Pioneer and Onkyo Asia SECL5BT Pioneer SE-CL5BT User Manual SE CL5BT QuickStartGuide front V1

Pioneer & Onkyo Marketing Asia Limited Pioneer SE-CL5BT SE CL5BT QuickStartGuide front V1

Users Manual

1. Set Contents/法语/德语/意大利语2. Names of Parts/法语/德语/意大利语3. Replacing the earphone tip/法语/德语/意大利语4. Wearing the clipper/法语/德语/意大利语5. Charging the batteries/法语/德语/意大利语(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.SE-CL5BTUnit 1033, 10/F., Star House, No. 3 Salisbury Road, Tsim Sha Tsui, Kowloon, Hong Kong© 2017 Pioneer & Onkyo Marketing Asia Limited© 2017 Pioneer & Onkyo Marketing Asia Limited22828 Lockness Avenue Torrance, CA 90501Tel: 424-223-5203Tel: +44 (0) 208 363 5002136547SE-CL5BT1 2 3SE-CL5BTClipWear Active Wireless EarphonesClipWear Active Wireless Earphones法语ClipWear Active Wireless Earphones德语ClipWear Active Wireless Earphones意大利语ClipWear Active Wireless Earphones西班牙语ClipWear Active Wireless Earphones荷兰语ClipWear Active Wireless Earphones瑞典语ClipWear Active Wireless Earphones日语SE-CL5BT
(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.(1) While the power of the unit is off, press and hold the Main Function Button until the unit enters paring mode. • The paring mode is confirmed by LED indicator’s alternatively flashing blue and red.Release the Main Function Button after confirming that the LED indicator is alternately lighting blue and red.Confirm the presence of all parts and componets before use.1: Earphone2: Micro-USB cable3: S, M, L eartips4: Warranty card (Europe / U.S.A. and Canada / Japan)5: Quick Start Guide (this document)6: Safety Guide1. Set Contents1: Main Function Button2: Volume Up Button3: Volume Down Button4: LED Indicator5: Micro-USB Port6: Microphone7: Clipper2. Names of Parts (see Fig.2)(1) Installation • Press the mounting surface firmly onto the nozzle.Failure to press the tip fully onto the nozzle may cause the tip to come off.(2) Removal • Hold the earphone body securely and twist off the earphone tip. 3. Replacing the earphone tip (see Fig.3)The clipper is designed as a clothing clip. This gives you a variety of simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt or whatever that fits your needs. Just clip it on the neckline（as shown in figure 4), collar edge,or wherever that fits your needs. 4. Wearing the clipper how you like itThis document describes the information and operations required for startup. For more advanced operation procedures, read the instruction manual which is available on the website.Before you start<Europe>http://www.pioneer-audiovisual.eu/<U.S.A.>www.PioneerElectronics.com/Home<Canada>www.PioneerElectronics.ca/HomeThe unit’s battery must be recharged before use.The accessory micro-USB cable must be used for recharging the unit’s battery. • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use. • Battery performance is influenced by surrounding temperature. Charge the supplied rechargeable batteries within a temperature range 10 to 35 degrees celcius. • Batteries become slightly warm when charging. This is not a malfunction. • Recharging may not be possible if computer is in power-saving mode. • The unit cannot be used during charging.Connect the appropriate connector on the accessory micro-USB cable to the micro-USB port on the earphones, and the USB plug on the other end to a USB port on a computer (see Fig.5). • When recharging begins, the LED indicator on the earphone will light red. • Full recharging requires about 2 hours, when recharging is completed, the LED indication will turn blue.5. Charging the batteriesNoteNotes on battery chargingPairing must be performed before the earphones can be used to listen the music or communicate using a Bluetooth device.For further details regarding the pairing procedure, consult the user’s manual for your Bluetooth device.6. PairingTo use the wireless earphones to listen to music from a Bluetooth device, you must first perform pairing with the Bluetooth device using the A2DP audio profile.For details on how to perform pairing, see < 5.Pairing >.(1) With power to the wireless earphones’ turned off, hold the MFB depressed for about three seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.Connect to the Bluetooth device • Confirm that the power to the wireless earphones is ON before connecting to the Bluetooth device. • Depending on the device, connection between the wireless earphones and Bluetooth device may be effected automatically after pairing.Disconnecting from the Bluetooth device • Press and hold the Main Function Button until the LED turns off and the power of the device turns off.(2) Turn on the power to the Bluetooth device you are going to pair with, and begin pairing; search for this unit (wireless earphones) from the paired Bluetooth device. • Set Bluetooth device close (within one meter) to the wireless earphones. • These wireless earphones will appear in the Bluetooth device’s display as “Pioneer SE-CL5BT”.(3) Confirm that pairing has been successfully completed with the Bluetooth device. • Look at the display for the Bluetooth-enabled device and select “Pioneer SE-CL5BT”. • When the LED is flashing in blue slowly about once every 3 seconds, pairing is completed. • The PIN code for these wireless earphones has been factory set as “0000”. Input this code if requested by the Bluetooth device.7. Enjoying MusicControls when listening to musicIf the connected Bluetooth device supports AVFCP, the following operations can be used. • (＋) button Press once: increase volume Press and hold: advance to next track or chapter • (﹣) button Press once: decrease volume Press and hold: advance to previous track or chapter • Main Function Button Press once: Play / Pause*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the headphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the music playback settings may need to be configured. Consult the user’s manual for the Bluetooth device.*Depending on the specifications of the connected Bluetooth device, a music playback application may start automatically or the music cannot be paused/played. Consult the user’s manual for the Bluetooth device.To use the wireless earphones for vocal communication, pairing must be performed with the desired Bluetooth device using the “hands-free profile” (HFP) or “headset profile” (HSP).For details on how to perform pairing, see < 5.Pairing >.*If the Bluetooth device supports both profiles HFP & HSP, use the profile HFP.(1) With power to the wireless earphones’ turned off, hold the Main Function Button depressed for about 3 seconds.The earphones’ power will turn on and the LED indicator will flash blue.(2) Turn on the Bluetooth function on the device you wish to connect to.When pairing is completed, the wireless earphones will automatically connect to the Bluetooth device.*If automatic connection is not achieved, or the earphones automatically connect to a different Bluetooth device than the one you wish to use, follow the instructions for the desired Bluetooth device regarding manual connection.8. Vocal communicationBasicTransmission format.....................................Bluetooth Standard Protocol Ver. 4.1Maximum transmission distance...................................About 10m line of sight *1Frequency used...........................................4GHz (2.400 GHz to 2.4835 GHz)*2Supported Bluetooth profiles...............................................A2DP, AVRCP, HFP, HSPSupported CODEC...................................................................................SBCBattery life with continuous use........Maximum 8 hours of continuous transmission (including music-play time)Recharging time.........................................................................About 2 hoursBattery.................................. DC3.7V internally rechargeable Lithium-ion batteryIPX level................................................................................................IPX-4Weight.....................................................................................................21gHeadphoneType............................................................Fully-enclosed dynamic earphonesDriver units........................................................................................φ9.2mmImpedance..........................................................................................16 ohmFrequency response............................................................20 Hz ~ 20 000 HzSensitivity..............................................................................................95 dBAccessoriesS, M, L eartips..........................................................................................1pcMicro-USB cable (50cm)............................................................................1pcWarranty card(Europe / U.S.A. and Canada / Japan).....................................1pcQuick Start Guide (this document)...............................................................1pcSafety Guide.............................................................................................1pc*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.*2 This product utilizes radio wave in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using 2.4 GHz spectrum.SpecificationNote • “Pioneer” is a trademark of Pioneer Corporation, and is used under license. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade name are those of their respective owners. • Android is a trademark of Google IncSpecifications and design are subject to possible modifications without notice due to improvements.About License and TrademarksVocal communication controlsIf the connected Bluetooth device supports AVRCP, the following operations can be used. • (＋) button Press and hold: Increase volume • (﹣) button Press and hold: Decrease volume • Main Function Button Press once when receiving a call: Enable conversation.Press once again to end conversation. Press and hold when receiving a call: Refuse communicationThe same controls are supported in the event a call is received while listening to music.*When sound volume is set to maximum or minimum levels, a beep sound will be produced from the earphones.*Sound volume can be adjusted on the matching Bluetooth device.*Depending on the specifications of the connected Bluetooth device, the controls noted above and controls on the Bluetooth device may not be supported.*Depending on the specifications of the connected Bluetooth device, the phone settings may need to be configured. Consult the user’s manual of the Bluetooth device.1. Set Contents/西班牙语/荷兰语/瑞典语/日语2. Names of Parts/西班牙语/荷兰语/瑞典语/日语3. Replacing the earphone tip/西班牙语/荷兰语/瑞典语/日语4. Wearing the clipper/西班牙语/荷兰语/瑞典语/日语5. Charging the batteries/西班牙语/荷兰语/瑞典语/日语2136547SE-CL5BT1 2 3SE-CL5BT

Navigation menu