User Manual for SYNCO models including: G1T, G1L, G1T Microphone Wireless for Smartphone, G1T, Microphone Wireless for Smartphone

Synco WAIR-G1L Synco WAIR-G1L User Manual

Synco WAir-G1L Ultracompact Digital Wireless Microphone WAIR-G1L

User Manual

1 janv. 2022 — If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact.

SYNCO : G1TL by MillionHead มิลเลี่ยนเฮด จำหน่ายอุปกรณ์ บันทึกเสียง เครื่องเสียง ดีเจ ระบบแสง สี เสียง

PDF preview unavailable. Download the PDF instead.

SYNCO G1T G1L User Manual ?v=1634286293
Microphone G1T/ G1L

User Manual

Thank you for choosing SYNCO product. Please read this manual carefully before use and follow all instructions
mentioned herein.

Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment. Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage. Use only a soft and dry cloth for cleaning the product. Malfunction may be caused by dropping, impact of external force. Do not attempt to disassemble the product. Doing so voids warranty. Please have the product checked or repaired by authorized technicians if any malfunctions happened. Failure to follow all the instructions may result in mechanics damage. Warranty does not apply to human errors.
Package List

Product Instruction

TX Transmitter

 External Mic Input  USB-C Port  Power/ Mute  Reset(Help with Eject Pin)  Low Cut

 Pairing  Built-in Mic  Pocket Clip  Pairing/ Muting Indicator  Power Indicator

TX Transmitter x1

RX Receiver (Type-C or Carrying Bag x1 Lightning Connector) x1

Mic Windshield x1

Charging Cable x1

RX Receiver

 Vocal Effects  Pairing/ Gain Control  USB-C Port

 Detachable Connector  3.5mm In-Ear Monitoring Jack  Pairing Indicator

Indicator -- TX Transmitter Pairing/ Muting Indicator

Power Indicator

Slow flashes System unpaired

/

Fast flashes System pairing

/

Keeps on System paired Muting

Fast flashes Low cut on

/

twice

Indicator -- RX Receiver Pairing Indicator

Low battery
/
Stays on when charging and is off after fully charged
/

Slow flashes Fast flashes Keeps on

System unpaired System pairing System paired

/ / Vocal effects on

Operations
TX 1.Power/ Mute
Long Press 3s: turn on/off the system Short Press: mute/unmute the microphone
2.Charging 5V/2A; Please fully charge the product before use with USB-C charging cable.

3.External Mic Input
TRS Mic Only (Note: When using an external mic, please insert it into the mic input properly.)
4.Mic Windshield & Device Installation

TX

5.Reset

Eject Pin

Gently poke the pin into Reset for 3 seconds to restore factory defaults.

6.Low Cut

Short Press: 150Hz Low Cut On Short Press again: Low Cut Off
7.Pairing

Long press for 3s at the same time

TX

RX

The system will pair automatically after power on.

Manual pairing: long press the pairing button on the RX and TX for 3 seconds at the same time

RX 1.Vocal Effects
Short press to switch sound effects: Original Studio FX - KTV FX - Voice Amplification - EDM (Electronic Dance Music) - Baby FX - Male to Female - Female to Male - Monster FX
2.Pairing/ Gain Control
The system will pair automatically after power on. Manual pairing: long press the pairing button on the RX and TX for 3 seconds at the same time

Long press for 3s at the same time

TX

RX

Gain Control: 0-3 Level Each short press increases gain by one level.

3.USB-C Port For charging phone device

4.Detachable Connector
G1T: Type-C connector G1L: Lightning connector Extra Type-C or Lightning connector is available separately to adapt RX to more phone devices.

Type-C connector

Lightning connector

5.3.5mm In-Ear Monitoring Jack
For real-time monitoring mic recording and device's backgrounding with headphones

Specifications TX Transmitter
Wireless Transmission RF Frequency Band Working Distance
Sampling Rate Bit Depth SNR Audio Input RF Output Power Power Requirements Battery Type Charging Port Battery Charging Time

Digital 2.4GHz 2400-2483.5MHz 492ft/150m(LOS area); 164ft/50m(NLOS area) 48KHz 16Bit 75dB 1/8" / 3.5mm TRS Mic Input 20dB 3.3V-4.7V Built-in Lithium Battery, 400mAh USB-C 1.5H

Battery Life Dimensions Material Weight

8H 52×42×16mm ABS 35g

RX Receiver Wireless Transmission RF Frequency Band Working Distance
Sampling Rate Bit Depth Antenna Number of Audio Channels Monitoring Audio Output Gain Power Requirements Dimensions Material Weight

Digital 2.4GHz 2400-2483.5MHz 492ft/150m(LOS area); 164ft/50m(NLOS area) 48KHz 16Bit Built-in 2 3.5mm In-Ear Monitoring Lightning or Type-C Output 0-3 Level 5V 1A 55X31X13mm ABS 12g

Microphone
Form Factor Sound Field Polar Pattern Frequency Range Sensitivity Maximum SPL

Built-in Mic Mono Omnidirectional 50-20KHz -42dB (±3dB, re 1V/Pa at 1KHz) 110dB SPL (at 1KHz)

Warranty
Warranty Period Thank you for purchasing SYNCO products. 1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product. 2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its operation specification
Artificial damage, e.g. crash, squeeze, scratch, or soaking Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off All consumable accessory attached to a product, like cable, wind muff, battery Faults as a result of force majeure, such as fire, flood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO's customer service through email at support@syncoaudio. com. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided. If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

Guangzhou Zhiying Technology Co., Ltd
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000 support@syncoaudio.com www.syncoaudio.com https://www.facebook.com/syncomicrophones

WARRANTY CERTIFICATE
Please register your warranty. Meanwhile, you are welcomed to contact us via Emailsupport@syncoaudio.com

Customer Name:

USER INFORMATION

Phone Number: Email:

Address:

Sales Date:

SALES INFORMATION

Model: Product Code:

Dealer:

REPAIR RECORD

Service Date: Technician: Issue:

RESULT

Solved

Unsolved

Returned(Replaced)


Adobe PDF Library 15.0 Adobe InDesign CC 14.0 (Windows)