GlobalSat WorldCom TR600 AVL Tracking System User Manual
GlobalSat WorldCom Corporation AVL Tracking System
User Manual
AVL Tracking System TR-600 V0.2 Globalsat Technology Corporation 16F., No. 186, Jian-Yi Road, Chung-Ho City, Taipei Hsien 235, Taiwan Tel: 886.2.8226.3799/ Fax: 886.2.8226.3899 service@globalsat.com.tw www.globalsat.com.tw USGlobalSat Incorporated 1308 John Reed Court, City of Industry, CA 91745 Tel: 626.968.4145 / Fax: 626.968.4373 sales@usglobalsat.com www.usglobalsat.com CONTENT 1. Introduction .......................................................................................................................................3 1.1 Introduction.............................................................................................................................3 1.2 Features ....................................................................................................................................3 1.3 Hardware Architecture ........................................................................................................4 1.4 Hardware specification ........................................................................................................5 1.5 Appearance ..............................................................................................................................6 1.6 LED indicator...........................................................................................................................7 1.7 Cable description ...................................................................................................................8 1.8 Accessories ............................................................................................................................10 2 Operation............................................................................................................................................ 11 2.1 Install the SIM card............................................................................................................ 11 2.2 Install the GPS and GSM antenna ................................................................................12 3 Free Web Service.............................................................................................................................14 3.1 Preparation for Use Website............................................................................................14 3.2 Account creation ..................................................................................................................14 3.3 Account creation ..................................................................................................................18 3.4 Delete device from your account ..................................................................................18 3.5 Set up SOS Parameters ....................................................................................................19 3.6 Set up Digital Output .........................................................................................................20 3.7 TR-600 Motion report.........................................................................................................21 1. Introduction 1.1 Introduction TR-600 is a multi-functional and economical communication platform for vehicle positioning applications. It integrates high sensitivity GPS system and quad-band 850/900/1800/1900 MHz GSM system into a compact mechanism. TR-600 is enclosed into a solid housing for simple installation. It provides real time GPS positions anytime and anywhere in the open sky and offers the precise position and vehicle status to back-end server or controller’s cell phone to handle/ display/ calculate the necessary information. Benefits such as enhanced fleet management, improved vehicle safety, and useful emergency response are accomplished through the implementation of TR-600 system. 1.2 Features y Build in Quad-band 850/900/1800/1900 MHz GSM system y Build in high sensitivity GPS system y Support AT command via SMS/ TCP/UDP y Remote control via SMS/GPRS command y Real-time regular GPS position feedback and vehicle status monitoring y Build in 3 digital outputs, 3 digital inputs, ACC input, 1 analog input, 1 serial port y Power supply for Lion battery and lead-acid battery y Support multi geo-fence function y OTA (On the air) firmware upgrading y Data logger for 50,000 points y Ignition/ Power Low/ Power Lost / Speed Limit detection alarm y 3 LED indicators for GSM, GPS, power status y External panic button for emergency SOS (Option) 1.3 Hardware Architecture GPS antenna GPS GSM antenna CPU GSM MODEM USART/ RS-232 Motion Sensor SOS Li backup Battery Digital input Digital output Analog Input 1.4 Hardware specification Item Description Dimension 98 mm X 65 mm X 22 mm CPU High performance line ARM-base 32-bit MCU GPS receiver SiRF Star III high performance GPS chipset Temperature Operation -30℃ ~ + 80℃ Storage -40℃ ~ + 85℃ GPS Antenna SMA Type connector Active antenna ( 3.3~3.8V) GSM Antenna SMA Type connector Communication Telit (GE865) Quad-band GSM 850/900/1800/1900 MHz Protocol Voice/SMS/GPRS (TCP/UDP/HTTP) Built-in Memory 32 Mb GPS logging capacity 50,000 points Emergency Input Negative trigger Ignition (ACC) Input Positive trigger Digital Input Port Negative trigger Positive trigger Digital Output Port Negative trigger 3 (300 mA) Analog Input Port Analog Input 1( 0~28V) Serial Port 115200 bps Backup battery (Option) Internal 800 mAh Lion battery Support external Lead-acid battery (12V/24V) Temperature sensor (Option) Sensor Motion sensor G-sensor (3-Axis Accelerometer) (Option) Support barcode reader Function (Custom-made) Support NMEA-0183 output for navigation Support RFID reader Support tire pressure monitoring system 1.5 Appearance 10 Peripheral interface port I/O port Power Status LED GPS LED GSM LED For fixing device with screws GSM antenna connector For fixing device with belt GPS antenna connector 10 SIM card holder 1.6 LED indicator Power Status LED (Red) LED Permanently On Slow blinking (Once every 3 seconds) State Main power on, device on No main power function, backup battery on GPS LED (Yellow) LED Permanently off Fast blinking (Once every 1 second) Slow blinking (Once every 3 seconds) State GPS off GPS not fix GPS fix GSM LED (Green) LED Permanently off Fast blinking (Once every 1 second) Slow blinking (Once every 3 seconds) State GSM off 1. TR-600 is registered full service 2. TR-600 is searching GSM network SIM card is registering to GSM network 1.7 Cable description 14 Pin I/O Cable Wire Color Description Green/ White Analog Input_1 White Digital Output 3 (Negative Trigger) Gray Digital Output 1 (Negative Trigger) Purple Digital Input 3 (Positive Trigger) Blue Digital Input 1 (Negative Trigger) Black Ground Red Main Power Green Digital Output 2 (Negative Trigger) Yellow ACC (Positive Trigger) Orange Digital Input 2 (Negative Trigger) Brown SOS (Negative Trigger) Pink 12V/24V Backup Battery Black Ground 8 Pin Cable Wire Color Description Pink Receiver Blue Receiver Red Serial-1_5V White Receiver White Receiver Black (3 Pieces) Ground Orange Receiver Green Transmission 1 1.8 Accessories Main Unit GPS Antenna GSM Antenna 14 Pin I/O Cable RS-232 Cable (Option) 8 Pin Cable CD (User manual, driver) 10 2 Operation For first time users, please follow the steps below to complete the pre-installation. 2.1 Install the SIM card With the cooper contacts face-up, align the notch on the SIM card with the notch on the SIM slot and insert the SIM card. If SIM is inserted correctly, you will not be able to see the copper contacts after inserting the card. To eject SIM card, simply, use your finger nail and apply slight pressure. Note: Refer to your mobile phone manual to disable the SIM PIN entry function by your mobile phone. Note: Before installing or taking out SIM card, please power off TR-600. 11 2.2 Install the GPS and GSM antenna Install the GSM antenna to the GSM antenna connector on the left part of the back side and GPS antenna to the GPS antenna connector on the right part of the back side tightly. Please refer to the photo above. 12 2.3 Install the Emergency button There is a line of the 14 pin IO cable for connecting push button for emergency help. One end of the button must be connected to the SOS line and the other end must be connected to the ground line. SOS line Ground line 13 3 Free Web Service 3.1 Preparation for Use Website • Be certain your SIM card has credit and verify with telecom operator for GPRS activation. Or, you may verify GPRS connectivity by inserting SIM card to the mobile phone. Next, test by utilizing your web browser. • Contact your telecom operator concerning GPRS setting parameters. • Contact your telecom operator to disable voicemail, call waiting, and call forwarding functions to the SIM card. • Disable the SIM PIN entry of the SIM card via mobile phone. • Tracker IMEI and serial number information can be found on the bottom of TR-600. 3.2 Account creation Please turn on your web browser and go to http://traq.gstraq.com/ Next, click the Register hyperlink. Read Agreement, check I Agree, and click Next button. 14 Check the preparation again and click Next button. 圖待網站更新 (目前為 TR-203 與 TR-151) Select your Time Zone, enter Device IMEI and Serial No., select your Country code, enter Device Phone Number, Device Name, and click Next button. Create your login profile by entering User Name, Password, and Email, and click Next button. 15 Please print this page or write down your User Name, Password and click “Click to start Setup” button. Please select your country and telecom operator. Selecting your telecom operator will bring out the concerning GPRS parameters. If you do not find your telecom operator in the pull-down menu or the information in the pull-down menu is incorrect, please click “User Define”. And then please contact your telecom operator about the GPRS parameter. Please click Auto Send SMS button. 16 Please click Send button. 圖待網站更新 (目前為 TR-203 與 TR-151 畫面) 17 3.3 Account creation Perform the following: Setup Æ Add New Device Then please refer to 3.2 Create Account to enter the concerning information of the device After adding the required information and sending out the SMS, you could switch to use separate device by selecting in the Device pull-down menu on the upper right corner of the webpage. 3.4 Delete device from your account Perform the following: Setup Æ Delete Device Please select the device you would like to delete. And then please click Delete Device button. 18 3.5 Set up SOS Parameters SOS Phone Number 1. Perform the following: Setup Æ Setup SOS Number 2. Enter destination phone number to receive emergency SMS. 3. Please click Send button. 4. Next, go to Setup SOS Other Parameter SOS Time Zone 1. Select SOS Time Zone and SOS Report Type 19 2. Click Send button. 3. Then please copy the SMS and send it to the phone number of TR-600 by your mobile phone. Note: .The content of SOS report includes GPS fix date and time. The GPS date and time will be according to the setting of SOS Time Zone. 3.6 Set up Digital Output There are 3 digital outputs of TR-600. Below please find the corresponding positions. You could activate or deactivate on the GS-TRAQ website.. 20 1. Perform the following: Setup Æ Setup Out Port Status 2. Select digital output port in the pull-down menu of Out port. 3. Select Active to activate that digital output or Disactive to deactivate that digital output in the pull-down menu of Out Status. 4. Click Send button. 5. Then please copy the SMS and send it to the phone number of TR-600 by your mobile phone 3.7 TR-600 Motion report 1. 2. Select Setup Report Mode on the menu bar. Select Motion Report in the pull-down menu of Report Command 3. Enter value for Report Interval (Static) (Range 30~65535 seconds) and Report Interval (Moving). (Range 10~65535 seconds) Click Send button. Then please copy the SMS and send it to the phone number of TR-600 by your mobile phone 4. 5. 21 3.8 Stop TR-600 Motion report Stop Motion Reporting 1. Select Setup Report Mode on the menu bar. 2. Select Stop Report in the pull-down menu of Report Command 3. Click Send button. TR-600 will stop motion report. Then please copy the SMS and send it to the phone number of TR-600 by your mobile phone 4. 22 3.9 TR-600 Geo-fence Function Setup Geo-fence area 1. Select Setup on the menu bar. 2. Select Setup Geo-fencing Parameter. 3. Click on Map Define 23 4. Then you could enter a specific address or city or landmark in the field of Address Search and then click Go button. Map will move to the entered location. For example, the map will show as below after entering Washington D.C. 5. Please move the cursor and click on the two points of the map to form a geo-fence area like the screenshot below. 6. Please click Save button to save the area. If you want to reset the area, you could click on 24 Reset button to set the area again. 7. After clicking Save button, please select you want to receive the geo-fence alarm report when tracker gets in the geo-fence area or gets out of the geo-fence area. 8. And then click Send button to send out the setting. Then please copy the SMS and send it to the phone number of TR-600 by your mobile phone. It will make TR-600 connect to the website for getting the setting. The steps above are for setting geo-fence area. You have to enable the geo-fence function by the steps below. 9. Enable Geo-fence function 1. Select Setup Æ Enable Geo-fencing 2. Click Enable 3. Enter the mobile phone number for receiving the geo-fence alarm report in the field of Geo-fencing Phone Number. 25 4. And then click Send button to send out the setting. 5. Please copy the SMS and send it to the phone number of TR-600 by your mobile phone. It will make TR-600 connect to the website for getting the command of enable geo-fence. 26 Industry Canada statement: This device complies with RSS-132 & RSS-133 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC NOTES This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2010:04:19 17:38:27+08:00 Create Date : 2010:02:04 15:54:53+08:00 Metadata Date : 2010:04:19 17:38:27+08:00 Format : application/pdf Title : Microsoft Word - TR-600 User Manual V0 2 For Lab.doc Creator : Luwalk Lee Document ID : uuid:d1f8b97f-05ae-4f28-8e7d-192ed581427f Instance ID : uuid:d688c497-645c-4b07-a596-3a85c715733d Page Count : 28 Author : Luwalk LeeEXIF Metadata provided by EXIF.tools