Motorola Motorolah500syn1290 C User Manual 781e1883 Bdf5 Cfc4 6df6 007781a4312a
User Manual: motorola motorolah500syn1290 Motorola Headphones H500 User Guide |
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
BEFORE YOU BEGIN 1 Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809494A56-A If you need more help, contact us at 1-877-MOTOBLU. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. Bluetooth Link > Setup. the headset. Call Button The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off. Blue Indicator Light 2 Unplug the charger from the headset. Microphone Note: Headset is not functional while charging. PAIR PAIR Your Headset Your Phone Step A - PUT HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu ) > Settings > Connection > 1 Select M( Bluetooth Link > Handsfree > Look for Devices. Call Button Blue Indicator Light 1 With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) 2 If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step 1. Note: To turn off headset, see "Turning On and Off" on the reverse side of this guide. Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. (Menu ) > Settings > Connection > 1 Select M( 1 Plug the Motorola charger into the end of 3 START BLUETOOTH Feature For most Motorola phones: Volume Buttons Get Connected in 4 Quick Steps 1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE Charge your headset's battery for 2 hours: Take a moment before you get started to familiarize yourself with your new H500 Handsfree Headset. Earhook 2 On Your Phone Start Here > > > H500 Bluetooth® Handsfree Headset CHARGE Your Headset's Battery The phone lists all Bluetooth devices it finds. Select Motorola H500. 2 Scroll to Power. 3 Press Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. 2 3 Press OK or Yes to pair (link) the handsfree 2 On your phone, dial the number you want 4 3 If your phone and headset are successfully device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. to call and press the Send key. paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support USING YOUR H500 See Features and Functions Guide on the reverse side of this guide for information on using your H500. Features and Functions Guide H500 Bluetooth® Handsfree Headset IMPORTANT: Be sure to first follow the WEARING THE HEADSET TURNING ON AND OFF To turn your headset on, press and hold the Call button until the indicator light flashes. Then, release the button. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. 2 Loop the earhook over your ear. If you change your headset to wear on the other ear, you can also change the orientation of the volume buttons. 3 Press the headset to your ear. 1 Open the earhook 90 1 Turn the headset power off. SUPPORT If you need more help, contact us at 1-877-MOTOBLU. 040059o degrees from the headset. 2 Press the Call button and the volume 2 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it. Call Button FOR MORE INFORMATION ON USING YOUR MOTOROLA H500 Visit us at www.hellomoto.com/bluetooth and click Support. 1 Open Earhook button you want to assign as the "volume up" button until the indicator light flashes twice. 2 Pull Earhook Up The headset power turns on. 4 MAKING CALLS CONTINUED The indicator light provides information about your headset status. Action Function Action Make a voice dial call Tap the Call button and speak the name after the tone Toggle between two active calls Press and hold the Call button End a call Tap the Call button Join a 3-way call Press and hold both Volume buttons Receive a call Tap the Call button Reject a call Press and hold the Call button until you hear a beep Put an active call on hold or resume a call on hold Press and hold the Call button until you hear a beep Transfer a call from the phone to the headset Tap the Call button Disable or enable the indicator light Press and hold both Volume buttons for 3 to 4 seconds Headset Indicator Off On (steady) 10 rapid flashes Slow pulse Mute or unmute a call Tap both Volume buttons Quick flash Answer a second incoming call Press and hold the Call button (places first call on hold) Note: Your H500 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: Some features are phone/network dependent. Hinge Pin INDICATOR LIGHTS Function Press and hold the Call button until you hear a beep Call Button earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin. 3 Redial last call Volume Buttons 3 Flip the headset over. 4 Hook the bottom of the MAKING CALLS CHANGING VOLUME BUTTON ORIENTATION You can wear your H500 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Open the earhook. To conserve battery power, turn off your headset when you don't plan to use it for a while. Quick Start Guide on the reverse side of this guide to complete initial setup of your H500. CHANGING FOR USE ON OTHER EAR With the Charger Plugged In Headset Indicator Headset Status On (steady) Charging Off Charging complete With No Charger Plugged In Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call) Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. AUDIO TONES The audio tones provide information about your headset status. Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute enabled
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.5 Linearized : Yes Page Count : 2 Creator : Adobe Illustrator(R) 10.0 For : Rick Lazier, Harbor Light Communications, Inc. Title : C:\Harbor Light Communications\Projects\MOT\Work Files\H500\H500_Files\Latest\9494a56a_Front.eps Create Date : 9/15/2005 3:38 PM Bounding Box : -79 -604 1057 8 Container Version : 9 Creator Version : 10 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:fb68c2ff-0302-42b3-87c5-a0b258f72292 Producer : Adobe PDF library 5.00 Modify Date : 2005:09:26 12:52:06-04:00 Creator Tool : Adobe Illustrator 10.0 Metadata Date : 2005:09:26 12:52:06-04:00 Document ID : uuid:5ae75cb3-550d-4a58-93c9-893ba769e4c1 Instance ID : uuid:6fff474d-60f7-4d22-a99b-ad2c0c192104 Format : application/pdfEXIF Metadata provided by EXIF.tools