Sony Group NASSV20I Network Audio System/Server User Manual NAS SV20i SV20Di
Sony Corporation Network Audio System/Server NAS SV20i SV20Di
User manual
Network Audio System/Server Getting started Network connections Enjoying audio content Operating Instructions Enjoying Sony MultipleRoom Products Additional information Troubleshooting Precautions/Specifications ©2010 Sony Corporation Printed in China 4-192-583-11(1) NAS-SV20i/SV20Di NAS-SV20i/SV20Di 4-192-583-11(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. The nameplate is located on the bottom exterior of the main unit (NAS-SV20i/SV20Di). For customers in the United States Owner’s Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The following indications are located on the bottom exterior of the main unit (NAS-SV20i/SV20Di). Important Safety Instructions 1) 2) 3) 4) 5) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/ accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined 2GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\020REG.fm masterpage: Right_3col 010COV.book Page 3 Monday, June 14, 2010 9:12 AM by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Properly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals in order to meet FCC emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). For customers in Canada Properly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). For customers in Europe Properly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/ For customers who use this product in the following countries: Norway: Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard in Norway. France: The WLAN feature of this Network Audio System/Server shall exclusively be used inside buildings. Any use of the WLAN feature of this Network Audio System/Server outside of the buildings is prohibited on the French territory. Please make sure that the WLAN feature of this Network Audio System/Server is disabled before any use outside of the buildings. (ART Decision 2002-1009 as amended by ART Decision 03-908, relating to radio-frequencies use restrictions.) Italy: Use of the RLAN network is governed: • with respect to private use, by the Legislative Decree of 1.8.2003, no. 259 (“Code of Electronic Communications”). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted; • with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree 28.5.2003, as amended, and Art. 25 (general authorization for electronic communications networks and services) of the Code of electronic communications. This product is intended to be used in the following countries: AT, BE, CH, CZ, DE, DK, ES, FI, FR, GB, GR, HU, IE, IT, NL, NO, PL, PT, RO, SE, SK 3GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\020REG.fm masterpage: Left_3col 010COV.book Page 4 Monday, June 14, 2010 9:12 AM Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The 4GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\030INT.fm masterpage: Right_L1 010COV.book Page 5 Monday, June 14, 2010 9:12 AM Before operating this product About copyright protection Music data cannot be used without the permission of the copyright holder except when used solely for personal enjoyment. About the illustrations used in this manual Illustrations and screens used in this manual may vary from the actual screens. The model for the USA is basically used for the illustrations in this manual. However, the illustrations of a certain model which may have different features are used in this manual as well, to explain the feature. How to use this manual This manual explains how to operate the unit mainly using the buttons on the remote control. Buttons on the main unit with the same or similar name as that on the remote control can be used to perform the same operations. About services that can be used in conjunction with an Internet connection Please note that Internet-based services are subject to change or termination without notice. Malfunctions that occur during the normal use of the unit will be repaired by Sony in accordance with the conditions defined in the limited warranty for this unit. However, Sony will not be liable for any consequences arising from a failure to play caused by a damaged or malfunctioning unit. 5GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fm masterpage: Left_L1_1col 010COV.book Page 6 Monday, June 14, 2010 9:12 AM Table of Contents Before operating this product ...................................................................5 Features of this unit..................................................................................9 Enjoying various music ......................................................................9 Using the unit with DLNA-compliant devices .........................................9 Getting started Checking the supplied accessories........................................................10 Guide to parts and controls ....................................................................11 Remote control ...............................................................................11 Main unit .......................................................................................13 Display window ..............................................................................14 Preparing the unit and the remote control...............................................15 Connecting the antenna and the power cord .......................................15 Inserting batteries into the remote control ...........................................16 Using an iPod/iPhone ......................................................................16 Basic operations ....................................................................................17 Turning on this unit ..........................................................................17 Setting the network standby mode .....................................................18 Selecting items with the unit .............................................................18 Entering text...................................................................................19 Performing initial setup operations.........................................................21 Setting the clock.....................................................................................23 Setting the clock through an Internet connection ..................................23 Network connections Connecting the unit to your home network (network settings) ................25 Checking the wireless LAN environment of your home network ..............26 Searching for an access point and setting up a wireless network (access point scan) .....................................................................26 Setting up a wireless network using an access point compliant with WPS ........................................................................................28 Setting up a wired network ...............................................................30 Setting up the IP address/proxy server ...............................................31 Confirming the network settings ........................................................32 6GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fm masterpage: Right_1col 010COV.book Page 7 Monday, June 14, 2010 9:12 AM Enjoying audio content Listening to an iPod or iPhone ............................................................... 33 Selecting the operation mode ........................................................... 34 Listening to DAB/DAB+ (available for the UK model only)...................... 36 Performing a DAB/DAB+ Initial Scan ................................................. 36 Tuning in a DAB/DAB+ station .......................................................... 36 Presetting DAB/DAB+ stations ......................................................... 37 Listening to audio content stored on a server ......................................... 38 Setting up the server ....................................................................... 38 Playing audio content stored on a server ............................................ 41 Listening to music services .................................................................... 44 Presetting stations .......................................................................... 45 Enjoying a variety of music services .................................................. 45 Listening to audio content from an external component (Audio In) ......... 47 Listening to the playback sound of the unit with an external component (Audio Out)......................................................................................... 48 Changing the play mode ........................................................................ 49 Searching for an item using a keyword................................................... 50 Enjoying Sony Multiple-Room Products Using the PARTY STREAMING function ............................................... 51 Starting a PARTY ........................................................................... 51 Joining a PARTY ............................................................................ 52 Connecting the unit with other DLNA-compliant devices........................ 53 Playing audio content on the unit using a controller .............................. 54 Streaming audio content to a renderer (network controlled player) using a controller ................................................................................ 54 Playing audio content streamed from a server (such as a computer) using a controller ................................................................................ 55 Additional information Setting up the functions related to network operations ........................... 56 Setting up access permission ........................................................... 56 Using lists of permitted and non-permitted devices .............................. 56 Using the SMART SELECT function .................................................. 57 Setting the PARTY STREAMING function .......................................... 58 Naming the unit .............................................................................. 58 Changing the sound setting ................................................................... 59 Generating a more dynamic sound (Dynamic Sound Generator X-tra) .... 59 Selecting a sound style .................................................................... 59 Turning the operating sound on or off ................................................. 59 7GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fm masterpage: Left_1col 010COV.book Page 8 Monday, June 14, 2010 9:12 AM Using the timer.......................................................................................60 Using the Sleep Timer .....................................................................60 Using the Play Timer .......................................................................60 Viewing the information of the unit..........................................................62 Managing the system.............................................................................63 Updating the system application ........................................................63 Formatting the system .....................................................................64 Troubleshooting Troubleshooting.....................................................................................65 Messages ......................................................................................70 Precautions/Specifications Precautions ...........................................................................................72 Specifications ........................................................................................73 iPod/iPhone models that are compatible with this unit............................74 The menu tree for the settings menu ......................................................75 Glossary ................................................................................................76 Index......................................................................................................78 8GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\040FEA.fm masterpage: Right_L1_1col 010COV.book Page 9 Monday, June 14, 2010 9:12 AM Features of this unit Enjoying various music You can enjoy listening to music from sound sources with large amounts of music content. You can listen to your iPod or iPhone (page 33), play audio content stored on a server (such as your computer) (page 38), and play audio content streamed by music services via the Internet (page 44). Music Services Audio In The unit Home Network (server) DAB/DAB+ (available for the UK model only) iPod/iPhone Using the unit with DLNA-compliant devices This unit complies with the DLNA standard. You can listen to music in various ways using the unit together with other DLNA-compliant devices. Connecting it to other DLNA devices allows you to enjoy audio content stored on a server, or stream audio content to other devices, even though they are all placed in different rooms (page 53). Furthermore, the PARTY STREAMING function of the unit allows you to play back audio content with other devices that have a PARTY STREAMING function at the same time (page 51). You can use an iPod/ iPhone placed on the unit, a server (a computer, etc.), music services, or an external device connected to the AUDIO IN jack of the unit as a sound source for the PARTY STREAMING function. The unit Audio streaming/ PARTY STREAMING About DLNA DLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as music data, image data, etc.) over a home network. 9GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Left_L0 010COV.book Page 10 Monday, June 14, 2010 9:12 AM Getting started Checking the supplied accessories ❏ Remote control (1) ❏ iPod Dock Adapters (2) The adapter number qs or qg is shown on the bottom-rear of each Dock Adapter. When you use other iPod models, a compatible Dock Adapter from Apple Inc. will need to be purchased separately. qs: For iPhone ❏ R6 (size AA) batteries (2) qg: For iPhone 3G and iPhone 3GS ❏ AC adaptor (1) ❏ DAB/DAB+ wire antenna (1) (for the UK model only) ❏ Power cord (1) Models for the USA and Canada Models for Europe (except for the UK model) Model for the UK ❏ Operating Instructions (this manual) (1) This manual provides full explanations of the various settings, operations and the network connection procedure. This manual also contains precautions for the safe use of the unit. ❏ Quick Setup Guide (1) This manual explains how to set up the network connections and use the functions that can be used in conjunction with the network connections. If you find any accessories missing or damaged, please contact your nearest Sony dealer. 10GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right_L1 010COV.book Page 11 Monday, June 14, 2010 9:12 AM Guide to parts and controls Getting started Remote control A SLEEP and TIMER buttons • SLEEP button (page 60) Use to set or confirm the sleep timer setting. • TIMER button (page 61) Use to set the timer. B Numeric*/text buttons Use to select a track during playback or to enter text (pages 19, 27, 37, 45, 58). C MEMORY button Use to preset DAB/DAB+ stations (UK model only) (page 37) or stations of the music services (page 45). D ALPHABET SEARCH button Use to search for an item using a keyword (page 50). E FUNCTION button Use to select a function (pages 18, 33). The unit has operating functions based on the sound source that the unit can play (iPod & iPhone function, Home Network function, etc.). Each press of this button changes the function in turn. F M/m/, m/M buttons • . and > buttons (pages 34, 36) Use to find the beginning of the current, the previous, or the next track. Press and hold the button to find a point in a track when the iPod & iPhone function is selected. Use to select a preset DAB/DAB+ station, or the previous or the next DAB/DAB+ station in a service component list (UK model only). • m/M buttons (page 34) Use to find a point in a track. S Operation buttons • X (pause) button • x (stop) button • N (play) button* T PLAY MODE button Use to select a play mode (page 49). * An asterisk (*) indicates buttons that have a tactile dot (number “5” button, VOLUME + button and N (play) button). I iPod MENU button Use to display iPod/iPhone content lists, or use to go back to the previous iPod/iPhone content list (page 34). J DISPLAY button Use to display various information such as the time information of a track, an artist name, an album name, clock, etc. (page 34) K ?/1 (power) button Use to turn the power on or off (page 17). L DIMMER button Use to change the brightness of the display. Each press of this button changes the brightness of the display to bright or dark. M VOLUME +*/– button Use to adjust the volume. N MUTING button Use to turn off the sound. O DSGX and SOUND EFFECT buttons • DSGX button (page 59) Use to generate more dynamic sound (Dynamic Sound Generator X-tra). • SOUND EFFECT button (page 59) Use to select a preset customized sound effect. P SETTINGS button Use to display the settings menu (pages 18, 26, 56). Use to enter clock, network, and other system settings. Q OPTIONS button Use to display the options menu (pages 18, 27, 35, 57). Menu items will vary according to the selected function. R PARTY button Use to operate the PARTY STREAMING function (page 51). Press and hold the button for a few seconds to start or close a PARTY. 12GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right 010COV.book Page 13 Monday, June 14, 2010 9:12 AM Main unit Getting started A Remote sensor B ?/1 (power) button and the on/standby indicator • ?/1 (power) button (page 17) Use to turn the power on or off. • On/standby indicator (page 17) The color indicates the power status of the unit. – Green: The unit is turned on. – Red: The “Network Standby” mode of the unit is set to “Off.” – Amber: The “Network Standby” mode of the unit is set to “On.” C Display window For details on the contents of the display, see “Display window” (page 14). D iPod/iPhone dock Place an iPod or iPhone into the iPod/iPhone dock to listen to audio content stored on the iPod/iPhone (page 16). • V/v buttons (page 18) Use to select an item that is listed on the display. Use to move the focus up or down. • OPTIONS button (pages 18, 27, 35, 57) Use to display the options menu. Menu items will vary according to the selected function. • FUNCTION button (pages 18, 33) Use to select a function. • BACK button (pages 18, 27, 34) Use to go back to the previous display. • ENTER button (page 18) Use to enter a selected item or setting. F PARTY button Use to operate the PARTY STREAMING function (page 51). Press and hold the button for a few seconds to start or close a PARTY. G VOLUME +/– button Use to adjust the volume. E Touch panel operation buttons • NX (play or pause) button • ./> buttons (pages 34, 36) Use to find the beginning of the current, the previous, or the next track. Press and hold the button to find a point in a track. • TUNING +/– buttons (UK model only) Use to select a preset DAB/DAB+ station, or the previous or the next DAB/DAB+ station in a service component list. 13GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Left 010COV.book Page 14 Monday, June 14, 2010 9:12 AM Display window I DSGX indicator Lights up when the DSGX function is set to “DSGX On” (page 59) J Play mode indicators Light up when the play mode is set (page 49). A Function indicators Light up when a function is selected (pages 18, 33). B Text information Displays various information such as track names, album names, artist names, clock, progress bar, etc. The following symbols appear on the display. The meaning of each symbol is as follows. Symbol Description The message is continued to/ from the next/previous page. Press M/m to see the entire text. There are selectable items after this item (for example, the menu has a deeper level). indicator Lights up when the playback range is set to “Current Folder” (factory setting) or “Parent Folder” while the unit is using the Home Network function (page 42). D PARTY indicator Lights up when the PARTY STREAMING function is active (page 51). E Wireless LAN signal strength indicator This antenna icon indicates the strength of the wireless LAN signal. More segments indicate a stronger signal. F NX (play/pause) indicator G Tuner reception indicators (UK model only) Light up when the DAB/DAB+ function is active (page 36). H Timer indicators Light up when the Sleep Timer or Play Timer is set (page 60). 14GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right_L1 010COV.book Page 15 Monday, June 14, 2010 9:12 AM Preparing the unit and the remote control Getting started Connecting the antenna and the power cord Note If you place the unit in an unstable location, it may move when you connect or disconnect cables. Hold the unit firmly when you connect or disconnect cables. WARNING DO NOT plug the power cord into a wall outlet until all other connections have been made. DAB/DAB+ wire antenna (aerial)* Power cord AC adaptor To a wall outlet * The DAB/DAB+ wire antenna (aerial) and the ANTENNA DAB 75 : are available for the UK model only. Connect the DAB/DAB+ wire antenna (aerial) to the ANTENNA DAB 75 : terminal (UK model only). Use an external DAB/DAB+ antenna for a more robust DAB/DAB+ signal. It is recommended you only use the supplied DAB/DAB+ wire antenna for areas of strong DAB/DAB+ reception or as a temporary measure until you install an optional external antenna. Use a 75 : coaxial cable with male F type connector to connect the unit to an external antenna. Be sure that the antenna is fully extended. DAB/DAB+ wire antenna (aerial) 15GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Left 010COV.book Page 16 Monday, June 14, 2010 9:12 AM Connect the power cord to the AC adaptor. Remove the battery compartment lid, and then insert the supplied R6 (size AA) batteries (E end first) matching the polarities as shown below. When the remote control is no longer able to operate the unit, replace both batteries with new ones. AC adaptor Power cord Inserting batteries into the remote control Connect the AC adaptor to the unit, and then plug the power cord into a wall outlet. To the DC IN 19.5 V jack Using an iPod/iPhone To a wall outlet AC adaptor Power cord WARNING DO NOT plug the power cord into a wall outlet until other connections have been made. Insert a dock adapter into the iPod/iPhone dock. When using an iPod model, use the dock adapter supplied with your iPod. When using an iPhone model, use the iPod Dock Adapter supplied with this unit. For details on the iPod Dock Adapters, refer to the operating manual supplied with the iPod Dock Adaptors. Universal dock adapter for iPhone iPod/iPhone dock To remove the universal dock adapter for iPhone, pull it up with your fingernail or a flat object using the slot inside the adapter. 16GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right_L1 010COV.book Page 17 Monday, June 14, 2010 9:12 AM Basic operations ?/1 FUNCTION SETTINGS M/m/ENTER BACK OPTIONS Turning on this unit To turn off the unit Press ?/1 on either the remote control or the main unit. When the unit is turned off and enters the standby mode, the color of the on/standby indicator changes. The unit has two standby modes, network standby - off and network standby - on. For details, see “Setting the network standby mode” (page 18). • Network standby - off mode (factory setting) This standby mode consumes less power than network standby - on mode, though the unit takes more time to resume operations when powered on again. The on/standby indicator lights up in red in this mode. • Network standby - on mode In this standby mode, the unit is always connected to the network and remains partially active to quickly resume operations when controlled over the network, or powered on again. In this mode, the on/standby indicator lights up in amber and the clock appears on the display. To set the network standby mode, see “Setting the network standby mode” (page 18). Getting started This section explains the basic operations of the unit. Connect the power cord to a wall outlet. When you connect the power cord to a wall outlet, the unit turns on once and the on/ standby indicator lights up in green. After a while, the unit turns off automatically and the on/standby indicator changes to red. Press ?/1 (power). The unit turns on and the on/standby indicator lights up in green. When the unit is turned on for the first time after purchase, you are required to make the initial settings. If this is the case, see “Performing initial setup operations” (page 21). 17GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Left 010COV.book Page 18 Monday, June 14, 2010 9:12 AM Setting the network standby mode Selecting items with the unit While the “Network Standby” mode is set to “On,” the unit can always be connected and controlled over the network. You can use the M/m/ENTER buttons to select an item (menu item, artist, track, etc.) and enter the selection. Press SETTINGS to enter the settings menu. Press M/m to select “Network Standby” and press ENTER. Press M/m to select “Off” or “On” and press ENTER. Display Off On Description The unit consumes less power than the network standby - on mode, though the unit takes more time to resume operations when powered on again. The on/standby indicator lights up in red. The unit is connected to the network even though the power of the unit is turned off, and resumes operations when controlled over the network. The on/standby indicator lights up in amber. : Factory setting) When a list of items (artists, tracks, menu items, etc.) is displayed, press M/m to select the desired item. The currently selected item is focused. Press and hold M/m to scroll the display. Press BACK to go back to the previous display. Press ENTER. The selected item is set or the selected process is carried out. To select a function The unit has operating functions based on the sound source that the unit can play (iPod & iPhone function, Home Network function, etc.). Press FUNCTION repeatedly to select the desired function. About menus for this unit This unit has two menus, the settings menu and the options menu, and they allow you to make various settings. • Settings menu (page 75) Press SETTINGS to display the settings menu. You can make various settings such as network settings, network standby settings, music services settings, etc. • Options menu Press OPTIONS to display the options menu. Menu items will vary according to the selected function. 18GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right 010COV.book Page 19 Monday, June 14, 2010 9:12 AM Entering text Example of a character input display Entering text may be required during some setup operations such as network settings. You can enter text using the remote control. The display shown below is an example of the character input display that appears when you are searching for an item using a keyword. A symbol that indicates the end of the text string currently being entered Cursor Getting started Type of characters and numbers Current location of the cursor/ number of characters you have entered How to enter text A Numeric/text buttons Press the button with the desired letter (ABC, DEF, etc.). Press repeatedly until the desired letter appears. B CLEAR button Press this button to erase a letter that was just entered. C M/m/1 .,!@´`:;() []{}<>1 abc2 ABC2 def3 DEF3 ghi4 GHI4 jkl5 JKL5 mno6 MNO6 pqrs7 PQRS7 tuv8 TUV8 wxyz9 WXYZ9 /\|-~=_+# $%&^“*? (space) 0 /\|-~=_+# $%&^“*? (space) 0 20GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fm masterpage: Right_L1 010COV.book Page 21 Monday, June 14, 2010 9:12 AM Performing initial setup operations WARNING Do not disconnect the power cord while the unit is making the initial setup operations. Doing so may cause the unit to malfunction. When the “Start setup?” display appears, select “OK.” Getting started When the unit is turned on for the first time after you purchase it, initial setup operations are required. The initial setup includes the initial setting procedure for the unit (this will be performed automatically), network settings, the clock settings, and obtaining a service list (for the Music Services function). When you are indicated to set the network or the clock, refer to the respective pages. Entering characters will be required during the setup operations. For details on entering characters, see “Entering text” (page 19). The unit starts making the initial settings. When the “Network Settings” display appears, select “Yes.” The “Connection” display appears. Before you start setting up a network, check the chart on page 25 to decide which connection method you will use to connect the unit to your home network. Then, refer to the respective page (as follows) to perform the setup operation for the connection method chosen. When you use a wireless connection ?/1 M/m/. Find a point in a track Press and hold m/M (./> on the main unit) while playing, and release it at the desired point. Return to the previous menu or reselect a menu while playing Press BACK or iPod MENU. You can return to the previous menu or reselect a menu much like using the Menu button or the touch operation of the iPod/iPhone. To go back to the playback display, press OPTIONS and select “Now Playing” (only when “Remote UI Mode” is set to “On”). Selecting the operation mode The unit has two operation modes for the iPod & iPhone function, remote UI mode - on and remote UI mode - off. • Remote UI mode - on: You can operate your iPod/iPhone with the buttons on the unit and the remote control. iPod/ iPhone content lists are also displayed on the unit. With the remote UI mode - on state, a play mode that has been set on the iPod/iPhone will be in effect when it is placed on the iPod/iPhone dock of the unit. A play mode set while the iPod/iPhone is placed on this unit will also be in effect when the iPod/iPhone is removed from the iPod/iPhone dock. 34GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 35 Monday, June 14, 2010 9:12 AM • Remote UI mode - off (factory setting): You can use the buttons and controls on your iPod/iPhone to operate it. You can also use some buttons on the unit and the remote control, but the iPod/iPhone content lists are not displayed on the unit. Notes • An iPod/iPhone cannot be charged when the unit is • • • • Note You cannot use the buttons and controls on your iPod/ iPhone in the remote UI mode - on mode. • • To change the operation mode, do the following. • While the iPod & iPhone function is selected, press OPTIONS to enter the options menu. • Select “Remote UI Mode.” Select “On” or “Off” ( ). Enjoying audio content • turned off (in standby status) and in the network standby - off mode. For details on the charging status, refer to the operating manual of your iPod/iPhone. Charging is possible while the power cord of the unit is connected to a wall outlet. When placing or removing the iPod/iPhone, handle the iPod/iPhone at the same angle as that of the iPod/ iPhone connector on the unit and do not twist or turn the iPod/iPhone to prevent connector damage. Do not carry the unit with an iPod/iPhone set on the iPod/iPhone dock. Doing so may cause a malfunction. When placing or removing the iPod/iPhone, brace the unit with one hand and take care not to press the controls of the iPod/iPhone by mistake. To change the volume level, use the VOLUME +/– button on the unit or the remote control. The volume level does not change when adjusted on the iPod/ iPhone. The iPod/iPhone dock on the unit is designed for an iPod/iPhone only. You cannot connect any other portable audio players. To use an iPod/iPhone, refer to the operating manual of your iPod/iPhone. Sony cannot accept responsibility in the event that data recorded on the iPod/iPhone is lost or damaged when using an iPod/iPhone with this unit. If the album shuffle mode is set on the iPod/iPhone, “SHUF” lights up to the display when you connect the iPod/iPhone on the unit. If the album shuffle repeat mode is set on the iPod/iPhone, “SHUF” and “REP” light up on the display. (Note that this happens only when “Remote UI Mode” is set to “On.”) For details on the play mode of the unit, see page 49. When the album shuffle mode or album shuffle repeat mode is set on the iPod/iPhone, the unit does not shuffle tracks, but albums. If you want to shuffle tracks, set the play mode of the iPod/iPhone to shuffle or shuffle repeat mode. : Factory setting) To use the unit as a battery charger You can use the unit as a battery charger for an iPod/iPhone. The charging begins when the iPod/ iPhone is placed on the iPod/iPhone dock. An iPod/iPhone can be charged when: • the unit is turned on. • the unit is turned off (in standby status) in the network standby - on mode. To stop charging the iPod/iPhone Remove the iPod/iPhone from the unit. 35GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left_L1 010COV.book Page 36 Monday, June 14, 2010 9:12 AM Listening to DAB/DAB+ (available for the UK model only) You can tune in DAB/DAB+ stations. Presetting stations in advance allows you to recall them by number. DAB/DAB+ stations can be received with the UK model only. Tip You can perform the Initial Scan manually. Press OPTIONS and select “Initial Scan.” When “Start Initial Scan? Press ENTER.” appears, press ENTER. Notes • All preset stations that have been stored in the unit are MEMORY • FUNCTION M/m/ENTER cleared when you perform a DAB/DAB+ Initial Scan or when scanning is cancelled. Before unplugging the DAB/DAB+ wire antenna (aerial), make sure the unit is turned off to preserve your own DAB/DAB+ settings. BACK ./> DISPLAY Performing a DAB/DAB+ Initial Scan When you select the DAB/DAB+ function for the first time after purchase, the unit automatically starts a DAB/DAB+ Initial Scan and obtains a DAB/DAB+ service component list. However, you can perform a DAB/DAB+ Initial Scan manually. Tuning in a DAB/DAB+ station Be sure that the DAB/DAB+ Initial Scan has been performed and a service component list has been created. Press FUNCTION repeatedly to select the DAB/DAB+ function. “DAB” lights up on the display. Press FUNCTION repeatedly to select the DAB/DAB+ function. “DAB” lights up on the display. When “Start Initial Scan? Press ENTER.” appears, press ENTER. Press ./>. The unit tunes in to the previous or the next DAB/DAB+ station on the service component list. Station name Channel label The DAB/DAB+ Initial Scan starts. When scanning is completed, a service component list (a list of available DAB/DAB+ stations) is created. DLS (Dynamic Label Segment) 36GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 37 Monday, June 14, 2010 9:12 AM Press DISPLAY repeatedly to view information such as ensemble label or frequency of the current station. Press BACK to return to the service component list. Tip For better broadcast reception, try changing the direction or location of the antenna (aerial). For example, position the antenna near or outside a window. If the reception does not improve, it is recommended that you connect an optional external antenna. Keep the DAB/DAB+ antenna away from the power cord, remote control, or AC adaptor, to avoid picking up noise. Presetting DAB/DAB+ stations By presetting DAB/DAB+ stations, you can easily reselect them by using the corresponding preset number. You can preset up to 20 DAB/DAB+ stations. Tune in the desired DAB/DAB+ station. Press MEMORY. Press M/m to select a preset number. Press ENTER. Notes • When tuning in a DAB/DAB+ station, it may take a few seconds before you hear any sound. A list of “Preset Memory” appears. Enjoying audio content • When tuning in a DAB/DAB+ station, primary service is automatically received when secondary service ends. Other operations To Do the following Select different services Press ./> repeatedly to select the desired service. Press BACK to display the service component list, press M/m to select the desired service, and then press ENTER. Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly. Select the tuning mode Go back to the DAB/ DAB+ reception display from a list display. Press BACK repeatedly until the “Tuning Mode” display appears, and then select “All Services” or “Preset.” To preset another service, repeat the procedure from step 1. Tips • Secondary services can also be preset. • You can preset the station using the options menu. With the desired station tuned in, press OPTIONS and select “Preset Memory,” press M/m to select a preset number, and then press ENTER to enter the station. To listen to a preset DAB/DAB+ station Press FUNCTION repeatedly to select the DAB/DAB+ function. The unit automatically starts playing the station that have received the last time. Press OPTIONS and select “Now Playing.” Press BACK repeatedly until the “Tuning Mode” display appears. Select “Preset,” then select the desired preset station. Tip You can press the numeric button that corresponds with the preset number to select the preset station directly. 37GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left_L1 010COV.book Page 38 Monday, June 14, 2010 9:12 AM Listening to audio content stored on a server This unit can play audio content that is stored on a server device (such as a computer) that supports the DLNA (Digital Living Network Alliance) standards. To listen to audio content stored on a server • First of all, you need to connect the unit to your home network. t See “Connecting the unit to your home network (network settings)” (page 25) • When you connect the unit to a home network, you need to set up the server. t See “Setting up the server” (page 38) About DLNA DLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as music data, image data, etc.) over a home network. Setting up the server To enjoy listening to audio content stored on your server with this unit, you must set up the server in advance. The following server devices are compatible with this unit. • Sony VAIO Media plus 2.0 • Sony NAS-S500HDE, NAS-S55HDE* HDD Network Audio System • Microsoft Windows Media Player 12 installed on Windows 7 (page 38) • Microsoft Windows Media Player 11 installed on Windows Vista/XP (page 40) * These models may not be available in some countries/ areas. If the server has a function that limits access from other devices, you must change the setting on the server to allow the unit to access the server. This section explains how to set up Windows Media Player when using it as a server. For details on the settings of other server devices, refer to the operating manuals or help of the respective devices or applications. x When using a computer equipped with Windows 7 This section explains how to set up a manufacturer-installed version of Windows Media Player 12 for Windows 7 as a server to connect with this unit. For details on how to operate Windows Media Player 12, refer to the help of Windows Media Player 12. Note The items displayed on the computer may be different from the ones shown in this section, depending on the version of the operating system or the computer environment. For details, refer to the help of your operating system. 38GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 39 Monday, June 14, 2010 9:12 AM Go to [Start] - [Control Panel]. Select [Change advanced sharing settings]. Select [View network status and tasks] under [Network and Internet]. Select [Choose media streaming options...] from [Media streaming]. If [Media streaming is not turned on] appears in the Media streaming options window, select [Turn on media streaming]. Select [Allow All]. Enjoying audio content The [Network and Sharing Center] window appears. Tip If the desired item does not appear in the computer display, try to change the display type used by the Control Panel. Select [Public network] under [View your active networks]. If it shows other than [Public network], go to step 6. The [Allow All Media Devices] window opens. If all the devices in the local network are set to [Allowed], select [OK] and close the window. The [Set Network Location] window appears. Select [Home network] or [Work network] according to the environment in which the unit is being used. Follow the instructions that appear on the computer display according to the environment in which the unit is being used. When the settings have been completed, confirm that the item under [View your active networks] has been changed to [Home network] or [Work network] in the [Network and Sharing Center] window. 10 Select [Allow all computers and media devices]. 39GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left 010COV.book Page 40 Monday, June 14, 2010 9:12 AM 11 12 Select [OK] to close the window. Connect the unit to the server. After you finish setting up Windows Media Player 12, refresh the server list of the unit and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 43). The [Network and Sharing Center] window appears. Select [Customize]. x When using a computer equipped with Windows Vista/ Windows XP This section explains how to set up Windows Media Player 11 installed on Windows Vista/ Windows XP*, as a server to connect with this unit. For details on how to operate Windows Media Player 11, refer to the help of Windows Media Player 11. The [Set Network Location] window appears. Add a check mark to [Private] and select [Next]. Confirm that the [Location] has been changed to [Private] and select [Close]. Confirm that [(Private network)] is displayed in the [Network and Sharing Center] window and close the window. If a check is not added next to [Share my media] in the [Media Sharing] window that is displayed in step 3, add a check mark to [Share my media], then select [OK]. * Windows Media Player 11 is not manufacturerinstalled on Windows XP. Access the Microsoft web site, download the installer, and then install Windows Media Player 11 on your computer. Go to [Start] - [All Programs]. Select [Windows Media Player]. Windows Media Player 11 starts up. Select [Media Sharing...] from the [Library] menu. If you are using Windows XP, go to step 9. When is displayed, select [Networking...]. A list of connectable devices is displayed. 40GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 41 Monday, June 14, 2010 9:12 AM 10 Select [Settings...] that appears beside [Share my media to...]. 11 Add a check mark to [Allow new devices and computers automatically] and select [OK]. Note Uncheck this item after you confirm that the unit can connect to the server and play audio data on the server in step 12. 12 Playing audio content stored on a server The unit can play audio content stored on the server in the MP3, LinearPCM, WMA, AAC* and HE-AAC formats. Audio content with copyright protection (Digital Rights Management) cannot be played by this unit. * The unit can play AAC files with the extension of “.m4a” only. Connect the unit to the server. After you finish setting up Windows Media Player 11, refresh the server list of the unit and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 43). FUNCTION Enjoying audio content M/m/ENTER BACK Press FUNCTION repeatedly to select the Home Network function. Select the server to be connected. When the server list appears, press M/m to select the server. If the server list does not appear, follow the procedure outlined in “To refresh the server list” (page 43) to find the server. Note Even if the power of the server device on the server list has been turned off, the unit turns the server on automatically if the server supports the Wake-onLAN standard. If the server does not support the Wake-on-LAN standard, turn on the server in advance. For details on settings or operations of Wake-on-LAN of your server, refer to the operating manual or help of your server. Select the item you want to play. The items that are displayed (tracks, artists, albums, genres, folder name, etc.) depend on the connected server. • Press M/m to select the item. • Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly. 41GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left 010COV.book Page 42 Monday, June 14, 2010 9:12 AM • Press BACK to go to the next higher directory. • Press ENTER to go to the next lower directory. Select the track you want to play and press ENTER. To Do the following Go to the beginning of the current track, previous track, or next track Press ./> repeatedly. Reselect the item you want to play Press BACK repeatedly until the desired directory appears. Or press OPTIONS, select “To Server Top,” and then select the item. To go back to the playback display, press OPTIONS and select “Now Playing.” Change the playback range*1*2 Press OPTIONS and select “Playback Range.” You can select the playback range from “Current Folder” (factory setting) or “Parent Folder.” When one of these playback range settings is selected, lights up on the display. Check the details of the selected item Press OPTIONS and select “Information.” You can see the detailed information of the selected item (content, folder, server, etc.). The unit starts playing the selected track and the playback display appears. Make sure that there is sound output from the speakers of the main unit. Artist name Track (item) number Track name Elapsed time Codec Tips • If you select a folder (such as an artist folder, genre • folder, etc.) and press the N button, the unit plays all items in the selected folder. The track on the server that was playing when the unit was last turned off will start playing again when the unit is turned on again (only if the power cord of the unit was not disconnected from the wall outlet). Notes • Tracks that the unit cannot play appear on the display as • • well. You cannot sort a list of playable tracks. Tracks that cannot be played on the unit are skipped during playback. If you disconnect the power cord from the wall outlet, any information on the track on the server that was playing when the unit was last turned off will be erased. It may take a while for the display to change while the unit is searching for an item in a folder that contains a large amount of audio content. When you search for an item in a folder that has large amount of audio content, you can search for an item using a keyword (page 50). Other operations To Do the following Pause playback Press X during playback. Press N to resume playback. Stop playback Press x. Find a point in a track Press and hold m/M (./> on the main unit) during playback and release it at the desired point. View various Press DISPLAY repeatedly. information while You can check the album the playback display name and the clock. appears*3 *1 If you change the playback range while the unit is playing a track, the playback will stop once when you select the playback range, then start playing the same track again from the beginning. *2 When you set “Playback Range” to “Current Folder” or “Parent Folder,” the unit plays audio content as follows. • When you select “Current Folder,” the unit plays tracks in the current folder. • When you select “Parent Folder,” the unit plays: – tracks in the parent folder. – tracks in folders contained in the parent folder. The term “parent folder” used in this section means a folder one level higher in the structure tree than the folder that contains the currently selected item. *3 You can view this information both when the unit is stopped and when it is playing a track, unless a list of items is displayed. 42GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 43 Monday, June 14, 2010 9:12 AM To refresh the server list If you cannot find the desired server in the server list (such as when you add a new server on the network but it does not appear on the server list, or when the server you normally use does not appear in the server list), refresh the server list. Press FUNCTION repeatedly to select the Home Network function. If the unit automatically connects to the server that it was connected to the last time, press BACK repeatedly until the server list appears. Enjoying audio content While the unit is displaying the server list, press OPTIONS to enter the options menu and select “Refresh.” “Scanning...” appears on the display and the unit searches for new servers. When the server list has been refreshed, a new server list appears. Tip The unit keeps a history of the last five connected servers and these servers appear under the servers that are currently activated in the server list. 20 servers can be displayed in a server list. When the number of servers on the server list exceeds 20, the unit automatically deletes servers, starting from the oldest server. However, you can select and delete a server manually. To delete a server from the server list You can delete non-operating or unrecognizable servers from the server list. Select the server you want to delete from the server list. Press OPTIONS to enter the options menu and select “Delete.” Select “OK.” Notes • You cannot delete the server of which audio content is • currently being played back by the unit. If you try to delete such a server, a message that requires you to stop playing the track appears on the display. Even if you delete the server from the server list, the server will appear in the list again when the unit finds it on the network (such as when you refresh the server list). 43GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left_L1 010COV.book Page 44 Monday, June 14, 2010 9:12 AM Listening to music services You can listen to music services offered on the Internet with this unit (Music Services function). To use this function, the unit has to be connected to the network and the network has to be connected to the Internet. For details on setting up the network, see “Connecting the unit to your home network (network settings)” (page 25). Refer to the following URL for details and further information on Music Services. http://www.sony.net/audio/musicservices Select the desired folder or station, then press ENTER. • Press M/m to select the item. • Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly. • Press ENTER to go to the next lower directory or to listen to the station. • Press BACK to go to the next higher directory. Music Services Tip The station that was playing when the unit is turned off will start playing again when the unit is turned on again (only if the power cord of the unit was not disconnected from the wall outlet). Notes • If “No Service” appears and you cannot obtain a list of MEMORY • FUNCTION M/m/ENTER service providers, press OPTIONS and select “Refresh Service List.” If the unit is turned off and you disconnect the power cord from the wall outlet, information on the station that was playing when the unit was last turned off will be erased. BACK Other operations To Do the following Change the station or service Press BACK to go back to the list of service providers and select the service again. To go back to the playback display again, press OPTIONS and select “Now Playing.” A list of service providers that the unit can connect to appears. Use various functions while the unit is selecting or playing a station or service Press OPTIONS. The item displayed may vary according to the selected item or directory. Select “vTuner.” View various information while the unit is playing a station or service Press DISPLAY repeatedly to view the artist name, album name, elapsed time, the clock, etc. The following steps introduce how to select “vTuner” as an example of music services offered on the Internet. Press FUNCTION repeatedly to select the Music Services function. 44GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right 010COV.book Page 45 Monday, June 14, 2010 9:12 AM To refresh the service list If the unit cannot find the music services, refresh the service list. Press SETTINGS to enter the settings menu and select “Music Services Settings.” When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER. When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string. Press BACK repeatedly until the list of service providers appears. Select “Preset,” then select the desired preset station. Tip You can use the numeric buttons to select the preset station. Press the numeric button that corresponds to the preset number and press ENTER to select the preset station directly. Note There may be some stations that cannot be preset, depending on the service providers. If you try to preset such a station, “Not Available” appears on the display. Select “Refresh Service List.” To delete the preset station Select “OK.” Select the station you want to delete from the list of preset stations. Press OPTIONS to enter the options menu and select “Delete.” Select “OK.” Enjoying audio content Presetting stations By presetting desired stations, you can easily reselect them by using the corresponding preset number. You can preset up to 20 stations. This operation can only be carried out when the unit is playing a station. Enjoying a variety of music services Play the desired station. Press MEMORY. You can enjoy listening to the content of a wide variety of music services offered on the Internet. Refer to the following URL for information on music services and how to listen to them with this unit. A list of “Preset Memory” appears. Music Services Portal http://www.sony.net/audio/musicservices Press M/m to select a preset number and press ENTER. Repeat steps 1 to 3 to preset other stations. To listen to the preset station Press FUNCTION repeatedly to select the Music Services function. The unit automatically start playing the station that have received the last time. 45GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left 010COV.book Page 46 Monday, June 14, 2010 9:12 AM To check the registration code You may be required to enter the registration code of the unit when you enjoy a new music service. Press SETTINGS to enter the settings menu and select “Music Services Settings.” When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER. When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string. Select “Registration Code.” The registration code of the unit appears on the display. 46GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right_L1 010COV.book Page 47 Monday, June 14, 2010 9:12 AM Listening to audio content from an external component (Audio In) Press VOLUME – to turn the volume down to its lowest level. To adjust the input level If the sound volume is too high or too low, you can change the input level on the unit according to the output level of the connected component. While the AUDIO IN function is selected, press OPTIONS to enter the options menu and select “AUDIO IN Sensitivity.” Select “Low(Line Out)” or “High(Headphone Out).” Display Low(Line Out) Connect an external component to the AUDIO IN jack on the unit using an audio connecting cable. Enjoying audio content You can listen to the playback sound from an external component (such as a portable music player, etc.) connected to the AUDIO IN jack on the unit. Use an audio connecting cable (optional) to connect the AUDIO IN jack on the unit and the audio output jack on the external component. Make sure the audio connecting cable is firmly inserted into both jacks. If not, noise may be generated in the sound output. Description When the unit is connected to the line out jack of the external component. High(Headphone When the unit is Out) connected to the headphone out jack of the external component. : Factory setting) Note AUDIO IN jack Press FUNCTION repeatedly to select the AUDIO IN function. Start playback of the connected component and adjust its volume. When the volume from an external component is too low, set the input level to “High(Headphone Out).” When the volume is too high or the sound is distorted, set the input level to “Low(Line Out).” Use the volume adjustment control if the connected component has a volume adjustment function. Playback sound is output from the speakers of this unit. For details on the operation of the connected component, refer to the operating manual of the connected component. 47GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left_L1 010COV.book Page 48 Monday, June 14, 2010 9:12 AM Listening to the playback sound of the unit with an external component (Audio Out) You can listen to the playback sound of the unit from an external component (such as an amplifier or other stereo system) connected to the AUDIO OUT jacks on the unit. Use an audio connecting cable (with two phone plugs) to connect the AUDIO OUT jacks on the unit and the audio input jack of the external component. Make sure the audio connecting cable is firmly inserted into the appropriate jacks. If not, noise may be generated in the sound output. Select the desired sound source. Turn the volume of the connected device down to its lowest level. Connect the unit and an external component using an audio connecting cable. AUDIO OUT L/R jacks Start playback on the unit, then turn up and adjust the volume of the connected device. The playback sound is output from the connected component. 48GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Right_L1 010COV.book Page 49 Monday, June 14, 2010 9:12 AM Changing the play mode You can listen to tracks in random order (shuffle play) or one track repeatedly (repeat play). play mode can be changed with the iPod & iPhone function and the Home Network function only. Description Normal/(none) The unit plays all tracks for the selected playback range (artist, album, etc.) in sequential order. Repeat/REP The unit plays all tracks for the selected playback range (artist, album, etc.) repeatedly. Repeat 1/REP 1 The unit plays the currently selected track repeatedly. Shuffle*/SHUF The unit plays the tracks for the selected playback range (artist, album, etc.) in random order. Shuffle Repeat/ SHUF REP The unit plays the tracks for the selected playback range (artist, album, etc.) in random order repeatedly. Notes • The play mode that is set on the iPod/iPhone remains • • active after you place the iPod/iPhone on the unit. You can change the play mode with this unit. If you change the play mode on the unit, the play mode set on the unit remains active on the iPod/iPhone even after it is disconnected from the unit. If the album shuffle mode is set on the iPod/iPhone, “SHUF” lights up on the display when you connect the iPod/iPhone to the unit. If the album shuffle repeat mode is set on the iPod/iPhone, “SHUF” and “REP” light up on the display. (Note that this happens only when “Remote UI Mode” is set to “On.”) When the album shuffle mode or album shuffle repeat mode is set on the iPod/iPhone, the unit does not shuffle tracks, but albums. If you want to shuffle tracks, set the play mode of the iPod/iPhone to shuffle or shuffle repeat mode. While the unit is stopped, press PLAY MODE repeatedly. The play mode and the play mode indicators change as follows. Enjoying audio content Play mode/ indicator * Shuffle play is not available for the Home Network function. Press N. Playback starts with the selected play mode. Play mode indicator* * When the iPod & iPhone function is selected, the play mode indicators light up on the display only when “Remote UI Mode” is set to “On.” 49GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fm masterpage: Left_L1 010COV.book Page 50 Monday, June 14, 2010 9:12 AM Searching for an item using a keyword When a list of an item (such as an artist list, a track list, etc.) is displayed, you can enter a keyword to search for the desired item. This function can be used for the iPod & iPhone function*, the Home Network function, and the Music Services function. Input area * The alphabet search function can be used only when the “Remote UI Mode” for the iPod & iPhone function is set to “On.” Numeric/ text buttons ALPHABET SEARCH Current location of the cursor/ number of characters you have entered Type of characters and numbers When you finish entering the keyword, press ENTER. “Searching…” appears on the display. When the unit finishes searching, an item that matches the keyword appears. If the item displayed is not the one you are searching for, press , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/ or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the 86GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Right 010COV.book Page 87 Monday, June 14, 2010 9:12 AM recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”. A “library” means a collection of software functions and/ or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.) ”Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. 87GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Left 010COV.book Page 88 Monday, June 14, 2010 9:12 AM c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 88GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Right 010COV.book Page 89 Monday, June 14, 2010 9:12 AM b) c) d) e) 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit 89GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Left 010COV.book Page 90 Monday, June 14, 2010 9:12 AM geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice That’s all there is to it! 90GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Right 010COV.book Page 91 Monday, June 14, 2010 9:12 AM Notice regarding other third-party software This product contains the following software applications for which Sony has been licensed either directly or indirectly by third parties. 1. OpenSSL (including the library called “Original SSLeay”) 2. libcurl 3. libjpeg 4. libpng 5. ncurses 6. ntp 7. zlib 8. Expat 9. NetBSD By request of the copyright holders of these software applications, Sony provides our customers with the following notice. 1. OpenSSL Copyright (c) 1998 - 2007 The OpenSSL Project.All rights reserved. Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved. This product includes software developed by the OpenSSL. Project for use in the OpenSSL Toolkit (http://www.openssl.org/). OpenSSL License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)” 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OFLIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Original SSLeay License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word “cryptographic” can be left out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 91GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Left 010COV.book Page 92 Monday, June 14, 2010 9:12 AM SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 2. libcurl COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2008, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. 3. libjpeg This software is based in part on the work of the Independent JPEG Group. 4. libpng Copyright (c) 2004, 2006-2009 Glenn Randers-Pehrson Copyright (c) 2000-2002 Glenn Randers-Pehrson Copyright (c) 1998, 1999 Glenn Randers-Pehrson Copyright (c) 1996, 1997 Andreas Dilger Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. 5. ncurses Copyright (c) 1998-2004,2006 Free Software Foundation, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization. 6. ntp Copyright (c) David L. Mills 1992-2009 Permission to use, copy, modify, and distribute this software and its documentation for any purpose with or without fee is hereby granted, provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name University of Delaware not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The University of Delaware makes no representations about the suitability this software for any purpose. It is provided “as is” without express or implied warranty. 7. zlib Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler 8. Expat COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2008, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. 9. NetBSD Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights reserved. 92GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Right 010COV.book Page 93 Monday, June 14, 2010 9:12 AM Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the NetBSD Foundation, Inc. and its contributors. 4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes software developed by Gardner Buchanan. This product includes software developed by Gordon W. Ross This product includes software developed by Manuel Bouyer. This product includes software developed by Mark Brinicombe. This product includes software developed by Rolf Grossmann. This product includes software developed by TooLs GmbH. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by the RiscBSD team. This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory. This product includes software developed for the NetBSD Project by Wasabi Systems, Inc. This product includes software developed for the NetBSD Project by Matthias Drochner. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by Adam Glass. This product includes software developed by Bill Paul. This product includes software developed by Brini. This product includes software developed by Causality Limited. This product includes software developed by Charles M. Hannum. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christos Zoulas. 93GB NAS-SV20i/SV20Di 4-192-583-11(1) C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fm masterpage: Left 010COV.book Page 94 Monday, June 14, 2010 9:12 AM Trademarks, etc. • This software is based in part on the work of the • • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Independent JPEG Group. PARTY STREAMING and the PARTY STREAMING logo are trademarks of Sony Corporation. • VAIO, • • • • • • , and VAIO Media are registered trademarks of Sony Corporation. US and foreign patents licensed from Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Microsoft, Windows, Windows Vista, Windows 7™, Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. “ ” is a mark of the Wi-Fi Alliance. • This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. • DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners. WPA Supplicant Copyright (c) 2003-2006, Jouni Malinen and contributors All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3 Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. • The system names and product names indicated in this • • • • manual are generally the trademarks or registered trademarks of the manufacturer. In this manual, Microsoft Windows XP Home Edition, Microsoft Windows XP Professional and Microsoft Windows XP Media Center Edition are referred to as Windows XP. In this manual, Microsoft Windows Vista Home Basic, Microsoft Windows Vista Home Premium, Microsoft Windows Vista Business and Microsoft Windows Vista Ultimate are referred to as Windows Vista. In this manual, Microsoft Windows 7 Starter, Microsoft Windows 7 Home Premium, Microsoft Windows 7 Professional, Microsoft Windows 7 Ultimate are referred to as Windows 7. ™ and ® marks are omitted in this manual. 94GB NAS-SV20i/SV20Di 4-192-583-11(1)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Author : Sony Corporation Create Date : 2010:06:23 12:41:24+09:00 GTS PDFX Conformance : PDF/X-1a:2001 GTS PDFX Version : PDF/X-1:2001 Modify Date : 2010:06:23 12:46:39+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Trapped : False Producer : Acrobat Distiller 9.3.2 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2010:06:23 12:46:39+09:00 Format : application/pdf Creator : Sony Corporation Title : NAS-SV20i/SV20Di Document ID : uuid:c9ca7209-1a34-445f-a75e-6f761fcc8133 Instance ID : uuid:cfb4e828-90f7-46b0-9d20-f41f23ae7523 Page Count : 94EXIF Metadata provided by EXIF.tools