A and H Design Group BV-005RX Wireless remote control vibrator User Manual
A&H; Design Group, Ltd. Wireless remote control vibrator
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3205733 |
| Application ID | DlvEjK7WDLve6q/QDtlIyw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 177.13kB (2214068 bits) |
| Date Submitted | 2016-11-24 00:00:00 |
| Date Available | 2016-11-24 00:00:00 |
| Creation Date | 2016-10-31 09:50:44 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-11-18 09:58:53 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
USER GUIDE English . . . . . . . . . . . . . . . . 2 Deutsch. . . . . . . . . . . . . . . 24 Español. . . . . . . . . . . . . . . 46 Français. . . . . . . . . . . . . . . 68 Nederlands . . . . . . . . . . . . . 90 Italiano . . . . . . . . . . . . . . . 112 Pусский . . . . . . . . . . . . . 134 ENGLISH OVERVIEW b-VibeTM products are made with silky smooth, bodysafe silicone. Our products are phthalate-free and latex-free. The easy to use interface allows users to easily reach their desired stimulation and intensity level. Get ready for sensual satisfaction and exploration that will have you craving for more. b-VibeTM Triplet Anal Beads TRIPLET ANAL BEADS Easily Insertable Tip Powerful Motor 1 WIRELESS REMOTE CONTROL Base Control Button Magnetic Charging Contact Vibration Function Button Power Button Decrease Intensity Powerful Motor 2 Increase Intensity LED Indicator GETTING STARTED 1. Before first use, charge your anal beads for approximately 2 hours. The USB charging cable can be plugged into any USB port or USB/AC power adapter (not included) 3. Lubricate your anal beads with a water based, silicone compatible lubricant. 4. Turn ON your anal beads by pressing quickly at the bottom of your anal beads. • Flashing Light = Charging The light will flash, indicating the power is on and in standby mode. • Solid Light = Fully charged • Rapid Flashing Light = Low battery. Charge is needed TOY CL EA NER 2. Wash your anal beads with soap and water or toy cleaner suitable for use with silicone items. FAQs can be found at www.bvibe.com LUBE Push again to use the manual mode, or push on the remote to pair the remote & anal beads. Once in use, the base light will change from flashing to solid. Email us at customerservice@bvibe.com for any unanswered questions MANUAL CONTROL 5. To change the vibration mode/ pattern and intensity via the base control, press the A. There are a total of 15 modes when using manual control. Vibration intensity can only be increased via use of the remote control. 1. To turn the item ON quickly press A The will flash to indicate the power is on. Push again to change the vibration pattern. There are a total of 15 modes using the manual control. Vibration intensity can only be increased via use of the remote control. 6. To change the vibration intensity and/or the mode/pattern via the remote control, press and release A (Increase Intensity) and A (Decrease Intensity). Press and release to change the vibration mode/pattern. 2. To power OFF your anal beads press and hold A for 2 seconds. LED will turn off to indicate the power is OFF. REMOTE CONTROL 1. First turn your anal beads on in standby mode by quickly pressing on your anal beads. 2. While the baselight is flashing, power on your remote to pair the remote & anal beads. 3. Once the item is paired the base light will become solid and you can control your anal beads by remote. 4. Press and release vibration intensity. to increase 5. Press and release to decrease vibration intensity. There are a total of 6 vibration intensity levels. 10 6. The vibration modes can be changed by pressing and releasing . There are 15 vibration modes when using the remote control. 7. Holding or for 2 seconds will pause the 2 motors. 8. Fast pressing for 1 second will turn the 2 motors back on. 9. To turn the item ON/OFF press and release on the remote. 10. To completely turn off your anal beads, you must press and hold A on your anal beads. 11 CHARGING YOUR ANAL BEADS CHANGING YOUR REMOTE CONTROL BATTERY • Attach the USB charging cord to the designated magnetic charging area on the base of the product. • Slide open the remote control battery compartment as shown. • Flashing light indicates item is charging • Button cell CR 2032 has been preinstalled into the remote control. • Solid light indicates item is fully charged • Rapid flashing indicates charging is required Flashing light = Charging • Remove the paper slip inside the battery compartment to activate the power in the remote control. • Store the remote control and the battery separately to prolong the battery life. • Anal beads require approximately 2 hours for full charge OPEN Solid light = Fully Charged 12 13 TRAVEL LOCK • All b-Vibe items include travel lock for safe and convenient travel VIBRATING MODES 23 • There are 6 vibration intensities. • There are 15 vibration modes, explained below: Via the remote: Simultaneously press and hold the and buttons for 3 seconds. Flashing light on the remote will indicate the item is locked. To unlock simply press and hold and again for 3 seconds. Flashing light will indicate lock is disabled. Via the anal beads: Hold A for 5 seconds, flashing light on the base of the anal beads will indicate the item is locked. For unlocking, hold A again for 5 seconds, flashing light will indicate the item is unlocked. 23 45 Vibration Intensity Vibration Pattern 1. Low Vibration Pattern 1 2. Speed II Vibration Pattern 2 3. Speed III Vibration Pattern 3 4. Speed IV Vibration Pattern 4 5. Speed V Vibration Pattern 5 6. Maximum Vibration Pattern 6 Vibration Pattern 7 Vibration Pattern 8 14 15 VIBRATING MODES b-Vibe CARE Vibration Intensity Vibration Pattern Cleaning, Storage & Safety 1. Low Vibration Pattern 9 1. Always clean your anal beads thoroughly before and after each use. 2. Speed II Vibration Pattern 10 3. Speed III Vibration Pattern 11 4. Speed IV Vibration Pattern 12 5. Speed V Vibration Pattern 13 6. Maximum Vibration Pattern 14 TOY CL EA NER Vibration Pattern 15 2. We recommend premium waterbased lubricant. Silicone-based lubricants are not recommended and can cause damage to the product. LUBE 3. To properly clean your anal beads, wash with luke-warm water and a respected antibacterial soap. Rinse clean and pat dry using a lint-free cloth or towel. Do not use cleaners containing alcohol, petrol or acetone. 4. Avoid leaving your anal beads in direct sunlight and never expose it to extreme heat. 16 17 SPECIFICATIONS 5. Our products are designed to be splash-proof. This means that a session in the shower or washing in running water will not cause damage, but prolonged exposure — such as using in the bath — would be harmful. Do not fully submerse your anal beads in water. 6. Never charge your anal beads while they are wet. Ensure that the charging pins on the base of the anal beads are completely dry before connecting to the charging cord. If your anal beads appear to function abnormally, turn OFF and consult our customer care section on bvibe.com, where you will find help tips. Should you require further assistance please contact: customerservice@bvibe.com 18 Materials Body Safe Silicone/ ABS Use Time 1 hour Size 137 x 63 x 28 mm Max Noise Level < 68 dB Interface Weight 74 g Single Button Manual Control Battery Battery li-ion 150m-Ah 4 Button Remote Control Charging 2 hours Never charge your anal beads while they are wet. 19 DISPOSAL INFORMATION 2014/53/EU The Radio Equipment Directive Declaration of Conformity Disposal of old electronic equipment (applicable in the EU and other Hereby, b-Vibe declares that this Triplet Anal beads product is in compliance European countries with separate waste collection systems): wfith essentfiafl requfirements and other reflevant provfisfions of Dfirectfive 2014/53/ EU A copy of the Decflaratfion of Conformfity can be found at www bvfibe com The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment 20 21 Complete user instructions in additional languages and FAQ can be found at: www.bvibe.com Email us at customerservice@bvibe.com for any unanswered questions 22 Designed and Developed by b-VibeTM Made in China © 2016 b-VibeTM 23 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. Declaration of Conformity We declare on our sole responsibility that his equipment complies with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and that any applicable Essential Test Suite measurements have been performed. CE versions of the Wireless remote control vibrator (Model: BV-005 BLK, BV-005 FUC, If this equipment does cause harmful interference to radio or television reception, BV-006 BLK, BV-006 PUR) which display the CE symbol on the product label, comply with which can be determined by turning the equipment off and on, the user is encouraged the essential requirements of the Radio Equipment Directive 2014/53/EU. to try to correct the interference by one or more of the following measures: 24 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2016:10:31 09:50:44+08:00 Metadata Date : 2016:11:18 09:58:53+08:00 Modify Date : 2016:11:18 09:58:53+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:aa50f370-8248-43ea-b9a5-0953ef3e1471 Original Document ID : xmp.did:F77F117407206811AB08C103085F6733 Document ID : xmp.id:375ecd22-d60e-44bd-b375-449f4a409020 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:6078ad46-880b-4eb0-ae2c-e3e3f779fd7b Derived From Document ID : xmp.did:54e291ef-8aba-4ba6-8304-65b4a7ca2596 Derived From Original Document ID: xmp.did:F77F117407206811AB08C103085F6733 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:10:31 09:50:45+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 13 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools