zBoost YX240-PCS-CEL Cell Phone Signal Booster User Manual YX240 installation overview ai
zBoost, LLC Cell Phone Signal Booster YX240 installation overview ai
UserManual.wiki
>
zBoost
>
YX240 PCS CEL User Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Installaon Guide Model Number: YX240Technical Support For technical support, warranty issues or return authorizaon, contact Wi-Ex Support between the hours of 8:30 AM and 5:30 PM EST at 1-800-871-1612, email Support@Wi-Ex.com or visit www.Wi-Ex.com. Before calling, locate the serial number on the amplifier unit. The serial number is required for technical support or establish a return authorizaon. FCC InformaonFCC ID: SO4YX240-PCS-CELWarning: Changes or modificaons to this device not expressly approved by Wi-Ex could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If the equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separaon between the equipment and receiver• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for helpThis equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier. In accordance with FCC requirements of human exposure to radio frequency fields, the radiang element (antenna) shall be installed such that a minimum separaon distance of 20cm (8in) is maintained from all persons.Industry Canada RegulaonsCanada IC: 5544A-YX240PCSCELThis Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulaons. Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. The term “IC:” before the radio cerficaon number only signifies that Industry Canada technical specificaons were met.RF Exposure:The manufacturer’s rated output power of this equipment is for single carrier operaon. For situaons when mulple carrier signals are present, the rang would have to be reduced by 3.5 dB, especially where the output is re-radiated and can cause interference to adjacent band users. This power reducon is to be by means of input power or gain reducon and not by an aenuator at the output of the device.Please note: This unit has been approved for use in Canada under RSS 131, however, consent for the use of this device to improve cellular or PCS coverage, must be obtained through your cellular or PCS provider, prior to placing the unit in operaon. Please refer to the Industry Canada document CPC 2-1-05, Secon 6.1 available or viewable at: hp://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf08942e.htmlCet appareillage numérique de la classe [B] répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opéraon est sujee aux deux condions suivantes: (1) ce disposif peut ne pas causer l’interférence nocive, et (2) ce disposif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opéraon peu désirée.Le fabricant nominale de la puissance de sore de ce matériel est simple transporteur. Pour les situaons lorsque plusieurs signaux porteurs sont présents, l’évaluaon devrait être réduite de 3.5 dB, en parculier lorsque le signal de sore est ré-émise et peut provoquer des interférences adjacentes à la bande ulisateurs.Ce pouvoir est de la réducon par le biais de la sore d’alimentaon ou la réducon de gain et non par un aénuateur à la sore du disposif.WARRANTY INFORMATION: Wi-Ex warrants every Wi-Ex product to be free from defects in material and workmanship under normal use for the warranty period of 1 year.Register your zBoost Product at www.Wi-Ex.comWho Is Covered? You must have proof of purchase to receive warranty service. A sales receipt or other documentaon showing the product purchased and the purchase date is considered proof of purchase. This limited warranty extends only to the original consumer purchaser or any person receiving the product as a gi from the original consumer purchaser and to no other purchaser or transferee. This warranty does NOT extend to commercial users.What is Covered? Warranty coverage begins the day you purchase the product. For one year from the original date, the Wi-Ex Cell Phone Signal Booster will be repaired or replaced with a new, repaired, refurbished or comparable product (whichever is deemed necessary by Wi-Ex) if it becomes defecve or inoperave. The exchange will be made without charge to you for parts and labor. You will be responsible for the cost of shipping to the locaon designated by Wi-Ex. If Wi-Ex cannot reasonably repair or replace the unit then Wi-Ex may, at its sole discreon, refund the price you paid for the product. All products, including replacement products, are covered only for the original warranty period. When the warranty on the original product expires, the warranty on the replacement product also expires.What is Excluded? Your warranty does NOT cover:• Labor charges for set up of the unit.• Product replacement because of misuse, accident, lightning damage, unauthorized repair or other cause not within the control of Wi-Ex.• Incidental or consequenal damages resulng from the product. Some states do not allow the exclusion of incidental or consequenal damages, so the above exclusion may not apply to you.• Any modificaons or other changes to the product, including but not limited to soware or hardware modificaons other than as expressly authorized by Wi-Ex will void this warranty.• Product that has been modified or adapted to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modificaons.Make sure you keep… Please keep your sales receipt or other document showing proof of purchase. Aach it to this Setup Overview and keep both nearby. Also, keep the original box and packing material in case you need to return your product.To get warranty service… Warranty service will be provided by Wi-Ex. If you believe you need service for your unit, contact Wi-Ex at 1-800-871-1612 or support@wi-ex.com. A representave will go through a diagnosc checklist with you. If it is determined that the product needs to be returned for service or exchanged, you will receive a return merchandise authorizaon (RMA) number. The representave will give you complete shipping details. Do not return products to Wi-Ex without a Return Authorizaon Number (RMA).To get out of warranty service… To obtain out of warranty service, contact Wi-Ex at 1-800-871-1612 or support@wi-ex.com for informaon on the possibility of any costs for repair or replacement of out-of-warranty products.For quesons or assistance, contact Wi-Ex customer service at 1-800-871-1612 or email Support@Wi-Ex.comThe zBoost zForce YX240 User Guide and addional product informaon is available at www.Wi-Ex.comCUSTOMER SERVICE](https://usermanual.wiki/zBoost/YX240-PCS-CEL/User-Guide-1590689-Page-2.png)