myAudeo 8081 Listening System User Manual Instruction Manual TruWave v05
myAudeo Co., Ltd Listening System Instruction Manual TruWave v05
myAudeo >
User Manual
4.125in TM w w w. m y a u d e o . c o m Product : myAud eo Website : www.myaudeo.com TM Listening System PATENT PENDING Model: Designed by myAudeo Assembled in China 8081 TM 5.5in To prevent possible hearing damage, do not listen at high volume levels for long periods. Instruction Manual Back Cover v.01 Contents What’s in the box What’s in the box 02 myAudeo Overview 03-04 TM Base Unit TM myAudeo Set-up TM Step 1: Charging myAudeo TM 05 Step 2: Base Unit placement 06 Step 3: Connecting to a media source 07 Receiver Unit TM Step 4: Switching between Media and Ambient Sound modes LED light guide 08-09 10 Connecting more than one Receiver Unit to the Base Unit 11 Safety Instructions 12 Specification 13 Power Converter USB Cable RCA Cable Headphones Instruction Manual 3.5mm socket P.02 myAudeo Overview TM Base Unit ③ ① ⑩ Receiver Unit ⑦ ⑧ ⑨ TM ⑥ ⑪ ⑫ TM ② ⑤ ④ ① ② ③ ④ ⑤ P.03 Power Button LED Indicator USB Outlet Power Input RCA Input (Analog) ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑬ Power Button Power Indicator Headphone Jack Sound Mode Indicator Volume +/EQ Selector Microphone Mini-USB Port P.04 myAudeo Set-up TM Step 2: Base Unit Placement Step 1: Charging myAudeo TM Place the the Base Unit near your sound source. Step 1A: myAudeo uses wireless transmission with a range up to 10 meters. In media sound mode, this will allow you to walk out of the room and still be able to hear sound from your media source. TM Plug the power converter into an electrical outlet Step 1B: Plug the AC adapter into the power input port in the base unit ④ TM Step 1C: When using for the first time, plug the Receiver Unit into the mini-USB on the Base Unit and charge for at least 3 hours. Is it finished charging? The RED LED Power Indicator on the Receiver Unit will display the charging status. Room 2 Room 1 Up to 10M ⑧ TM Power Indicator – RED LED Charging ON Fully Charged OFF Low Battery P.05 Flashing Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls etc, as this can decrease the transmitter's range. P.06 Step 3: Connecting to the Media Source TV Step 4: Switching between Media and Ambient Sound Modes RCA: Plug the audio cord in to the Audio Out ports on the back of the TV Step 4A: TM Turn ON the Receiver Unit by pressing the Power button for 3 seconds Step 4B: Radio 1 For devices with a 3.5mm audio socket (radio, personal computer, smart phones and tablets), plug the RCA audio cable into the 3.5mm socket and plug the 3.5mm socket into the 3.5mm audio socket on your sound source. TM Switch between media and ambient sound mode by pressing the Power button once Are you in media or Ambient sound mode? Sound Mode Indicator - GREEN LED P.07 ⑩ The GREEN LED light on the Receiver Unit will Indicate the mode TV mode ON Ambient mode Flash once every 2 seconds TM P.08 Step 4C: Adjust the volume up by turning the volume dial clockwise (towards “+”). Adjust the volume down by turning the volume dial counter clockwise (towards “-”). ⑪ ⑧ LED Light Guide TM Charging ON Fully Charged OFF ⑫ Step 4D: Low Battery Flashing TM ⑩ Use the EQ dial to select a customized listening experience TM What does the EQ function do? TV Mode Sound Mode Indicator - GREEN LED TV mode EQ (or equalizer) adjusts sound frequencies to cater to different listening environments. Four EQ settings have been preset on your myAudeoTM device. Ambient Mode EQ1 Normal General EQ2 Bass Silence EQ3 Pop Outdoor EQ4 Rock Directional P.09 Power Indicator - RED LED TM ON Ambient mode Flash once every 2 seconds Base Unit – GREEN LED Pairing in Progress Flashing Pairing OK ON Pairing not Successful Flash once every 1 second P.10 Connecting more than one Receiver Unit to the Base Unit Safety Instructions • The myAudeo is not a hearing aid and is not intended to diagnose, treat, cure or alter the structure or function of the body. The myAudeo will not restore normal hearing and will not prevent or improve a hearing impairment resulting from organic conditions. • To prevent possible hearing loss, do not listen at high volume levels for prolonged periods of time. • Only use myAudeo under normal working conditons, which are : •Temperature: 0℃-38 ℃ •Humidity: ≦80% • The myAudeo after packaging can be used in general TM TM TM TV TM TM TM TM TM Multiple Receiver Units can be connected to the Base Unit at the same time. • Switch the Receiver Unit to TV mode. • Plug the Receiver Unit into the mini-USB on the Base Unit. • The pairing process will be completed automatically. To confirm pairing is complete, the Green LED light on the Base Unit will be ON. P.11 shipping method, but should be not exposure to the sun, rain, moisture, snow or damage. The shipping & storage temperature is -10℃-38 ℃ and relative humidity is ≦85%. • Use the system with care and set it up in a clean, dust-free environment. • Do not store over 45℃. The built-in lithium battery has the risk of explosion. P.12 Specification FCC Information and Copyright Model 8081 Modes TV Operating Mode, Ambient Made, Sleep Mode pursuant to part 15 of the FCC Rules. Multiple Users Base Station can be paired with up to 4 myAudeo Receivers These limits are designed to provide reasonable protection against harmful interference in a residential Transmission Distance Up to 10 metres Microphone Yes, built into the myAudeo Receiver instructions, may cause harmful interference Pairing Compatibility Automatic pairing with Base Station to radio communications. However, there is no guarantee that interference will not occur in a particular Sound Input RCA Volume Tuning Yes EQ Tuning Yes encouraged to try to correct the interference by one or more of the following measures: Headphone Compatible with any headphones —Reorient or relocate the receiving antenna. Charging Charge at Base Station or through USB Battery Life 6 hours after a full change of 2.5 hours connected. Sound Performance Less than 20 ms delay —Consult the dealer or an experienced radio/TV technician for help. Normal Working Conditions Temperatune: 0℃-38℃ This equipment has been tested and found to comply with the limits for a Class B digital device, installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: Humidity: ≦80% (1)This device may not cause harmful interference, and Power Source 110V - 240V AC (2) this device must accept any interference received, including interference that may Standards CE, FCC Warranty 2 years cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could P.13 void the user's authority to operate the equipment. P.14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c132 79.159284, 2016/04/19-13:13:40 Format : application/pdf Title : Instruction Manual TruWave_v05 Metadata Date : 2016:09:28 16:25:21+08:00 Modify Date : 2016:09:28 16:25:21+08:00 Create Date : 2016:09:28 16:25:21+08:00 Creator Tool : Adobe Illustrator CC 2015.3 (Macintosh) Thumbnail Width : 68 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9964 bytes, use -b option to extract) Instance ID : uuid:6258bfb6-2cd3-bc40-9b29-89c41a1b7c37 Document ID : xmp.did:2c8b6540-ac90-4d7c-bebf-923ee1544c2d Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:3f36c025-d7b7-d540-bb2a-d9defaabfcb3 Derived From Document ID : xmp.did:80716dde-7750-49fc-9405-43087353c34c Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:b13aef8e-ea65-421c-9ab3-720377d4bba3, xmp.iid:2c8b6540-ac90-4d7c-bebf-923ee1544c2d History When : 2016:05:23 15:09:08+08:00, 2016:09:28 16:25:16+08:00 History Software Agent : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2015.3 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : /Users/hung/Desktop/Tru Wave/Instruction Manual TruWave/Website Pictures_logo/psd/DSC_7109.psd Manifest Reference Document ID : adobe:docid:photoshop:a5fd66a6-8a09-1179-80b2-c6f588e1fb80 Manifest Reference Instance ID : xmp.iid:362d8b9d-162c-4344-9284-52c8974043c3 Ingredients File Path : /Users/hung/Desktop/Tru Wave/Instruction Manual TruWave/Website Pictures_logo/psd/DSC_7109.psd Ingredients Document ID : adobe:docid:photoshop:a5fd66a6-8a09-1179-80b2-c6f588e1fb80 Ingredients Instance ID : xmp.iid:362d8b9d-162c-4344-9284-52c8974043c3 Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 297.000083 Max Page Size H : 210.001556 Max Page Size Unit : Millimeters Font Name : ArialMT, ItcEras-Book, CoText-Regular, ItcEras-Medium, ItcEras-Demi, MyriadPro-Semibold, Raleway-Regular, Raleway-Medium, Raleway-SemiBold, Raleway-Bold, AdobeMingStd-Light, AdobeFanHeitiStd-Bold, KozGoPr6N-Regular, KozGoPr6N-Bold, MyriadPro-Regular Font Family : Arial, ITC Eras, Co Text, ITC Eras, ITC Eras, Myriad Pro, Raleway, Raleway, Raleway, Raleway, Adobe 明體 Std, Adobe 繁黑體 Std, 小塚ゴシック Pr6N, 小塚ゴシック Pr6N, Myriad Pro Font Face : Regular, Book, Regular, Medium, Demi, Semibold, Regular, Medium, SemiBold, Bold, L, B, R, B, Regular Font Type : Open Type, Type 1, Open Type, Type 1, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.06, 001.001, Version 2.001, 001.001, 001.001, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 3.000g; ttfautohint (v1.5) -l 8 -r 28 -G 28 -x 14 -D latn -f cyrl -w G -c -X "", Version 3.000g; ttfautohint (v1.5) -l 8 -r 28 -G 28 -x 14 -D latn -f cyrl -w G -c -X "", Version 3.000g; ttfautohint (v1.5) -l 8 -r 28 -G 28 -x 14 -D latn -f cyrl -w G -c -X "", Version 3.000g; ttfautohint (v1.5) -l 8 -r 28 -G 28 -x 14 -D latn -f cyrl -w G -c -X "", Version 6.008;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.008;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.016;PS 6.007;hotconv 1.0.70;makeotf.lib2.5.5900, Version 6.016;PS 6.007;hotconv 1.0.70;makeotf.lib2.5.5900, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : Arial.ttf, ItcEraBoo; ITC Eras, .9732.otf, ItcEraMed; ITC Eras, ItcEraDem; ITC Eras, MyriadPro-Semibold.otf, Raleway-Regular.ttf, Raleway-Medium.ttf, Raleway-SemiBold.ttf, Raleway-Bold.ttf, AdobeMingStd-Light.otf, AdobeFanHeitiStd-Bold.otf, KozGoPr6N-Regular.otf, KozGoPr6N-Bold.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Page Count : 8 Creator : Adobe Illustrator(R) 17.0 For : hung, Bounding Box : -253 -1170 981 3631 Container Version : 9 Creator Version : 20EXIF Metadata provided by EXIF.tools