u blox 11 BMD-345 Bluetooth 5 BLE + 802.15.4 module User Manual BMD 340 Datasheet
Rigado, Inc. BMD-345 Bluetooth 5 BLE + 802.15.4 module BMD 340 Datasheet
u blox >
Installation Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3979331 |
| Application ID | X+byDiYCfEeC4Bzoo/J71A== |
| Document Description | Installation Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 75.43kB (942904 bits) |
| Date Submitted | 2018-08-27 00:00:00 |
| Date Available | 2018-08-27 00:00:00 |
| Creation Date | 2018-08-24 17:10:23 |
| Producing Software | Microsoft® Word 2016 |
| Document Lastmod | 2018-08-24 17:10:23 |
| Document Title | BMD-340 Datasheet |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | Rigado, Inc. |
Rigado Inc. 3950 Fairview Industrial Dr. Salem, Oregon 97302 866-6-RIGADO modules@rigado.com www.rigado.com/modules BMD-345 Module for Bluetooth 5 and 802.15.4 The BMD-345 is an advanced, highly flexible, ultra-low power multiprotocol SoM that enables Bluetooth 5 (BLE) and IEEE 802.15.4 (Thread and Zigbee) connectivity for portable, extremely low power embedded systems. With an ARM® Cortex™-M4F CPU, integrated 2.4GHz transceiver, and an integrated antenna, the BMD-345 provides a complete RF solution allowing faster time to market with reduced development costs. Providing full use of the Nordic nRF52840’s capabilities and peripherals, the BMD-345 can power the most demanding applications, all while simplifying designs and reducing BOM costs. The BMD-345 is an ideal solution for designs that require the latest Bluetooth 5 features or 802.15.4 based networking for Thread. Increased integration with built in USB and 5.5V compatible DC/DC supply reduces design complexity and BOM cost, while expanding possible applications. BMD-345 designs are footprint compatible with the BMD-301, providing low-cost flexibility for tiered product lineups. 1. Features • • • • • • • • • • • • • • • • Based on the Nordic nRF52840 SoC Bluetooth 5 Long Range, 2Mbs, and Advertising Extension support Extended range with PA + LNA Support for host board antenna and u.FL IEEE 802.15.4 with Thread and Zigbee support No external components required ARM® Cortex™-M4F 32-bit processor ARM® TrustZone® Cryptocell 310 security True Random Number Generator Serial Wire Debug (SWD) Nordic SoftDevice ready 1MB embedded flash memory 256kB RAM 48 General Purpose I/O Pins -40C to +85 Temperature Range FCC: 2AA9B11 BMD-345-DS V1.0 • • • • • • • • • • • • • • • • 12-bit/200KSPS ADC One Full-Speed USB (12Mbps) Four SPI Master/Slave (8 Mbps) Quad SPI with Execute in Place (XIP) Low power comparator Temperature sensor Two 2-wire Master/Slave (I2C compatible) I2S audio interface Two UARTs (w/ CTS/RTS and DMA) 20 channel CPU independent Programmable Peripheral Interconnect (PPI) Quadrature Demodulator (QDEC) 128-bit AES HW encryption 5 x 32bit, 3 x 24bit Real Timer Counters (RTC) NFC-A tag interface for OOB pairing Dimensions: 15.0 x 10.2 x 1.9mm IC: 12208A-11 Page 1 of 20 BMD-345 Module Datasheet Bluetooth 5 + 802.15.4 July 11, 2018 2. Block Diagram BMD-345 Bluetooth 5 Low Energy SoC Module nRF52840-QIAA 256kB RAM SWD Debug & Programming Accel Address Resolver ARM Cortex-M4F @ 64MHz PA / LNA + RF Swi tch PCB Pad AES CCM Mode Encryption Cloc k Management Watchdog Timer 5V LDO 2.4GHz Radio Multi-protocol AES ECB Balun 1MB Flas h Core LDO 5V DC/DC Buck Regulator Core DC/DC Buck Regulator DC-DC Inductor DC-DC Inductor Real Time Counter x3 SW Interrupts Random Number Gen Timer x5 Memory Watch Unit ARM CryptoCell TWI Master x2 SPI Master x4 UART x2 I2S TWI Slave x2 SPI Slave x3 PWM x4 PDM TWI Slave x2 QSPI Master w/XIP Bulk Capacitors Programmable Peripheral Interconnect Temperature Sensor GPIO Task Event Blocks Low Power Comparator Quadrature Decoder General Purpose Comparator NFC Tag 8-ch 12-bit ADC Mat chi ng Network u.FL Connector USB2.0 Decoupling Capacitors GPIO x48 (Analog x8) 32 MHz Crystal Figure 1 – Block Diagram BMD-345-DS V1.0 Page 2 of 20 Table of Contents 1. 2. 3. 4. 4.1 4.2 4.2.1 4.3 5. 5.1 5.2 5.3 5.3.1 5.4 5.5 5.6 5.7 6. 6.1 6.2 6.2.1 6.3 6.4 7. 7.1 7.2 8. 9. 9.1 9.2 10. 11. 11.1 11.2 11.3 11.4 11.5 11.6 12. 12.1 13. 13.1 13.2 13.3 14. 15. 16. FEATURES...............................................................................................................................................................................1 BLOCK DIAGRAM ....................................................................................................................................................................2 QUICK SPECIFICATIONS ..........................................................................................................................................................5 PIN DESCRIPTIONS .................................................................................................................................................................6 BMD-345 ....................................................................................................................................................................................... 6 PERIPHERAL PINS ............................................................................................................................................................................... 8 BMD-301 to BMD-345 Pad Differences ...................................................................................................................................... 8 BMD-345 FANOUT EXAMPLE .................................................................................................................. ERROR! BOOKMARK NOT DEFINED. ELECTRICAL SPECIFICATIONS ..................................................................................................................................................9 ABSOLUTE MAXIMUM RATINGS............................................................................................................................................................. 9 OPERATING CONDITIONS ..................................................................................................................................................................... 9 POWER CONFIGURATION ................................................................................................................................................................... 10 USB Power ................................................................................................................................................................................ 10 GENERAL PURPOSE I/O ..................................................................................................................................................................... 10 MODULE RESET ............................................................................................................................................................................. 10 DEBUG & PROGRAMMING ................................................................................................................................................................. 10 CLOCKS .......................................................................................................................................................................................... 11 FIRMWARE ......................................................................................................................... ERROR! BOOKMARK NOT DEFINED. FACTORY IMAGE .................................................................................................................................... ERROR! BOOKMARK NOT DEFINED. SOFTDEVICES ........................................................................................................................................ ERROR! BOOKMARK NOT DEFINED. S140 .............................................................................................................................................. Error! Bookmark not defined. IEEE 802.15.4 (THREAD AND ZIGBEE) ...................................................................................................... ERROR! BOOKMARK NOT DEFINED. MAC ADDRESS INFO ........................................................................................................................................................................ 12 MECHANICAL DATA ............................................................................................................ ERROR! BOOKMARK NOT DEFINED. MECHANICAL DIMENSIONS ....................................................................................................................... ERROR! BOOKMARK NOT DEFINED. RECOMMENDED PCB LAND PADS ........................................................................................................................................................ 13 MODULE MARKING ............................................................................................................ ERROR! BOOKMARK NOT DEFINED. RF DESIGN NOTES ............................................................................................................... ERROR! BOOKMARK NOT DEFINED. RECOMMENDED RF LAYOUT & GROUND PLANE ........................................................................................... ERROR! BOOKMARK NOT DEFINED. ANTENNA PATTERNS ............................................................................................................................... ERROR! BOOKMARK NOT DEFINED. BLUETOOTH QUALIFICATION ................................................................................................................................................ 13 REGULATORY STATEMENTS .................................................................................................................................................. 13 FCC STATEMENT: ............................................................................................................................................................................ 13 FCC IMPORTANT NOTES .................................................................................................................................................................... 14 IC STATEMENT: ............................................................................................................................................................................... 16 IC IMPORTANT NOTES ....................................................................................................................................................................... 16 CE REGULATORY .............................................................................................................................................................................. 17 AUSTRALIA / NEW ZEALAND ............................................................................................................................................................... 17 SOLDER REFLOW TEMPERATURE-TIME PROFILE ................................................................................................................... 18 MOISTURE SENSITIVITY LEVEL ............................................................................................................................................................. 18 PACKAGING AND LABELING.................................................................................................................................................. 18 CARRIER TAPE DIMENSIONS ................................................................................................................................................................ 18 REEL PACKAGING ............................................................................................................................................................................. 19 PACKAGING LABEL .................................................................................................................................. ERROR! BOOKMARK NOT DEFINED. CAUTIONS ............................................................................................................................................................................ 19 LIFE SUPPORT POLICY ........................................................................................................................................................... 19 DOCUMENT HISTORY ........................................................................................................................................................... 20 List of Figures FIGURE 1 – BLOCK DIAGRAM ................................................................................................................................................................. 2 FIGURE 2 – BMD-345 PIN OUT (TOP VIEW) ............................................................................................................................................ 6 FIGURE 6 – BMD-340 2 LAYER FANOUT EXAMPLE ...................................................................................... ERROR! BOOKMARK NOT DEFINED. FIGURE 11 – BMD-345 MAC ADDRESS ON LABEL .................................................................................................................................. 12 FIGURE 12 – BMD-345 MODULE DIMENSIONS .......................................................................................... ERROR! BOOKMARK NOT DEFINED. FIGURE 13 – BMD-345/301 DIMENSIONS (TOP VIEW)........................................................................................................................... 13 FIGURE 14 – BMD-345 MODULE MARKING .............................................................................................. ERROR! BOOKMARK NOT DEFINED. FIGURE 15 – BMD-345 RF EXAMPLE BASED ON EVAL BOARD...................................................................... ERROR! BOOKMARK NOT DEFINED. FIGURE 16 – X-Y-Z ANTENNA ORIENTATION ............................................................................................... ERROR! BOOKMARK NOT DEFINED. BMD-345 V1.0 CONFIDENTIAL Page 3 of 20 FIGURE 18 – REFLOW PROFILE FOR LEAD FREE SOLDER ............................................................................................................................. 18 FIGURE 19 - BMD-345 TAPE DIMENSIONS ............................................................................................................................................ 18 FIGURE 20 – REEL PACKAGING ............................................................................................................................................................. 19 FIGURE 21 – PACKAGING LABEL................................................................................................................ ERROR! BOOKMARK NOT DEFINED. List of Tables TABLE 2 – QUICK SPECIFICATIONS ........................................................................................................................................................... 5 TABLE 3 – BMD-345 PIN DESCRIPTIONS ................................................................................................................................................. 7 TABLE 4 – PERIPHERAL PIN OPTIONS ....................................................................................................................................................... 8 TABLE 5 – PERIPHERALS WITH SHARED REGISTERS ...................................................................................................................................... 8 TABLE 6 – BMD-301 TO BMD-345 PAD DIFFERENCES ............................................................................................................................. 9 TABLE 7 – ABSOLUTE MAXIMUM RATINGS ............................................................................................................................................... 9 TABLE 8 – OPERATING CONDITIONS......................................................................................................................................................... 9 TABLE 10 – GPIO .............................................................................................................................................................................. 10 TABLE 11 – 32.768 KHZ CRYSTAL ........................................................................................................................................................ 11 TABLE 12 – 32.768 KHZ OSCILLATOR ................................................................................................................................................... 11 BMD-345 V1.0 CONFIDENTIAL Page 4 of 20 3. Quick Specifications Bluetooth Version 5.0 (Bluetooth Smart) Concurrent Central & Peripheral (S140) Security AES-128 LE connections Up to 20 as Central, 1 as Peripheral, Observer, Broadcaster (S140) IEEE 802.15.4 Thread Stack OpenThread, Thread 1.1 certified Thread Security AES-128, ARM® Cryptocell accelerated Zigbee Stack Zigbee 3.0 (Certification Pending) Radio Frequency 2.402GHz to 2.480GHz Modulations GFSK at 1 Mbps and 2Mbps, QPSK at 250kbps Transmit power +15 dBm Receiver sensitivity -103dBm (2Mbps), -105 dBm (1Mbps), -113 (125ksps BLE), -110 dBm (IEEE 802.15.4) Antenna Integrated Dimensions BMD-345 Length Width Height 15.0 mm ± 0.3mm 10.2 mm ± 0.3mm 1.9 mm ± 0.1mm Hardware Interfaces Power supply Temperature Range SPI Master/Slave x4 Quad SPI x1 UART x2 Two-Wire Master/Slave (I2C) x2 GPIO x48 VDD: 2.0V to 3.6V VBUS: 4.35V to 5.5V (For USB operation) -40 to +85°C I2S x1 PWM x12 PDM x1 USB 2.0 x1 Analog input x8 Certifications Australia / New Zealand FCC part 15 modular certification BMD-345 FCC ID: 2AA9B11 Industry Canada RSS-210 modular certification BMD-345 IC: 12208A-11 EN 60950-1: 2011-01 3.1 (a): Health and Safety of the User EN 301 489-1 V2.1.1& 3.1 (b): Electromagnetic Compatibility EN 301 489-17 V3.1.1 EN 300 328 V2.1.1 3.2: Effective use of spectrum allocated AS/NZS 4268 :2012+AMDT 1:2013, Radio equipment and systems – Short range devices Bluetooth BMD-345 RF-PHY Component (Tested) – DID: D040774; QDID: 114712 FCC IC CE Table 1 – Quick Specifications BMD-345 V1.0 CONFIDENTIAL Page 5 of 20 4. Pin Descriptions 4.1 BMD-345 Figure 2 – BMD-345 Pin out (Top View) Pin 10 11 12 13 14 15 19 20 21 22 23 24 25 26 27 28 31 32 BMD-345 V1.0 Name P0.25 P0.26 P0.27 P0.28 P0.29 P0.30 P0.31 P0.00 P0.01 P0.02 P0.03 P0.04 P0.05 P0.06 P0.07 P0.08 P0.09 P0.10 P0.11 P0.12 P0.13 P0.14 Pin description Direction In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out CONFIDENTIAL Description GPIO GPIO GPIO GPIO/AIN42 GPIO/AIN52 GPIO/AIN62 GPIO/AIN72 GPIO/XTAL1 (32.768kHz) GPIO/XTAL2 (32.768kHz) GPIO/AIN02 GPIO/AIN12 GPIO/AIN2 GPIO/AIN3 GPIO GPIO/TRACECLK GPIO GPIO/NFC12 GPIO/NFC22 GPIO/TRACEDATA[2] GPIO/TRACEDATA[1] GPIO GPIO Page 6 of 20 Pin 33 34 35 36 37 38 39 40 41 42 43 44 48 49 50 51 52 53 54 56 57 58 59 60 61 62 63 64 67 68 Name P0.15 P0.16 P0.17 P0.21 P0.19 P0.20 P0.18 P0.22 P0.23 P0.24 SWCLK SWDIO P1.05 P1.06 P1.07 P1.08 P1.09 P1.10 P1.11 P1.00 P1.01 P1.02 P1.03 P1.04 P1.12 P1.13 P1.14 P1.15 USB-DUSB-D+ Direction In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In In/Out Out Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out Out In/Out Out In/Out In/Out In/Out In/Out In/Out In/Out 66 VBUS Power 17, 65 73 1, 2, 3, 4, 5, 16, 18, 29, 30, 45, 46, 47, 55, 69, 70, 71, 72, 74 VCC1 ANTA Power In/Out RF Port Description GPIO GPIO GPIO GPIO GPIO GPIO ̅̅̅̅̅̅̅̅ GPIO/RESET GPIO GPIO GPIO SWD Clock SWD IO PA_TX_EN PA_RX_EN GPIO2 GPIO GPIO/TRACEDATA[3] GPIO2 GPIO2 GPIO/TRACEDATA[0]/SWO GPIO2 ANT_SEL GPIO2 PA_MODE GPIO2 GPIO2 GPIO2 GPIO2 USB Data USB Data + USB PHY supply: 4.35V to 5.5V in Connect to USB Host device 5V supply Connect to 2.0V to 3.6V DC supply 50Ω RF antenna port GND Power Electrical Ground Note 1: An internal 4.7µF bulk capacitor is included on the module. However, it is good design practice to add additional bulk capacitance as required for your application, i.e. those with heavy GPIO usage and/or current draw. Note 2: These pins are in close proximity to the nRF52 radio power supply and antenna pins. Radio performance parameters, such as sensitivity, may be affected by high frequency digital I/O with large sink/source current on these pins. Nordic recommends using only low frequency, low-drive functions when possible. Note 3: In HV mode, VCC acts as a regulated supply that can power other external devices. The voltage output of VCC can be configured in software but is limited to no more than VCCH-0.3V. In System Off mode VCC can supply no more than 1mA. Table 2 – BMD-345 Pin Descriptions BMD-345 V1.0 CONFIDENTIAL Page 7 of 20 4.2 Peripheral Pins The BMD-345 features a pin muxing system that allows most internal peripherals, such as UART and SPI, to be used on any GPIO pin. This freedom in pin choice enables better optimization of designs and PCB layout. Note that only one peripheral signal can be muxed to a GPIO pin at a time. Some functions are restricted to certain pins due to additional internal circuitry required by the interface. These include: Trace signals, analog inputs, XTAL signals, USB signals, SWD interface, and reset. See Table 3 below for details: Peripheral UART0, UART1 I2C0, I2C1 SPI0, SPI1, SPI2, SPI3 I2S0 QSPI0 PWM0, PWM1, PWM2, PWM3 PDN0 Signal Pin Options All P0.00-P0.31, P1.00-P1.15 ADC, COMP, LPCOMP All NFC Reset Trace SWD 32.768kHz Crystal USB P0.02-P0.05, P0.28-P0.31 (AIN0-AIN7) P0.09 P0.10 P0.18 P0.07 P1.00 P0.12 P0.11 P1.09 SWCLK SWDIO P0.00 P0.01 USB-D+ USB-D- NFC1 NFC2 ̅̅̅̅̅̅̅̅ RESET TRACECLK SWO/TRACEDATA[0] TRACEDATA[1] TRACEDATA[2] TRACEDATA[3] SWD Clock SWD IO XTAL1 XTAL2 USB Data + USB Data - Table 3 – Peripheral Pin Options Note: Some peripherals on the BMD-345 share the same memory location for their registers. This means that only one of these peripherals can be used at a time. It is possible to switch between peripherals that share the same register location by clearing and reinitializing the associated configuration registers. See the Nordic Semiconductor nRF52840 Product Specification for details. Peripheral ID Base Address 0x40003000 0x40004000 Shared Peripherals SPI0 SPI1 I2C0 I2C1 Table 4 – Peripherals with Shared Registers 4.2.1 BMD-301 to BMD-345 Pad Differences Due to changes in the nRF52840 SoC used by the BMD-345, not all functions (such as SWO/TRACE signals) are found on the same pins as on the BMD-301. Particularly of note is the reset pin function which on the BMD-345 is now available on P0.18 instead of P0.21 as on the BMD-301. To maintain pin for pin compatibility of the reset BMD-345 V1.0 CONFIDENTIAL Page 8 of 20 signal, P0.18 and P0.21 have swapped pad locations on the BMD-345 footprint. These differences are detailed in Table 5 below: Pin 39 38 36 34 33 32 23 56 28 27 52 BMD-301 Name P0.21 P0.20 P0.18 P0.16 P0.15 P0.14 P0.07 N/A P0.12 P0.11 N/A BMD-301 Function ̅̅̅̅̅̅̅̅ GPIO/RESET GPIO/TRACECLK GPIO/TRACEDATA[0]/SWO GPIO/TRACEDATA[1] GPIO/TRACEDATA[2] GPIO/TRACEDATA[3] GPIO N/A GPIO GPIO N/A BMD-345 Name P0.18 P0.20 P0.21 P0.16 P0.15 P0.14 P0.07 P1.00 P0.12 P0.11 P1.09 BMD-345 Function ̅̅̅̅̅̅̅̅ GPIO/RESET GPIO GPIO GPIO GPIO GPIO GPIO/TRACECLK GPIO/TRACEDATA[0]/SWO GPIO/TRACEDATA[1] GPIO/TRACEDATA[2] GPIO/TRACEDATA[3] Table 5 – BMD-301 to BMD-345 Pad Differences 5. Electrical Specifications 5.1 Absolute Maximum Ratings Symbol Parameter Min. Max. Unit VCC_MAX Voltage on VCC supply pin -0.3 3.9 VBUS_MAX Voltage on VBUS Supply pin -0.3 5.8 VIO_MAX Voltage on GPIO pins (VCC > 3.6V) -0.3 3.9 VIO_MAX Voltage on GPIO pins (VCC ≤ 3.6V) -0.3 VCC + 0.3V Storage Temperature Range -40 125 °C TS Table 6 – Absolute Maximum Ratings 5.2 Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC_IN VCC operating supply voltage in 2.0 3.0 3.6 VBUS_IN VBUS operating supply voltage in 4.35 5.0 5.5 TR_VCC VCC Supply rise time (0V to 2.0V) 60 ms -40 25 85 °C TA Operating Ambient Temperature Range Table 7 – Operating Conditions BMD-345 V1.0 CONFIDENTIAL Page 9 of 20 5.3 Power Configuration 5.3.1 USB Power The BMD-345 USB PHY is powered by a dedicated, internal LDO regulator that is fed by the VBUS pin (66). This means that applying power to only the VBUS pin will not power the rest of the module. In order for the USB PHY to operate, VBUS must be externally powered. 5.4 General Purpose I/O The general purpose I/O is organized as two ports enabling access and control of the 48 available GPIO pins. The first port allows access of P0.00 to P0.31, similar to the one port available on the BMD-301. The second port, new to the BMD-345, allows access to P1.00 to P1.15. Each GPIO can be accessed individually with the following user configurable features: • Input/output direction • Output drive strength • Internal pull-up and pull-down resistors • Wake-up from high or low level triggers on all pins • Trigger interrupt on all pins • All pins can be used by the PPI task/event system; the maximum number of pins that can be interfaced through the PPI at the same time is limited by the number of GPIOTE channels • All pins can be individually configured to carry serial interface or quadrature demodulator signals Symbol Parameter Min. Typ. Max. Unit VIH Input High Voltage 0.7 x VCC VCC VIL Input Low Voltage VSS 0.3 x VCC VOH Output High Voltage VCC − 0.4 VCC VOL Output Low Voltage VSS VSS + 0.4 RPU Pull-up Resistance 11 13 16 kΩ RPD Pull-down Resistance 11 13 16 kΩ Table 8 – GPIO 5.5 Module RESET GPIO pin P0.18 may be used for a hardware reset. In order to utilize P0.18 as a hardware reset, the UICR registers PSELRESET[0] and PSELRESET[1] must be set alike, to the value of 0x7FFFFFD2. When P0.18 is programmed as ̅̅̅̅̅̅̅̅, the internal pull-up is automatically enabled. Rigado and Nordic example applications and development RESET ̅̅̅̅̅̅̅̅. kits program P0.18 as RESET 5.6 Debug & Programming The BMD-345 supports the two pin Serial Wire Debug (SWD) interface and offers flexible and powerful mechanisms for non-intrusive debugging of program code. Breakpoints, single stepping, and instruction trace capture of code execution flow are part of this support. The BMD-345 also supports ETM and ITM trace. Trace data from the ETM and the ITM is sent to an external debugger via a 4-bit wide parallel trace port. In addition to parallel trace, the TPIU supports serial trace via the Serial Wire Output (SWO) trace protocol. BMD-345 V1.0 CONFIDENTIAL Page 10 of 20 5.7 Clocks The BMD-345 requires two clocks, a high frequency clock and a low frequency clock. The high frequency clock is provided on-module by a high-accuracy 32-MHz crystal as required by the nRF52840 for radio operation. The low frequency clock can be provided internally by an RC oscillator or synthesized from the fast clock; or externally by a 32.768 kHz crystal. An external crystal provides the lowest power consumption and greatest accuracy. Using the internal RC oscillator with calibration provides acceptable performance for BLE applications at a reduced cost and slight increase in power consumption. Note: the ANT protocol requires the use of an external crystal. 32.768 kHz Crystal (LFXO) Symbol Typ. Max. Unit 32.768 kHz Frequency tolerance, BLE applications ±250 ppm CL_LFXO Load Capacitance 12.5 pF C0_LFXO Shunt Capacitance pF RS_LFXO Equivalent series resistance 100 kΩ Input Capacitance on XL1 & XL2 pads pF FNOM_LFXO FTOL_LFXO_BLE Cpin Parameter Crystal frequency Table 9 – 32.768 kHz Crystal 32.768 kHz Oscillator Comparison Symbol Parameter Min. Typ. Max. Unit ILFXO Current for 32.768kHz Crystal Oscillator 0.23 µA ILFRC Current for 32.768kHz RC Oscillator 0.7 µA ILFSYNT Current for 32.768kHz Synthesized Oscillator Frequency Tolerance, 32.768kHz Crystal Oscillator (BLE Stack)1 Frequency Tolerance, 32.768kHz Crystal Oscillator (ANT Stack)1 Frequency Tolerance, 32.768kHz RC Oscillator 100 µA ±250 ppm ±50 ppm ±2 Frequency tolerance, 32.768kHz RC after calibration Frequency Tolerance, 32.768kHz Synthesized Oscillator ±250 ppm ±48 ppm fTOL_LFXO_BLE fTOL_LFXO_ANT f TOL_LFRC fTOL_CAL_LFRC fTOL_LFSYNT Note 1: fTOL_LFXO_BLE and fTOL_LFXO_ANT are the max allowed for BLE and ANT applications. Actual tolerance depends on the crystal used. Table 10 – 32.768 kHz Oscillator BMD-345 V1.0 CONFIDENTIAL Page 11 of 20 5.8 MAC Address Info The BMD-345 modules comes preprogrammed with a unique MAC address from the factory. The MAC address is also printed on a 2D barcode on the top of the module. Figure 3 – BMD-345 MAC Address on Label The 6-byte BLE Radio MAC address is stored in the nRF52840 UICR at NRF_UICR_BASE+0x80 LSB first. Please read the MAC Address Provisioning application note if you are not using the built in bootloader to avoid erasing/overwriting the MAC address during programming. Important: If full memory protection is enabled, the UICR cannot be read via the SWD interface. If performing a full-erase, the MAC can then only be recovered from the 2D barcode and human-readable text. UICR Register: NRF_UICR + 0x80 (0x10001080): MAC_Addr [0] (0xZZ) NRF_UICR + 0x81 (0x10001081): MAC_Addr [1] (0xYY) NRF_UICR + 0x82 (0x10001082): MAC_Addr [2] (0xXX) NRF_UICR + 0x83 (0x10001083): MAC_Addr [3] (0x93) NRF_UICR + 0x84 (0x10001084): MAC_Addr [4] (0x54) NRF_UICR + 0x85 (0x10001085): MAC_Addr [5] (0x94) BMD-345 V1.0 CONFIDENTIAL Page 12 of 20 6. Recommended PCB Land Pads Figure 4 – BMD-345 Dimension (Top View) (All dimensions are in mm) 7. Bluetooth Qualification The BMD-345 Series modules will be qualified as a Bluetooth Component (tested) for RF-PHY. This allows customers to use different SoftDevices that have been qualified by Nordic without the need to complete additional RF-PHY testing. To achieve Bluetooth End Product qualification, the Rigado RF-PHY QDID can be combined with Nordic QDIDs for the SoftDevice used when filing on the Bluetooth SIG website. The only testing required is for the Bluetooth profiles supported by the customer’s product. Products with only custom profiles do not require any additional testing. • BMD-345: RF-PHY Component(Tested) Declaration ID D040774/ QDID 114712 8. Regulatory Statements 8.1 FCC Statement: This device has been tested and found to comply with part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver BMD-345 V1.0 CONFIDENTIAL Page 13 of 20 • • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Operation is subjected to the following two conditions: (1) This device may no cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modification to this product will void the user’s authority to operate this equipment. Note: Modification to this product will void the users’ authority to operate this equipment. 8.2 FCC Important Notes (1) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter should be installed and operated with a minimum distance of 20 centimeters between the radiator and any human body and must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in this document. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user authority to operate the equipment. (2) Co-location Warning: This device and its antenna(s) must not be co-located or operating in conjunction with any other transmitter antenna. (3) OEM integration instructions： This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter must not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as the two (2) conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed (for example, digital device emission, PC peripheral requirements, etc.) In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstance, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. BMD-345 V1.0 CONFIDENTIAL Page 14 of 20 Caution! The OEM is still responsible for verifying end product compliance with FCC Part 15, subpart B limits for unintentional radiators through an accredited test facility. (4) End product labeling： The final end product must be labeled in a visible area with the following: • BMD-345: “Contains FCC ID: 2AA9B11” • Any similar wording that expresses the same meaning may be used. The FCC Statement below should also be included on the label. When not possible, the FCC Statement should be included in the User Manual of the host device. “This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.” (5) Information regarding the end user manual： The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual (Section 15.2(4)). BMD-345 V1.0 CONFIDENTIAL Page 15 of 20 8.3 IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Avertissement d'exposition RF: L'équipement est conforme aux limites d'exposition aux RF établies pour un incontrôlés environnement. L'antenne (s) utilisée pour ce transmetteur ne doit pas être co-localisés ou onctionner en conjonction avec toute autre antenne ou transmetteur . 8.4 IC Important Notes 1. The OEM integrator must be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 2. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multi‐ transmitter product procedures. 3. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two‐ways authentication between module and the host system. 4. The host device shall be properly labelled to identify the module within the host device. The end product must be labeled in a visible area with the following: • BMD-345: “Contains IC: 12208A-11“ Any similar wording that expresses the same meaning may be used. The IC Statement below should also be included on the label. When not possible, the IC Statement should be included in the User Manual of the host device. “This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le onctionnement.” BMD-345 V1.0 CONFIDENTIAL Page 16 of 20 8.5 CE Regulatory The BMD-345 module is being tested and is expected to be compliant against the following standards. OEM integrators should consult with qualified test house to verify all regulatory requirements have been met for their complete device. EU - Radio Equipment Directive 2014/53/EU • ETSI EN 300 328 V 2.1.1 • ETSI EN 301 489-1 V2.1.1 • ETSI EN 301 489-17 V3.1.1 Pending completion of testing, Declarations of Conformity and supporting test reports will be available at www.rigado.com. 8.6 Australia / New Zealand The BMD-345 module is to be tested to comply with the AS/NZS 4268 :2012+AMDT 1:2013, Radio equipment and systems – Short range devices – Limits and methods of measurement. Pending test completion, the report may be downloaded from www.rigado.com, and may be used as evidence in obtaining permission to use the RCM. Information on registration as a Responsible Party, license and labeling requirements may be found at the following websites: Australia: http://www.acma.gov.au/theACMA/radiocommunications-short-range-devices-standard-2004 New Zealand: http://www.rsm.govt.nz/compliance The A-Tick and C-Tick marks are being migrated to the Regulatory Compliance Mark (RCM). Only Australianbased and New Zealand-based companies who are registered may be granted permission to use the RCM. An Australian-based or New Zealand-based agent or importer may also register as a Responsible Party to use the RCM on behalf of a company not in Australia or New Zealand. BMD-345 V1.0 CONFIDENTIAL Page 17 of 20 9. Solder Reflow Temperature-Time Profile Figure 5 – Reflow Profile for Lead Free Solder 9.1 Moisture Sensitivity Level The BMD-345 is rated for MSL 3, 168-hour floor life after opening. 10. Packaging and Labeling 10.1 Carrier Tape Dimensions Figure 6 - BMD-345 Tape Dimensions BMD-345 V1.0 CONFIDENTIAL Page 18 of 20 10.2 Reel Packaging Modules come on 330mm reels loaded with 1000 modules. Each reel is placed in an antistatic bag with a desiccant pack and humidity card and placed in a 340x350x65mm box. On the outside of the bag an antistatic warning and reel label are adhered. Figure 7 – Reel Packaging 11. Cautions 1) The guidelines of this document should be followed in order to assure proper performance of the module. 2) This product is for use in office, business, and residential applications, but not medical devices. 3) This module may short-circuit. If a short circuit can result in serious damage or injury then failsafe precautions should be used. This could be accomplished by redundant systems and protection circuits. 4) Supply voltage to the module should not be higher than the specified inputs or reversed. Additionally, it should not contain noise, spikes, or AC ripple voltage. 5) Avoid use with other high frequency circuits. 6) Use methods to eliminate static electricity when working with the module as it can damage the components. 7) Contact with wires, the enclosure, or any other objects should be avoided. 8) Refer to the recommended pattern when designing for this module. 9) If hand soldering is used, be sure to use the precautions outlined in this document. 10) This module should be kept away from heat, both during storage and after installation. 11) Do not drop or physically shock the module. 12) Do not damage the interface surfaces of the module. 13) The module should not be mechanically stressed at any time (storage, handling, installation). 14) Do not store or expose this module to: • Humid or salty air conditions • High concentrations of corrosive gasses. • Long durations of direct sunlight. • Temperatures lower than -40°C or higher than 125°C. 12. Life Support Policy This product is not designed to be used in a life support device or system, or in applications where there is potential for a failure or malfunction to, directly or indirectly, cause significant injury. By using this product in an application that poses these risks, such as described above, the customer is agreeing to indemnify Rigado for any damages that result. BMD-345 V1.0 CONFIDENTIAL Page 19 of 20 13. Document History Revision Date Changes / Notes 1.0 7/11/2017 Initial Release BMD-345 V1.0 CONFIDENTIAL Page 20 of 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 20 Language : en-US Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Microsoft® Word 2016 Title : BMD-340 Datasheet Creator : Rigado, Inc. Description : BMD-345-DS Creator Tool : Microsoft® Word 2016 Create Date : 2018:08:24 17:10:23-07:00 Modify Date : 2018:08:24 17:10:23-07:00 Document ID : uuid:55BD235F-B8B3-4E44-B910-7E9F57C2A430 Instance ID : uuid:55BD235F-B8B3-4E44-B910-7E9F57C2A430 Author : Rigado, Inc. Subject : BMD-345-DSEXIF Metadata provided by EXIF.tools