myAudeo 8081 Listening System User Manual Instruction Manual TruWave v05

myAudeo Co., Ltd Listening System Instruction Manual TruWave v05

User Manual

Product : Website : www.myaudeo.comPATENT PENDINGDesigned by myAudeoTMAssembled in ChinaInstruction Manualwww.myaudeo.comModel: 8081Cover v.01Back4.125in5.5inTMAudmyeoTMTo prevent possible hearing damage, do not listen at high volume levels for long periods.Listening System
ContentsWhat’s in the box  02myAudeoTM Overview  03-04myAudeoTM Set-up  Step 1: Charging myAudeoTM   05 Step 2: Base Unit placement 06 Step 3: Connecting to a media source 07 Step 4: Switching between Media and     Ambient Sound modes 08-09  LED light guide  10 Connecting more than one Receiver Unit  to the Base Unit 11Safety Instructions  12Specification  13What’s in the boxBase UnitReceiver UnitPower Converter USB Cable RCA CableHeadphonesInstruction Manual3.5mm socketP.02TMTM
Base Unit Receiver Unit① Power Button② LED Indicator③ USB Outlet  ④ Power Input  ⑤ RCA Input (Analog)  ⑥ Power Button⑦ Power Indicator⑧ Headphone Jack⑨ Sound Mode Indicator⑩ Volume +/- ⑪ EQ Selector⑫ Microphone⑬ Mini-USB PortP.03 P.04④⑤⑥⑧⑦⑩⑨⑪⑫TM⑬①②③TMmyAudeoTM Overview
  P.05 P.06④myAudeoTM Set-upStep 1: Charging myAudeoTM Step 1A: Plug the power converter into an electrical outletStep 1B: Plug the AC adapter into the power input port in the base unitStep 1C: When using for the first time, plug the Receiver Unit into the mini-USB on the Base Unit and charge for at least 3 hours.  Is it finished charging?The RED LED Power Indicator on the Receiver Unit will display the charging status.Charging ON Fully Charged  OFF Low Battery FlashingPower Indicator – RED LEDStep 2: Base Unit PlacementPlace the the Base Unit near your sound source. myAudeoTM uses wireless transmission with a range up to 10 meters. In media sound mode, this will allow you to walk out of the room and still be able to hear sound from your media source. Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls etc, as this can decrease the transmitter's range.Room 2Room 1Up to 10MTM⑧TM
P.07 P.08⑩TMRadio 1Step 4: Switching between Media and   Ambient Sound ModesStep 3: Connecting to the   Media SourceRCA: Plug the audio cord in to the Audio Out ports on the back of the TVFor devices with a 3.5mm audio socket (radio, personal computer, smart phones and tablets), plug the RCA audio cable into the 3.5mm socket and plug the 3.5mm socket into the 3.5mm audio socket on your sound source. Step 4A: Turn ON the  Receiver Unit by pressing the Power  button for 3 secondsAre you in media or Ambient sound mode?The GREEN LED light on the Receiver Unit will Indicate the mode TVSound ModeIndicator - GREEN LED  TV mode  ONAmbient modeFlash once every 2 secondsStep 4B: Switch between media      and ambient sound     mode by pressing the Power button onceTMTM
  ⑩LED Light Guide Step 4C: Adjust the volume up by turning the volume dial clockwise (towards “+”).Adjust the volume down by turning the volume dial counter clockwise (towards “-”).Step 4D: Use the EQ dial to select a custom-ized listening experienceWhat does the EQ function do?EQ (or equalizer) adjusts sound frequencies to cater to different listening environments.Four EQ settings have been preset  on your myAudeoTM device.⑧TV Mode  Ambient Mode EQ1  Normal  General  EQ2  Bass  Silence EQ3  Pop  Outdoor  EQ4  Rock  Directional P.09 P.10Power Indicator - RED LEDCharging ON Fully Charged OFF Low Battery FlashingSound Mode Indicator - GREEN LED  TV mode  ONAmbient mode Flash once every 2 secondsBase Unit – GREEN LEDPairing in ProgressFlashingPairing OK ONPairing not SuccessfulFlash once every 1 second⑪⑫TMTMTMTM
TVP.11 P.12  Safety Instructions• The myAudeoTM is not a hearing aid and is not intended    to diagnose, treat, cure or alter the structure or    function of the body. The myAudeoTM will not restore    normal hearing and will not prevent or improve a    hearing impairment resulting from organic conditions.• To prevent possible hearing loss, do not listen at    high volume levels for prolonged periods of time.• Only use myAudeoTM under normal working conditons,     which are :  •Temperature: 0℃-38 ℃ •Humidity: ≦80%• The  myAudeoTM after packaging can be used in general   shipping method, but should be not exposure to the   sun, rain, moisture, snow or damage. The shipping    & storage temperature is -10℃-38 ℃ and relative    humidity is ≦85%.• Use the system with care and set it up in a clean,    dust-free environment.• Do not store over 45℃. The built-in lithium battery    has the risk of explosion.Connecting more than one Receiver Unit to the Base UnitMultiple Receiver Units can be connected to the Base Unit at the same time.   • Switch the Receiver Unit to TV mode.• Plug the Receiver Unit into the mini-USB    on the Base Unit. • The pairing process will be completed    automatically. To confirm pairing is     complete, the Green LED light on the    Base Unit will be ON.  TMTMTMTM
P.13 P.14  ModelModesMultiple UsersTransmission DistanceMicrophonePairing CompatibilitySound InputVolume TuningEQ TuningHeadphoneChargingBattery LifeSound PerformanceNormal Working ConditionsPower SourceStandardsWarranty 8081TV Operating Mode, Ambient Made, Sleep ModeBase Station can be paired with up to 4 myAudeo ReceiversUp to 10 metresYes, built into the myAudeo ReceiverAutomatic pairing with Base StationRCAYesYesCompatible with any headphonesCharge at Base Station or through USB6 hours after a full change of 2.5 hoursLess than 20 ms delayTemperatune: 0℃-38℃Humidity: ≦80%110V - 240V ACCE, FCC2 years SpecificationFCC Information and CopyrightThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1)This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.

Navigation menu