Polygroup CW003 Christmas Tree Lighting User Manual
Polygroup Limited(Macao Commercial Offshore) Christmas Tree Lighting
Contents
- 1. 140404080GZU_2AABT-CW003_User manual
- 2. Users Manual
140404080GZU_2AABT-CW003_User manual
Christmas Tree Model: DOU186755LEDCMR Sku # 1000 654 240 Safety Information Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. a. b.Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. c. This seasonal product is not intended for permanent installation or use. d.Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat. e.Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f. Do not let lamps rest on the supply cord or on any wire. g.Unplug the product when leaving the house, when retiring for the night, or if left unattended. h.This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i. Do not use this product for other than its intended use. j. Do not hang ornaments or other objects from cord, wire, or light string. k.Do not close doors or windows on the product or extensions cords as this may damage the wire insulation. l. Do not cover the product with cloth, paper, or any material that is not a part of the product when in use. m.This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug. n.This product is equipped with push-in type lamps. Do not twist lamps. o.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. p.Read and follow all instructions that are on the product or provide with the product. q. Package Contents Part Description Tree top, tag 3 Tree center, tag 2 Tree bottom, tag 1 Tree stand Quantity Assembly Assembling the tree stand Step 1. Choose a location near a wall outlet. Step 2. Unfold the legs of the tree stand (D) and lay the stand on the floor. Step 3. Slide the locking disk of the tree stand (D) down until it snaps into place. Assembling the tree This tree assmebles with Quick Set® technology ---Set up and light up your tree in less than 10 minutes! Step 1.Remove the protective caps from the tree bottom (C) and insert the pole into the tree stand (D). Step 2.Remove the protective caps from the tree center (B) and insert the pole into the tree bottom (C) . Step 3.Insert the tree top (A) into the tree center (B). Step 4.Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges. Step 5.Insert the green label extension cord plug into the wall outlet. All your lights should now be lit. Step 6.When finished shaping the branches, slightly upsweep all branch tips for a uniform look. Section 3 Do Not Tamper Internal Parts 50S 50S 80S Open the protective cover 100S Do Not Tamper Internal Parts Section 2 100S Open the protective cover 90S Section 1 Adaptor To Be Plugged Into Wall Outlet 80S SAVE THESE INSTRUCTIONS Control box Christmas Tree Model: DOU186755LEDCMR Sku # 1000 654 240 Operation Turning on the tree NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree. Step 1. Connect the light strings of the tree together and plug the power cord into a wall outlet. Step 2. If the tree comes with a foot pedal, step on the On/Off button. Maintenance Spare parts This tree package includes hinge pins, washers, bulbs and fuse for any replacement or repair that you need to perform on your tree. If extra parts are needed, contact the Customer Service Team at 1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday through Friday. Repairing Loose Hinges Step 1. Place the branch into the slot of the bracket Step 2. Insert a new hinge pin through the holes of the bracket and secure with a washer. Use and Care Instructions 1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 2.Before disassembling the tree, unplug the tree and remove all ornaments and decorations. 3.Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. 4.Repeat this step for the center and bottom tree sections. 5.When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. Cover the protective cap on the poles to avoid damaging the internal parts. 6.When not in use, store neatly in a cool, dry location protected from sunlight. User servicing instructions HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND REMOTE CONTROL: Press the selector button on the “Dual Color Light Control ler” or “Remote Controller” to select among: (1) CLEAR AND MULTI-COLOR ALTERNATING; (2) CLEAR LIGHTS; (3) MULTI LIGHTS and (4) TURN OFF BOTH LIGHTS. Note: The lights will be automatically reset to “CLEAR AND MULTI-COLOR ALTERNATING” every time the product is powered up. For Selector the remote controller, replace only Button with CR2032 battery. See bottom of Remote Controller the remote controller for replacement instruction. Light Controller CAUTION: Use only power adaptor that was provided with this product. Using a different power adaptor will damage the lights and cause fire, electrical shock hazard. Fuse replacement of extension cord a)Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. b)Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. SPARE FUSE c)Remove fuse carefully. d)Risk of fire. Replace fuse only with 5,7, or10 Amp, 125 Volt fuse for the power cord set. e)Close fuse cover. Slide closed the fuse access cover on top of attachment plug. f )Risk of fire.Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. Troubleshooting Problem Solution The tree does not light Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button. Check for blown fuses at the light string and power cord plugs. Replace as needed with the replacement fuses provided. Check for loose, broken, or missing bulbs and replace as needed with the replacement bulbs provided FCC notices: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Christmas tree With model PDC series or PDR series controller FCC ID: 2AABT-CW003 LxGxYxS (First X = 30-120, second X=0-5, thirdly X=0100-2300) Note: "L" means that the low voltage. The first "x" indicates the size of the tree, said the use of height from 3ft-12ft. "Gx" number of lines, G0 represents 0 drag line G5 on behalf of 5 drag line. "Y" means tree stand. M means the tree is to use ordinary tree foot. R which means that the tree is to use rotating tree foot. The third "x" represents the number of lamp, from 100 to 2300 lamp. "S" means that the tree pin. LIxYx (First X=06-220, second X=010-2300) Note: Outfit With model PDC series or PDR series controller "L" means that the low voltage. "I" indicates for indoor use only, if blank means for indoor and outdoor use. The first "x" indicates the size of Wreath/Garland/Teardrop/Tree/Swag, the size is from 06 in - 220 in in for Wreath/Teardrop/Tree/Swag; the size is from 06 ft - 50 ft in for Garland. "Y" means type of product. "W" which means wreath. "G" which means Garland. "TD" which means teardrop. "T" which means tree. "S" which means swag. The second "x" represents the number of lamp, from 10 to 2300 lamps.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 About : uuid:6bf325ec-a6b5-40e7-bf06-0131b2e239be Startup Profile : Print Producer : Adobe PDF library 9.00 Metadata Date : 2014:05:06 17:46:55+08:00 Modify Date : 2014:05:06 17:46:55+08:00 Create Date : 2014:03:13 11:00:11+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Format : JPEG Thumbnail Width : 184 Thumbnail Height : 256 Thumbnail Image : (Binary data 26121 bytes, use -b option to extract) Instance ID : uuid:b219efd1-194b-4a5a-8179-8f6da9526338 Document ID : xmp.did:93E493975BAAE31186D2DA0F0731B529 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:96f2b397-d599-1e4d-903e-4422672a96de Derived From Document ID : xmp.did:F87F11740720681197A5C6DA8C2593EE Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:23383BFEA441DD11A6AECB58D53C8B28, xmp.iid:086F577ABE41DD11A6AECB58D53C8B28, xmp.iid:AB13E98E200911689FE8CB9EA85C5459, xmp.iid:93D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811B34B80FC905F8DB1, xmp.iid:F77F11740720681197A5C6DA8C2593EE, xmp.iid:F87F11740720681197A5C6DA8C2593EE, xmp.iid:93E493975BAAE31186D2DA0F0731B529 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 14:13:53+08:00, 2008:06:24 15:23:44+08:00, 2008:06:26 06:03:48-07:00, 2008:07:02 13:54:27-07:00, 2008:07:21 16:58:31+05:30, 2008:09:05 03:21:29-07:00, 2008:09:05 04:21:56-07:00, 2014:03:13 11:00:11+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 8.267782 Max Page Size H : 11.692912 Max Page Size Unit : Inches Font Name : Myriad-Bold, Myriad-Roman Font Family : Myriad, Myriad Font Face : Bold, Roman Font Type : Type 1, Type 1 Font Version : 001.001, 001.000 Font Composite : False, False Font File Name : wmb_____.pfb; wmb_____.pfm, wmr_____.PFB; wmr_____.pfm Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Format : application/pdf Title : 打印 Page Count : 3 Creator : Adobe Illustrator(R) 11.0 For : 2 3, FtpDown Bounding Box : 0 0 596 842 Creator Version : 11 Container Version : 9 Image Height : 842 Image Width : 596 Image Size : 596x842 Megapixels : 0.502EXIF Metadata provided by EXIF.tools