SOUNDMAX ELECTRONICS NA788 Car Audio System player User Manual NA788S C ENG SP IM T150123
Soundmax Electronics Limited Car Audio System player NA788S C ENG SP IM T150123
User manual
NA788 Car Audio System Player INSTRUCTION MANUAL CD MP3 WMA USB SD AUX-IN BT iPod/iPhone USB 1A Smart Phone Battery Charge Safety Preparation WARNING How to attach/detach the faceplate Attach Detach Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. If you experience problems during installation, consult your Nakamichi dealer. When you purchase external components, check with your Nakamichi dealer to make sure that they work with your model and in your area. Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached. The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. How to reset your unit Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. FCC ID :2AB7S-NA788 FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2 EN Maintenance Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. Reset If this unit fails to operate properly, press the reset button. The unit returns to factory settings when the reset button is pressed. What’s in the box Check and identify the contents of your package: Main unit Front panel Trim plate Remote control ISO male connector Screw x 4pcs Hexagon head screw Rubber cushion User manual Installation / Connection Caution Basic Procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Make proper input and output wire connections. 3 Install the unit to your car. 4 Reconnect the terminal of the car battery. 5 Reset the unit. Warning The unit can only be installed in a car with a 12 V DC power supply, negative ground. If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. Disconnect the battery’s negative terminal and make all electrical connections before installing the unit. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. Be sure to ground this unit to the car’s chassis again after installation. If the power is not turned ON, the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. Install this unit in the console of your vehicle. Make sure the faceplate will not hit the lid of the console (if any) when closing and opening. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30° or less. If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one that has the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car. When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). Mounting and wiring this product requires skills and experience. For safety’s sake, leave this work to professionals. If you experience problems during installation, consult your Nakamichi dealer. Wiring Connection Bluetooth External Microphone OE Steering learning Remote SUB OUT OE external remote (Purple) ISO Connector OE remote adapter (not supplied) Antenna Jack(not included) Subwoofer Output (White) (Gray-GND) (White) Steering wheel remote Rear RCA Output (Left) Front RCA Output (Left) Rear RCA Output (Right) Front RCA Output (Right) ISO Connector Wiring Chart Pin Color and function A4 Yellow A5 Blue A7 A8 Red Black Pin Color and function B1/B2 Connect to system control terminal B3/B4 Violet + / Violet/Black Grey + / Grey/Black Right rear speaker Right front speaker B5/B6 B7/B8 White + / White/Black Green + / Green/Black Left front speaker Left rear speaker Battery(+) of the power AMP or auto antenna relaycontrol terminal(Max 150MA 12VDC) Ignition(ACC) Ground EN 3 Installing the unit Installation with the half sleeve After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place. 18 Bend the appropriate tabs to hold the sleeve firmly in place. mm 112 Dashboard Screw Control panel Installation using the screw holes on the side of the unit Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side. All the mounting sleeve & screw are not included in this packing. 4 EN Basic Operation Detaches the control panel Ejects the disc USB socket Open the cover OK / Mute Encoder Volume Knob 1A battery charge USB socket Open the cover Aux-In jack When you press or hold the following button(s)... Main unit General operation Switch music listening zone for the best speaker sound. (FRONT ALL / FRONT LEFT/ FRONT RIGHT / ZONE OFF). ■ To adjust the EQ (Preset Equalizer) setting. ■ Turn On or Off the Xbass booster function. ■ To turn On or Off dynamic bass boost sound. ■ Press and hold to enter into iPod/iPhone control mode. ■ To access into the Audio Menu mode. ■ press and hold to enter into the System Menu mode. ■ Under Media playback mode to view play informations. ■ Under RDS/RBDS mode to view RDS/RBDS received information. ■ Press and hold turn On or Off the subwoofer function. ■ Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. ■ Under Media playback mode to skip track / file, press and hold to fast forward / backward. ■ Turn the unit on. Press and hold again to turn the unit off. ■ ■ OK / Mute Rotatory Volume knob ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Select the available sources (Radio, Disc, USB (USB-iPod/iPhone), SD, BT AUDIO or Aux-In ), if the power is turned on. Turn mute or restore volume. Confirms selection. Rotate it to increase or decrease the volume. Select items. Select the FM bands (FM1/ FM2/ FM3) or AM1 (MW1) / AM2 (MW2) . Under media playback to access into search mode. To answer / accept the call. During the talking, press and hold to transfer the call. To reject / end the call. Returns to the previous item. Press and hold access into the VRD display color setting mode. Pause/resume playback of a Disc, USB / SD device, iPod/iPhone. EN 5 Remote Control Operation SRC AUDIO When you press or hold the following button(s)... Main unit General operation Turn mute or restore volume. Press turn the unit on or off. Press increase the volume. Press decrease the volume. ■ ■ SRC AUDIO 6 EN Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Under Media playback mode to skip track / file, press and hold to fast forward / backward. Selects the available sources (Radio, Disc, USB (USB-iPod/iPhone), SD, BT AUDIO or Aux-In ), if the power is turned on. Press to access into the Audio Menu mode. Function Settings 1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode. 2 Press repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. [AUDIO MENU] ... Item BASS ADJUST BASS LEVEL MIDDLE ADJUST MIDDLE LEVEL TREBLE ADJUST TREBLE LEVEL BALANCE FADER SUBWOOFER ADJUST SUBWOOFER LEVEL SUBWOOFER LPF RESUME Selectable Setting Adjust the level -7 to +7. Adjust the level -7 to +7. Adjust the level -7 to +7. Adjust the balance between the right and left speakers from 12R (full right) to 12L (full left). Adjust the fader between the front and rear speakers from 12R (full rear) to 12F (full front). Adjust the level 0 to 12. Subwoofer low pass filter range: 80 / 120 / 160. Resume the preset EQ value to factory default value. [MENU] ... Item CLOCK CLOCK SET CLOCK FORMAT BEEP TONE DEMO SWC SET RGB COLOR CONNECT Selectable Setting Adjust the Hours and Minutes Select the time format 12H or 24H Turn On or Off this beep sound To automatically demo this unit’s major features cyclic on LCD display. If you car is equipped with the steering wheel remote controller, you can operate this unit using the controller. ■ Press the “OK / Mute” to access into SWC SET mode. ■ Rotate encoder volume knob to select the function you want the steering remote to learn, then press and hold the same function button on the steering wheel remote until “SUCCEED” is displayed. This unit is equipped with variable color display. Once into the RGB COLOR mode, rotating encoder volue knob to selected the LCD color. ■ COLOR SCAN (default setting); WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE 2; BLUE 1; BLUE 2; ORANGE; USER COLOR; SCAN. Check the BT connected status. [ZONE]... This innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience a more vivid spacial effect as the artist is intended to create.User can switch the music listening zone from driver to passengers for the best speaker sound settings in car. 1 Press the ZONE button,The current setting is displayed. 2 Press the ZONE repeatedly to select one of the below setting: • FRONT ALL ( All) • FRONT LEFT ( Left) • FRONT RIGHT(Right) • ZONE OFF (Off ) EN 7 Listening to the Radio Hold for about 2 seconds to memorize the current station. ■ Press briefly to recall memorized station. ■ In receive traffic, press to cancel receive the current traffic. 1 Press repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (MW2) ). 2 Press to search for a station. 3 Press repeatedly to view RDS received information. Adjust [MENU] mode settings While listening to the radio... 1 Press and hold to enter into the [MENU] mode. 2 Press repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. Item Selectable Setting Press the “OK / Mute” to access into Auto Store mode, the six strongest stations of the selected band AUTO STORE are saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2. Once into the PTY mode, press the “OK / Mute” get into program type item, and rotating encoder volume knob to selected category. ■ Available Program Type: PTY NEWS; AFFAIRS; INFO; SPORT; EDUCATE; DRAMA; CULTURE; SCIENCE; VARIED; POP M; ROCK M; (Program Type) EASY M; LIGHT M; CLASSICS; OTHER M; WEATHER; FINANCE; CHILDREN; SOCIAL; RELIGION; PHONE IN; TRAVEL; LEISURE; JAZZ M; COUNTRY; NATION M; OLDIES M; FOLK M; DOCUMENT; ALARM;A-TEST ■ ON: The unit will be searches for another station with stronger signal, but with the same program AF identification as the current station automatically. (Alternate Frequencies) ■ OFF: Cancel ■ ON: When there is traffic announcement, the unit switches to the tuner mode (regardless of the TA current mode) and begins to broadcast the announcemet on traffic conditions. When the (Traffic Announcement) trafficannouncement is over, it returns to the previous mode. ■ OFF: Traffic announcement does not cut in. Turn On or Off the RDS function. RDS On/Off Select suitable country region of the radio: USA; LATIN; EUROPE; RUSSIA(Oirt); M-EAST; ASIA; JAPAN; AREA AUST (Australia) To receive more radio stations or only stations with strong signal, you can adjust the radio sensitivity. LOCAL SEEK REMARKS: When in USA region, it will not display RDS info (PTY/AF/TA), you can hold and press button " 8 EN “ to check current RBDS station info. Listening to a Disc/ USB/SD device Press to pause. Press again to resume playback. Press to repeat one track, press again to repeat all tracks. ■ Press and hold repeat a folder. ■ ■ ■ Press to start random play, press again to cancel random play. Press and hold random a folder. Press to move next/previous folder. ■ ■ Press into search mode Press to select a track / file. Press and hold for fast forward / backward. Playing a disc USB Smart Phone 1A charging Insert the disc into the Disc Slot with label side facing up, Press the “SRC”button to select the Disc mode to start playing. 1 Open the cover marked ” “ on the front panel. 2 Insert the iPhone/Smart Phone device into the USB socket. 3 Once the iPhone/Smart Phone is connected and recognized, the iPhone/Smart Phone begins to charge. Playing a USB device 1 Open the cover marked on the front panel. 2 Insert the USB device into the USB socket. 3 Press the “SRC” button to select the USB mode to start playing. Remark: Remark: This USB is compatible with iPhone / iPod, USB stick, and play the songs in some Hand phone & recharge them. ( Subject to the brand & model of the Hand phone ) This USB only can charge Phones, but cannot play or decode music files. Listening to the other external components Playing a SD memory card 1 Press the Panel (Release) button. 2 Push the left side of the panel rightward 3 Insert the card into the card slot. 4 Close the front panel. 5 Press the “SRC” button to select the SD mode to start playing. Auxiliary input jack 3.5 mm Cable (not included) 1 Press the SRC to select AUX-IN mode. 2 Turn on the external component and start playing. EN 9 Listening to the iPod / iPhone Press to pause. Press again to resume playback. Press to repeat one track, press again to repeat all tracks. ■ Press and hold repeat a folder. ■ ■ ■ Press to start random play, press again to cancel random play. Press and hold random a folder. Press to move next/previous folder. ■ ■ Press into search mode Press to select a track / file. Press and hold for fast forward / backward. Playing a iPod / iPhone 1 Open the cover marked on the front panel. 2 Insert the USB adaptor on one end of iPod/iPhone cable into the USB socket. 3 Press the “SRC” button to select the USB-iPod/iPhone mode to start playing. Search for music on iPod / iPhone 1 Press on front panel to switch the iPod/iPhoe control mode. 2 Use the iPod / iPhone to search / operates music control. Remark: Please make sure the iPod / iPhone cable is connected correctly. And please only use original iPod / iPhone cable (not supplied) . Compatible iPod/iPhone Apple iPod and iPhone models with a 30-pin dock connector: - iPod nano (2nd generation) - iPod nano (3rd generation, 4GB only) - iPod nano (3rd generation, 8GB only) - iPod nano (4th generation) iPod/iPhone Cable (not included) - iPod nano (5th generation) - iPod classic (1st generation) Search for music on unit - iPod classic (2nd generation) - iPod touch (1st generation) 1 Press to browse iPod/iPhone menu. 2 Roate Encoder Volume knob to select the Artist search mode, - iPod touch (2nd generation) - iPod touch (3rd generation) and press “OK / Mute” to confirm. - iPod video (30GB, 80GB only) 3 Press to search alphabetically. 4 Roate Encoder Volume knob to select the Album, then press - iPhone - iPhone 3G “OK / Mute” to confirm. 5 Roate Encoder Volume knob to select desired song in the - iPhone 3GS - iPhone 4 current album, press “OK / Mute” to confirm start play. - iPhone 4s Remark: - iPhone 5 To go back to upper level of a folder, press - iPhone 5s 10 EN Operation of Bluetooth Hands-Free Press to answer / accept the call. Press and hold to transfer the call. Press to reject / end the call. ■ ■ Press to change to “BT AUDIO" mode. You can make or receive phone calls with Bluetooth-enabled To redial number phones through the unit. You can also listen to music from a 1 Press on front panel to redial. Bluetooth-enabled device. 2 Press once again , unit will display [CALLING], and the unit starts dialing the number dialed last time. Getting Started Before use the Bluetooth device, you need to pair the device to Remark: To make an outgoing call on this unit, the bluetooth the unit. Pairing needs only to be done once. connection between the unit and the phone must be active. Pairing the Bluetooth devices 1 Open your mobile phone and switch bluetooth on. Receiving a Call 2 Search for other bluetooth device with your device. 1 If there is incoming call, the phone number is displayed. if the incoming call has no phone number, [PHONE IN] is displayed. 3 Select “NAKAMICHI” in the pairing list. 4 Input the password “0000” 2 Press to answer / accept the call. 5 [Pairing OK] will be displayed on the screen if pairing is to terminate the call. successful, and the paired device will connect to the car audio 3 When conversation ends, press system automatically. Disconnect the bluetooth Call Transfer You can transfer voice from loudspeaker to mobile phones during 1 Press and hold to enter into the [MENU] mode. call. 2 Once the [ DISCONN ] is displayed, press “OK / Mute” to During talking, press and hold voice transfers from activate the manual Disconnect mode. loudspeaker to mobile phone. Re-connect the bluetooth Bluetooth Audio Streaming A2DP 1 Press and hold to enter into the [MENU] mode. 2 Once the [BT CONNECT] is displayed, press “OK / Mute” to If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on activate the manual Re-connect mode. the device through the unit. If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can use the control on the unit or its remote control to play music stored on Making a Call the device. You can dial number through the mobile phone. 1 Press SRC repeatedly to select [BT AUDIO]. 1 Use the Mobile Phone to dial and make an outgoing call. 2 Press to start play, press it again to pause. 2 Once completed the dialing, [CALLING] is displayed. 3 To track up/down, press EN 11 Product Information General Power Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15A Suitable Speaker Impedance: 4 -8 Aux-In level: 800mV Audio Section Maximum Power Output: Mosfet 50W x 4 Channels Continous Power Output: 24W x 4 RMS Pre-AMP Output Voltage: 4 V Subwoofer Output Voltage: 3 V Bluetooth Output power: Class 2 ISMISM Band Frequency band: 2.402-2.480GHz 2.4000GHz-2.4835GHz Band Range: 3 meters (free space) Standard: Bluetooth 2.0 specification About Audio file ■ ■ ■ ■ ■ USB or memory file system: FAT16, FAT32 MP3/WMA bit rate: 32-320kbps and varible bit rate MP3 sampling frequencies: 8-48kHz WMA sampling frequencies: 32kHz, 44.1kHz, 48kHz ID3 tag v1.0 or later FM tuner section Frequency Range: 87.5 - 107.9MHz Usable Sensitivity: Better than 15dB at S/N 30dB AM tuner section Frequency Range: 530 - 1710KHz Usable Sensitivity: Better than 45dB at S/N 26dB USB devices USB Flash Memory: USB 1.1 & 2.0 Compatible Memory Card Support type of memory card: SD/SDHC 12 EN USB Smart Phone 1A charging Output Voltage : 5 V DC Output Current : 1000 mA (1A) www.nakamichicaraudio.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : hp Create Date : 0000:01:01 00:00:00 Modify Date : 0000:01:01 00:00:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creation Date--Text : Mod Date--Text : Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : CorelDRAW Version 12.0 Metadata Date : 2015:12:02 14:06:27+08:00 Document ID : uuid:9752787e-e9d8-4223-becd-e07315587bde Instance ID : uuid:ad39b2f5-af44-4976-b5bc-940906aa3b22 Format : application/pdf Title : NA788S-C ENG+SP IM T150123 Creator : hp Page Count : 13EXIF Metadata provided by EXIF.tools