Honeywell 51306533 51306533 User Manual Reg guide

Download:
Mirror Download [FCC.gov]
Document ID	1411296
Application ID	2/k2g2lNBFJPcZsigmE6kg==
Document Description	Reg guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.07kB (363373 bits)
Date Submitted	2011-01-28 00:00:00
Date Available	2011-01-28 00:00:00
Creation Date	2011-01-18 12:39:38
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-01-18 12:39:38
Document Title	Microsoft Word - FDAP Reg Guide 51154689 Rev AT1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	E708312

51154689
Honeywell Process Solutions
AT1
REVISIONS
OneWireless
Field Device Access Point (FDAP)
RF Regulatory Compliance Guide
Honeywell Process Solutions
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 1 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
Revision Record
Revision
FCF:
Date
Purpose/Distribution
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 2 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
TABLE OF CONTENTS
DESIGNATION, SCOPE AND PREFACE ........................................................................................... 6
1.1
DESIGNATION ..................................................................................................................................... 6
1.1.1 Model Numbers and Revisions : .................................................................................................. 6
1.2
SCOPE ............................................................................................................................................... 6
1.3
PREFACE ........................................................................................................................................... 6
1.4
ABBREVIATIONS & DEFINITIONS ........................................................................................................... 7
2.1
3.1
FEDERAL COMMUNICATION COMMISSION (FCC) ........................................................................ 8
FCC COMPLIANCE STATEMENTS ......................................................................................................... 8
INDUSTRY CANADA (IC).................................................................................................................... 8
IC COMPLIANCE STATEMENTS ............................................................................................................. 8
RF SAFETY STATEMENT: ................................................................................................................. 9
FCC AND INDUSTRY CANADA (IC) IDENTIFICATION NUMBERS:.............................................. 10
5.1
5.2
6.1
6.2
6.3
7.1
7.2
8.1
8.2
8.3
8.4
FCC IDENTIFICATION NUMBERS: ....................................................................................................... 10
INDUSTRY CANADA IDENTIFICATION NUMBERS: .................................................................................. 10
INTENDED COUNTRY USAGE ........................................................................................................ 11
NORTH AMERICA ......................................................................................................................... 11
AUSTRALIA AND NEW ZEALAND ................................................................................................ 11
EUROPEAN UNION ....................................................................................................................... 11
MULTINODE GENERAL DESCRIPTION .......................................................................................... 12
INTENDED USE ................................................................................................................................. 12
FDAP DEVICE DIAGRAMS ................................................................................................................. 12
PRODUCT SPECIFICATIONS........................................................................................................... 13
DIRECT SEQUENCE SPREAD SPECTRUM (DSSS) RADIO, 2.4GHZ ...................................................... 13
FDAP USER ENVIRONMENT .............................................................................................................. 14
FDAP POWER SPECIFICATIONS ........................................................................................................ 14
ANTENNA CABLES............................................................................................................................. 15
ANTENNA LIGHTNING ARRESTORS ............................................................................................. 15
9.1
9.2
FOR USE WITH INTEGRAL OR REMOTE ANTENNA(S) ............................................................................ 15
FOR USE WITH REMOTE ANTENNA(S) ................................................................................................. 15
10
APPROVED ANTENNA TYPES/GAINS ........................................................................................... 16
11
EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP) ........................................................ 17
12
EIRP LIMITS, DSSS 2.4GHZ RADIO ................................................................................................ 18
12.1
FCC, IC, ACMA .............................................................................................................................. 18
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 3 of 25
51154689
Honeywell Process Solutions
AT1
12.2
REVISIONS
ETSI................................................................................................................................................ 19
13
SETTING POWER AND COUNTRY CODE: DSSS RADIO ............................................................. 20
14
RF SAFETY, MAXIMUM PERMISSIBLE EXPOSURE (MPE) STATEMENT ................................... 21
15
AGENCY COMPLIANCE ................................................................................................................... 22
15.1
RADIO AND EMC CERTIFICATIONS ..................................................................................................... 22
15.1.1
Federal Communication Commission (FCC)......................................................................... 22
15.1.2
Industry Canada (IC) ............................................................................................................. 22
15.1.3
European Telecommunications Standards Institue (ETSI) ................................................... 22
15.1.4
Australian communications and media authority (ACMA) ..................................................... 22
15.2
PRODUCT SAFETY AGENCY CERTIFICATIONS ..................................................................................... 23
15.2.1
Canadian Standards Association (CSA) ............................................................................... 23
15.2.2
Factory Mutual (FM) .............................................................................................................. 24
15.2.3
European ATEX Certification (ATEX).................................................................................... 25
15.3
EUROPEAN UNION CERTIFICATION (CE-MARK) ................................................................................... 25
16
FCF:
REFERENCE DOCUMENTS ............................................................................................................. 25
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 4 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
LIST OF FIGURES
Figure 1 –Diagram of Multinode Unit showing various external attributes _____________________________ 12
Figure 2 – Dimension of the Multinode Device ___________________________ Error! Bookmark not defined.
LIST OF TABLES
Table 1 – Assembly Number and Revision ............................................................................................................. 6
Table 2 –Table of Abbreviations and Definitions .................................................................................................... 7
Table 3 – Specifications of DSSS Radio in FDAP Device. ................................................................................... 13
Table 4 – Specifications User Environment FDAP Device. .................................................................................. 14
Table 5 – Power Specifications FDAP Device. ..................................................................................................... 14
Table 6 - Antenna Cable Specifications for Multinode Device. ............................................................................. 15
Table 7 – Lightning Arrestor Specifications for Integral Antenna(s) ..................................................................... 15
Table 8 – Lightning Arrestor Specifications for Remote Antenna(s) ..................................................................... 15
Table 9 – Approved Antenna Types and Gains .................................................................................................... 16
Table 10 – EIRP Limits, DSSS 2.4GHz Radio ...................................................................................................... 18
Table 11 – EIRP Limits, DSSS 2.4GHz Radio ...................................................................................................... 19
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 5 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
DESIGNATION, SCOPE AND PREFACE
1.1
Designation
HONEYWELL ONEWIRELESS FIELD DEVICE ACCESS POINT (FDAP).
1.1.1
Model Numbers and Revisions :
This document is valid for the following assembly number:
Model
Number
Assembly #
Rev.
FDAP1
51198665-100
FDAP2
51198665-200
Description
Field Device Access Point with Class 1 Div 1
certification (24VDC power input)
Field Device Access Point with Class 1 Div 2
certification (i.e. 24VDC and 120/230V AC power
input)
Table 1 – Assembly Number and Revision
1.2 Scope
This document outlines professional installation requirements for the Honeywell Field Device
Access Point (FDAP) for the Honeywell OneWireless Network. Professional installation is
required to comply with certification agency and legal requirements. This document must be
adhered to for all installations of the Honeywell OneWireless FDAP device.
1.3 Preface
This manual covers professional installation of the optional external antennas for use with the
Honeywell OneWireless FDAP device. Since this device requires manual power limit settings
for use with the higher gain antennas, it is classified by the FCC as a professional install
device. To be in compliance with FCC requirements, the radio must be installed with one of
several approved antenna types listed in this document.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 6 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
1.4 Abbreviations & Definitions
The term Honeywell Multinode Device (or simply Multinode) will be used to describe the
composite unit which includes the Honeywell DSSS or FHSS Radio Board, 3eTI Mesh Board,
Power Supply board, and all subassemblies housed inside the Multinode enclosure.
ACMA
ATEX
AWG
Co-located
COTS
CSA
DFS
DSSS
EMC
ETSI
EU
FCC
FHSS
FM
IC
IEEE
IR
IrDA
LED
MPE
MTBF
NEMA
PCB
PCI
RAM
RJ-45
RPN
SQA
Wi-Fi
WNSIA
Australian Communications and Media Authority
Potentially Explosive Atmospheres Directive
American Wire Gauge
Two or more radios transmitting simultaneously and with less than
20cm of separation distance.
Commercial Off-The-Shelf
Canadian Standards Association
Dynamic Frequency Selection
Direct Sequence Spread Spectrum
Electromagnetic Compatibility
European Telecommunications Standards Institute
European Union
Federal Communications Committee
Frequency-Hopping Spread Spectrum
Factory Mutual
Industry Canada
Institute of Electrical and Electronics Engineers
Infrared
Infrared Data Association
Light Emitting Diode
Maximum Permissible Exposure
Mean Time Between Failures
National Electrical Manufacturers Association
Printed Circuit Board
Peripheral Components Interconnect
Random Access Memory
Registered Jack-45
Reverse Polarity N-type
Supplier Quality Assurance
Wireless Local Area Network based on IEEE 802.11 Specifications
Wireless Network for Secure Industrial Application
Table 2 –Table of Abbreviations and Definitions
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 7 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
FEDERAL COMMUNICATION COMMISSION (FCC)
2.1
FCC Compliance Statements
¾ This device complies with Part 15 of FCC Rules and Regulations. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
¾ This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radiofrequency
energy and, if not installed and used in accordance with these instructions, may
cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
¾ Intentional or unintentional changes or modifications must not be made to the
Multinode unless under the express consent of the party responsible for
compliance. Any such modifications could void the user’s authority to operate the
equipment and will void the manufacturer’s warranty.
INDUSTRY CANADA (IC)
3.1
IC Compliance Statements
¾ To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not
more than that permitted for successful communication.
¾ Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
¾ This Class A digital apparatus complies with Canadian ICES-003.
¾ French: Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 8 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
RF Safety Statement:
To comply with FCC’s and Industry Canada’s RF exposure requirements, the following
antenna installation and device operating configurations must be satisfied. .
¾ When using integral or remote antenna(s) the FDAP unit must be fixed and
mounted on outdoor permanent structures and the antennas must not be colocated with any other antenna or transmitter device and have a separation
distance of at least 20cm from all persons.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 9 of 25
51154689
Honeywell Process Solutions
AT1
5.1
FCC and Industry Canada (IC) Identification Numbers:
FCC Identification Numbers:
•
5.2
Honeywell FDAP DSSS Radio
o Limited Modular Approval
o Federal Communication Commission Identification: S57 – 51306533
Industry Canada Identification Numbers:
•
FCF:
REVISIONS
Honeywell FDAP DSSS Radio
o Limited Modular Approval
o Industry Canada Identification: 573I - 51306533
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 10 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
INTENDED COUNTRY USAGE
6.1
NORTH AMERICA
Country
UNIIITED STATES
CANADA
6.2
AUSTRALIA AND NEW ZEALAND
Country
AUSTRALIA
NEW ZEALAND
6.3
ISO 3166 2 letter code
AU
NZ
EUROPEAN UNION
Country
Austria
Belgium
Bulgaria
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
FCF:
ISO 3166 2 letter code
US
CA
ISO 3166
2 letter code
AT
BE
BG
CY
CZ
DK
EE
FI
FR
DE
GR
HU
IS
IE
IT
Country
Latvia
Liechtenstein
Lithuania
Malta
Netherlands
Norway
Poland
Portugal
Romania
Slovakia
Slovenia
Spain
Sweden
Switzerland
United Kingdom
ISO 3166
2 letter code
LV
LI
LT
MT
NL
NO
PL
PT
RO
SK
SI
ES
SE
CH
BG
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 11 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
MULTINODE GENERAL DESCRIPTION
7.1 Intended Use
The Field Device Access Point (FDAP) is a key component of the Honeywell OneWireless
system, a secure wireless network for industrial applications. It is a ruggedized industrial radio
intended for use in hazardous locations to provide wireless connectivity for wireless sensor
networks. As a wireless router, the FDAP provides connectivity between the wired DCS network
and wireless field devices. The FDAP radio uses IEEE 802.15.4 Direct Sequence Spread
Spectrum (DSSS) technology and is compliant with ISA 100.11a open-standard wireless
networking technology. The FDAP is designed to be a standalone, pole or wall mounted unit. It is
intrinsically-safe device and suitable for use in Class I, Division 1 and Zone 1 hazardous
locations.
7.2
FDAP Device Diagrams
Figure 1 shows the unit-level drawing of the FDAP Device. All cables exit the unit via a 1/2”
conduit hub. The conduit hub allows end user to land conduit on the FDAP Device. Figure 1
shows the FDAP and all of external interfaces.
Figure 1 –Diagram of FDAP Unit showing various external attributes
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 12 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
PRODUCT SPECIFICATIONS
8.1
Direct Sequence Spread Spectrum (DSSS) Radio, 2.4GHz
Warning! The FDAP unit must be Professionally Installed in accordance with the
requirements specified in this document. See Section 12, for professional installation
maximum power setting requirements. Only the specified power settings, antenna types and
gains and cable lengths (attenuation) as outlined in this document are valid for FDAP
installations.
Item
Specification
Wireless Standard
Data Rates and Modulation
Frequency Band
Transmit Power
Receive Sensitivity
(typical)
Direct Sequence Spread Spectrum 2.4GHz
Data Rate: 250kbps
Modulation: OQPSK – DSSS
2,405 – 2,475MHz
Maximum: 18dBm
(Maximum transmit power will vary by channel and individual country
regulations.
-97dBm
Table 3 – Specifications of DSSS Radio in FDAP Device.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 13 of 25
51154689
Honeywell Process Solutions
AT1
8.2
REVISIONS
FDAP User Environment
Item
Specification
Operating Temperature:
Storage Temperature:
Operating Humidity:
-40 OC to +75 OC
-40 OC to +75 OC
0 to 100% RH
Table 4 – Specifications User Environment FDAP Device.
8.3
FDAP Power Specifications
Item
DC Operating Voltage:
AC Operating Voltage:
Power Consumption
(typical):
Specification
24VDC, +10%/-15%
85 – 264VAC, 50/60Hz
2W
Table 5 – Power Specifications FDAP Device.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 14 of 25
51154689
Honeywell Process Solutions
AT1
Antenna Cables
Cable
Honeywell
Application
Part #
DSSS, FHSS, 50018278-001
802.11
DSSS, FHSS, 50018278-003
802.11
DSSS, FHSS, 50018278-010
802.11
REVISIONS
8.4
Cable
Type
400
Series
400
Series
400
Series
Connector
Type
NM – NM
Frequency Length
(GHz)
(m)
2.4/5.8
Loss
(dB)
1.0 / 2.0
NM – NM
2.4/5.8
1.5 / 2.5
NM – NM
2.4/5.8
10
2.5 / 3.5
Table 6 - Antenna Cable Specifications for Multinode Device.
Antenna Lightning Arrestors
9.1 For use with Integral or Remote Antenna(s)
Application
Honeywell
Specification
Connector
Part Number
Type
DSSS, FHSS, 51202359-200
50 ohm
NM - NF
802.11
Frequency Attenuation
(GHz)
(dB)
0–6
0.4 (max)
Table 7 – Lightning Arrestor Specifications for Integral Antenna(s)
9.2 For use with Remote Antenna(s)
Application
Honeywell
Specification
Part Number
DSSS, FHSS, 50018279-090
50 ohm
802.11
Connector
Type
NF to NF
Frequency Attenuation
(GHz)
(dB)
0–3
0.4 (max)
NOTE: Depending on application needs, the “integral” arrestors may be used for remote antennas.
Table 8 – Lightning Arrestor Specifications for Remote Antenna(s)
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 15 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
10 Approved Antenna Types/Gains
This radio transmitter (FCC ID: S57 – 51306533, IC: 573I - 51306533) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with this device.
Antenna
Type
Omni
(integral)
Omni
(integral)
Omni
(integral)
Omni
(integral)
Omni
(remote)
Sector
(remote)
PatchRHC
(remote)
Patch-LHC
(remote)
Part Number
Beam
Width
Peak
Gain
(dBi)
(GHz)
OD24M-5
51506534-101
Omni
2.4
SMARTANT
SAA04-051000
51506534-101
Omni
2.4
Point to
Multi-Point
SMARTANT
HON04-052160
51506534-100
Omni
2.4
Point to
Multi-Point
HUBER +
SUHNER
1324.17.0047
NA
Omni
2.4
Point to
Multi-Point
L-com
HGV-2409U
50018414-001
Omni
2.4
Point to
Multi-Point
L-com
HG2414SP-120
NA
120°
14
2.4
Point to
Multi-Point
L-com
HG2409PCR-NF
NA
65°
2.4
Point to
Multi-Point
L-com
HG2409PCL-NF
NA
65°
2.4
Antenna
Application
Manufacturer
Manufacturer
Part Number
Point to
Multi-Point
PacWireless
Point to
Multi-Point
Honeywell
Freq.
Table 9 – Approved Antenna Types and Gains
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 16 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
11 Equivalent Isotropically Radiated Power (EIRP)
In radio communication systems, Equivalent isotropically radiated power (EIRP), or
alternatively, Effective isotropic radiated power is the amount of power that would have to be
emitted by an isotropic antenna (that evenly distributes power in all directions and is a
theoretical construct) to produce the peak power density observed in the direction of
maximum antenna gain. EIRP can take into account the losses in transmission line and
connectors and includes the gain of the antenna. The EIRP is often stated in terms of
decibels over a reference power level, that would be the power emitted by an isotropic
radiator with an equivalent signal strength. The EIRP allows making comparisons between
different emitters regardless of type, size or form. From the EIRP, and with knowledge of a
real antenna's gain, it is possible to calculate real power and field strength values.
EIRP(dBm) = (Radio Power (dBm)) – (Cable Loss (dB)) + (Antenna Gain(dBi))
Antenna gain is expressed relative to a (theoretical) isotropic reference antenna (dBi).
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 17 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
12 EIRP LIMITS, DSSS 2.4GHz RADIO
12.1 FCC, IC, ACMA
This radio transmitter (FCC ID: S57 – 51306533, IC: 573I - 51306533) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with this device.
Antenna
Type
Omni
Omni
Patch
Sector
Freq.
(GHz)
Max.
Ant.
Gain
(dBi)
Min.
Cable
Length
(m)
Min.
Cable
Loss
(dB)
Max. Radio
Output Power
(dBm)
Max.
EIRP
(dBm)
Agency/
Country
Integral
2.4
18
24
FCC, IC, ACMA
Remote
2.4
1.0
18
25
FCC, IC, ACMA
Remote
2.4
1.0
18
25
FCC, IC, ACMA
Remote
2.4
14
1.0
18
31
FCC, IC, ACMA
Radio Usage /
Application
Point to
MultiPoint
Point to
MultiPoint
Point to
MultiPoint
Point to
MultiPoint
Notes:
1. The values in the above table have been determined through agency certification testing.
2. Maximum transmit power will vary by channel, data rate, and individual country regulations.
3. The following shall apply for antenna type, frequency range, application/usage and agency/country
compliance:
• Antenna gains above the maximum values shown shall not be used.
• Cable length/loss below the minimum values shown shall not be used.
• Maximum overall radio output power shown shall not be exceeded.
• Maximum EIRP values shown above shall not be exceeded.
4. Beam width, for sector and dish antenna, may range between 0 – 180degress.
5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna
types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this
list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
Table 10 – EIRP Limits, DSSS 2.4GHz Radio
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 18 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
12.2 ETSI
Antenna
Type
Omni
Omni
Omni
Patch
Sector
Freq.
(GHz)
Max.
Ant.
Gain
(dBi)
Min.
Cable
Length
(m)
Min.
Cable
Loss
(dB)
Max. Radio
Output Power
(dBm)
Max.
EIRP
(dBm)
Agency/
Country
Integral
2.4
3.7
8.7
ETSI5
Integral
2.4
3.2
9.2
ETSI5
Remote
2.4
10
2.5
3.7
9.2
ETSI5
Remote
2.4
10
2.5
3.7
9.2
ETSI5
Remote
2.4
14
10
2.5
-2.8
8.7
ETSI5
Radio Usage /
Application
Point to
MultiPoint
Point to
MultiPoint
Point to
MultiPoint
Point to
MultiPoint
Point to
MultiPoint
Notes:
1. The values in the above table have been determined through agency certification testing.
2. Maximum transmit power will vary by channel, data rate, and individual country regulations.
3. The following shall apply for antenna type, frequency range, application/usage and agency/country
compliance:
• Antenna gains above the maximum values shown shall not be used.
• Cable length/loss below the minimum values shown shall not be used.
• Maximum overall radio output power shown shall not be exceeded.
• Maximum EIRP values shown above shall not be exceeded.
4. Beam width, for sector and dish antenna, may range between 0 – 180degress.
5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz.
Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range
of 2,454 – 2,483.5MHz.
Table 11 – EIRP Limits, DSSS 2.4GHz Radio
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 19 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
13 Setting Power and Country Code: DSSS Radio
TBD
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 20 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
14 RF Safety, Maximum Permissible Exposure (MPE) statement
To comply with FCC’s and Industry Canada’s RF exposure requirements, the following
antenna installation and device operating configurations must be satisfied. .
¾ When using integral or remote antenna(s) the FDAP unit must be fixed and mounted on
outdoor permanent structures and the antennas must not be co-located with any other
antenna or transmitter device and have a separation distance of at least 20cm from all
persons.
FCF:
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 21 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
15 AGENCY COMPLIANCE
15.1 Radio and EMC Certifications
15.1.1 Federal Communication Commission (FCC)
¾ Specification: FCC Part 15.247 Subpart B for unintentional radiators
¾ Specification: FCC Part 15.247 Subpart C for intentional radiators
15.1.2 Industry Canada (IC)
¾ Method: RSS-210, Issue 7
¾ RSS-Gen, Issue 2
¾ ICES-003, Issue 4
15.1.3 European Telecommunications Standards Institue (ETSI)
¾ Emissions Specification and Method: EN 300 328 V1.7.1
¾ Immunity Specification: EN 301 489-17 V2.1.1
¾ Immunity Method: EN 301 489-1 V1.8.1
¾ Product Standard: IEC61326-1 (1st Edition, 2005, Industrial Locations)
15.1.4 Australian communications and media authority (ACMA)
¾
FCF:
Specification: AS/NZS 4268
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 22 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
15.2 Product Safety Agency Certifications
15.2.1 Canadian Standards Association (CSA)
CSA electrical equipment requirements for use within Division 2 and Zone 2 hazardous
locations.
IEC61010-1 (2nd Edition, 2001-02), "Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use, part 1: General Requirements
Canadian Standards Association Standard C22.2 No. 213-M1987, "Non-Incendive Electrical
Equipment for Use in Class I, Division 2 Hazardous Locations"
Canadian Standards Association Standard E60079-0:02, “Electrical Apparatus for explosive
gas atmospheres – General Requirements”
Canadian Standards Association Standard E60079-15:02, “Electrical Apparatus for explosive
gas atmospheres – Type of Protection “n””
•
FCF:
Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 23 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
15.2.2 Factory Mutual (FM)
FM electrical equipment requirements for use within Division 2 and Zone 2 hazardous
locations.
Factory Mutual Approval Standard Class No. 3600, "Electrical Equipment for Use in
Hazardous (Classified) Locations - General Requirements
Factory Mutual Approval Standard Class No. 3810, "Electrical and Electronic Test,
Measuring, and Process Control Equipment
Factory Mutual Approval Standard Class No. 3611, "Electrical Equipment for Use in Class I,
Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified)
Locations
ANSI/ISA 12.00.01-2002, “Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous
(Classified) Locations: General Requirements”
ANSI/ISA 12.12.02-2003, “Electrical Apparatus for explosive gas atmospheres – Type of
Protection “n””
•
FCF:
Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 24 of 25
51154689
Honeywell Process Solutions
AT1
REVISIONS
15.2.3 European ATEX Certification (ATEX)
The completely assembled Multinode will conform to European electrical equipment
requirements for use within Zone 2 Hazardous Locations.
IEC 60079-0:2004-01, “Electrical Apparatus for explosive gas atmospheres – General
Requirements
IEC 60079-15:2005-03, “Electrical Apparatus for explosive gas atmospheres – Type of
Protection “n”
•
Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
15.3 European Union Certification (CE-mark)
•
Compliance with:
o R&TTE Directive 1999/5/EC
o EMC Directive 2004/108/EC
o LVD Directive 73/23/EEC
o ATEX Directive 94/9/EC
16 Reference Documents
FCF:
OneWireless Field Device Access Point User's Guide
Field Device Access Point Specification Release 200 EP03-640-200, August 2010
OneWireless Field Device Access Point (FDAP) RF
Regulatory Compliance Guide
FMF:
Made by: D.S.
Issue:
2010-11-30
Honeywell
IACD/Ft.W
Approval
Prints to
51154689
SIZE Sh. No.: 25 of 25

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:01:18 12:39:38-07:00
Create Date                     : 2011:01:18 12:39:38-07:00
Format                          : application/pdf
Title                           : Microsoft Word - FDAP Reg Guide 51154689 Rev AT1.doc
Creator                         : E708312
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:81fd6f0d-1aae-4b0a-aeb1-6e8913fdbc16
Instance ID                     : uuid:804d0e50-8c24-4f6e-a605-dd602f8e0151
Page Count                      : 25
Author                          : E708312

EXIF Metadata provided by EXIF.tools