP66/67 - IK10 Accessories Description Half Clamps Brackets - Set of Two Diameter for 1-1/4 to 1-1/2" pole: 42 mm (16.65 in) to 49 mm (1.93 in) Zinc plated steel 316 stainless steel Catalog Number FEHC49Z FEHC49S Diameter for 2" pole: 60 mm (2.36 in) Zinc plated steel 316 stainless steel FEHC60Z FEHC60S M8 Ring Bolts - Set of Two Zinc plated steel FERBM8Z Hinged Brackets - Set of two brackets for adjusting luminaire when wall-mounted Aluminium (gray painted) 316 stainless steel Brackets for Surface Mounting - Set of two Aluminium (gray painted) 316 stainless steel Fixing Brackets - Set of two brackets for ease of surface installation Zinc plated steel 316 stainless steel FEHBA FEHBS FESBA FESBS FEFBZ FEFBS LED/ATEX/IECEx BULKHEAD 274 Visit our website at www.emerson.com or contact us at (800) 621-1506. © June 2017 ATXTM FNES LED Series Self-Contained Emergency Lighting Zone 2 - 21 and 22. With Self-Test System ATEX/IECEx: Zone 2 - 21 and 22 II 2 D and II 3 GD IP66/67 - IK10 Electrical Wiring Diagram Mains PE N L Remote (Optional) -+ (B) (A) U Non-Maintained N Emergency PE Lighting Unit -(B) +(A) LED/ATEX/IECEx BULKHEAD LED Indicator Main Status Switched On Non Maintained Space Lighting Escape Route Lighting Switched Off OFF ON (high lighting power) ON (low lighting power) Battery not Connected or Faulty SATI Main Power ON Space or Escape Route Lighting Addressable OFF ON -- Flashing -- White LED ON -- Flashing -- Amber LED Dimensions in Millimeters (Inches) 400 (15.8) 2 x M8 785 (31.0) 217 (8.54) 145 (5.71) Visit our website at www.emerson.com or contact us at (800) 621-1506. © June 2017 275Adobe InDesign CS6 (Windows) 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www -tools.com)