A and H Design Group BV-005RX Wireless remote control vibrator User Manual

A&H; Design Group, Ltd. Wireless remote control vibrator

User Manual

English . . . . . . . . . . . . . . . 2Deutsch. . . . . . . . . . . . . . . 24Español . . . . . . . . . . . . . . . 46Français . . . . . . . . . . . . . . . 68Nederlands . . . . . . . . . . . . .90Italiano . . . . . . . . . . . . . . . 112Pусский . . . . . . . . . . . . . 134USER GUIDE
2 3OVERVIEWb-VibeTM products are made with silky smooth, body-safe silicone. Our products are phthalate-free and latex-free.The easy to use interface allows users to easily reach their desired stimulation and intensity level. Get ready for sensual satisfaction and exploration that will have you craving for more.b-VibeTM Triplet Anal BeadsENGLISH
4 5EasilyInsertable TipPowerfulMotor 1Powerful Motor 2Base ControlButton Magnetic Charging ContactLED IndicatorTRIPLET ANAL BEADS WIRELESS REMOTE CONTROLDecreaseIntensityPowerButtonVibrationFunction ButtonIncreaseIntensity
7GETTING STARTED1. Before first use, charge your anal beads for approximately 2 hours. The USB charging cable can be plugged into any USB port or USB/AC power adapter (not included)• Flashing Light = Charging• Solid Light = Fully charged• Rapid Flashing Light = Low battery. Charge is needed2. Wash your anal beads with soap and water or toy cleaner suitable for use with silicone items.FAQs can be found atwww.bvibe.comEmail us atcustomerservice@bvibe.com for any unanswered questions3. Lubricate your anal beads with a water based, silicone compatible lubricant.4. Turn ON your anal beads by pressing quickly at the bottom of your anal beads.The light will flash, indicating the power is on and in standby mode.Push again to use the manual mode, or push on the remote to pair the remote & anal beads.Once in use, the base light will change from flashing to solid.TOY CLEANERLUBE
8 95. To change the vibration mode/pattern and intensity via the base control, press the A. There are a total of 15 modes when using manual control. Vibration intensity can only be increased via use of the remote control. 6. To change the vibration intensity and/or the mode/pattern via the remote control, press and release A (Increase Intensity) and A (Decrease Intensity). Press and release A to change the vibration mode/pattern.1. To turn the item ON quickly press A The A will flash to indicate the power is on. Push again to change the vibration pattern. There are a total of 15 modes using the manual control. Vibration intensity can only be increased via use of the remote control. 2. To power OFF your anal beads press and hold A for 2 seconds. LED will turn off to indicate the power is OFF.MANUAL CONTROL12
10 111. First turn your anal beads on in standby mode by quickly pressing on your anal beads.2. While the baselight is flashing, power on your remote to pair the remote & anal beads. 3. Once the item is paired the base light will become solid and you can control your anal beads by remote.4. Press and release to increase vibration intensity.5. Press and release to decrease vibration intensity. There are a total of 6 vibration intensity levels.6. The vibration modes can be changed by pressing and releasing A. There are 15 vibration modes when using the remote control.7. Holding A or for 2 seconds will pause the 2 motors. 8. Fast pressing A for 1 second will turn the 2 motors back on.9. To turn the item ON/OFF press and release A on the remote.10. To completely turn off your anal beads, you must press and hold A on your anal beads.REMOTE CONTROL
12 13CHARGING YOUR ANAL BEADS CHANGING YOUR REMOTE CONTROL BATTERY• Attach the USB charging cord to the designated magnetic charging area on the base of the product.• Flashing light indicates item is charging• Solid light indicates item is fully charged• Rapid flashing indicates charging is required• Anal beads require approximately 2 hours for full charge• Slide open the remote control battery compartment as shown.• Button cell CR 2032 has been preinstalled into the remote control. • Remove the paper slip inside the battery compartment to activate the power in the remote control.• Store the remote control and the battery separately to prolong the battery life. Flashing light = ChargingSolid light = Fully ChargedOPEN
14 15TRAVEL LOCK• All b-Vibe items include travel lock for safe and convenient travelVia the remote:Simultaneously press and hold the and buttons for 3 seconds. Flashing light on the remote will indicate the item is locked.To unlock simply press and hold and again for 3 seconds. Flashing light will indicate lock is disabled.Via the anal beads:Hold A for 5 seconds, flashing light on the base of the anal beads will indicate the item is locked. For unlocking, hold A again for 5 seconds, flashing light will indicate the item is unlocked.12312345VIBRATING MODES• There are 6 vibration intensities. • There are 15 vibration modes, explained below:Vibration Pattern 4Vibration Pattern 51. Low2. Speed II3. Speed III4. Speed IV5. Speed V6. MaximumVibration Intensity Vibration PatternVibration Pattern 3Vibration Pattern 2Vibration Pattern 8Vibration Pattern 6Vibration Pattern 1Vibration Pattern 7
16 171. Always clean your anal beads thoroughly before and after each use.2. We recommend premium water-based lubricant. Silicone-based lubricants are not recommended and can cause damage to the product. 3. To properly clean your anal beads, wash with luke-warm water and a respected antibacterial soap. Rinse clean and pat dry using a lint-free cloth or towel. Do not use cleaners containing alcohol, petrol or acetone.4. Avoid leaving your anal beads in direct sunlight and never expose it to extreme heat. b-Vibe CARECleaning, Storage & SafetyTOY CLEANERLUBEVIBRATING MODESVibration Pattern 151. Low2. Speed II3. Speed III4. Speed IV5. Speed V6. MaximumVibration Intensity Vibration PatternVibration Pattern 13Vibration Pattern 14Vibration Pattern 10Vibration Pattern 9Vibration Pattern 11Vibration Pattern 12
18 195. Our products are designed to be splash-proof. This means that a session in the shower or washing in running water will not cause damage, but prolonged exposure — such as using in the bath — would be harmful. Do not fully submerse your anal beads in water. 6. Never charge your anal beads while they are wet. Ensure that the charging pins on the base of the anal beads are completely dry before connecting to the charging cord. If your anal beads appear to function abnormally, turn OFF and consult our customer care section on bvibe.com, where you will find help tips. Should you require further assistance please contact: customerservice@bvibe.comNever charge your anal beads while they are wet.Materials SizeWeightBattery ChargingUse TimeMax Noise LevelInterfaceBody Safe Silicone/ ABS137 x 63 x 28 mm74 gBattery li-ion 150m-Ah2 hours1 hour< 68 dBSingle Button Manual Control4 Button Remote ControlSPECIFICATIONS
20 21The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment.DISPOSAL INFORMATIONDisposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems):Declaration of ConformityHereby, b-Vibe declares that this Triplet Anal beads product is in compliance wfith essentfiafl requfirements and other reflevant provfisfions of Dfirectfive 2014/53/EU A copy of the Decflaratfion of Conformfity can be found at www bvfibe com 2014/53/EU The Radio Equipment Directive
22 23Complete user instructions in additional languages and FAQ can be found at:www.bvibe.comEmail us atcustomerservice@bvibe.comfor any unanswered questionsDesigned and Developed byb-VibeTMMade in China© 2016 b-VibeTM
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. 24 25We declare on our sole responsibility that his equipment complies with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and that any applicable EssentialTest Suite measurements have been performed.CE versions of the Wireless remote control vibratorDeclaration of Conformity(Model: BV-005 BLK, BV-005 FUC, BV-006 BLK, BV-006 PUR) which display the CE symbol on the product label, comply withthe essential requirements of the Radio Equipment Directive 2014/53/EU.

Navigation menu