A and H Design Group BV-005RX Wireless remote control vibrator User Manual

A&H; Design Group, Ltd. Wireless remote control vibrator

User Manual

English . . . . . . . . . . . . . . . 2
Deutsch. . . . . . . . . . . . . . . 24
Español . . . . . . . . . . . . . . . 46
Français . . . . . . . . . . . . . . . 68
Nederlands . . . . . . . . . . . . .90
Italiano . . . . . . . . . . . . . . . 112
Pусский . . . . . . . . . . . . . 134
USER GUIDE
2 3
OVERVIEW
b-VibeTM products are made with silky smooth, body-
safe silicone. Our products are phthalate-free and
latex-free.
The easy to use interface allows users to easily reach
their desired stimulation and intensity level. Get ready
for sensual satisfaction and exploration that will have
you craving for more.
b-VibeTM Triplet Anal Beads
ENGLISH
4 5
Easily
Insertable Tip
Powerful
Motor 1
Powerful
Motor 2
Base
Control
Button Magnetic
Charging
Contact
LED
Indicator
TRIPLET ANAL BEADS WIRELESS REMOTE CONTROL
Decrease
Intensity
Power
Button
Vibration
Function
Button
Increase
Intensity
7
GETTING STARTED
1. Before first use, charge your
anal beads for approximately 2
hours. The USB charging cable
can be plugged into any USB port
or USB/AC power adapter (not
included)
• Flashing Light = Charging
• Solid Light = Fully charged
• Rapid Flashing Light = Low
battery. Charge is needed
2. Wash your anal beads with
soap and water or toy cleaner
suitable for use with silicone
items.
FAQs can be found at
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
3. Lubricate your anal beads
with a water based, silicone
compatible lubricant.
4. Turn ON your anal beads by
pressing quickly at the
bottom of your anal beads.
The light will flash, indicating
the power is on and in standby
mode.
Push again to use the
manual mode, or push
on the remote to pair
the remote & anal beads.
Once in use, the base light will
change from flashing to solid.
TOY CLEANER
LUBE
8 9
5. To change the vibration mode/
pattern and intensity via the base
control, press the A. There are a
total of 15 modes when using
manual control. Vibration intensity
can only be increased via use of
the remote control.
6. To change the vibration intensity
and/or the mode/pattern via the
remote control, press and release A
(Increase Intensity) and A (Decrease
Intensity). Press and release A to
change the vibration mode/pattern.
1. To turn the item ON quickly press A
The A will flash to indicate the power
is on. Push again to change the vibration
pattern. There are a total of 15 modes
using the manual control. Vibration
intensity can only be increased via use of
the remote control.
2. To power OFF your anal beads press
and hold A for 2 seconds. LED will turn
off to indicate the power is OFF.
MANUAL CONTROL
1
2
10 11
1. First turn your anal beads on in standby
mode by quickly pressing on your
anal beads.
2. While the baselight is flashing, power
on your remote to pair the remote & anal
beads.
3. Once the item is paired the base light
will become solid and you can control
your anal beads by remote.
4. Press and release to increase
vibration intensity.
5. Press and release to decrease
vibration intensity. There are a total of 6
vibration intensity levels.
6. The vibration modes can be changed
by pressing and releasing A. There
are 15 vibration modes when using the
remote control.
7. Holding A or for 2 seconds will
pause the 2 motors.
8. Fast pressing A for 1 second will turn
the 2 motors back on.
9. To turn the item ON/OFF press and
release A on the remote.
10. To completely turn off your anal
beads, you must press and hold A on
your anal beads.
REMOTE CONTROL
12 13
CHARGING YOUR ANAL BEADS CHANGING YOUR REMOTE CONTROL BATTERY
• Attach the USB charging cord
to the designated magnetic
charging area on the base of
the product.
• Flashing light indicates item
is charging
• Solid light indicates item is
fully charged
• Rapid flashing indicates
charging is required
• Anal beads require
approximately 2 hours for
full charge
• Slide open the remote
control battery compartment
as shown.
• Button cell CR 2032 has been
preinstalled into the remote
control.
• Remove the paper slip inside
the battery compartment
to activate the power in the
remote control.
• Store the remote control
and the battery separately to
prolong the battery life.
Flashing light = Charging
Solid light = Fully Charged
OPEN
14 15
TRAVEL LOCK
• All b-Vibe items include travel lock for
safe and convenient travel
Via the remote:
Simultaneously press and hold the
and buttons for 3 seconds.
Flashing light on the remote will
indicate the item is locked.
To unlock simply press and hold and
again for 3 seconds. Flashing light will
indicate lock is disabled.
Via the anal beads:
Hold A for 5 seconds, flashing light on
the base of the anal beads will indicate
the item is locked. For unlocking, hold
A again for 5 seconds, flashing light
will indicate the item is unlocked.
12
3
123
45
VIBRATING MODES
• There are 6 vibration intensities.
• There are 15 vibration modes, explained below:
Vibration Pattern 4
Vibration Pattern 5
1. Low
2. Speed II
3. Speed III
4. Speed IV
5. Speed V
6. Maximum
Vibration Intensity Vibration Pattern
Vibration Pattern 3
Vibration Pattern 2
Vibration Pattern 8
Vibration Pattern 6
Vibration Pattern 1
Vibration Pattern 7
16 17
1. Always clean your anal beads
thoroughly before and after each use.
2. We recommend premium water-
based lubricant. Silicone-based
lubricants are not recommended and
can cause damage to the product.
3. To properly clean your anal beads,
wash with luke-warm water and a
respected antibacterial soap. Rinse
clean and pat dry using a lint-free
cloth or towel. Do not use cleaners
containing alcohol, petrol or acetone.
4. Avoid leaving your anal beads in
direct sunlight and never expose it to
extreme heat.
b-Vibe CARE
Cleaning, Storage & Safety
TOY CLEANER
LUBE
VIBRATING MODES
Vibration Pattern 15
1. Low
2. Speed II
3. Speed III
4. Speed IV
5. Speed V
6. Maximum
Vibration Intensity Vibration Pattern
Vibration Pattern 13
Vibration Pattern 14
Vibration Pattern 10
Vibration Pattern 9
Vibration Pattern 11
Vibration Pattern 12
18 19
5. Our products are designed to
be splash-proof. This means that
a session in the shower or washing
in running water will not cause
damage, but prolonged exposure —
such as using in the bath — would
be harmful. Do not fully submerse
your anal beads in water.
6. Never charge your anal beads
while they are wet. Ensure that
the charging pins on the base of
the anal beads are completely dry
before connecting to the charging
cord.
If your anal beads appear to
function abnormally, turn OFF and
consult our customer care section
on bvibe.com, where you will
find help tips. Should you require
further assistance please contact:
customerservice@bvibe.com
Never charge your
anal beads while
they are wet.
Materials
Size
Weight
Battery
Charging
Use Time
Max Noise Level
Interface
Body Safe
Silicone/ ABS
137 x 63 x 28 mm
74 g
Battery li-ion
150m-Ah
2 hours
1 hour
< 68 dB
Single Button
Manual Control
4 Button Remote
Control
SPECIFICATIONS
20 21
The crossed-out dustbin symbol indicates that these items should not be
treated as household waste, but rather brought to the appropriate collection
point for recycling electrical and electronic equipment.
DISPOSAL INFORMATION
Disposal of old electronic equipment (applicable in the EU and other
European countries with separate waste collection systems):
Declaration of Conformity
Hereby, b-Vibe declares that this Triplet Anal beads product is in compliance
wfith essentfiafl requfirements and other reflevant provfisfions of Dfirectfive 2014/53/
EU A copy of the Decflaratfion of Conformfity can be found at www bvfibe com
2014/53/EU The Radio Equipment Directive
22 23
Complete user instructions in additional
languages and FAQ can be found at:
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
Designed and Developed by
b-VibeTM
Made in China
© 2016 b-VibeTM
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
24 25
We declare on our sole responsibility that his equipment complies with the essential
requirements of the Radio Equipment Directive, 2014/53/EU, and that any applicable Essential
Test Suite measurements have been performed.
CE versions of the Wireless remote control vibrator
Declaration of Conformity
(Model: BV-005 BLK, BV-005 FUC,
BV-006 BLK, BV-006 PUR) which display the CE symbol on the product label, comply with
the essential requirements of the Radio Equipment Directive 2014/53/EU.

Navigation menu