think dig High Tech Solutions OCL2USA Transponder Reader User Manual user guide OCL2

think dig High Tech Solutions GmbH Transponder Reader user guide OCL2

User Manual

User guide External Ordercard Reader 2 _________________________________________________________________________________ User guide External Ordercard Reader 2 (OCL2) General: With the OCL2, you can read the ID of transponder tags with the type: EM4x02 (or compatible type). The final reading distance depends on the kind of transponder tag. The OCL2 is ready for reading the transponder tag, when the LED-light is flashing. If the reading of the transponder was successfully, the light stops flashing (always on). Included items: Together with the OCL2, you have received a power supply unit, a flatcable and a Modular/DSUB9-adapter. Power supply: For the power supply you can use the power supply unit. In case that the OCL2 is connected to an Orderman terminal (slave) on the port COM4, you don´t need the power supply unit. Portdescription: RS232-port: 9600 Baud, 8 Bit, No Parity, 1 Stoppbit. Modular-Jack: Pin1 ... GND Pin2 ... GND Pin3 ... GND Pin4 ... Transmit Data Pin5 ... Receive Data Pin6 ... +15V DSUB9-Adapter: Pin2 ... RXD Receive Data des PC Pin3 ... TXD Transmist Data des PC Pin5 ... GND Safety instructions: • The OCL2 does not contain any parts to be serviced by the user and therefore must not be opened.If opened, the guarantee claim becomes void. • Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate the equipment. © 2007 by think dig High Tech Solutions GmbH Bachstraße 59, 5023 Salzburg – Austria www.orderman.com

Navigation menu