Manual
HOW IT WORKS SMART SENSOR MESH NETWORKING LINNO LAMPS MESH NETWORKING SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE WHAT SMART SENSOR SCEANARIO IS window Group 1 SMART SENSOR MESH NETWORKING LINNO LAMPS MESH NETWORKING Group 2 SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE WHAT SMART SENSOR SCEANARIO IS window SMART SENSOR MESH NETWORKING LINNO LAMPS MESH NETWORKING SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE WHAT SMART SENSOR SCEANARIO IS window SMART SENSOR MESH NETWORKING LINNO LAMPS MESH NETWORKING SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE WHAT SMART SENSOR SCEANARIO IS brightness window SMART SENSOR MESH NETWORKING 70% LINNO LAMPS MESH NETWORKING brightness 70% SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE WHAT SMART SENSOR SCEANARIO IS brightness window SMART SENSOR MESH NETWORKING 10% LINNO LAMPS MESH NETWORKING brightness 50% SMART DEVICE APP REMOTE CONTROL SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE 3 HIGH EFFICIENCY LIGHT FOR SPACE Space and light's efficiency 6 SECURITY MODE FOR USER Upgrade security ITEM : SMART SENSOR MOTOIN SENSOR LIGHT SENSOR .. !! SECURITY LUX CONTROL MOOD LAMP 360 120 3 PIR SENSOR For large Space 1 PIR SENSOR For Small Space Specifications 1) Operating voltage: AC 110 V 2) Communication Method: Wireless (Bluetooth) 3) Operating distance: 10 M 4) Output: Max +10 dBm 5) Receive sensitivity: -102 dBm typ. 6) Operating frequency Send: 2.402 ~ 2.480 MHz, 2.4G ISM band Reception: 2.402 ~ 2.480 MHz, 2.4G ISM band 7) Channel: 40 channels 8) Modulation scheme: GFSK 9) Channel spacing: 2 MHz 10) Profile: Bluetooth Ver 4.0 11) Protocol: Asynchronous serial communication 12) Size: 85 X 85 X 26 mm 13) Weight: About : 150 g FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 Cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. CONTACT INFORMATION Manufacturer Address : 96-22, Yangji-ro 281beon-gil, Onam-eup, Namyangju-si, Gyeonggi-do, Korea To locate in-country Linno Inc., distributors of the SSL3 please refer to the Linno Inc. Website http://linno.co.kr/ These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: Linno Inc 96-22, Yangji-ro 281beon-gil, Onam-eup, Namyangju-si, Gyeonggi-do, Korea Tel: +82-2-546-9820 Fax: +82-2-546-9622 Web: http://linno.co.kr/ This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference ,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:06:27 19:40:55+09:00 Creator : PowerPoint용 Acrobat PDFMaker 9.0 Modify Date : 2017:07:21 13:51:20+09:00 Tag LCID : 1042 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2017:07:21 13:51:20+09:00 Creator Tool : PowerPoint용 Acrobat PDFMaker 9.0 Document ID : uuid:944d0d65-25ca-4500-92e0-849ad1330a24 Instance ID : uuid:f016c5a2-b690-490d-91ac-5048a8a9ce46 Format : application/pdf Title : Producer : Adobe PDF Library 9.0 Lcid : 1042 Tag Version : 12.0.4518 Page Layout : SinglePage Page Count : 15EXIF Metadata provided by EXIF.tools