Panasonic DMC TZ80 Quick Guide For 4K Photo TZ100 TZ101 TZ81 QG EN
User Manual: panasonic DMC-TZ80 - Quick Guide for 4K Photo Free User Guide for Panasonic Camera, Manual - page4
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
ENGLISH Model No. Quick Guide for 4K Photo Digital Camera DMC-TZ100/DMC-TZ101/DMC-TZ80/DMC-TZ81 SQC0348 Catching the best moment with 4K Photo ([4K Burst] / [4K Burst(S/S)] / [4K Pre-Burst]) You can select the desired moment from a burst of 4K photos taken at 30 frames/second and save that moment as a picture of approx. 8 million pixels. 1 Recording 4K Photos 1 Press [ 2 Press ] button to select the recording method and press [MENU/SET] TZ80/TZ81 TZ100/TZ101 [ ] button Shutter button [ ] button Shutter button For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains) [4K Burst] Burst recording is performed while the shutter button is pressed and held. The shutter sound will be heard repeatedly. 1 Press the shutter button halfway 2 Press and hold the shutter button fully for as long as you want to perform recording ● Recording will start approximately 0.5 seconds after you press the shutter button fully. Therefore, press the button fully as soon as possible. ● If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted continuously. ● Continuous recording length: Up to 15 minutes Press and hold Recording is performed For capturing unpredictable photo opportunities (e.g., plants, animals, children) [4K Burst(S/S)] Burst recording starts when the shutter button is pressed and stops when pressed again. Start and stop tones will be heard. 1 Press the shutter button fully 2 Press the shutter button fully again ● If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted continuously. ● Continuous recording length: Up to 15 minutes [4K Pre-Burst] Start (First) Stop (Second) Recording is performed For recording as needed whenever a photo opportunity arises (e.g., the moment when a ball is thrown) Burst recording is performed for approximately 1 second before and after the moment that the shutter button is pressed. The shutter sound will be heard only once. 1 Press the shutter button fully ● In situations where you want to lock focus and exposure, such as when the subject is not at the centre, use [AF/AE LOCK]. ● Recording length: Approximately 2 seconds ■ To cancel the 4K Photo functions: In step 2, select [ Approximately 1 second Recording is performed ]. ● When you perform 4K burst photo recording, a 4K burst file will be saved in the MP4 format. ● Use a UHS Speed Class 3 card. ● When you are using an SDHC memory card, you can continue recording without interruption even if the file exceeds 4 GB, but the motion picture file will be recorded and played back in separate files. If using an SDXC Memory Card, you can record a motion picture in a single file even if the size is greater than 4 GB. ● When recording 4K photos, the angle of view becomes narrower. ● If the surrounding temperature is high, or 4K photos are recorded continuously, or the temperature of the camera rises, [ halfway through to protect the camera. Wait until the camera cools down. ● When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature rises. Select [ ] may be displayed and recording may be stopped ] ([4K Pre-Burst]) only when recording. To record the subject with reduced blur Set mode dial to [ ] TZ100/TZ101 Set the shutter speed by rotating the rear dial TZ80/TZ81 Set the shutter speed by rotating the control dial ● Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster. ● If you increase the shutter speed, the ISO sensitivity becomes higher, which may increase the noise on the screen. Adding markers to select and save pictures ([4K Burst(S/S)] only): When you press the [Fn1] button while recording, you can add a marker. (Up to 40 markers for each recording.) When selecting and saving pictures from a 4K burst file, you can skip to the positions where you added markers. 2 Selecting pictures from 4K burst file and saving 1 Select a 4K burst file on the playback screen, and press ] is displayed on a 4K burst file. ●[ ● The slide view screen for selecting pictures will be displayed. 2 Touch and drag the frames to select the frame you want to save as a picture ● You can display the previous or next 45 frames in slide view by touching [ ]/[ ] ([4K Burst]/[4K Burst(S/S)] only). When a file with long burst time is selected ([4K Burst]/[4K Burst(S/S)] only): Make a rough selection of scenes using the 4K burst playback screen first, and select the desired frame you want to save as a picture using the slide view screen. Press [Fn2] button to display the 4K burst playback screen Press and perform continuous playback ● You can start continuous rewind by pressing . To pause the rewind operation, press again. . To return to continuous playback, press ● You can start fast rewind/forward during continuous playback by pressing On the scene you want to save as a picture, press Press [Fn2] button to display the slide view screen 3 Press [MENU/SET] to save the picture ● The same operation can be performed by touching [ . to stop playback ]. The picture will be saved in JPEG format. Saving a picture by selecting a focus point after recording ([Post Focus]) You can record bursts of photos with the same quality as a 4K photo while automatically changing the focus point. 1 Recording using [Post Focus] 2 Select the focus point and save the picture 1 Press [ ] button to select [ON] and press [MENU/SET] 2 Press 3 Determine the composition and press the shutter 1 On the playback screen, select the image with 4 ● The picture will be saved in JPEG format. button halfway Press the shutter button fully to start recording the [ ] icon and press Select the focus point by touching it 2 3 Touch [ ] to save the picture ■ To cancel [Post Focus]: Select [OFF] in step 2. Layering brighter parts into a single still picture ([Light Composition]) Select multiple frames from 4K burst files recorded in 4K Photo mode that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. Refer to “Basic Operating Instructions” for details.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Creator : . Title : Create Date : 2016:01:20 14:45:44+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Modify Date : 2016:01:20 15:16:32+09:00 Metadata Date : 2016:01:20 15:16:32+09:00 Producer : Acrobat Distiller 10.1.16 (Windows) Document ID : uuid:9c0b5ca5-46cf-4537-a579-f63b8da65430 Instance ID : uuid:daa151c1-02f7-4153-bdbd-e76fb1743131 Page Count : 2 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools