ooma SENSE001 DECT module User Manual Ooma QSG Door Window Sensor EN 2016 09 28 R4 indd

ooma, Inc. DECT module Ooma QSG Door Window Sensor EN 2016 09 28 R4 indd

Contents

Manual - Door Window Sensor

Quick Start Guide700-0163-100Step 1 Step 2Key Features Additional Information Need Help? Pair Your Sensor Mount Your SensorTo get started, download and install the Ooma Home Monitoring app on your iOS or Android device. The app can be found at: ooma.com/app When the app is installed, log in using your Ooma phone number and My Ooma password. If you forgot your password, reset it at: my.ooma.com Complete the initial setup in the app, and then follow the instructions on your screen to pair your sensor. Status indicator lightPairing buttonMagnet tabTamper sensorMounting plateQuick release buttonStarting pairing modeYour sensor automatically enters pairing mode when you insert the batteries. You can also press and hold the pairing button for ve seconds to start pairing mode. Status indicator light blinks quickly when in this mode. Checking battery levelTap the pairing button to check the battery level. A long ash indicates that the battery is good. A slow blink indicates that the battery is low.Using the included adhesive pads or screws, mount one piece of the sensor onto the moving part of your door or window, and then mount the other onto your door or window frame. These pieces should be mounted so that when the door or window is closed the dots are no more than 3/4 inch apart.Keep the front side of both pieces even with each other if possible.If needed, attach additional risers (included) to raise the height of the magnet tab. 3/4” maximumTop view Support articles www.ooma.com/support User manualswww.ooma.com/userguide Community forum forums.ooma.com Live customer care: 1-888-711-6662 (US) 1-866-929-5552 (Canada) Legal For warranty, safety, and other legal information, visit ooma.com/legal This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Status indicator referencePairing mode Quick red ashesBattery good Long red ashBattery low Short red ashesSoftware update Slow red double ashes1 42 53 6ADDBEEFFGGAAABFEDGOoma-QSG-Door-Window-Sensor_EN 2016-09-28-R4.indd All Pages 9/30/16 9:20 PM

Navigation menu