Leedarson Lighting 7HGWWZAA0 Siren Hub User Manual
LEEDARSON LIGHTING CO., LTD. Siren Hub
User Manual
Quick Start Guide Step 1: Get the HubSpace app in Apple store or Google Play. Step 2: Create an account and sign in. Step 3: From the home screen press the “+” symbol in the upper right hand corner. Step 4: The next screen is a list of possible devices that can be added. Select “Security Kit” and follow the instruction of the app to set up this Security Kit. Device list Kit Security kit Hub Siren bulb When new, out of the box, adding the Security Kit will also add all of the devices that shipped with it. These include two door/window sensors, one motion sensor, one keypad and one siren hub. Step 5: Remove the plastic stickers on door/window sensors, motion sensor and keypad. Step 6: Follow the installation instructions on User Guide. Safety Information WARNING: Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested. WARNING: Any battery has the potential to leak harmful chemicals that can damage skin, clothing or the inside of the alarm. To avoid risk of injury, do not allow any substance leaked from the battery to come in contact with eyes of skin. Any battery has the potential to rupture and may excessive heat. Use caution at all times when handling batteries. To reduce the risk of personal injury or harm to your alarm, take the following precautions: Do not use different brands of batteries in the same device. When replacing batteries always replace the whole set. Do not use rechargeable or reusable batteries. Do not allow children to install batteries unsupervised. Follow battery manufacturer’s instructions for the proper handling, storage and disposal of batteries. WARNING: Used batteries should be disposed of at an appropriate recycling center. Do not discard with normal household trash. DO NOT BURN. WARNING: Clean the mounting surface with a gentle degreaser agent. Please note that some surfaces may be unsuitable for the mounting adhesive pads provided. WARNING: Security system devices cannot compensate for loss of life or property. WARNING: Risk of personal injury. Prolonged exposure to alarm siren may cause permanent hearing loss. WARNING: This product cannot be linked to a monitored security system. DEFIANT is not responsible or liable for any damage, vandalism, theft or other actions that may occur while this product is in use. WARNING: Keep batteries away from children. This product contains coin/button cell batteries. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep away from infants and small children at all times. If battery is swallowed or placed inside any part of the body, immediately seek EMENGENCY medical attention. Battery may rupture if the incorrect type of battery is used. Follow the instructions in this manual. CAUTION: Do not install In wet locations. Outside the premises (outdoors). Near the metal objects and mirrors that cause radio signal attenuation or shading it. Near the powerful main wiring. Warranty 1 YEAR LIMITED WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear, bulbs or batteries. Contact the Customer Service Team or visit www.HOMEDEPOT.com. zigbee Wireless Protocol: zigbee 3.0 FCC Regulation This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: user’s authority to operate the equipment. FCC Statement: “This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.” Pre-Installation PLANNING INSTALLATION Compare all parts in the package with the Package Contents list. If any part appears missing or damaged, do not install this product. Contact Customer Support. ABOUT WIRELESS EQUIPMENT Wireless systems are reliable and tested to high standards; however, it is important to consider that there are some limitations due to their transmitting power and range: Receivers may be blocked by radio signals occurring on or near operating frequencies, regardless of the code selected. A receiver can only respond to one transmitted signal at a time. Wireless equipment should be tested regularly to determine whether there are sources of interference and to protect against faults. INSTALLATION LOCATION DETERMINE THE LOCATION OF THE SIREN HUB, WHICH SHOULD BE PLACED: Within a few feet of an electrical outlet Where it is easily accessible Away from doors or windows that could be accessed by intruders Away from extreme temperature sources (radiators, ovens, stoves etc.) and large metal objects that could interfere with the wireless performance. Pre-Installation (continued) Product Introduction Siren Hub Your home security hub connects the alarm system to your Wi-Fi network and other smart home devices. It also sounds the alarm to alert you when a security breach has occurred. C D E Part Description Siren Strobe Warning Light Power Indicator WAN Indicator LAN Indicator Reset button Items Description Siren Sounds the alarm: When there has been a security breach Strobe Warning Light Reset button Power Indicator WAN Indicator LAN Indicator security breach Setup mode: Press the button 3 times within 3 seconds Factory reset: Hold the button for 10 seconds On: The device is powered on and works normally Off: The device is powered off Flashing: System is currently adding a device On: Connected to the cloud Off: Disconnected from the cloud Flashing: Data is being send to/from the cloud On: Connected to your home router Off: Disconnected from the router Flashing: Data is being send to/from the router connect to a device or a Wi-Fi network Operation Setting the Security Levels Home Security Starter Kit has 4 different security levels you’ll use when you’re home or away. You can easily switch between them on the HubSpce App and Keyad. Status Response Arm Away Use when no one is home The alarm sounds when a door or window opens, or when there’s motion in a room Detections Notifications Arm Stay Use when you’re home and want partial coverage The alarm sound when the selected active sensors are triggered Disarm Use when you don’t want security coverage The alarm won’t sound SOS When there is an emergency and an alert is needed The alarm sounds when you tap SOS on the App, or press the SOS button for 3 seconds on the keypad or key fob Motion Sensor Door /Window Sensor Alarm and Security Alerts settings can later be changed by the user in the alarm setting menu. Arm Away Arm Stay What’s detected Entry Timer Exit Timer Siren Volume Alarm Duration Strobe Light Motion Sensor Door/Window Sensor 30s 30s High 1min On Door/Window Sensor 30s 10s High 1min On
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2018:08:29 14:02:25+08:00 Creator : Adobe InDesign CC 13.0 (Windows) Modify Date : 2018:08:30 15:59:39+08:00 Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15 Metadata Date : 2018:08:30 15:59:39+08:00 Creator Tool : Adobe InDesign CC 13.0 (Windows) Thumbnail Width : 184 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13592 bytes, use -b option to extract) Instance ID : uuid:dddd8517-811a-4977-be3a-8e442bf29529 Original Document ID : xmp.did:4B0D96F99873E01196A0E7EE2F4866E3 Document ID : xmp.id:ba676d83-4166-5d42-b830-6313a6448535 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9d900d70-9c85-e74c-a94d-cc1a0ee0e984 Derived From Document ID : xmp.did:e42aab99-d047-1d48-8533-730ce2f9ce97 Derived From Original Document ID: xmp.did:4B0D96F99873E01196A0E7EE2F4866E3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Windows) History Changed : / History When : 2018:08:29 14:02:25+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 9.999980 Max Page Size H : 14.000480 Max Page Size Unit : Centimeters Font Name : HelveticaNeue-BoldCond, HelveticaNeueLTStd-MdCn, HelveticaNeueLTStd-Bd Font Family : Helvetica Neue, Helvetica Neue LT Std, Helvetica Neue LT Std Font Face : 77 Bold Condensed, 67 Medium Condensed, 75 Bold Font Type : Type 1, Open Type, Open Type Font Version : 001.000, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False Font File Name : hlbc_0.PFB; hlbc_0.pfm, HelveticaNeueLTStd-MdCn_3.otf, HelveticaNeueLTStd-Bd_4.otf Plate Names : Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 6EXIF Metadata provided by EXIF.tools