ACSS an L 3 Communications and Thales 4061400 Mode S Transponder User Manual 00201001 tif

ACSS an L-3 Communications and Thales Company Mode S Transponder 00201001 tif

Test Instructions

ENGINEERING SPECIFICATION SECURITY NOTATION SPEC NO. IT4061400-907 CAGE CODE 58960 H REV LTR THIS TITLE PAGE CONTAINS PROPRIETARY AND DATA RIGHTS NOTATIONS. DOCUMENT TYPE DIVISION AES - DV INTEGRATED TEST DEPARTMENT NO. 5237 PRODUCTLINENO. 3834 CLASS INITIAL RELEASE DATE A 8 JUL 93 CONTRACT NO. TITLE INTEGRATED TEST SPECIFICATION FOR MODE S TRANSPONDER, PART NO. 4061400-9XX PREPARED BY: DATE B. Gardner 93-07-02 APPROVED FOR SCM DATE REF AWAEB/PSAEB NO. CHECKER 4055000 R. Scott Jones 93-07-08 APPROVED BY TECHNICAL DATE MANAGER J. Finnegan 93-07-02 APPROVED FOR SQA DATE APPROVED BY ENGINEERING DEPARTMENT MANAGER DATE PRODUCT DESIGN CHECKER (FOR REF, SPCL CONT PER EPM 1-A-40) APPROVED BY: DATE COGNIZANCE OF QE SUPVR (FOR REF, SPCL CONT PER EPM t-A40) FOR PAGE INDEX, SEE PAGE CR-2. REVISION RECORD FOLLOWS PAGE INDEX. PROPRIETARY NOTICE THIS DOCUMENT AND THEINFORMATION DISCLOSED HEREIN ARE PROPRIETARY DATA OF HONEYWELLINTERNATIONALINC. NEITHERTHISDOCUMENTNORTHEINFORMATION CONTAINED HEREIN SHALLBE REPRODUCED, USED, OR DISCLOSEDTO OTHERS WITHOUT THE WRITTENAUTHORIZATION OFHONEYWELLINTERNATIONALINC. NOTICE FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE OF CONFIDENCE INFORMATION GENERALLY (18 USC 1905) THIS DOCUMENT IS BEING FURNISHED IN CONFIDENCE BY HONEYWELL INTERNATIONAL INC. THE INFORMATION DISCLOSED HEREIN FALLS WITHIN EXEMPTION (b) (4) OF 5 USC 552 AND THE PROHIBITIONS OF 18 USC 1905. Copyright 2001 Honeywell International Inc. All Rights Reserved AW/CRITICAL NOTATION Honeywell z,t, SECURITY NOTATION 15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC. CR-1 PAGE
ENGINEERING SPECIFICATION SECURITY NOTATION SPEC NO. IT4061400-907 H CAGE CODE 58960 REVLTR SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS. THE LATEST REVISION OF EACH SHEET IS INDICATED ON THE PAGE INDEX. Rev Page Ltr Title CR-1 H Page Index CR-2 H Revision Record CR-3 H Table of Contents i G ii G 1 G 2 G 3 G 4 G 5 G 6 G 7 G 8 G 9 G 10 G 11 G 12 G 13 G 14 G 15 G 16 G 17 G 18 G 19 G 20 G 21 G 22 G 23 G 24 G 25 G 26 G 27 G 28 G Rev Rev Rev Rev Page Ltr Page Ltr Page Ltr Page Ltr 29 G 70 G A-14 G 30 G 71 G A-15 G 31 G 72 G A-16 G 32 G 73 G A-17 G 33 G 74 G A-18 G 34 G 75 G A-19 G 35 G 76 G A-20 G 36 G 77 G A-21 G 37 G 78 G A-22 G 38 G 79 G A-23 G 39 G 80 G A-24 G 40 G 81 G A-25 G 41 G 82 G A-26 G 42 G 83 G A-27 G 43 G 84 G A-28 G 44 G 85 G A-29 G 45 G 86 G A-30 G 46 G 87 G A-31 G 47 G 88 G A-32 G 48 G 89 G A-33 G 49 G 90 G A-34 G 50 G 91 G A-35 G 51 G 92 G A-36 G 52 G 93 G A-37 G 53 G 94 G A-38 G 54 G 95 G A-39 G 55 G Appendix A A-40 G 56 G A-0 G A-41 G 57 G A-1 G A-42 H 58 G A-2 G A-43 G 59 G A-3 G TOTAL 60 G A-4 G PAGES: 144 61 G A-5 H 62 G A-6 H 63 G A-7 G 64 G A-8 G 65 G A-9 G 66 G A-10 G 67 G A-11 G 68 G A-12 G 69 G A-13 G Hone well AW/CRITICAL NOTATION SECURITY NOTATION PAGE INDEX CR-2 PAGE 15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/1812000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING SPECIFICATION SECURITY NOTATION SPEC NO. IT4061400-907 CAGE CODE 58960 SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS. H REV LTR REV LTR PAGE DESCRIPTION DATE AND APPROVAL G SEE PAGE INDEX SHEET CR-2 H SEE PAGE INDEX SHEET CR-2 SEE REV F FOR PREVIOUS REVISION INFORMATION. DOCUMENT CONVERTED TO LATEST FORMAT. CO 21761 (NA) C.O. 25583 (NA) D. Zinda 5 MAR 01 o2. -01 - IS" AW/CRITICAL NOTATION Hone vell . v,s,o.. co.Ds SECURITY NOTATION 15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC. CR-3 PAGE
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONTABLE OF CONTENTS iSECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable of ContentsTitle Page1. SCOPE ...................................................................................................................12. REFERENCE DOCUMENTS....................................................................................13. GENERAL INFORMATION......................................................................................14. POWER REQUIREMENTS ....................................................................................185. TEST EQUIPMENT................................................................................................185.1 HONEYWELL TEST EQUIPMENT................................................................................185.2 COMMERCIAL TEST EQUIPMENT ..............................................................................186. TEST SETUP ........................................................................................................197. TEST REQUIREMENTS ........................................................................................198. TEST PROCEDURE ..............................................................................................23APPENDIX A ALTERNATIVE TEST PROCEDURE FOR PC EMULATION SYSTEM........... A-0
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRTABLE OF CONTENTS (cont)Title PageAW/CRITICAL NOTATIONTABLE OF CONTENTS iiSECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONList of FiguresFigure 1. Initial Test Equipment Setup..............................................................................................................20Figure 2. Timing Diagrams ...............................................................................................................................21List of TablesTable 1. Initial IFR ATC-1400A Control Settings ................................................................................................6Initial IFR S-1403 Control Settings ......................................................................................................................6Table 2. Initial Mode S Transponder (UUT) Configuration .................................................................................7Table 3. Complemented Mode S Transponder (UUT) Configuration ...............................................................10Table 4. Initial Setup For Internal RF Self-Test ................................................................................................13Table 5. Initial Settings For Mode S And Atcrbs (Mode S Sw Running) ..........................................................14Table 6. Initial 429 Setup (Internal Wrap).........................................................................................................16Table 6.1. Walking 1s 429 Setup (Internal Wrap).............................................................................................16Table 7. Initial 429 Setup (External Wrap)........................................................................................................16Table 8. Initial 429 I/O Interconnects (Mode S Interface Panel).......................................................................17
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 1SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTITLE: INTEGRATED TEST SPECIFICATION FOR MODE S TRANSPONDER, PART NO.4061400-9XX1. SCOPEThis Integrated Test Specification (IT) establishes the manufacturing and operational requirementsthat the Mode S Transponder, Part No. 4061400-9XX, must meet to ensure that the unit is inproper operating condition.2. REFERENCE DOCUMENTSThese reference documents are not required for performance of the test procedure. The purposeof listing these documents is to provide an aid for troubleshooting should any discrepancies occurduring the performance of the test procedure.4061400-9XX End Item Drawing - Mode S Transponder4061401 Outline and Installation Drawing64980-90912 HP 64000 System Overview Reference64980-90928 HP 64000 System Software Reference1002-6801-000 IFR 1403 Operation/Maintenance ManualC35-3641-05 System Control Panel User's Manual3. GENERAL INFORMATION3.1 All tests shall be performed under the following conditions:Temperature = 25 ± 5 CRelative humidity = 95% maximumPressure = between 20 and 32 inHg3.2 Tests 1 thru 10 shall be performed with the HP 64000/UDE or PC/CPI emulation system attached tothe top connector of the unit under test (UUT) A1 CCA (refer to figure 1). All subsequent tests shallbe performed in a stand-alone configuration with the emulation system removed or deactivated.Power to the UUT shall be removed before attaching or removing any interconnecting systems.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 2SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.3 Notes on operating the HP 64000 emulation system are as follows:3.3.1 All tests requiring the HP 64000 emulation system shall be performed while executing theSDP-185 monitor software. In the engineering environment, the monitor is invoked by executingthe 'HW' command file from within the MODESP user ID of the HP 64000 system.3.3.2 All address and data information should be entered in Hex with a leading 0 and trailing H (the Hindicates the data is in hexadecimal). See example in 3.3.3.3.3.3 Most emulation commands are invoked by pressing HP 64000 softkeys, found directly below theCRT. Only hexadecimal addresses and data are typed using the standard typewriter keypad ofthe HP 64000. For example, to change the contents of location C000 (Hex) to the value AAAA(Hex), the following HP 64000 command would be entered:modify memory 0C000H to 0AAAAHIn this example, the words (modify, memory, and to) are entered with single-keystrokesoftkeys.3.4 Notes on operation of the PC emulation system are as follows:3.4.1 All tests requiring the PC emulation system shall be performed while executing the SDP-185monitor software. In the engineering environment, the monitor is invoked by executing the 'SCPMDS' command file.3.4.2 All address and data information should be entered in Hex with a leading 0/ # for CACHE locationsand a leading 1# for local memory. See example in 3.4.3.3.4.3 Most emulation commands are invoked by pressing the softkeys. Only addresses, data, and'MDS' are typed using the standard typewriter keys. For example, to change the contents oflocation C000 (Hex) to the value AAAA (Hex), the following PC command would be entered:modify memory MDS word 0/#C0/0/0/ to AAAAIn this example, the words (modify, memory, word, and to) are entered with single-keystrokesoftkeys.3.5 When testing diversity, the two antenna signals are referred to as ANT A and ANT B. Thisconversion is consistent with that used by the IFR transponder test equipment and does not need tobe correlated to the actual top and bottom antenna signals. In other words, the TOP ANT cable canbe connected to either ANT A port or ANT B port of the IFR equipment.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 3SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.6 Standard rate and power for ATCRBS and Mode S interrogations are defined as follows:ATCRBS: 450 Hz, -50 dBmMode S: 45 Hz, -50 dBm3.7 Input discrete signal standards are as follows:GND - <3.5 V at 100 mAOPEN - >100k ohms+5V - 5 ± 1 V dc at 20 mA+28V - >18 V dc3.8 Output discrete signal standards are as follows:GND - <3.5 V dcOPEN - >100k ohms+28V - >18 V dc3.9 Notes on entering data into the IFR S-1403 are listed below:3.9.1 Data is entered by use of the cursor keys, slew knob, and numeric keypad. Use the cursor keys tomove between input fields (the cursor will not move to an output/display field). Once in thedesired field, use the slew knob and/or numeric keypad to alter the data.3.9.2 Some fields require the data to toggle through one or more states (for example, the SPR: ON/OFFfield). Use the ON/CAL button to toggle such fields.3.9.3 Some input fields can be moved through a range of numeric values (for example, the Dv=CALfield). These fields must first be toggled out of the CAL state and into the data entry mode. Theslew knob and numeric keypad can then be used to provide the desired value.3.9.4 Some fields require the ENTER key to be pressed after the required data has been selected (forexample, the UF= field).3.10 Notes and a list of HP 64000 command files (Honeywell Part No. MT4061400-902) are as follows:3.10.1 The total execution time of this Integrated Test Procedure may be greatly reduced by using the HP64000 command files listed in paragraph 3.10.3. These command files automatically executemany keystrokes found in certain tests and match statement-for-statement (excluding 'wait'statements) the steps found in the IT work steps.3.10.2 After executing the 'HW' batch file (see paragraph 3.3), execute the command file by typing thefilename (using all caps) into the HP 64000 and pressing RETURN. Most command files pause toallow the operator to record data. Press any key to resume command file execution.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 4SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.10.3 IT Test No. HP 64000 Command Filename1IT102IT203 IT30 (See note 1.)4IT405IT506IT607 IT70 (Shall be executed twice to complete test 7.)8IT809IT8110 IT9011 IT100 (See note 2.)NOTE 1: Before running IT30, test 3 must be performed. IT30 must also be performed atthe completion of the IT to clear E2.NOTE 2: Before running IT100, end out of emulation mode by entering "END" into the HP64000.3.11 Notes and a list of PC command files (Honeywell Part No. MT4061400-101, Revision A) are asfollows:3.11.1 The total execution time of this Integrated Test Procedure may be greatly reduced by using the PCcommand files listed in paragraph 3.11.3. These command files automatically execute manykeystrokes found in certain tests and match statement-for-statement (excluding 'pause'statements) the steps found in the IT work steps.3.11.2 After executing the 'SCP MDS' batch file (see paragraph 3.4), execute the command file by typingthe filename (using all caps) into the PC and pressing ENTER. Most command files pause toallow the operator to record data. Press any key to resume command file execution.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 5SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.11.3 IT Test No. PC Command Filename1IT102IT203 IT30 (See note 1.)4IT405IT506IT607 IT70 (Shall be executed twice to complete test 7.)8IT808.1 IT819IT9010 IT100 (See note 2.)NOTE 1: Before running IT30, test A3 must be performed. IT30 must also be performed atthe completion of the IT to clear E2.NOTE 2: Before running IT100, end out of emulation mode by entering "END" into the PC.(Resume testing at test 10.13.)3.12 This IT conforms to Specification ATLAS ATP SA4061400-905, Revision A or later.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 6SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 1. Initial IFR ATC-1400A Control SettingsSwitch Initial SettingRF LEVEL control -70 dBmCW/NORM/OFF switch OFFSUPPRESSOR ON/OFF switch OFFSLS/ECHO ON/OFF switch OFFXPDR PULSE WIDTH VAR/CAL switch CALFREQ STEP RATE control OFFMAN/AUTO/MAN STEP switch MANXPDR DEV P3/CAL switch CAL1.0µs/1.45µs switch 1.45 µsXPDR DEV P2/CAL switch CALTO/TAC/TD switch TDPRF/SQTR ON/OFF switch ONF2/P2 F1/P1 switch F2/P2XPDR MODE control ADISPLAY SELECT control FREQ MHzPRF/SQTR thumbwheels 45 HzDBL INTERR/INTERF PULSE thumbwheels 047.9 µs OFFXPDR P2/P3 DEV thumbwheels 0.20 µsFREQ/FUNCTION SELECT thumbwheels 1030 MHz XPDRDELTA F thumbwheels 0.00 MHz OFFXPDR PULSE WIDTH thumbwheels 0.00 µsSLS/ECHO thumbwheels +0 dBDECODER (at rear of unit) NARROWNOTE: If unit is cold, provide a 5-minute warmup period. Adjust the FREQ and DELTA F thumbwheelsuntil the FREQ DISPLAY indicates 1030.00 MHz.Initial IFR S-1403 Control SettingsMenu Sub-Menu/Field Initial SettingsSequence S01 UF = 5ADD = 25252525S02 thru S16: OFFControl Menu 1 Func: 1 ATC (ATCRBS)RF Lvl: +0.0
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 7SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 2. Initial Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal NameSwitchPositionSignalSenseUUTRear ConnectorPin No.MODE S ADDRESSA1 0 OPEN J1B-1AA2 1 GND J1B-1BA3 0 OPEN J1B-1CA4 1 GND J1B-1DA5 0 OPEN J1B-1EA6 1 GND J1B-1FA7 0 OPEN J1B-1GA8 1 GND J1B-1HA9 0 OPEN J1B-1JA10 1 GND J1B-1KA11 0 OPEN J1B-2AA12 1 GND J1B-2BA13 0 OPEN J1B-2CA14 1 GND J1B-2DA15 0 OPEN J1B-2EA16 1 GND J1B-2FA17 0 OPEN J1B-2GA18 1 GND J1B-2HA19 0 OPEN J1B-2JA20 1 GND J1B-2KA21 0 OPEN J1B-3AA22 1 GND J1B-3BA23 0 OPEN J1B-3CA24 1 GND J1B-3D
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 8SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 2(Cont). Initial Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal NameSwitchPositionSignalSenseUUTRear ConnectorPin No.ANT PGM 2 OPEN J1A-6KANT CABLE DLY T/B BOT GND J1A-3CB 1 OPEN J1A-3DA0GND J1A-3EGILHAM ALT 1 A1 1 GND J1B-4AA2 0 OPEN J1B-4BA4 1 GND J1B-4CB1 0 OPEN J1B-4DB2 1 GND J1B-4EB4 0 OPEN J1B-4FC1 1 GND J1B-4GC2 0 OPEN J1B-4HC4 1 GND J1B-4JD2 0 OPEN J1B-4KD1 1 GND J1B-5KGILHAM ALT 2 A1 0 OPEN J1A-1AA2 1 GND J1A-1BA4 0 OPEN J1A-1CB1 1 GND J1A-1DB2 0 OPEN J1A-1EB4 1 GND J1A-1FC1 0 OPEN J1A-1GC2 1 GND J1A-1HC4 0 OPEN J1A-1JD2 1 GND J1A-1KD4 0 OPEN J1A-2KANT BITE ON GND J1B-5J
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 9SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 2(Cont). Initial Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal NameSwitchPositionSignalSenseUUTRear ConnectorPin No.FUNC TEST ON GND J1B-3HSTBY/ON ON OPEN J1A-7GSYNC ALT FLAG No. 1 INV OPEN J1A-4JSYNC ALT FLAG No. 2 VLD +18 V J1B-7JALT COMP ON GND J1B-5GALT SRC 1 OPEN J1B-6EALT TYP SEL B 1 OPEN J1B-6FA0GND J1B-6GMAX AIRSPEED 15 1 OPEN J1A-5A16 0 GND J1A-5B17 1 OPEN J1A-5CSDI B 1 OPEN J1A-3GA0GND J1A-3HDATA LINK DLP GND J1B-5HCNTL PNL B OPEN J1A-7DAIR/GND No. 1 AIR OPEN J1A-5KAIR/GND No. 2 AIR OPEN J1A-5J
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 10SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 3. Complemented Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal Name Switch Position Signal SenseMODE S ADDRESS A1 1 GNDA2 0 OPENA3 1 GNDA4 0 OPENA5 1 GNDA6 0 OPENA7 1 GNDA8 0 OPENA9 1 GNDA10 0 OPENA11 1 GNDA12 0 OPENA13 1 GNDA14 0 OPENA15 1 GNDA16 0 OPENA17 1 GNDA18 0 OPENA19 1 GNDA20 0 OPENA21 1 GNDA22 0 OPENA23 1 GNDA24 0 OPEN
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 11SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 3(Cont). Complemented Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal Name Switch Position Signal SenseANT PGM 1 GNDANT CABLE DLY T/B TOP OPENB0 GNDA 1 OPENGILHAM ALT 1 A1 0 OPENA2 1 GNDA4 0 OPENB1 1 GNDB2 0 OPENB4 1 GNDC1 0 OPENC2 1 GNDC4 0 OPEND2 1 GNDD4 0 OPENGILHAM ALT 2 A1 1 GNDA2 0 OPENA4 1 GNDB1 0 OPENB2 1 GNDB4 0 OPENC1 1 GNDC2 0 OPENC4 1 GNDD2 0 OPEND4 1 GND
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 12SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 3(Cont). Complemented Mode S Transponder (UUT) Configuration(Mode S Interface Panel)Signal Name Switch Position Signal SenseANT BITE OFF OPENFUNC TEST OFF OPENSTBY/ON STBY GNDSYNC ALT FLAG No. 1 VLD +18 VSYNC ALT FLAG No. 2 INV OPENALT COMP OFF OPENALT SRC 2 GNDALT TYP SEL B 0 GNDA 1 OPENMAX AIRSPEED 15 0 GND16 1 OPEN17 0 GNDSDI B 0 GNDA 1 OPENDATA LINK DL OPENCNTL PNL A GNDAIR/GND No. 1 GROUND GNDAIR/GND No. 2 GROUND GND
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 13SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 4. Initial Setup For Internal RF Self-TestAddress Modify toC000H thru C006H 0000HC007H thru C00DH 5555HC00EH D457HC00FH AAAAHC01FH FFFFHC020H AAAAHC021H AAAAHC022H 5555HC023H 5555HC024H 000DHC025H 009EHC026H 00BFHC028H 002AHC02AH 5500HC02BH FFAAHC02FH 0007HNOTE 1: Read 1DW4 (location 0D604).NOTE 2: Copy bits 0 thru 3 of 1DW4 into bits 4 thru 7 and write the value 7H into bits 0 thru 3 of RF0DW15 (location 0C027).NOTE 3: Copy bits 4 thru 7 of 1DW4 plus 01DH into bits 0 thru 5 of RF 0DW17(location 0C029).
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 14SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 5. Initial Settings For Mode S And ATCRBS (Mode S SW Running)(Mode S Interface Panel)Signal Name Switch Position Signal SenseMODE S ADDRESS A1 0 OPENA2 1 GNDA3 0 OPENA4 1 GNDA5 0 OPENA6 1 GNDA7 0 OPENA8 1 GNDA9 0 OPENA10 1 GNDA11 0 OPENA12 1 GNDA13 0 OPENA14 1 GNDA15 0 OPENA16 1 GNDA17 0 OPENA18 1 GNDA19 0 OPENA20 1 GNDA21 0 OPENA22 1 GNDA23 0 OPENA24 1 GNDANT PGM 2 OPENANT CABLE DELAY T/B BOT OPENB 1 OPENA 1 OPENANT BITE ON GNDFUNC TEST OFF OPENSTBY/ON ON OPEN
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 15SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 5(Cont). Initial Settings For Mode S And ATCRBS (Mode S SW Running)(Mode S Interface Panel)Signal Name Switch Position Signal SenseALT COMP OFF OPENALT SRC SEL 2 GNDALT TYPE SEL B 1 OPENA 1 OPENCNTL PNL B OPENAIR/GND 1 GROUND GNDAIR/GND 2 AIR OPENNOTE 1: Disconnect all wires from MAINT DATA OUT A, B jacks on the Mode S interface panel.NOTE 2: Set up two ARINC sources as shown (can be provided by one 429 source with dual-labelcapability):Transmit speed:Transmit parity:Transmit rate:429 Label:429 Data:Connect to:(On MDS interfacepanel)SOURCE 1LOWODD168 ms016 (octal)1FFE48 (Hex)CNTL DATA BSOURCE 2LOWODD50 ms203 (octal)627740 (Hex)429 ADC 1 and429 ADC 2NOTE 3: Run Mode S software by removing or disabling the UDE or CPI interface from the UUT andreenergizing the unit.NOTE 4: The UDE or CPI must be removed or disabled to allow LRU software to operate.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 16SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 6. Initial 429 Setup (Internal Wrap)Config Reg Address Modify To0 0D218H 08888H1 0D21AH 08888H2 0D21CH 00000H3 0D400H 0FFE0HN/A 0D220H thru0D22EH0FFAAHTable 6.1. Walking 1S 429 Setup (Internal Wrap)Config Reg Address Modify To0 0D218H 08888H1 0D21AH 08888H2 0D21CH 00000H3 0D400H 0FFE0HN/A 0D220H thru0D22EH00000HTable 7. Initial 429 Setup (External Wrap)Config Reg Address Modify To0 0D218H 08888H1 0D21AH 088AAH2 0D21CH 00090H3 0D400H 0FF76HN/A 0D220H thru0D22EH0FF00H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 17SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONTable 8. Initial 429 I/O Interconnects (Mode S Interface Panel)From ToSignal Name UUT RearConnectorPin No.Signal Name UUT RearConnectorPin No.DATA LINK OUTAJ1B-5EDATA LINK INAJ1A-2AB J1B-5F B J1A-2BXT COORDAJ1A-5GTX COORDAJ1A-5EB J1A-5H B J1A-5FMAINT DATA INAJ1B-6AFLT IDAJ1A-6AB J1B-6B B J1A-6BMAINT DATA OUTAJ1B-6CMAINT DATA INAJ1A-6AB J1B-6D B J1A-6B429 ADC #1AJ1A-7HCNTL DATA AAJ1A-7AB J1A-7J B J1A-7B429 ADC #2AJ1B-5ACNTL DATA BAJ1A-7EB J1B-5B B J1A-7FFLT IDAJ1A-6ACNTL DATA AAJ1A-7AB J1A-6B B J1A-7BCNTL DATA AAJ1A-7ACNTL DATA BAJ1A-7EB J1A-7B B J1A-7F
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 18SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION4. POWER REQUIREMENTS115 ± 5 V ac, 400 ± 10 Hz115 ± 5 V ac or 230 ± 10 V ac, 48 to 66 Hz5. TEST EQUIPMENT5.1 Honeywell Test Equipment4066423-902 CPI (modified with connector board, Part No. 4067220)4067839 Mode S Interface Panel4067841-901 RF Cable4067841-902 RF Cable4067842 M-S LRU Cooling Tray4067846 SDP-185 UDEMT4061400-902 HP 64000/UDE Test SoftwareMT4061400-101 PC/CPI Test Software5.2 Commercial Test EquipmentIEEE-488 Cable, 10833AIFR ATC-1400A Transponder TesterIFR S-1403 Mode S TesterHP 64000 System, or equivalentJCAir 429E ARINC 429 Analyzer, or equivalentTektronix 2432A Digital Oscilloscope, or equivalentDigital Voltmeter, Fluke 77, or equivalentOmni Spectra, 2021-1314-02, or equivalent zero ohm terminatorOmni Spectra, 3082-2240-00, Type N-SMA or equivalent connectorIBM PC, or equivalent, with a Ziatech IEEE-488 interface card, ZT1444AG
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 19SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION6. TEST SETUP6.1 Turn on the commercial test equipment and allow it to warm up. Verify that the test equipment usedis calibrated and working properly.6.2 Connect the UUT to the IFR test equipment, Mode S interface panel, and HP 64000 system. (Seefigure 1.)7. TEST REQUIREMENTS7.1 The IFR equipment requires a 5-minute warmup period. No other warmup is required before testingthe Mode S Transponder.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 20SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONFigure 1. Initial Test Equipment Setup
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 21SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONFigure 2. Timing Diagrams
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 22SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION7.2 The test steps shall be performed in the order listed. In the event of a failure and repair, the testmust be performed again from the beginning.7.3 All control settings that are altered during the course of a specific test should be returned to theirinitial settings before starting a new procedure.7.4 This procedure is intended to be performed by a knowledgeable technician or engineer. It isassumed that the equipment will be energized and deenergized as appropriate when changingconnections and setups.7.5 Individual column definitions are as follows:Column DescriptionRev Ltr Revision letters are used to identify revised material.Test No. Tests are numbered in sequence.Opr Limits Unit under test (UUT) shall meet these limits when tested at other thanthe manufacturing facility. When an item is marked OPTIONAL, thecorresponding test is not required except as an aid in troubleshooting.Test Description These items are the parameters to which the UUT was designed andaid in troubleshooting by specifying the input and output signalterminals. All conditions required are not repeated for each test, andconditions established in previous tests also apply.Switch Pos Positions to which switches must be set are listed in required orderand are grouped to correspond to applicable work steps.Work Steps This column defines the operations necessary to perform a test andachieve a result. Set switches to designated positions beforeperforming corresponding work step.Mfg Limits UUT shall meet these limits at final buyoff before customer delivery.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTS 23SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8. TEST PROCEDURE8.1 Perform tests 1 thru 28 if using the HP 64000 emulation system.8.2 Perform tests A1 thru A10 in Appendix A if using the PC/CPI emulation system.8.3 When alternative tests A1 thru A10 are completed, perform tests 11 thru 28 to complete the testprocedures.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 24SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION1 SOFTWARE LOAD SOFTWARE LOADWhile running theSDP-185 monitor program(refer to paragraph 3.3.1),modify the followingSDP-185 registers asshown: Modify registerCACHE to 1.Modify registerEPROM_EN to 1.Run the SDP-185 monitorprogram (refer toparagraph 3.3.1).Modify the followingSDP-185 registers asshown:Enter "modify registerCACHE to 1""modify registerEPROM_EN to 1"1.1 7FDE:580D7FDF:EEE0Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -902.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -902.7FDE:580D7FDF:EEE01.2 7FDE:718F7FDF:3150Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -903.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -903.7FDE:718F7FDF:31501.3 7FDE:0E2D7FDF:F202Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -904.Enter "display memory07FDEH thru 07FDFH"The values shall be aspecified for a -904.7FDE:0E2D7FDF:F2021.4 7FDE:43537FDF:F5DFObserve the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -905not MOD E.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -905 notMOD E.7FDE:43537FDF:F5DF1.5 7FDE:6C8B7FDF:BA1DObserve the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -905MOD E.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -905 MODE.7FDE:6C8B7FDF:BA1D
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 25SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION2 CACHE RAM CACHE RAMModify register CACHE to0.Modify register CACHE to0.If this IT is beingperformed using anautomated test facility,complete test 2.1.If this IT is beingperformed using anautomated test facility,complete test 2.1.If this IT is beingperformed using themanual test fixture,complete test 2.2.If this IT is beingperformed using themanual test fixture,complete test 2.2.2.1 N/A Automated Procedure Automated Procedure N/AWrite the cache RAMaddress (0000H thru3FFFH) to each location incache RAM (20000H thru23FFFH).Write the cache RAMaddress (0000H thru3FFFH) to each location incache RAM (20000H thru23FFFH).2.1.1 0000H thru3FFFHVerify that each cacheRAM location contains thecorrect data.Verify that each cacheRAM location contains thecorrect data.0000H thru3FFFHWrite the complement ofeach cache RAM address(FFFFH thru C000H) toeach location in cacheRAM (20000H thru23FFFH).Write the complement ofeach cache RAM address(FFFFH thru C000H) toeach location in cacheRAM (20000H thru23FFFH).2.1.2 FFFFH thruC000HVerify that each cacheRAM location contains thecorrect data.Verify that each cacheRAM location contains thecorrect data.FFFFH thruC000H2.2 N/A Manual Test Procedure Manual Test Procedure N/AEnter "modify memory20000H thru 23FFFH to0AAAAH"Enter "modify memory20000H thru 23FFFH to0AAAAH"2.2.1 AAAAH Enter "display memory20000H thru 2007FH"Enter "display memory20000H thru 2007FH"AAAAHEnter "modify memory20000H thru 23FFFH to05555H"Enter "modify memory20000H thru 23FFFH to05555H"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 26SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION2.2.2 5555H Enter "display memory20000H thru 2007FH"Enter "display memory20000H thru 2007FH"5555H2.2.3 5555H Enter "display memory23E80H thru 23FFFH"Enter "display memory23E80H thru 23FFFH"5555H3 N/A EEPROM EEPROM N/AEnter "modify registerCACHE TO 0"Enter "modify registerCACHE to 0"Write LRU dash and serialnumbers to the EEPROMlocations 9FC0H to9FCAH respectively. D/Nstands for dash numberand S/N stands for serialnumber.Enter "modify memory20000H thru 2000AH to(1st digit of D/N).(2nd digit of D/N).(3rd digit of D/N).(1st digit of S/N).(2nd digit of S/N).(3rd digit of S/N).(4th digit of S/N).(5th digit of S/N).(6th digit of S/N).(7th digit of S/N).(8th digit of S/N)."D/N stands for dashnumber and S/N for serialnumber.Enter "END"Switch HBDIS* on UDE(LED shall be illuminated).
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 27SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.1 N/A Enter "SW IT30P" N/AEnter "run from startup"NOTE: EEPROM is only8 bits wide, instead of 16.If 16 bits of data arespecified, only the leastsignificant 8 bits are used.Thus, FE34H is the sameas 34H.Write the EEPROMaddress (00H thru FFH) toeach location in EEPROM(8000H thru 9FFFH).Verify each location.Program will take severalminutes to complete.Front panel LEDs shallflash in a repetitive patternwhile the program isexecuting. When theprogram is complete allsix LEDs shall beilluminated.Write the complement ofeach EEPROM address(FFH thru 00H) to eachlocation in EEPROM(8000H thru 9FFFH).Verify each location.Write the value FFH toeach location in EEPROM(8000H thru 9FFFH).Verify each location.Write the LRU dash andserial numbers, in ISO-5format, to the EEPROMlocations 9FC0H to9FCAH.Enter "modify registerCACHE to 0"3.2 PASS Enter "display memory20010H thru 20011H"Look in the ASCII decodedisplay for the Pass/Failindicator. Status shall beas indicated.PASSEnter "modify registerCACHE to 1"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 28SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION3.3 PASS Verify that each 8-bit wordin locations 9FC0H thru9FCAH contains theproper dash and serialnumbers.Enter "display memory9FC0H thru 9FCAH"Look in the ASCII decodedisplay and verify thateach 8-bit word containsthe proper dash and serialnumbers.PASSEnter "END"Switch HBDIS* on VDE(LED shall not illuminate).Enter "HW"4 VIDEO RAM VIDEO RAMWrite the video RAMaddress (C000H thruC00FH) to each locationin video RAM (C000H thruC00FH).Enter "modify registerCACHE to 1"Enter "modify memory0C000H thru 0C003H to0C000H, 0C001H,0C002H, 0C003H"Enter "modify memory0C004H thru 0C007H to0C004H, 0C005H,0C006H, 0C007H"Enter "modify memory0C008H thru 0C00BH to0C008H, 0C009H,0C00AH, 0C00BH"Enter "modify memory0C00CH thru 0C00FH to0C00CH, 0C00DH,0C00EH, 0C00FH"Enter "display memory0C000H thru 0C00FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 29SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION4.1 C000H thruC00FHVerify that each videoRAM location contains thecorrect data.Verify that each videoRAM location contains thecorrect data.C000H thruC00FHWrite the complement ofeach video RAM address(3FFFH thru 3FF0H) toeach location in videoRAM (C000H thruC00FH).Enter "modify memory0C000H thru 0C003H to3FFFH, 3FFEH, 3FFDH,3FFCH"Enter "modify memory0C004H thru 0C007H to3FFBH, 3FFAH, 3FF9H,3FF8H"Enter "modify memory0C008H thru 0C00BH to3FF7H, 3FF6H, 3FF5H,3FF4H"Enter "modify memory0C00CH thru 0C00FH to3FF3H, 3FF2H, 3FF1H,3FF0H"Enter "display memory0C000H thru 0C00FH"4.2 3FFFH thru3FF0HVerify that each videoRAM location contains thecorrect data.Verify that each videoRAM location contains thecorrect data.3FFFH thru3FF0H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 30SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION5 INPUT DISCRETES INPUT DISCRETESPerform test setup inaccordance with table 2.Perform test setup for thetransponder interfacepanel in accordance withtable 2.Read the followingmemory locations:Enter "modify registerCACHE to 1"Enter "display memory0D600H thru 0D605Hrepetitively"The memory locationsshall indicate as follows:(X = don't care)5.1 X355H orXB55HX4AAH orXCAAH5555H55XXH6AXXHXABFH,bit 12 = 00D600H0D601H0D602H0D603H0D604H0D605H0D600H0D601H0D602H0D603H0D604H0D605HX355H orXB55HX4AAH orXCAAH5555H55XXH6AXXHXABFH,bit 12 = 0Complement all of thediscrete input stimuli tothe UUT.Mode SInterfacePanelTable 3Complement all of thediscrete input stimuli tothe UUT by performingtest setup in accordancewith table 3.Read the followingmemory locations:The memory locationsshall indicate as follows:(X = don't care)5.2 X4AAH orXCAAHX355H orXB55HAAAAHAAXXH95XXHX744H,bit 12 = 10D600H0D601H0D602H0D603H0D604H0D605H0D600H0D601H0D602H0D603H0D604H0D605HX4AAH orXCAAHX355H orXB55HAAAAHAAXXH95XXHX744H,bit 12 = 1
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 31SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION5.3 X5XXH While pressing the PushTo Test button on thefront panel of the UUT,read memory locationD605H. The value shallbe as indicated.(X = don't care)While pressing the PushTo Test button on thefront panel of the UUT,enter "display memory0D605H". The value shallbe as indicated.(X = don't care)X5XXH6 OUTPUT DISCRETES OUTPUT DISCRETESPerform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.Write to Output Data Word0 and ConfigurationRegister 3 as shown:Write to Output Data Word0 and ConfigurationRegister 3 as shown:(Enter "modify memory<address> to <data>")Address Data0D607H 0012H0D400H 2A00HAddress Data0D607H 0012H0D400H 2A00HVerify the state of thefollowing UUT front panelLEDs:Verify the state of thefollowing UUT front panelLEDs:Signal Name Signal Name6.1 onoffoffonoffonXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGonoffoffonoffonVerify the followingsignals. The signal senseshall be as specified.Verify the followingsignals. The indicatorlamps on the Mode Sinterface panel (or thesignals themselves) shallbe as specified.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 32SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONSig/Lamp Sig/Lamp Sig/Lamp Sig/Lamp6.2 OPN/ON (Green)GND/OFFOPN/OFFGND/ON (Green)ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2OPN/ON (Green)GND/OFFOPN/OFFGND/ON (Green)Write to Output Data Word0 and ConfigurationRegister 3 as shown:Write to Output Data Word0 and ConfigurationRegister 3 as shown:(Enter "modify memory<address> to <data>")Address Data0D607H 0001H0D400H 1500HAddress Data0D607H 0001H0D400H 1500HVerify the state of thefollowing UUT front panelLEDs:Verify the state of thefollowing UUT front panelLEDs:Signal Name Signal Name6.3 offononoffonoffXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGoffononoffonoffVerify the followingsignals. The signal senseshall be as specified.Verify the followingsignals. The indicatorlamps on the Mode Sinterface panel (or thesignals themselves) shallbe as specified.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 33SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONSig/Lamp Signal Name Signal Name Sig/Lamp6.4 GND/OFFOPN/ON (Red)+5V/ON (Red)OPN/OFFALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2GND/OFFOPN/ON (Red)+5V/ON (Red)OPN/OFF7 SYNCHRO ALTITUDE SYNCHRO ALTITUDEPerform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.Stimulate the UUTSYNCHRO REF H andSYNCHRO REF C signalswith a 26 V ac, 400 Hzsinusoidal waveform.Stimulate the UUTsynchro altitude inputswith a second 400 Hzsinusoid that issynchronous with thereference signal (above).Apply this signal acrossthe following UUT synchroinputs with the negativeside of the signalconnected to the Z input:Mode SInterfacePanel26 VAC POL= +On the Mode S interfacepanel, connect the 26 Vac REF + and - signals tothe Sync Alt 1/2 RH andRC signals. Connect theTEST VAC + signal to theFX, FY, CX, and CYsignals. Connect theTEST VAC - signal to theFZ and CZ signals.Adjust the amplitude ofthe TEST VAC signal to 9V rms.SYNC ALT 1 FINE X-ZSYNC ALT 1 FINE Y-ZSYNC ALT 1 CRSE X-ZSYNC ALT 1 CRSE Y-ZSYNC ALT 2 FINE X-ZSYNC ALT 2 FINE Y-ZSYNC ALT 2 CRSE X-ZSYNC ALT 2 CRSE Y-Z
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 34SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION1. Adjust the amplitude of this signal to 9 V rms.Read the digital value foreach synchro source,using the followingprocedure:Read the digital value foreach synchro source,using the followingprocedure:1. Write the appropriate data (see following table) to memory location D607H.2. Wait at least 75 µs.3. Read location D606H.4. Record the value.1. Write the appropriate data (see following table) to memory location D607H.2. Enter "modify memory 0D607H to <value from table>"3. Enter "display memory 0D606H thru 0D606H"4. Record the value.The data should fall withinthe range shown in theLimits.The data should fall withinthe range shown in theLimits.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 35SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONWrite SourceTo BeingD607H TestedWrite SourceTo BeingD607H Tested7.1CD5 ± 6FH0HCD5 ± 6FH1HCD5 ± 6FH2HCD5 ± 6FH3HCD5 ± 6FH4HCD5 ± 6FH5HCD5 ± 6FH6HCD5 ± 6FH7H0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01A0H ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01C0H ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01E0H ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01A0H ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01C0H ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01E0H ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)CD5 ± 6FH0HCD5 ± 6FH1HCD5 ± 6FH2HCD5 ± 6FH3HCD5 ± 6FH4HCD5 ± 6FH5HCD5 ± 6FH6HCD5 ± 6FH7HReverse the phase 180degrees on theSYNCHRO REFERENCEinput to the UUT.Mode SInterfacePanel26 VAC POL= -Reverse the phase 180degrees on theSYNCHRO REFERENCEinput to the UUT.Read the digital value foreach synchro source,using the followingprocedure:Read the digital value foreach synchro source,using the followingprocedure:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 36SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION1. Write the appropriate data (see following table) to memory location D607H.2. Wait at least 75 µs.3. Read location D606H.4. Record the value.1. Write the appropriate data (see following table) to memory location D607H.2. Enter "modify memory 0D607H to <value from table>"3. Enter "display memory D606H"4. Record the value.The data should fall withinthe range shown in theLimits.The data should fall withinthe range shown in theLimits.Write SourceTo BeingD607H TestedWrite SourceTo BeingD607H Tested7.2329 ± 6FH0H329 ± 6FH1H329 ± 6FH2H329 ± 6FH3H329 ± 6FH4H329 ± 6FH5H329 ± 6FH6H329 ± 6FH7H0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01A0H ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01C0H ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01E0H ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01A0H ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01C0H ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01E0H ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)329 ± 6FH0H329 ± 6FH1H329 ± 6FH2H329 ± 6FH3H329 ± 6FH4H329 ± 6FH5H329 ± 6FH6H329 ± 6FH7H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 37SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8 429 RECEIVER TESTS(INTERNAL)429 RECEIVER TESTS(INTERNAL)Internal wrap on receiver0 thru 7.Perform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.(Accept AAH label with nomasking)(Accept AAH label with nomasking)8.1 N/A Perform initial setup inaccordance with table 6.Perform initial setup inaccordance with table 6.N/AModify memory:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Read the following blockof memory: D200H thruD20FH.Enter "display memory0D200H thru 0D20FH"8.2 AAAAH2AAAHEven LocationsOdd LocationsEven LocationsOdd LocationsAAAAH2AAAH(Reject even parity data,no label qualification)(Reject even parity data,no label qualification)8.3 N/A Perform initial setup pertable 6 except:Address Data0D21CH 0249H0D220H - 0D22EH 0044HPerform initial setup pertable 6 except:Address Data0D21CH 0249H0D220H - 0D22EH 0044HN/AModify memory:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 38SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.4 AAAAH2AAAH(no changefrom test 8.2)Even LocationsOdd Locations(Reject nonmatchinglabels)Even LocationsOdd Locations(Reject nonmatchinglabels)AAAAH2AAAH(no changefrom test 8.2)8.5 N/A Perform initial setup inaccordance with table 6except:Address Data0D220H - 0D22EH EF44HPerform initial setup inaccordance with table 6except:Address Data0D220H - 0D22EH EF44HN/AModify memory:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Read the following blockof memory: D200H thruD20FH.Enter "display memory0D200H thru 0D20FH"8.6 AAAAH2AAAH(no changefrom test 8.2)Even LocationsOdd Locations(Reject due to disablefeature)Even LocationsOdd Locations(Reject due to disablefeature)AAAAH2AAAH(no changefrom test 8.2)8.7 N/A Perform initial setup inaccordance with table 6except:Address Data0D218H 0000H0D21AH 0000H0D220H - 0D22EH EE44HPerform initial setup inaccordance with table 6except:Address Data0D218H 0000H0D21AH 0000H0D220H - 0D22EH EE44HN/AModify memory:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 39SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.8 AAAAH2AAAH(no change)Even LocationsOdd LocationsEven LocationsOdd LocationsAAAAH2AAAH(no change)(Accept valid data andlabel)(Accept valid data andlabel)8.9 N/A Perform initial setup inaccordance with table 6except:Address Data0D220H - 0D22EH EE44HPerform initial setup inaccordance with table 6except:Address Data0D220H - 0D22EH EE44HN/AModify memory:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Read the following blockof memory: 0D200H thru3D20FH.Enter "display memory0D200H thru 0D20FH"8.10 5555HD555HEven LocationsOdd LocationsEven LocationsOdd Locations5555HD555H8.11 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 8000H0D211H 0000HEnter "modify memory0D210H to 8000H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.12 8000H0000HEven locationsOdd locationsEven locationsOdd locations8000H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 40SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.13 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 4000H0D211H 0000HEnter "modify memory0D210H to 4000H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.14 4000H0000HEven locationsOdd locationsEven locationsOdd locations4000H0000H8.15 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 2000H0D211H 0000HEnter "modify memory0D210H to 2000H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.16 2000H0000HEven locationsOdd locationsEven locationsOdd locations2000H0000H8.17 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 1000H0D211H 0000HEnter "modify memory0D210H to 1000H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.18 1000H0000HEven locationsOdd locationsEven locationsOdd locations1000H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 41SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.19 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0800H0D211H 0000HEnter "modify memory0D210H to 0800H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.20 0800H0000HEven locationsOdd locationsEven locationsOdd locations0800H0000H8.21 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0400H0D211H 0000HEnter "modify memory0D210H to 0400H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.22 0400H0000HEven locationsOdd locationsEven locationsOdd locations0400H0000H8.23 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0200H0D211H 0000HEnter "modify memory0D210H to 0200H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.24 0200H0000HEven locationsOdd locationsEven locationsOdd locations0200H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 42SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.25 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0100H0D211H 0000HEnter "modify memory0D210H to 0100H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.26 0100H0000HEven locationsOdd locationsEven locationsOdd locations0100H0000H8.27 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0080H0D211H 0000HEnter "modify memory0D210H to 0080H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.28 0080H0000HEven locationsOdd locationsEven locationsOdd locations0080H0000H8.29 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0040H0D211H 0000HEnter "modify memory0D210H to 0040H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.30 0040H0000HEven locationsOdd locationsEven locationsOdd locations0040H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 43SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.31 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0020H0D211H 0000HEnter "modify memory0D210H to 0020H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.32 0020H0000HEven locationsOdd locationsEven locationsOdd locations0020H0000H8.33 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0010H0D211H 0000HEnter "modify memory0D210H to 0010H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.34 0010H0000HEven locationsOdd locationsEven locationsOdd locations0010H0000H8.35 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0008H0D211H 0000HEnter "modify memory0D210H to 0008H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.36 0008H0000HEven locationsOdd locationsEven locationsOdd locations0008H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 44SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.37 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0004H0D211H 0000HEnter "modify memory0D210H to 0004H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.38 0004H0000HEven locationsOdd locationsEven locationsOdd locations0004H0000H8.39 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0002H0D211H 0000HEnter "modify memory0D210H to 0002H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.40 0002H0000HEven locationsOdd locationsEven locationsOdd locations0002H0000H8.41 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0001H0D211H 0000HEnter "modify memory0D210H to 0001H"Enter "modify memory0D211H to 0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.42 0001H0000HEven locationsOdd locationsEven locationsOdd locations0001H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 45SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.43 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 8000HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 8000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.44 0000H8000HEven locationsOdd locationsEven locationsOdd locations0000H8000H8.45 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 4000HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 4000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.46 0000H4000HEven locationsOdd locationsEven locationsOdd locations0000H4000H8.47 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 2000HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 2000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.48 0000H2000HEven locationsOdd locationsEven locationsOdd locations0000H2000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 46SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.49 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 1000HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 1000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.50 0000H1000HEven locationsOdd locationsEven locationsOdd locations0000H1000H8.51 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0800HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0800H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.52 0000H0800HEven locationsOdd locationsEven locationsOdd locations0000H0800H8.53 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0400HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0400H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.54 0000H0400HEven locationsOdd locationsEven locationsOdd locations0000H0400H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 47SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.55 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0200HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0200H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.56 0000H0200HEven locationsOdd locationsEven locationsOdd locations0000H0200H8.57 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0100HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0100H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.58 0000H0100HEven locationsOdd locationsEven locationsOdd locations0000H0100H8.59 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0080HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0080H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.60 0000H0080HEven locationsOdd locationsEven locationsOdd locations0000H0080H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 48SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.61 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0040HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0040H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.62 0000H0040HEven locationsOdd locationsEven locationsOdd locations0000H0040H8.63 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0020HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0020H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.64 0000H0020HEven locationsOdd locationsEven locationsOdd locations0000H0020H8.65 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0010HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0010H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.66 0000H0010HEven locationsOdd locationsEven locationsOdd locations0000H0010H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 49SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.67 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0008HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0008H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.68 0000H0008HEven locationsOdd locationsEven locationsOdd locations0000H0008H8.69 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0004HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0004H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.70 0000H0004HEven locationsOdd locationsEven locationsOdd locations0000H0004H8.71 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0002HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0002H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.72 0000H0002HEven locationsOdd locationsEven locationsOdd locations0000H0002H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 50SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION8.73 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0001HEnter "modify memory0D210H to 0000H"Enter "modify memory0D211H to 0001H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memory0D200H thru 0D20FH"8.74 0000H0001HEven locationsOdd locationsEven locationsOdd locations0000H0001H9 429 RECEIVER/TRANSMITTER TESTS(EXTERNAL)429 RECEIVER/TRANSMITTER TESTS(EXTERNAL)Perform test setup inaccordance with tables 2and 8.Perform test setup inaccordance with tables 2and 8.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 51SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONXmtr 0/Rcvr 0 Xmtr 0/Rcvr 09.1 N/A (MAINT DATA OUT/AIRDATA 1)(MAINT DATA OUT/AIRDATA 1)N/AConnect Xmtr 0 (MaintData Out) to Rcvr 0 (429Air Data 1).Perform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D220H FFAAHEnter "modify memory0D220H to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D200 thru 0D201H"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 52SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.2 AAAAH2AAAH0D200H0D201H0D200H0D201HAAAAH2AAAHOn Mode S interfacepanel, removeconnections on 429 ADC#1 and reconnect on 575ADC #1.On Mode S interfacepanel, removeconnections on 429 ADC#1 and reconnect on 575ADC #1.Modify receiver label:Address Data0D220H FF55HEnter "modify memory0D220H to FF55H"Modify transmitter data:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D200H thru 0D201H"Data should read asfollows:Data should read asfollows:Address Address9.3 5555HD555H0D200H0D201H0D200H0D201H5555HD555H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 53SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONXmtr 0/Rcvr 1 Xmtr 0/Rcvr 19.4 N/A (MAINT DATA OUT/AIRDATA 2)(MAINT DATA OUT/AIRDATA 2)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D222H FFAAHEnter "modify memory0D222H to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D202H thru 0D203H"Data should read asfollows:Data should read asfollows:Address Address9.5 AAAAH2AAAH0D202H0D203H0D202H0D203HAAAAH2AAAHOn Mode S interfacepanel, removeconnections on 429 ADC#2 and reconnect on 575ADC #2.On Mode S interfacepanel, removeconnections on 429 ADC#2 and reconnect on 575ADC #2.Modify receiver label:Address Data0D222H FF55HEnter "modify memory0D222H to FF55H"Modify transmitter data:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D202H thru 0D203H"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 54SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.6 5555HD555H0D202H0D203H0D202H0D203H5555HD555HXmtr 0/Rcvr 2 Xmtr 0/Rcvr 29.7 N/A (MAINT DATA OUT/CNTLDATA B)(MAINT DATA OUT/CNTLDATA B)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D224H FFAAHEnter "modify memory0D224H to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D204H thru 0D205H"Data should read asfollows:Data should read asfollows:Address Address9.8 AAAAH2AAAH0D204H0D205H0D204H0D205HAAAAH2AAAHModify receiver label:Address Data0D224H FF55HEnter "modify memory0D224H to FF55H"Modify transmitter data:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D204H thru 0D205H"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 55SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.9 5555HD555H0D204H0D205H0D204H0D205H5555HD555HXmtr 0/Rcvr 3 Xmtr 0/Rcvr 39.10 N/A (MAINT DATAOUT/MAINT DATA IN)(MAINT DATAOUT/MAINT DATA IN)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D226H FFAAHEnter "modify memory0D226H to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D206H thru 0D207H"Data should read asfollows:Data should read asfollows:Address Address9.11 AAAAH2AAAH0D206H0D207H0D206H0D207HAAAAH2AAAHModify receiver label:Address Data0D226H FF55HEnter "modify memory0D226H to FF55H"Modify transmitter data:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D206H thru 0D207H"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 56SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.12 5555HD555H0D206H0D207H0D206H0D207H5555HD555HXmtr 0/Rcvr 6 Xmtr 0/Rcvr 69.13 N/A (MAINT DATAOUT/FLIGHT ID)(MAINT DATAOUT/FLIGHT ID)N/APerform setup inaccordance with table 7.Perform setup inaccordance with table 7.Modify receiver label:Address Data0D22CH FFAAHEnter "modify memory0D22CH to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D20CH thru 0D20DH"Data should read asfollows:Data should read asfollows:Address Address9.14 AAAAH2AAAH0D20CH0D20DH0D20CH0D20DHAAAAH2AAAHModify receiver label:Address Data0D22CH FF55HEnter "modify memory0D22CH to FF55H"Modify transmitter data:Address Data0D210H 555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D20CH thru 0D20DH"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 57SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.15 5555HD555H0D20CH0D20DH0D20CH0D20DH5555HD555HXmtr 0/Rcvr 7 Xmtr 0/Rcvr 79.16 N/A (MAINT DATA OUT/CNTLDATA A)(MAINT DATA OUT/CNTLDATA A)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D22EH FFAAHEnter "modify memory0D22EH to FFAAH"Modify transmitter data:Address Data0D210H AAAAH0D211H AAAAHEnter "modify memory0D210H thru 0D211H toAAAAH"Enter "display memory0D20EH thru 0D20FH"Data should read asfollows:Data should read asfollows:Address Address9.17 AAAAH2AAAH0D20EH0D20FH0D20EH0D20FHAAAAH2AAAHModify receiver label:Address Data0D22EH FF55HEnter "modify memory0D22EH to FF55H"Modify transmitter data:Address Data0D210H 5555H0D211H 5555HEnter "modify memory0D210H thru 0D211H to5555H"Enter "display memory0D20EH thru 0D20FH"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 58SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.18 5555HD555H0D20EH0D20FH0D20EH0D20FH5555HD555HXmtr 1/Rcvr 4 Xmtr 1/Rcvr 49.19 N/A (XT COORD/TX COORD) (XT COORD/TX COORD) N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D228H FFAAHEnter "modify memory0D228H to FFAAH"Modify transmitter data:Address Data0D212H AAAAH0D213H AAAAHEnter "modify memory0D212H thru 0D213H toAAAAH"Enter "display memory0D208H thru 0D209H"Data should read asfollows:Data should read asfollows:Address Address9.20 AAAAH2AAAH0D208H0D209H0D208H0D209HAAAAH2AAAHModify receiver label:Address Data0D228H FF55HEnter "modify memory0D228H to FF55H"Modify transmitter data:Address Data0D212H 5555H0D213H 5555HEnter "modify memory0D212H thru 0D213H to5555H"Enter "display memory0D208H thru 0D209H"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 59SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.21 5555HD555H0D208H0D209H0D208H0D209H5555HD555HXmtr 2/Rcvr 5 Xmtr 2/Rcvr 59.22 N/A (DATA LINK OUT/DATALINK IN)(DATA LINK OUT/DATALINK IN)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address Data0D22AH FFAAHEnter "modify memory0D22AH to FFAAH"Modify transmitter data:Address Data0D214H AAAAH0D215H AAAAHEnter "modify memory0D214H thru 0D215H toAAAAH"Enter "display memory0D20AH thru 0D20BH"Data should read asfollows:Data should read asfollows:Address Address9.23 AAAAH2AAAH0D20AH0D20BH0D20AH0D20BHAAAAH2AAAHModify receiver label:Address Data0D22AH FF55HEnter "modify memory0D22AH to FF55H"Modify transmitter data:Address Data0D214H 5555H0D215H 5555HEnter "modify memory0D214H thru 0D215H to5555H"Enter "display memory0D20AH thru 0D20BH"Data should read asfollows:Data should read asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 60SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address9.24 5555HD555H0D20AH0D20BH0D20AH0D20BH5555HD555H10 INTERNAL RFSELF-TESTINTERNAL RFSELF-TESTPerform test setup inaccordance with table 4.Set up video ASICaccording to table 4.Mode SInterfacePanelSTBY/ON: ONPerform test setup inaccordance with table 4.Enter "END"Disable heartbeat byswitching HBDIS* switchon the UDE (LED shouldbe illuminated).Enter "SWIT100P"Enter "trace aboutaddress FINISHEDbreak_onmeasurement_complete"Enter "run fromSTARTUP". Programtakes only a fraction of asecond to run. When allsix front panel LEDs areilluminated, program iscomplete.Enter "modify registerCACHE to 1"Short Mode SBottom AntennaShort Mode SBottom Antenna10.1 N/A Initiate the self-test bywriting to memory asshown.Address Data0C02EH 0031HEnter "modify memory0C02EH to 0031H"Enter "display memory0C000H thru 0C003H"N/AThe received interrogationdata shall be as shown. Data shall indicate asfollows:
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 61SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAddress Address10.2 5555H 0C000H thru 0C003H 0C000H thru 0C003H 5555HLong Mode STop AntennaLong Mode STop Antenna10.3 N/A Initiate the self-test bywriting to memory asshown.Address Data0C007H thru0C00DH AAAAH0C02EH 0037HEnter "modify memory0C007H thru 0C00DH toAAAAH"Enter "modify memory0C02EH to 0037H"Enter "display memory0C000H thru 0C007H"N/AThe received interrogationdata shall be as shown. Data shall indicate asfollows:Address Address10.4 AAAAH 0C000H thru 0C006H 0C000H thru 0C006H AAAAHMode S Long SquitterTop Antenna Pwr VldMode S Long SquitterTop Antenna Pwr Vld10.5 N/A Set up reply data bywriting to memory asshown. (Send preamblepulses only.)Address Data0C007H F000H0C008H thru0C00DH 0000HMode SInterfacePanelSTBY/ON: ONEnter "modify memory0C007H to F000H"Enter "modify memory0C008H thru 0C00DH to0000H"N/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 003FHEnter "modify memory0C02EH to 003FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 62SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION10.6 XXX8Hbits 4 and5 = 1Observe the top antennapower valid signal byreading the self-test statusword, address 0C011H.This word shall be asspecified.Enter "display memory0C011H thru 0C011H"Location shall be asspecified.XXX8Hbits 4 and5 = 1(X = don't care) (X = don't care)Mode S Long SquitterBot Antenna Pwr VldMode S Long SquitterBot Antenna Pwr Vld10.7 N/A Initiate the self-test bywriting to memory asshown.Address Data0C02EH 003DHMode SInterfacePanelSTBY/ON: ONEnter "modify memory0C02EH to 003DH"N/A10.8 XXXX4Hbits 4 and5 = 1Observe the bottomantenna power validsignal by reading the self-test status word, address0C011H. This word shallbe as specified.Enter "display memory0C011H thru 0C011H"This location shall be asspecified.XXXX4Hbits 4 and5 = 1(X = don't care) (X = don't care)ATCRBS Mode ATop AntennaATCRBS Mode ATop Antenna10.9 N/A Set up interrogation datafor Mode A.Address Data0C007H E000H0C008H 0000H0C009H E000H0C00AH 0000H0C00BH 0000H0C00CH 0000H0C00DH 0000HModify memory accordingto the following table:(Enter "modify memory<address> to <data>")Address Data0C007H E000H0C008H 0000H0C009H E000H0C00AH 0000H0C00BH 0000H0C00CH 0000H0C00DH 0000HN/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 0036HEnter "modify memory0C02EH to 0036H"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 63SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION10.10 XXX2H Observe the Mode Asignal by reading the self-test status word, address0C011H. Word shall beas specified.Enter "display memory0C011H thru 0C011H"This location shall be asspecified.XXX2H(X = don't care) (X = don't care)ATCRBS Mode CBot AntennaATCRBS Mode CBot Antenna10.11 N/A Set up interrogation datafor Mode C.Address Data0C007H E000H0C008H 0000H0C009H 0000H0C00AH 0000H0C00BH 0000H0C00CH 0E00H0C00DH 0000HModify memory accordingto the following table:(Enter "modify memory<address> to <data>")Address Data0C007H E000H0C008H 0000H0C009H 0000H0C00AH 0000H0C00BH 0000H0C00CH 0E00H0C00DH 0000HN/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 0030HEnter "modify memory0C02EH to 0030H"10.12 XXX1H Observe the Mode Asignal by reading theself-test status word,address 0C011H. Wordshall be as specified.Enter "display memory0C011H thru 0C011H"This location shall be asspecified.XXX1H(X = don't care) (X = don't care)
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 64SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION10.13 N/A Perform test setup inaccordance with table 1.Perform test setup inaccordance with table 1.N/ASTBY/ONdiscrete(hardware path)S-1403FUNC 1Interrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate and power.ATC-1400AXPDR MODEAPRF: 0450RF Lvl: -50CW/NORM/OFF: NORMTurn XPDR MODE controlknob to A position. TurnPRF thumbwheels to 450Hz.Mode SInterfacePanelSTBY/ON: ON10.14 >90% Observe the ATCRBS %reply. The value shall beas specified.Read the % reply displayon the ATC-1400A. Thedisplay shall indicate asspecified.>98%Switch the UUT toSTANDBY mode.Mode SIntefacePanelSTBY/ON: STBYOn the Mode S interfacepanel, toggle theSTBY/ON switch to theSTBY position.10.15 <10% Observe the ATCRBS %reply. The value shall beas specified.Read the % reply displayon the ATC-1400A. Thedisplay shall indicate asspecified.<2%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 65SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11 ATCRBS MTL, REPLYFREQUENCY, DELAY,AND POWERATCRBS MTL, REPLYFREQUENCY, DELAY,AND POWERPerform test setup inaccordance with tables 1and 5, except set CNTLDATA B source as shown.CNTL DATA B429 sourcesettingsSPD: lowPAR: oddRATE: 168 msLBL: 016DATA: 007E38Perform test setup inaccordance with tables 1and 5, except set CNTLDATA B source as shown.S-1403FUNC 1Remove the emulationsystem from the UUT.Turn on the UUT.Remove the HP 64000emulation system byperforming the followingsteps:1. Type "END" on the HP 64000 keyboard.2. Turn off UUT.3. Remove UDE connector from the UUT.4. Turn on UUT.Interrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate.ATC-1400AXPDR MDE APRF: 0450Turn XPDR MODE controlto MODE A position. TurnPRF thumbwheels to 450Hz.ATCRBS MTL at1029.8 MHzATCRBS MTL at1029.8 MHz11.1 N/A Set the interrogationfrequency to 1029.8 MHz.ATC-1400ADSPLY SEL: FREQFREQ andDELTA F: asrequiredTurn thumbwheels onFREQ SELECT andDELTA F until FREQDISPLAY indicates1029.80 MHz.N/ASet the interrogation levelto -70 dBm.ATC-1400ARF Lvl: -70Set ATC-1400A RF levelto -70 dBm.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 66SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11.2 ID 0077 Observe the 4096 codereturned by the UUT.Code shall be asspecified.ATC-1400ACW/NORM/OFF: NORMDPLY SEL: XPDR CODEObserve the XPDR CODEdisplay. Display shallindicate as specified.ID 007711.3 250 TO 630WattsMeasure and record thebottom antenna F1 pulsepower. The power shallbe within the limitsspecified.ATC-1400AF2/P2F1/P1: F1On the ATC-1400A,observe and record theXMTR PWR display. Thismeasurement is thebottom antenna F1 power,and shall be within thelimits specified.280 to 550Watts11.4 -76 ± 4 dBm Slowly decrement theinterrogation level in 1-dBsteps until the % reply isless than 90%, thenincrement by 1 dB. Theinterrogation level shall beas specified. Record thevalue.Slowly decrement the RFLEVEL knob on theATC-1400A in 1-dB stepsuntil the % reply indicatesless than 90%, thenincrement the RF level by1 dB. The RF level shallindicate as specified.Record the value.-76 ± 4 dBmInterrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate.ATC-1400AXPDR MDE APRF: 0450Turn XPDR MODE controlto MODE A position. TurnPRF thumbwheels to 450Hz.ATCRBS MTL at1030.0 MHzATCRBS MTL at1030.0 MHz11.4.1 N/A Set the interrogationfrequency to 1030.0 MHz.ATC-1400ADSPLY SEL: FREQFREQ andDELTA F: asrequiredTurn thumbwheels onFREQ SELECT andDELTA F until FREQDISPLAY indicates1030.00 MHz.N/ASet the interrogation levelto -70 dBm.ATC-1400ARF Lvl: -70Set ATC-1400A RF levelto -70 dBm.11.4.2 ID 0077 Observe the 4096 codereturned by the UUT.Code shall be asspecified.ATC-1400ACW/NORM/OFF: NORMDPLY SEL: XPDR CODEObserve the XPDR CODEdisplay. Display shallindicate as specified.ID 0077
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 67SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11.4.3 -76 ± 4 dBm Slowly decrement theinterrogation level in 1-dBsteps until the % reply isless than 90%, thenincrement by 1 dB. Theinterrogation level shall beas specified. Record thevalue.Slowly decrement the RFLEVEL knob on theATC-1400A in 1-dB stepsuntil the % reply indicatesless than 90%, thenincrement the RF level by1 dB. The RF level shallindicate as specified.Record the value.-76 ± 4 dBm11.4.4 N/A Interrogate the UUT withan ATCRBS Mode Cinterrogation at thestandard rate.ATC-1400AXPDR MDE CCW/NORM: NORMTurn XPDR MODE controlto MODE C position,CW/NORM/OFF toNORM.N/ASet the interrogation levelto -70 dBm.ATC-1400ARF Lvl: -70Set ATC-1400A RF levelto -70 dBm.11.4.5 -76 ± 4 dBm Slowly decrement theinterrogation level in 1-dBsteps until the % reply isless than 90%, thenincrement by 1 dB. Theinterrogation level shall beas specified. Record thevalue.Slowly decrement the RFLEVEL knob on theATC-1400A in 1-dB stepsuntil the % reply indicatesless than 90%, thenincrement the RF level by1 dB. The RF level shallindicate as specified.Record the value.-76 ± 4 dBm11.4.6 <1.0 dB Compare values obtainedin tests 11.4.3 and 11.4.5.Value obtained in 11.4.3shall be equal to thatobtained in 11.4.5 ±1.0dB.Compare values obtainedin tests 11.4.3 and 11.4.5.Value obtained in 11.4.3shall be equal to thatobtained in 11.4.5 ±1.0dB.<1.0 dBATCRBS MTL at 1030.2MHZ, Top and BottomAntennas SwitchedATCRBS MTL at 1030.2MHZ, Top and BottomAntennas Switched
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 68SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11.5 N/A Disable interrogations andturn off the UUT.ATC-1400ACW/NORM: OFFTurn CW/NORM/OFFswitch to OFF position onthe ATC-1400A and turnoff the UUT.N/AReverse the antennacables connected to theMode S test equipment.Reverse the antennacables connected to theIFR ANT A and ANT Bports.Turn on the UUT. Turn on UUT.Interrogate the UUT withan ATCRBS Mode Cinterrogation at thestandard rate.ATC-1400AXPDR MDE CCW/NORM: NORMTurn XPDR MODE controlto MODE C position,CW/NORM/OFF toNORM.Set the interrogationfrequency to 1030.2 MHz.ATC-1400ADSPLY SEL: FREQFREQ andDELTA F: asrequiredTurn thumbwheels onFREQ SELECT andDELTA F until FREQDISPLAY indicates1030.20 MHz.Set the interrogation levelto -70 dBm.ATC-1400ARF Lvl: -70Set ATC-1400A RF levelto -70 dBm.11.6 7710 Observe the altitude codereturned by the UUT.Code shall be asspecified.ATC-1400ADSPLY SEL: XPDR CODEObserve the XPDR CODEdisplay. Display shallindicate as specified.7710
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 69SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11.7 -76 ± 4 dBm Slowly decrement theinterrogation level in 1-dBsteps until the % reply isless than 90%, thenincrement by 1 dB. Theinterrogation level shall beas specified. Record thevalue.Slowly decrement the RFLEVEL knob on theATC-1400A in 1-dB stepsuntil the % reply indicatesless than 90%, thenincrement the RF level by1 dB. The RF level shallindicate as specified.Record the value.-76 ± 4 dBmReturn the interrogationlevel to -50 dBm.ATC-1400ARF Lvl: -50Set ATC-1400A RF levelto -50 dBm.Return the interrogationfrequency to 1030.0 MHz.DSPLY SEL: FREQTurn thumbwheels onFREQ SELECT andDELTA F until FREQDISPLAY indicates1030.00 MHz.ATCRBS ReplyFrequencyATCRBS ReplyFrequency11.8 N/A Change the 429 Cntl DataB source to provide an all1s (7777) Mode A replywith SPI (ident).Cntl Data B429 sourcesettingsSPD: lowPAR: oddRATE: 168 msLBL: 016DATA: 1FFE48Change the 429 Cntl DataB source to provide an all1s (7777) Mode A replywith SPI (ident).N/A11.9 1090 ± 1MHzMeasure and record thereply frequency.Frequency shall be asspecified.ATC-1400AXPDR MDE AObserve the XMTR FREQdisplay on theATC-1400A. Display shallindicate as specified.Record the value.1090 ± 1MHzATCRBS Reply Delay ATCRBS Reply Delay11.10 N/A This test measures thereply delay.N/A
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 70SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION11.11 2.5 to 3.5 µs Measure and record thereply delay. Delay shallbe as specified.Observe the reply delayfield on the S-1403. Fieldshall indicate as specified.Record the value.2.5 to 3.5 µsATCRBS Reply Power ATCRBS Reply Power11.12 N/A This test measures thereply power.N/A11.13 250 to 630WattsMeasure and record thepeak reply power of theF1 pulse.ATC-1400AF2/P2F1/P1: F1On the ATC-1400A, selectthe F1 pulse for powerdetection. Observe andrecord the XMTR PWRdisplay. Display shallindicate as shown.280 to 550WattsSelect the ATCRBS F2pulse for power detection.S-1403CONTROLMENU 2,Pulse PowerGate: F2On the S-1403, changethe pulse power gate(PPG) field to F2.11.14 250 to 630WattsMeasure and record thetop antenna F2 pulsepower.ATC-1400AF2/P2F1/P1: F2On the ATC-1400A, selectthe F2 pulse for powerdetection. Observe andrecord the XMTR PWRdisplay. Thismeasurement is the topantenna F2 pulse power.280 to 550Watts11.15 <1 dB Calculate and record theabsolute value of thetransmitter droop (in dB),using the followingformula:Droop = ABS [10(Log10P1 - Log10 P2)], where P1and P2 are the powermeasurements taken intests 11.13 and 11.14,respectively. The droopshall not exceed thespecified limits.Calculate and record theabsolute value of thetransmitter droop (in dB),using the followingformula:Droop = ABS [10(Log10P1 - Log10 P2)], where P1and P2 are the powermeasurements taken intests 11.13 and 11.14,respectively. The droopshall not exceed thespecified limits.<1 dB
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 71SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION12 ATCRBSINTERROGATION PULSEWIDTH TOLERANCEATCRBSINTERROGATION PULSEWIDTH TOLERANCEPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withan ATCRBS Mode Ainterrogation with variableP1, P3 pulse width.Interrogate at thestandard rate.ATC-1400AXPDR MDE APRF: 0450XPDR PLSEWDTH: VARTurn DISPLAY SELECTcontrol to MODE Aposition. Turn PRFthumbwheels to 450 Hz.Set the XPDR PULSEWIDTH switch to VAR.Use the following table toset the P1, P3 pulsewidths. The % ATCRBSreply shall be as specified.ATC-1400ACW/NORM/OFF: NORMUse the following table toset the P1, P3 pulsewidths (on ATC-1400A,adjust the XPDR PULSEWIDTH thumbwheels).The % ATCRBS replyshall indicate as specified.12.1 >90%>90%<10%P1, P3 Pulse Width0.70 µs0.90 µs0.30 µsP1, P3 Pulse Width0.70 µs0.90 µs0.30 µs>98%>98%<2%Return the P1, P3 pulsewidth to the nominalsetting.ATC-1400AXPDR PLSEWDTH: CALOn the ATC-1400A, returnthe XPDR PULSE WIDTHswitch to the CALposition.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 72SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION13 ATCRBSINTERROGATION PULSEPOSITION TOLERANCE(MODE A)ATCRBSINTERROGATION PULSEPOSITION TOLERANCE(MODE A)Perform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate, withadjustable P1-P3 spacing.ATC-1400AXPDR MDE APRF: 0450Turn XPDR MODE controlto the A position. TurnPRF thumbwheels to 450Hz.Use the following table toset the spacing of theP1-P3 pulses. Theresulting ATCRBS % replyshall be as specified.ATC-1400ACW/NORM/OFF: NORMUse the following table toset the XPDR P2/P3 DEVthumbwheels and P3switch on the ATC-1400A.The resulting ATCRBS %reply shall be as specified.13.1 >90%>90%<10%<10%Dev Delta P1-P3 0.20 - 7.8 µs0.20 + 8.2 µs1.00 + 9.0 µs1.00 - 7.0 µsDev Delta P1-P3 0.20 - 7.8 µs0.20 + 8.2 µs1.00 + 9.0 µs1.00 - 7.0 µs>98%>98%<2%<2%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 73SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION14 ATCRBSINTERROGATION PULSEPOSITION TOLERANCE(MODE C)ATCRBSINTERROGATION PULSEPOSITION TOLERANCE(MODE C)Perform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withan ATCRBS Mode Cinterrogation at thestandard rate, withadjustable P1-P3 spacing.ATC-1400AXPDR MDE CPRF: 0450Turn XPDR MODE controlto the C position. TurnPRF thumbwheels to 450Hz.Use the following table toset the spacing of the P1-P3 pulses. The resultingATCRBS % reply shall beas specified.ATC-1400ACW/NORM/OFF: NORMUse the following table toset the XPDR P2/P3 DEVthumbwheels and P3switch on the ATC-1400A.The resulting ATCRBS %reply shall be as specified.14.1 >90%>90%<10%<10%Dev Delta P1-P3 0.20 - 20.8 µs0.20 + 21.2 µs1.00 + 22.0 µs1.00 - 20.0 µsDev Delta P1-P3 0.20 - 20.8 µs0.20 + 21.2 µs1.00 + 22.0 µs1.00 - 20.0 µs>98%>98%<2%<2%15 ATCRBS REPLY RATECAPABILITYATCRBS REPLY RATECAPABILITYPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 74SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONBurst Burst15.1 N/A Interrogate the UUT with aburst of 120 ATCRBSMode A interrogations at arate of 1200 per secondand power of -30 dBm.ATC-1400ACW/NORM/OFF: OFFXPDR MDE APRF: 1200RF Lvl: -30Turn XPDR MODE controlto MODE A position.Turn PRF thumbwheels to1200 Hz.Turn RF LEVEL knob to-30 dBm.N/AS-1403FUNC 7,ATC, 120ATC-1400ACW/NORM/OFF: NORMSelect FUNC 7 (BURST).Using the cursor keys andslew knob, change thefields in the FUNC 7 menuas follows: FUNC 7 ATC120.S-1403Press BURSTOn the S-1403, press theBURST key to initiate theinterrogations.15.2 >90% Observe the % ATCRBSreply. The value shall beas specified.Read the ATCRBS %reply display on theS-1403. The display shallindicate as specified.>98%Continuous Continuous15.3 N/A Interrogate the UUT withan ATCRBS Mode Ainterrogation at a rate of500 per second.ATC-1400AXPDR MDE APRF: 0500On the ATC-1400A, turnthe XPDR MODE knob tothe A position. Adjust thePRF thumbwheels to 500Hz.N/AS-1403FUNC 1On the S-1403, selectFUNC 1 (ATCRBS).
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 75SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION15.4 >90%ID = 7777Observe the % ATCRBSreply. The value shall beas specified. Data shallbe as specified.ATC-1400ACW/NORM/OFF: NORMRead the % reply displayon the ATC-1400A. Thedisplay shall indicate asspecified. Data shall beas specified.>98%ID = 7777Reply Rate Limit Reply Rate Limit15.5 N/A Interrogate the UUT withan ATCRBS Mode Ainterrogation at a rate of1500 per second.ATC-1400AXPDR MDE APRF: 1500On the ATC-1400A, turnthe XPDR MODE knob tothe A position. Adjust thePRF thumbwheels to 1500Hz.N/AS-1403FUNC 1On the S-1403, selectFUNC 1 (ATCRBS).15.6 >34% Observe and record the %ATCRBS reply. The valueshall be as specified.ATC-1400ACW/NORM/OFF: NORMRead and record the %reply display on theATC-1400A. The displayshall indicate as specified.43 to 46%ATCRBS SLSCharacteristicsATCRBS SLSCharacteristics15.7 N/A Perform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.N/AAmplitude Amplitude15.8 N/A Interrogate the UUT withan ATCRBS Mode Cinterrogation with P2 SLSpulse of adjustableamplitude. Interrogate atthe standard rate.ATC-1400AXPDR MDE CPRF: 0450SLS/ECHO: -0, ONTurn XPDR MODE controlto MODE C position.Turn PRF thumbwheels to450 Hz.Turn SLS/ECHO switch toON position.N/AUse the following table toadjust the interrogationRF level. The % ATCRBSreply for each case shallbe as specified.ATC-1400ACW/NORM/OFF: NORMUse the following table toadjust the interrogationRF level. The % ATCRBSreply for each case shallbe as specified.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 76SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION15.9 <10%<10%<10%<10%RF Level-68 dBm-40 dBm-21 dBm-50 dBmRF Level-68 dBm-40 dBm-21 dBm-50 dBm<2%<2%<2%<2%Reduce the amplitude ofP2 in 1-dB steps until the% reply is greater than90%.ATC-1400ASLS/ECHO: -XAdjust the SLSthumbwheels on theATC-1400A in 1-dB stepsuntil the % reply displayindicates >90%.15.10 -1 to -9 dB Record the amount of P2attenuation. This valueshall be within the limitsspecified.ATC-1400ACW/NORM/OFF: NORMRecord the value shownon the SLS thumbwheels.This value shall be withinthe limits specified.-1 to -9 dBAdjust the interrogationRF level to -21 dBm.ATC-1400ARF Lvl: -21SLS/ECHO: -0Adjust the interrogationRF level to -21 dBm.Reduce the amplitude ofP2 in 1-dB steps until the% reply is greater than90%.ATC-1400ACW/NORM/OFF: NORMBy adjusting the SLSthumbwheels on theATC-1400A, reduce theamplitude of P2 in 1-dBsteps until the % replydisplay reads >90%.15.11 -1 to -9 dB Record the amount of P2attenuation. This valueshall be within the limitsspecified.Record the value shownon the SLS thumbwheels.This value shall be withinthe limits specified.-1 to -9 dB
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 77SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONPosition Position15.12 N/A Set the P2 attenuation to0 dB.ATC-1400ASLS: -0, ONRF Lvl: -50Set the SLS/ECHOthumbwheels onATL-1400A to -0, ON.N/AAdjust the position of theP2 pulse as shown in thefollowing table. P2 Devindicates the amount bywhich the P2 position willmove, and Delta indicateswhether the deviation isadded or subtracted (+/-)to the nominal position.The % reply for eachposition shall be asshown.ATC-1400ACW/NORM/OFF: NORMAdjust the P2 DEVthumbwheels and switchas shown in the followingtable. P2 Dev indicatesthe amount by which theP2 position will move, andDelta indicates whetherthe deviation is added orsubtracted (+/-) to thenominal position. The %reply for each positionshall be as shown. (Readthe % reply on theATC-1400A.)15.13 >90%>90%<10%<10%P2 Dev Delta0.70 -0.70 +0.15 +0.15 -P2 Dev Delta0.70 -0.70 +0.15 +0.15 ->98%>98%<2%<2%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 78SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION16 ATCRBS ONLY ALL-CALL, SHORT P4POSITIONATCRBS ONLY ALL-CALL, SHORT P4POSITIONPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withan ATCRBS Mode Ainterrogation with short P4of adjustable position.Interrogate at thestandard rate.ATC-1400APRF: 0450SLS/ECHO: OFFXPDR MDE ATurn PRF thumbwheels to450 Hz. Turn SLS/ECHOswitch to OFF position.Turn the XPDR MODECNTL to the MODE Aposition.S-1403FUNC 3,(ACS,A)P4:CAL,Dv = 0Select FUNC 3 (ACS).Within the FUNC 3 menu,select ACS, A andP4:CAL.Adjust the position of theP4 pulse on S-1403 asshown in the table below.P4 Dv indicates theamount by which the P4position will move fromnominal. The % ATCRBSreply for each positionshall be as shown.ATC-1400ACW/NORM/OFF: NORMOn the S-1403, adjust theposition of the P4 pulse asshown in the table below.P4 Dv indicates theamount by which the P4position will move fromnominal. The % ATCRBSreply for each positionshall be as shown. (Readthe % reply display on theATC-1400A.)16.1 <10%>90%<10%<10%>90% P4 Dv 0µs+0.3 µs+0.05 µs-0.05 µs-0.3 µs P4 Dv 0µs+0.3 µs+0.05 µs-0.05 µs-0.3 µs<2%>98%<2%<2%>98%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 79SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION17 ATCRBS DIVERSITY ATCRBS DIVERSITYPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Simultaneouslyinterrogate both UUTantennas with anATCRBS Mode A atstandard rate.ATC-1400APRF: 0450S-1403FUNC 1ANT B: 0RF Lvl: 0Set PRF thumbwheels to0450 on ATC-1400A. InFUNC 1 menu on S-1403,turn on antenna B andensure RF level is set tozero.See paragraph 3.4. See paragraph 3.4.Use the following table toset the relative power andtiming of the twointerrogations. The %ATCRBS reply shall be atthe specified value andantenna.ATC-1400ACW/NORM/OFF: NORMUse the following table toset the relative power andtiming of the twointerrogations. The %ATCRBS reply shall be atthe specified value andantenna. Read the %reply on the ATC-1400A.17.1ANTA ANTB<10% N/A>90% N/A>90% N/A>90% N/A<10% N/A>90% N/A<10% N/A<10% N/AANT A ANT BRF LVL DELAY-56 dBm +0.05 µs-44 dBm +0.05 µs-44 dBm +0.45 µs-70 dBm +0.45 µs-56 dBm -0.05 µs-44 dBm -0.05 µs-56 dBm -0.45 µs-44 dBm -0.45 µsANT A ANT BRF LVL DELAY-56 dBm +0.05 µs-44 dBm +0.05 µs-44 dBm +0.45 µs-70 dBm +0.45 µs-56 dBm -0.05 µs-44 dBm -0.05 µs-56 dBm -0.45 µs-44 dBm -0.45 µsANTA ANTB<2% N/A>98% N/A>98% N/A>98% N/A<2% N/A>98% N/A<2% N/A<2% N/A
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 80SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION18 MODE S MTL, REPLYFORMAT, REPLYFREQUENCY, DELAY,POWER, ANDSQUITTERSMODE S MTL, REPLYFORMAT, REPLYFREQUENCY, DELAY,POWER, ANDSQUITTERSPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withMode S UF 5 interrogationat the standard rate.ATC-1400APRF: 0045Select 0045 on the PRFthumbwheels of theATC-1400A.S-1403FUNC 2ANT B: OFFSelect FUNC 2 (SEQ -MODE S ONLY) on theS-1403.Mode S MTL Mode S MTL18.1 N/A Set interrogation level to -70 dBm.ATC-1400ARF Lvl: -70Set the RF level on the1400A to -70 dBm.N/A18.2 DF = 05FS = 5DR = 00UM = 00ID = 7777ADD = 25252525Observe the Mode S replydata. Data shall be asspecified.ATC-1400ACW/NORM/OFF: NORMObserve the decodedMode S reply on theS-1403 sequence menu(S MENU) display. Datashall indicate as specified.DF = 05FS = 5DR = 00UM = 00ID = 7777ADD = 2525252518.3 -77 ± 3 dBm Slowly decrement theinterrogation level in 1-dBsteps until the % reply isless than 90%, thenincrement by 1 dB. Theinterrogation level shall beas specified. Record thevalue.Slowly decrement the RFLEVEL knob on theATC-1400A in 1-dB stepsuntil the % reply displayindicates less than 90%,then increment the RFlevel by 1 dB. The RFlevel shall indicate asspecified. Record thevalue.-77 ± 3 dBm
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 81SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONMode S ReplyFormatMode S ReplyFormat18.3.1 N/A Return the RF LEVELknob on the ATC-1400Ato -70 dBm.ATC-1400ARF Lvl: -70 dBmReturn the RF LEVELknob on the ATC-1400Ato -70 dBm.N/AInterrogate the UUT with aMode S UF 4interrogation.S-1403UF = 04Select UF#04 on theS-1403.18.3.2 DF = 04FS = 5DR = 00UM = 00AC = +20200ADD = 25252525Observe the decodedMode S reply data. Datashall be as specified.Verify the AC valueagrees with the codedaltitude measured inparagraph 11.6. (+20200= 7710 in Gilliam code)Observe the decodedMode S reply on theS-1403 sequence menu(S MENU) display. Datashall indicate as specified.Verify the AC valueagrees with the codedaltitude measured inparagraph 11.6. (+20200= 7710 in Gilliam code)DF = 04FS = 5DR = 00UM = 00AC = +20200ADD = 25252525Interrogate the UUT with aMode S UF 20interrogation.S-1403UF = 20Select UF#20 on theS-1403.18.3.3 DF = 04FS = 5DR = 00UM = 00AC = +20200ADD = 25252525Observe the decodedMode S reply data. Datashall be as specified.Observe the decodedMode S reply on theS-1403 sequence menu(S MENU) display. Datashall indicate as specified.DF = 04FS = 5DR = 00UM = 00AC = +20200ADD = 25252525Interrogate the UUT with aMode S UF 21interrogation.S-1403UF = 21Select UF#21 on theS-1403.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 82SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION18.3.4 DF = 05FS = 5DR = 00UM = 00ID = 7777ADD = 25252525Observe the decodedMode S reply data. Datashall be as specified.Verify that this ID agreeswith the ID data inparagraph 15.4.Observe the decodedMode S reply on theS-1403 sequence menu(S MENU) display. Datashall indicate as specified.Verify that this ID agreeswith the ID data inparagraph 15.4.DF = 05FS = 5DR = 00UM = 00ID = 7777ADD = 25252525Interrogate the UUT with aMode S UF 11interrogationS-1403UF =11ADD = 77777777Select UF#11 on theS-1403.Perform test setup inaccordance with tables 1and 5 except set AIR/GND1 to AIR. Restore tonormal position after thistest is completed.AIR/GND 1 toair or openPerform test setup inaccordance with tables 1and 5 except set AIR/GND1 to AIR. Restore tonormal position after thistest is completed.18.3.5 DF = 11AA = 25252525PI = 00000000CA = 1 for -902 1 for -903 1 for -904 0 for -905Observe the decodedMode S reply data. Datashall be as specified.Observe the decodedMode S reply on theS-1403 sequence menu(S MENU) display. Datashall indicate as specified.DF = 11AA = 25252525PI = 00000000CA = 1 for -902 1 for -903 1 for -904 0 for -905Mode S ReplyFrequencyMode S ReplyFrequency18.4 N/A This test measures ModeS reply frequency.This test measures ModeS reply frequency.N/A18.5 1090 ± 1 MHz Measure and record thereply frequency.Frequency shall be asspecified.ATC-1400ARF Lvl: -50Observe and record theXMTR FREQ display onthe ATC-1400A. Displayshall indicate as shown.1090 ± 1 MHzMode S Reply Delay Mode S Reply Delay18.6 N/A This test measures ModeS reply delay.This test measures ModeS reply delay.N/A
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 83SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION18.7 128 ±0.25 µsMeasure and record thereply delay. Delay shallbe as specified.Observe and record thereply field on the S-1403.Field shall indicate asspecified.128 ±0.25 µsMode S Reply Power Mode S Reply Power18.8 N/A This test measures ModeS reply power.This test measures ModeS reply power.N/A18.9 250 to 630WattsMeasure and record thepeak power of the firstpreamble pulse of theMode S reply. The powershall be as specified.S-1403CONTROLMENU 2,Pulse PowerGate: p1ATC-1400AF2/P2F1/P1: F2On the S-1403, changethe pulse power gate top1. Observe and recordthe XMTR PWR displayon the ATC-1400. Thedisplay shall indicate asspecified.280 to 550Watts18.10 250 to 630WattsMeasure and record thepeak power of the lastdata pulse of the Mode Sreply. The power shall bea specified.S-1403CONTROLMENU 2,Pulse PowerGate: P60ATC-1400AF2/P2F1/P1: F2On the S-1403, changethe pulse power gate toP60. Observe and recordthe XMTR PWR displayon the ATC-1400. Thedisplay shall indicate asspecified.280 to 550Watts18.11 <2 dB Calculate and record theabsolute value of thetransmitter droop (in dB),using the followingformula:Droop = ABS [10(Log10P1 - Log10 P2)], where P1and P2 are the powermeasurements taken intests 18.9 and 18.10,respectively. The droopshall not exceed thespecified limits.Calculate and record theabsolute value of thetransmitter droop (in dB),using the followingformula:Droop = ABS [10(Log10P1 - Log10 P2)], where P1and P2 are the powermeasurements taken intests 18.9 and 18.10,respectively. The droopshall not exceed thespecified limits.<2 dBSquitter Monitor Squitter Monitor18.12 N/A S1403FUNC 2ANT B: +.00On S-1403, enter FUNC 2and turn on ANT B.N/A
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 84SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION18.13 PASS Observe the squitterinterval over a period of10 seconds. The valueshall not exceed the limitsfrom 0.8 to 1.2 seconds.Observe the squitterinterval on the S-1403over a period of 10seconds. The value shallnot exceed the limits from0.8 to 1.2 seconds.PASSS-1403ANT B: OFF19 MODE S REPLY RATECAPABILITYMODE S REPLY RATECAPABILITYPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT with aUF 5 interrogation at arate of 177 per second.ATC-1400APRF: 0177S-1403FUNC 2On the ATC-1400A, adjustthe PRF thumbwheels to0177.On the S-1403, selectFUNC 2 (SEQ - MODE SONLY).Observe the followingreply characteristics. Thevalues shall be asspecified.ATC-1400ACW/NORM/OFF: NORMObserve the followingreply characteristics onthe ATC-1400A displays.The values shall be asspecified.19.1 PASS Over a period of 10seconds, the Mode S %reply shall not fall below90%.Over a period of 10seconds, the Mode S %reply shall not fall below98%.PASS19.2 PASS Reply Frequency1090 ± 1 MHzReply Frequency1090 ± 1 MHzPASS19.3 PASS Reply Power250 to 630 WattsReply Power280 to 550 WattsPASS
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 85SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION20 LONG MODE S LONG MODE SPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT with along Mode S interrogationat the standard rate.ATC-1400APRF: 0045SLS/ECHO: OFFTurn PFR thumbwheels to45 Hz, turn SLS/ECHOswitch to OFF position.S-1403FUNC 2,ANT B: OFFS-MENU:SO1;UF = 16RL = 1MU = 06000 0000000 0000001ADD = 2525 2525Select FUNC 2 and setthe S-MENU:SO1; UF = 16 RL = 1 MU = 06000000000 00000001 ADD = 2525252520.1 >90% Observe the % Mode Sreply. It shall not fallbelow 90%.ATC-1400ACW/NORM/OFF: NORMObserve the % Mode Sreply. It shall not fallbelow 98%.>98%20.2 With an oscilloscope, lookat both the suppressionpulse output and theMode S reply pulse traincoming from the UUT.With an oscilloscope lookat both the suppressionpulse output (Sup Pulseconnector on the Mode Sinterface panel) and theMode S reply transmitteroutput on the ATC-1400A.Use a 50-ohm impedanceon the transmitter and 1Mohm on the suppression.20.3 PASS Verify that thesuppression pulsebrackets the Mode Sreply.Verify that thesuppression pulsebrackets the Mode Sreply.PASS
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 86SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION20.4 500 ± 50 ns Measure and record the50-50% pulse width of theP1 pulse in the Mode Sreply. The measurementshall be as specified.Measure and record the50-50% pulse width of theP1 pulse in the Mode Sreply. The measurementshall be as specified.500 ± 40 ns21 ATCRBS/MODE S ALL-CALL, LONG P4AMPLITUDEATCRBS/MODE S ALL-CALL, LONG P4AMPLITUDEPerform test setup inaccordance with tables 1and 5 except set AIR/GND1 to AIR.AIR/GND 1 toair or openPerform test setup inaccordance with tables 1and 5 except set AIR/GND1 to AIR.Interrogate the UUT withan ATCRBS Mode Ainterrogation with long P4of adjustable amplitude.Interrogate at thestandard rate.ATC-1400APRF: 0045SLS/ECHO: OFFXPDR MDE AS-1403FUNC 4,(ACL)P4:VAR,Dv = CALTurn PRF thumbwheels to45 Hz. Turn SLS/ECHOswitch to OFF position.Turn the XPDR MODECONTROL to MODE A.Select FUNC 4 (ACL).Within the FUNC 4 menu,select ACL and P4:VAR.Use the following table toadjust the interrogationRF level and the amountof P4 attenuation. The %Mode S reply for eachcase shall be as specified.ATC-1400ACW/NORM/OFF: NORMUse the following table toadjust the interrogationRF level and the amountof P4 attenuation(SLS/ECHO thumbwheelson ATC-1400A). The %Mode S reply for eachcase shall be as specified.Read the value on theS-1403 Mode S % replyfield.21.1 <10%>90%>90%<10%<10%>90%RF Level P4-21 dBm -6-21 dBm -1-40 dBm -1-40 dBm -6-68 dBm -6-68 dBm -1RF Level P4-21 dBm -6-21 dBm -1-40 dBm -1-40 dBm -6-68 dBm -6-68 dBm -1<2%>98%>98%<2%<2%>98%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 87SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONReturn P4 to fullamplitude (0 attenuation).S-1403P4:CALReturn P4 to fullamplitude.22 MODE S SPR POSITIONTOLERANCEMODE S SPR POSITIONTOLERANCEPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT with aMode S UF 5 interrogationat the standard rate andpower.ATC-1400APRF 0045RF Lvl: -50On the ATC-1400A, adjustthe PRF thumbwheels to45 Hz.Use the following table tovary the position of theSPR. The resulting %Mode S reply shall be asshown.S-1403FUNC 2,SPR,Dv = asindicatedATC-1400ACW/NORM/OFF: NORMUse the following table tomove the SPR from itsnominal position. (Varythe SPR Dv field of theS-1403.) The resulting %Mode S reply shall be asshown. Read the % replyon the ATC-1400A.22.1 <10%>90%>90%<10%SPR Deviation+0.25 µs+0.05 µs-0.05 µs-0.25 µsSPR Deviation+0.25 µs+0.05 µs-0.05 µs-0.25 µs<2%>98%>98%<2%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 88SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION23 MODE S DIVERSITY MODE S DIVERSITYPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Simultaneouslyinterrogate both UUTantennas with a Mode SUF 5 interrogation atstandard rate.ATC-1400APRF: 0045S-1403FUNC 2,ANT B: 0RF Lvl: 0Set PRF thumbwheels to0045 on ATC-1400A. InFUNC 2 menu on S-1403,turn on antenna B andensure RF level is set tozero.See paragraph 3.4. See paragraph 3.4Use the following table toset the relative power andtiming of the twointerrogations. The %Mode S reply shall be atthe specified value andantenna.Use the following table toset the relative power andtiming of the twointerrogations. The %Mode S reply shall be atthe specified value andantenna. Read ANT A %reply on the ATC-1400A.Read ANT B % reply onthe S-1403.23.1ANTA ANTB<10% >90%>90% <10%>90% <10%>90% <10%<10% >90%>90% <10%<10% >90%<10% >90%ANT A ANT BRF LVL DELAY-56 dBm +0.05 µs-44 dBm +0.05 µs-44 dBm +0.45 µs-70 dBm +0.45 µs-56 dBm -0.05 µs-44 dBm -0.05 µs-56 dBm -0.45 µs-44 dBm -0.45 µsANT A ANT BRF LVL DELAY-56 dBm +0.05 µs-44 dBm +0.05 µs-44 dBm +0.45 µs-70 dBm +0.45 µs-56 dBm -0.05 µs-44 dBm -0.05 µs-56 dBm -0.45 µs-44 dBm -0.45 µsANTA ANTB<2% >98%>98% <2%>98% <2%>98% <2%<2% >98%>98% <2%<2% >98%<2% >98%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 89SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION24 TRANSACTION RESET TRANSACTION RESETPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT with aMode S UF 5 interrogationfollowed 75 µs later byATCRBS Mode Ainterrogation. The rate ofthis double interrogationshall be 45 Hz.ATC-1400ADBL INTER:OFF, 075.0XPDR MDE APRF: 0045On the ATC-1400A, adjustthe DBL INTERR/INTRFthumbwheels to 075.0 µsand OFF. Adjust the PRFthumbwheels to 0045.Turn the XPDR MODEknob to A.S-1403FUNC 6,1ST = SEQ2ND = ATCANT B: OFFOn the S-1403, selectFUNC 6 (DI). In thismenu, select 1ST = SEQand 2ND = ATC.24.1 ATCRBS:<10%Mode S:>90%Observe the % reply forboth Mode S andATCRBS replies. Thevalues shall be shown.ATC-1400ACW/NORM/OFF: NORMRead the % reply fields forboth Mode S andATCRBS on the S-1403display. The values shallindicate as shown.ATCRBS:<2%Mode S:>98%Change 1 bit of the ModeS interrogation address.S-1403S01: ADD = 152525In the sequence menu(S01) of the S-1403,change 1 bit in theinterrogation address(ADD = 152525).24.2 ATCRBS:>90%Mode S:<10%Observe the % reply forboth Mode S andATCRBS replies. Thevalues shall be as shown.S-1403FUNC 6Read the % reply fields forboth Mode S andATCRBS on the S-1403display. The values shallindicate as shown.ATCRBS:>98%Mode S:<2%Change 1 bit of the ModeS interrogation address.S-1403S01: ADD = 152521In the sequence menu(S01) of the S-1403,change 1 bit in theinterrogation address(ADD = 152521).24.3 ATCRBS:>90%Mode S:<10%Observe the % reply forboth Mode S andATCRBS replies. Thevalues shall be as shown.S-1403FUNC 6Read the % reply fields forboth Mode S andATCRBS on the S-1403display. The values shallindicate as shown.ATCRBS:>98%Mode S:<2%
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 90SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION25 SUPPRESSION BUS SUPPRESSION BUSPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate UUT with anATCRBS Mode Ainterrogation at thestandard rate and power.S-1403FUNC 1ATC-1400APRF: 0450XPDR MDE AOn the ATC-1400A, setthe PRF thumbwheels to0450 Hz and the XPDRMODE knob to A.With an oscilloscope, lookat both the suppressionpulse output and theATCRBS reply pulse traincoming from the UUT.ATC-1400ACW/NORM/OFF: NORMWith an oscilloscope, lookat both the suppressionpulse output (Sup Pulseconnector on the Mode Sinterface panel) and theATCRBS reply (Xmtroutput on theATC-1400A). Use a50-ohm impedance to lookat the Xmtr output and a1M ohm impedance forthe suppression pulse.25.1 PASS Verify that thesuppression pulsebrackets the ATCRBSreply.Verify that thesuppression pulsebrackets the ATCRBSreply.PASS25.2 >18 V<32 VMeasure and record theamplitude of thesuppression pulse. Theamplitude shall be asspecified.Measure and record theamplitude of thesuppression pulse. Theamplitude shall be asspecified.28 ± 3 V
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 91SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION26 REPLY PULSECHARACTERISTICSREPLY PULSECHARACTERISTICSPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Interrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate and power.ATC-1400APRF: 0450XPDR MDE AOn the ATC-1400A, setthe PRF thumbwheels to0450 Hz and the XPDRMODE knob to A.S-1403FUNC 1On the S-1403, enterFUNC 1.Using an oscilloscope with50-ohm impedance, lookat the XMTR output of theATC-1400A.26.1 Rise:<0.1 µsFall:<0.2 µsMeasure and record the10% to 90% rise and falltimes of the first framingpulse, F1. Themeasurements shall be asspecified.Measure and record the10% to 90% rise and falltimes of the first framingpulse, F1. Themeasurements shall be asspecified.Rise:<0.1 µsFall:<0.2 µs26.2 450 ± 100 ns Measure and record the50-50% pulse width of thefirst framing pulse, F1.The measurement shallbe as specified.Measure and record the50-50% pulse width of thefirst framing pulse, F1.The measurement shallbe as specified.450 ± 80 ns26.3 20.3 ±1 µsMeasure and record thespacing between the twoframing pulses, F1 andF2. The measurementsshall be as specified.Measure and record thespacing between the twoframing pulses, F1 andF2. The measurementsshall be as specified.20.3 ±1 µs
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 92SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION27 ANTENNA TEST ANTENNA TESTPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.Turn UUT off. Turn UUT off.Remove cable from TOPANT and terminate theTOP ANT port with anopen circuit (infinite ohm)terminator.Remove cable from TOPANT port on Mode Sinterface panel, andterminate the TOP ANTport with an open circuit(infinite ohm) terminator.Turn UUT on. Turn UUT on.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 93SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION27.1 ON Verify that TOP ANT andXPDR FAIL indicatorlamps are illuminatedwhen the TEST button ispushed momentarily forany version that is prior toa -905 MOD E.Press the TEST button onthe UUT. Verify that, onthe front panel of theMode S Transponder, theTOP ANT and XPDR FAILindicator lamps areilluminated when theTEST button is pushedmomentarily for anyversion that is prior to a-905 MOD E.ONVerify that TOP ANT FAILand XPDR PASS indicatorlamps are illuminatedwhen the TEST button ispushed momentarily for a-905 MOD E.Press the TEST button onthe UUT. Verify that, onthe front panel of theMode S Transponder, theTOP ANT FAIL and XPDRPASS indicator lamps areilluminated when theTEST button is pushedmomentarily for a -905MOD E.Turn UUT off. Turn UUT off.Replace the TOP ANTcable. Remove cablefrom the BOT ANT portand terminate the BOTANT port with an opencircuit (infinite ohm)terminator.On the Mode S inter-facepanel, replace the TOPANT cable. Removecable from the BOT ANTport and terminate theport with an open circuit(infinite ohm) terminator.Turn UUT on. Turn UUT on.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 94SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION27.2 ON Verify that the BOT ANTand XPDR FAIL indicatorlamps are illuminatedwhen the TEST button ispushed momentarily forany version that is prior toa -905 MOD E.Press the TEST button onthe UUT. Verify that, onthe front panel of theMode S Transponder, theBOT ANT and XPDR FAILindicator lamps areilluminated when theTEST button is pushedmomentarily for anyversion that is prior to a-905 MOD E.ONVerify that BOT ANT FAILand XPDR PASS indicatorlamps are illuminatedwhen the TEST button ispushed momentairly for a-905 MOD E.Press the TEST button onthe UUT. Verify that, onthe front panel of theMode S Transponder, theBOT ANT FAIL and XPDRPASS indicator lamps areilluminated when theTEST button is pushedmomentarily for a -905MOD E.Turn off UUT. Turn off UUT.Replace cable on BOTANT port.On the Mode S interfacepanel, replace BOT ANTcable.28 SYSTEM STATUS SYSTEM STATUSPerform test setup inaccordance with tables 1and 5.Perform test setup inaccordance with tables 1and 5.With Mode S softwarerunning, press the TESTbutton on the front panelof the UUT.INTFC PNLAIR/GND 1: GROUNDAIR/GND 2: GROUNDWith Mode S softwarerunning, press the TESTbutton on the front panelof the UUT.Observe the front panelLEDs. They should allilluminate briefly (lamptest), then display asspecified.Observe the front panelLEDs. They should allilluminate briefly (lamptest), then display asspecified.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTS 95SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATION28.1 onoffoffoffoffoffSignal NameXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGSignal NameXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGonoffoffoffoffoff28.2 Perform test 3 to clear anyfailures logged in E2.END OF TEST END OF TEST
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTSA-0SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAPPENDIX AALTERNATIVE TEST PROCEDURE FOR PC EMULATION SYSTEM
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTSA-1SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONAPPENDIX AALTERNATIVE TEST PROCEDURE FOR PC EMULATION SYSTEMA1. Notes on operation of the PC emulation system are as follows:A1.1 All tests requiring the PC emulation system shall be performed while executing the SDP-185monitor software. In the engineering environment, the monitor is invoked by executing the 'SCPMDS' command file.A1.2 All address and data information should be entered in Hex with a leading # for CACHE locationsand a leading 1# for local memory. See example in 3.4.3.A1.3 Most emulation commands are invoked by pressing the softkeys. Only addresses, data, and 'MDS'are typed using the standard typewriter keys. For example, to change the contents of location C000(Hex) to the value AAAA (Hex), the following PC command would be entered:modify memory MDS word 0/#C0/0/0/ to AAAAIn this example, the words (modify, memory, word, and to) are entered with single-keystrokesoftkeys.A2. Notes and a list of PC command files (Honeywell Part No. MT4061400-101, revision a) are as follows:A2.1 The total execution time of this Integrated Test Procedure may be greatly reduced by using the PCcommand files listed in paragraph 3.11.3. These command files automatically execute manykeystrokes found in certain tests and match statement-for-statement (excluding 'pause' statements)the steps found in the IT work steps.A2.2 After executing the 'SCP MDS' batch file (see paragraph 3.4), execute the command file by typingthe filename (using all caps) into the PC and pressing ENTER. Most command files pause to allowthe operator to record data. Press any key to resume command file execution.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REVLTRAW/CRITICAL NOTATIONSUPPLEMENTSA-2SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA2.3 IT Test No. PC Command Filename1IT102IT203 IT30 (See note 1.)4IT405IT506IT607 IT70 (Shall be executed twice to complete test 7.)8IT808.1 IT819IT9010 IT100 (See note 2.)NOTE 1: Before running IT30, test A3 must be performed. IT30 must also be performedat the completion of the IT to clear E2.NOTE 2: Before running IT100, end out of emulation mode by entering "END" into the PC.(Resume testing at test 10.13.)
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-3SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONALTERNATIVE TESTPROCEDURESALTERNATIVE TESTPROCEDURESA1 SOFTWARE LOAD SOFTWARE LOADRun the SCP MDSprogram (refer toparagraph 3.4.1).Run the SCP MDSprogram (refer toparagraph 3.4.1).A1.1 7FDE:580D7FDF:EEE0Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -902.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -902.7FDE:580D7FDF:EEE0A1.2 7FDE:718F7FDF:3150Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -903.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -903.7FDE:718F7FDF:3150A1.3 7FDE:0E2D7FDF:F202Observe the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -904.Enter "display memory07FDEH thru 07FDFH"The values shall be aspecified for a -904.7FDE:0E2D7FDF:F202A1.4 7FDE:43537FDF:F5DFObserve the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -905not MOD E.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -905 notMOD E.7FDE:43537FDF:F5DFA1.5 7FDE:6C8B7FDF:BA1DObserve the CRC wordsin program ROM (memorylocations 7FDEH and7FDFH). The values shallbe as specified for a -905MOD E.Enter "display memory07FDEH thru 07FDFH"The values shall be asspecified for a -905 MODE.7FDE:6C8B7FDF:BA1D
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-4SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA2 CACHE RAM CACHE RAMModify register CACHE to0.If this IT is beingperformed using anautomated test facility,complete test 2.1.If this IT is beingperformed using anautomated test facility,complete test 2.1.If this IT is beingperformed using themanual test fixture,complete test 2.2.If this IT is beingperformed using themanual test fixture,complete test 2.2.A2.1 N/A Automated Procedure Automated Procedure N/AWrite the cache RAMaddress (0000H thru3FFFH) to each locationin cache RAM (20000Hthru 23FFFH).Write the cache RAMaddress (0000H thru3FFFH) to each locationin cache RAM (20000Hthru 23FFFH).A2.1 .10000H thru3FFFHVerify that each cacheRAM location contains thecorrect data.Verify that each cacheRAM location contains thecorrect data.0000H thru3FFFHWrite the complement ofeach cache RAM address(FFFFH thru C000H) toeach loca-tion in cacheRAM (20000H thru23FFFH).Write the complement ofeach cache RAM address(FFFFH thru C000H) toeach loca-tion in cacheRAM (20000H thru23FFFH).A2.1 .2FFFFH thruC000HVerify that each cacheRAM location contains thecorrect data.Verify that each cacheRAM location contains thecorrect data.FFFFH thruC000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-5SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA2.2 N/A Manual Test Procedure Manual Test Procedure N/AH Modify memory 20000Hthru 23FFFH to 0AAAAH.Enter "modify memoryMDS word 0#20000 thru0#23FFF to AAAA"A2.2 .1AAAAH Display memory 20000Hthru 2007FH.Enter "display memoryMDS word from 0#20000to 0#23FFF"AAAAHH Modify memory 20000Hthru 23FFFH to 5555H.Enter "modify memoryMDS word 0#20000 thru0#23FFF to 5555"A2.2 .25555H Display memory 20000Hthru 2007FH.Enter "display memoryMDS word from 0#20000to 0#2007F"5555HA2.2 .35555H Display memory 23E80Hthru 23FFFH.Enter "display memoryMDS word from 0#23E80to 0#23FFF"5555HA3 N/A EEPROM EEPROM N/AWrite LRU dash andserial numbers to theEEPROM locations9FCOH to 9FCAHrespectively. D/N standsfor dash number and S/Nstands for serial number.Enter "modify memoryMDS word 0#20000(1st digit of D/N),(2nd digit of D/N),(3rd digit of D/N),(1st digit of S/N),(2nd digit of S/N),(3rd digit of S/N),(4th digit of S/N),(5th digit of S/N),(6th digit of S/N),(7th digit of S/N),(8th digit of S/N)."HD/N stands for dashnumber and S/N for serialnumber. (Digit spacecomma space)Example: for unit withdash number 905 andserial number 90100257,enter modify memoryMDS word 0#20000 9 , 0 ,5 , 9 , 0 , 1 , 0 , 0 , 2 , 5 ,7
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-6SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA3.1 N/A Enter "SCP MDS" N/AEnter "load verify MDSIT30P.RA"Enter "modify registersMDS E0 80E"HEnter "modify registersMDS P 109"Enter "Set discretes MDSto 1FA"Enter "run MDS"NOTE: EEPROM is only8 bits wide, instead of 16.If 16 bits of data arespecified, only the leastsignificant 8 bits are used.Thus, FE34H is the sameas 34H.Program will take severalminutes to complete.Front panel LEDs shallflash in a repetitivepattern while the programis executing. When theprogram is complete allsix LEDs shall beilluminated.Write the EEPROMaddress (OOH thru FFH)to each location inEEPROM (8OOOH thru9FFFH). Verify eachlocation.Write the complement ofeach EEPROM address(FFH thru OOH) to eachlocation in EEPROM(8OOOH thru 9FFFH).Verify each location.Write the value FFH toeach location in EEPROM(8OOOH thru 9FFFH).Verify each location.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-7SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONWrite the LRU dash andserial numbers, in ISO-5format, to the EEPROMlocations 9FCOH to9FCAH.A3.2 50415353Enter "display memoryMDS word from 0#20010to 0#20011"The memory locationsshall be as indicated.50415353A3.3 PASS Verify that each 8-bit wordin locations 9FCOH thru9FCAH contains theproper dash and serialnumbers.Enter "display memoryMDS word from 1#9FC0to 1#9FCA"Verify that the 8 bits foreach word are as follows:- Lower 4 bits from the serial number and dash number of the UUT.- Upper 4 bits contain a 3 Hex.PASSEnter "END"Enter "SCP MDS"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-8SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA4 VIDEO RAM VIDEO RAMWrite the video RAMaddress (C000H thruC00FH) to each locationin video RAM (C000H thruC00FH).Enter "modify memoryMDS word 1#C0000C000, 0C001, 0C002,0C003"Enter "modify memoryMDS word 1#C00040C004, 0C005, 0C006,0C007"Enter "modify memoryMDS word 1#C00B0C008, 0C009, 0C00A,0C00B"Enter "modify memoryMDS word 1#C00C0C00C, 0C00D, 0C00E,0C00F"Enter "display memoryMDS word from 1#C000to 1#C00FA4.1 C000H thruC00FHVerify that each videoRAM location contains thecorrect data.Verify that each videoRAM location contains thecorrect data.C000H thruC00FHWrite the complement ofeach video RAM address(3FFFH thru 3FF0H) toeach location in videoRAM (C000H thruC00FH).Enter "modify memoryMDS word 1#C000 3FFF,3FFE, 3FFD, 3FFC"Enter "modify memoryMDS word 1#C004 3FFB,3FFA, 3FF9, 3FF8"Enter "modify memoryMDS word 1#C008 3FF7,3FF6, 3FF5, 3FF4"Enter "modify memoryMDS word 1#C00C 3FF3,3FF2, 3FF1, 3FF0"Enter "display memoryMDS word from 1#C000to 1#C00F"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-9SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA4.2 3FFFH thru3FF0HVerify that each videoRAM location contains thecorrect data.Verify that each videoRAM location contains thecorrect data.3FFFH thru3FF0HA5 INPUT DISCRETES INPUT DISCRETESPerform test setup inaccordance with table 2.Perform test setup for thetransponder interfacepanel in accordance withtable 2.Read the followingmemory locations:Enter "display memoryMDS word from 1#D600to 1#D605"The memory locationsshall indicate as follows:(X = don't care)A5.1 X355H orXB55HX4AAH orXCAAH5555H55XXH6AXXHXABFH,bit 12 = 00D600H0D601H0D602H0D603H0D604H0D605H0D600H0D601H0D602H0D603H0D604H0D605HX355H orXB55HX4AAH orXCAAH5555H55XXH6AXXHXABFH,bit 12 = 0Complement all of thediscrete input stimuli tothe UUT.Mode SInterfacePanelTable 3Complement all of thediscrete input stimuli tothe UUT by performingtest setup in accordancewith table 3.Enter "display memoryMDS word from 1#D600to 1#D605"Read the followingmemory locations:The memory locationsshall indicate as follows:(X = don't care)
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-10SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA5.2 X4AAH orXCAAHX355H orXB55HAAAAHAAXXH95XXHX744H,bit 12 = 10D600H0D601H0D602H0D603H0D604H0D605HOD600H0D601H0D602H0D603H0D604H0D605HX4AAH orXCAAHX355H orXB55HAAAAHAAXXH95XXHX744H,bit 12 = 1A5.3 X5XXH While pressing the PushTo Test button on thefront panel of the UUT,read memory locationD605H. The value shallbe as indicated.(X = don't care)While pressing the PushTo Test button on thefront panel of the UUT,enter "display memoryMDS word from 1#D605to 1#D605"The value shall be asindicated.(X = don't care)X5XXHA6 OUTPUT DISCRETES OUTPUT DISCRETESPerform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.Write to Output DataWord 0 and ConfigurationRegister 3 as shown:Write to Output DataWord 0 and ConfigurationRegister 3 as shown:(Enter "modify memoryMDS word <address><data>")Address Data0D607H 0012H0D400H 2A00HAddress Data1#D607 00121#D400 2A00Verify the state of thefollowing UUT front panelLEDs:Verify the state of thefollowing UUT front panelLEDs:Signal Name Signal NameA6.1 onoffoffonoffonXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGonoffoffonoffon
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-11SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONVerify the followingsignals. The signal senseshall be as specified.Verify the followingsignals. The indicatorlamps on the Mode Sinterface panel (or thesignals themselves) shallbe as specified.Sig/Lamp Sig/Lamp Sig/Lamp Sig/LampA6.2 OPN/ON (Green)GND/OFFOPN/OFFGND/ON (Green)ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2OPN/ON (Green)GND/OFFOPN/OFFGND/ON (Green)Write to Output DataWord 0 and ConfigurationRegister 3 as shown:Write to Output DataWord 0 and ConfigurationRegister 3 as shown:(Enter "modify memoryMDS word <address><data>")Address Data0D607H 0001H0D400H 1500HAddress Data1#D607 00011#D400 1500Verify the state of thefollowing UUT front panelLEDs:Verify the state of thefollowing UUT front panelLEDs:Signal Name Signal Name
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-12SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA6.3 offononoffonoffXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGXPDRPASSXPDRFAILCNTLPNLTOPANTBOTANTALTSIGoffononoffonoffVerify the followingsignals. The signal senseshall be as specified.Verify the followingsignals. The indicatorlamps on the Mode Sinterface panel (or thesignals themselves) shallbe as specified.Sig/Lamp Signal Name Signal Name Sig/LampA6.4 GND/OFFOPN/ON(Red)+5V/ON(Red)OPN/OFFALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2ALT FAIL 1ALT FAIL 2XPDR FAIL 1XPDR FAIL 2GND/OFFOPN/ON(Red)+5V/ON(Red)OPN/OFFA7 SYNCHRO ALTITUDE SYNCHRO ALTITUDEPerform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.Stimulate the UUTSYNCHRO REF H andSYNCHRO REF C signalswith a 26 V ac, 400 Hzsinusoidal waveform.Stimulate the UUTsynchro altitude inputswith a second 400 Hzsinusoid that issynchronous with thereference signal (above).Apply this signal acrossthe followng UUT synchroinputs with the negativeside of the signalconnected to the Z input:Mode SInterfacePanel26 VAC POL= +On the Mode S InterfacePanel, connect the 26 Vac REF + and – signals tothe Sync Alt 1/2 RH andRC signals. Connect theTEST VAC + signal to theFX, FY, CX, and CYsignals. Connect theTEST VAC – signal to theFZ and CZ signals.Adjust the amplitude ofthe TEST VAC signal to 9V rms.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-13SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONSYNC ALT 1 FINE X-ZSYNC ALT 1 FINE Y-ZSYNC ALT 1 CRSE X-ZSYNC ALT 1 CRSE Y-ZSYNC ALT 2 FINE X-ZSYNC ALT 2 FINE Y-ZSYNC ALT 2 CRSE X-ZSYNC ALT 2 CRSE Y-Z1. Adjust the amplitude of this signal to 9 V rms.Read the digital value foreach synchro source,using the followingprocedure:Read the digital value foreach synchro source,using the followingprocedure:1. Write the appropriate data (see following table) to memory location D607H.2. Wait at least 75 µs.3. Read location D606H.4. Record the value.1. Write the appropriate data (see following table) to memory location D607H.2. Enter "modify memory MDS word 1#D607 <value from table>"3. Enter "display memory MDS word from 1#D606 to 1#D606"4. Record the value.The data should fall withinthe range shown in theLimits.The data should fall withinthe range shown in theLimits.Write SourceTo BeingD607H TestedWrite SourceTo BeingD607H Tested
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-14SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA7.1CD5 ± 6FHOHCD5 ± 6FH1HCD5 ± 6FH2HCD5 ± 6FH3HCD5 ± 6FH4HCD5 ± 6FH5HCD5 ± 6FH6HCD5 ± 6FH7H0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01AOH ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01COH ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01EOH ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)0100 ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120 ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140 ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160 ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180 ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01AO ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01CO ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01EO ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)CD5 ± 6FHOHCD5 ± 6FH1HCD5 ± 6FH2HCD5 ± 6FH3HCD5 ± 6FH4HCD5 ± 6FH5HCD5 ± 6FH6HCD5 ± 6FH7HReverse the phase 180degrees on theSYNCHRO REFERENCEinput to the UUT.Mode SInterfacePanel26 VAC POL= -Reverse the phase 180degrees on theSYNCHRO REFERENCEinput to the UUT.Read the digital value foreach synchro source,using the followingprocedure:Read the digital value foreach synchro source,using the followingprocedure:1. Write the appropriate data (see following table) to memory location D607H.2. Wait at least 75 µs.3. Read location D606H.4. Record the value.1. Write the appropriate data (see following table) to memory location D607H.2. Enter "modify memory MDS word 1#D607 <value from table>"3. Enter "display memory MDS word from 1#D606 to 1#D606"4. Record the value.
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-15SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONThe data should fall withinthe range shown in theLimits.The data should fall withinthe range shown in theLimits.Write SourceTo BeingD607H TestedWrite SourceTo BeingD607H TestedA7.2329 ± 6FHOH329 ± 6FH1H329 ± 6FH2H329 ± 6FH3H329 ± 6FH4H329 ± 6FH5H329 ± 6FH6H329 ± 6FH7H0100H ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120H ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140H ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160H ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180H ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01AOH ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01COH ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01EOH ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)0100 ALT 1 FIN X-Z (upper 12 bits) (lower 4 bits)0120 ALT 1 FIN Y-Z (upper 12 bits) (lower 4 bits)0140 ALT 1 CRS X-Z (upper 12 bits) (lower 4 bits)0160 ALT 1 CRS Y-Z (upper 12 bits) (lower 4 bits)0180 ALT 2 FIN X-Z (upper 12 bits) (lower 4 bits)01AO ALT 2 FIN Y-Z (upper 12 bits) (lower 4 bits)01CO ALT 2 CRS X-Z (upper 12 bits) (lower 4 bits)01EO ALT 2 CRS Y-Z (upper 12 bits) (lower 4 bits)329 ± 6FHOH329 ± 6FH1H329 ± 6FH2H329 ± 6FH3H329 ± 6FH4H329 ± 6FH5H329 ± 6FH6H329 ± 6FH7H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-16SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8 429 RECEIVER TESTS(INTERNAL)429 RECEIVER TESTS(INTERNAL)Internal wrap on receiver0 thru 7.Perform test setup inaccordance with table 2.Perform test setup inaccordance with table 2.(Accept AAH label with nomasking)(Accept AAH label with nomasking)A8.1 N/A Perform initial setup inaccordance with table 6.Perform initial setup inaccordance with table 6.N/AModify Memory:Address DataOD210H AAAAHOD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Read the following blockof memory: D200H thruD20FH.Enter "display memoryMDS word from 1#D200to 1#D20F"A8.2 AAAAH2AAAHEven locationsOdd locationsEven locationsOdd locationsAAAAH2AAAH(Reject even parity data,no label qualification)(Reject even parity data,no label qualification)A8.3 N/A Perform initial setup pertable 6 except:Address DataD21CH 0249HD220H - D22EH 0044HPerform initial setup pertable 6 except:Address Data1#D21C 02491#D220 - 1#D22E 0044N/AModify Memory:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Read the following blockof memory: D200H thruD20FH.Enter "display memoryMDS word from 1#D200to 1#D20F"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-17SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.4 AAAAH2AAAHEven locationsOdd locations(Reject nonmatchinglabels)Even locationsOdd locations(Reject nonmatchinglabels)AAAAH2AAAH(no changefrom test 8.2)A8.5 N/A Perform initial setup inaccordance with table 6except:Address DataD220H - D22EH EF44HPerform initial setup inaccordance with table 6except:Address Data1#D220 - 1#D22E EF44N/AModify Memory:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D210 to 5555"Read the following blockof memory: D200H thruD20FH.Enter "display memoryMDS word from 1#D200to 1#D20F"A8.6 AAAAH2AAAH(no changefrom test 8.2)Even locationsOdd locations(Reject due to disablefeature)Even locationsOdd locations(Reject due to disablefeature)AAAAH2AAAH(no changefrom test 8.2)A8.7 N/A Perform initial setup inaccordance with table 6except:Address DataD218H 0000HD21AH 0000HD220H - D22EH EE44HPerform initial setup inaccordance with table 6except:Address Data1#D218 00001#D21A 00001#D220 - 1#D22E EE44N/AModify Memory:Address DataD210H 5555HD211H 5555HRead the following blockof memory: D200H thruD20FH.Enter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D200to 1#D20F"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-18SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.8 AAAAH2AAAH(no change)Even locationsOdd locationsEven locationsOdd locationsAAAAH2AAAH(no change)(Accept valid data andlabel)(Accept valid data andlabel)A8.9 N/A Perform initial setup inaccordance with table 6except:Address DataD220H - D22EH EE44HPerform initial setup inaccordance with table 6except:Address Data1#D220 - 1#D22E EE44N/AModify Memory:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Read the following blockof memory: D200H thruD20FH.Enter "display memoryMDS word from 1#D200to 1#D20F"A8.10 5555HD555HEven locationsOdd locationsEven locationsOdd locations5555HD555HA8.11 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 8000H0D211H 0000HEnter "modify memoryMDS word 1#D210H to8000H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.12 8000H0000HEven locationsOdd locationsEven locationsOdd locations8000H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-19SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.13 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify MemoryAddress Data0D210H 4000H0D211H 0000HEnter "modify memoryMDS word 1#D210H to4000H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.14 4000H0000HEven locationsOdd locationsEven locationsOdd locations4000H0000HA8.15 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 2000H0D211H 0000HEnter "modify memoryMDS word 1#D210H to2000H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.16 2000H0000HEven locationsOdd locationsEven locationsOdd locations2000H0000HA8.17 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify memory:Address Data0D210H 1000H0D211H 0000HEnter "modify memoryMDS word 1#D210H to1000H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.18 1000H0000HEven locationsOdd locationsEven locationsOdd locations1000H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-20SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.19 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0800H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0800H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.20 0800H0000HEven locationsOdd locationsEven locationsOdd locations0800H0000HA8.21 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0400H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0400H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.22 0400H0000HEven locationsOdd locationsEven locationsOdd locations0400H0000HA8.23 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0200H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0200H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FHA8.24 0200H0000HEven locationsOdd locationsEven locationsOdd locations0200H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-21SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.25 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0100H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0100H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.26 0100H0000HEven locationsOdd locationsEven locationsOdd locations0100H0000HA8.27 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0080H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0080H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.28 0080H0000HEven locationsOdd locationsEven locationsOdd locations0080H0000HA8.29 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0040H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0040H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.30 0040H0000HEven locationsOdd locationsEven locationsOdd locations0040H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-22SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.31 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0020H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0020H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.32 0020H0000HEven locationsOdd locationsEven locationsOdd locations0020H0000HA8.33 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0010H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0010H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.34 0010H0000HEven locationsOdd locationsEven locationsOdd locations0010H0000H
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-23SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.35 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0008H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0008H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.36 0008H0000HEven locationsOdd locationsEven locationsOdd locations0008H0000HA8.37 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0004H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0004H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.38 0004H0000HEven locationsOdd locationsEven locationsOdd locations0004H0000HA8.39 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0002H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0002H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-24SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.40 0002H0000HEven locationsOdd locationsEven locationsOdd locations0002H0000HA8.41 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0001H0D211H 0000HEnter "modify memoryMDS word 1#D210H to0001H"Enter "modify memoryMDS word 1#D211H to0000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.42 0001H0000HEven locationsOdd locationsEven locationsOdd locations0001H0000HA8.43 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 8000HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to8000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.44 0000H8000HEven locationsOdd locationsEven locationsOdd locations0000H8000HA8.45 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 4000HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to4000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-25SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.46 0000H4000HEven locationsOdd locationsEven locationsOdd locations0000H4000HA8.47 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 2000HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to2000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.48 0000H2000HEven locationsOdd locationsEven locationsOdd locations0000H2000HA8.49 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 1000HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to1000H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.50 0000H1000HEven locationsOdd locationsEven locationsOdd locations0000H1000HA8.51 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0800HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0800H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-26SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.52 0000H0800HEven locationsOdd locationsEven locationsOdd locations0000H0800HA8.53 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0400HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0400H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.54 0000H0400HEven locationsOdd locationsEven locationsOdd locations0000H0400HA8.55 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0200HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0200H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.56 0000H0020HEven locationsOdd locationsEven locationsOdd locations0000H0200HA8.57 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0100HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0100H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-27SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.58 0000H0100HEven locationsOdd locationsEven locationsOdd locations0000H0100HA8.59 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0080HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0080H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.60 0000H0080HEven locationsOdd locationsEven locationsOdd locations0000H0080HA8.61 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0040HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0040H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.62 0000H0040HEven locationsOdd locationsEven locationsOdd locations0000H0040HA8.63 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0020HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0020H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-28SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.64 0000H0020HEven locationsOdd locationsEven locationsOdd locations0000H0020HA8.65 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0010HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0010H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.66 0000H0010HEven locationsOdd locationsEven locationsOdd locations0000H0010HA8.67 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0008HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0008H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.68 0000H0008HEven locationsOdd locationsEven locationsOdd locations0000H0008HA8.69 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0004HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0004H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-29SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA8.70 0000H0004HEven locationsOdd locationsEven locationsOdd locations0000H0004HA8.71 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0002HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0002H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.72 0000H0002HEven locationsOdd locationsEven locationsOdd locations0000H0002HA8.73 N/A Perform initial setup inaccordance with table 6.1.Perform initial setup inaccordance with table 6.1.N/AModify Memory:Address Data0D210H 0000H0D211H 0001HEnter "modify memoryMDS word 1#D210H to0000H"Enter "modify memoryMDS word 1#D211H to0001H"Read the following blockof memory: 0D200H thru0D20FH.Enter "display memoryMDS word from 1#D200Hthru 1#D20FH"A8.74 0000H0001HEven locationsOdd locationsEven locationsOdd locations0000H0001HA9 429 RECEIVER/TRANSMITTER TESTS(EXTERNAL)429 RECEIVER/TRANSMITTER TESTS(EXTERNAL)Perform test setup inaccordance with tables 2and 8.Perform test setup inaccordance with tables 2and 8.Xmtr 0/Rcvr 0 Xmtr 0/Rcvr 0
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-30SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.1 N/A (MAINT DATA OUT/AIRDATA 1)(MAINT DATA OUT/AIRDATA 1)N/AConnect Xmtr 0 (MaintData Out) to Rcvr 0 (429Air Data 1).Perform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD220H FFAAHEnter "modify memoryMDS word 1#0D220FFAA"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D200to 1#D201"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-31SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.2 AAAAH2AAAHD200HD201HD200HD201HAAAAH2AAAHOn Mode S interfacepanel, removeconnections on 429 ADC#1 and reconnect on 575ADC #1.On Mode S interfacepanel, removeconnections on 429 ADC#1 and reconnect on 575ADC #1.Modify receiver label:Address DataD220H FF55HEnter "modify memoryMDS word 1#0D220FF55"Modify transmitter data:Address Data D210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D200to 1#D201"Data should read asfollows:Data should read asfollows:Address AddressA9.3 5555HD555HD200HD201HD200HD201H5555HD555HXmtr 0/Rcvr 1 Xmtr 0/Rcvr 1
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-32SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.4 N/A (MAINT DATA OUT/AIRDATA 2)(MAINT DATA OUT/AIRDATA 2)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD222H FFAAHEnter "modify memoryMDS word 1#0D222FFAAH"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D202to 1#D203"Data should read asfollows:Data should read asfollows:Address AddressA9.5 AAAAH2AAAHD202HD203HD202HD203HAAAAH2AAAHOn Mode S interfacepanel, removeconnections on 429 ADC#2 and reconnect on 575ADC #2.On Mode S interfacepanel, removeconnections on 429 ADC#2 and reconnect on 575ADC #2.Modify receiver label:Address DataD222H FF55HEnter "modify memoryMDS word 1#0D222FF55H"Modify transmitter data:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D202to 1#D203"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-33SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.6 5555HD555HD202HD203HD202HD203H5555HD555HXmtr 0/Rcvr 2 Xmtr 0/Rcvr 2A9.7 N/A (MAINT DATA OUT/CNTLDATA B)(MAINT DATA OUT/CNTLDATA B)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD224H FFAAHEnter "modify memoryMDS word 1#0D224FFAAH"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D204to 1#D205"Data should read asfollows:Data should read asfollows:Address AddressA9.8 AAAAH2AAAHD204HD205HD204HD205HAAAAH2AAAHModify receiver label:Address DataD224H FF55HEnter "modify memoryMDS word 1#0D224FF55H"Modify transmitter data:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D201 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D204to 1#D205"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-34SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.9 5555HD555HD204HD205HD204HD205H5555HD555HXmtr 0/Rcvr 3 Xmtr 0/Rcvr 3A9.10 N/A (MAINT DATAOUT/MAINT DATA IN)(MAINT DATAOUT/MAINT DATA IN)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD226H FFAAHEnter "modify memoryMDS word 1#0D226FFAA"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D206to 1#D207"Data should read asfollows:Data should read asfollows:Address AddressA9.11 AAAAH2AAAHD206HD207HD206HD207HAAAAH2AAAHModify receiver label:Address DataD226H FF55HEnter "modify memoryMDS word 1#0D226FF55"Modify transmitter data:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D206to 1#D207"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-35SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.12 5555HD555HD206HD207HD206HD207H5555HD555HXmtr 0/Rcvr 6 Xmtr 0/Rcvr 6A9.13 N/A (MAINT DATAOUT/FLIGHT ID)(MAINT DATAOUT/FLIGHT ID)N/APerform setup inaccordance with table 7.Perform setup inaccordance with table 7.Modify receiver label:Address DataD22CH FFAAHEnter "modify memoryMDS word 1#0D22CFFAA"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D20Cto 1#D20D"Data should read asfollows:Data should read asfollows:Address AddressA9.14 AAAAH2AAAHD20CHD20DHD20CHD20DHAAAAH2AAAHModify receiver label:Address DataD22CH FF55HEnter "modify memoryMDS word 1#0D22CFF55"Modify transmitter data:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word from 1#D20Cto 1#D20D"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-36SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.15 5555HD555HD20CHD20DHD20CHD20DH5555HD555HXmtr 0/Rcvr 7 Xmtr 0/Rcvr 7A9.16 N/A (MAINT DATA OUT/CNTLDATA A)(MAINT DATA OUT/CNTLDATA A)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD22EH FFAAHEnter "modify memoryMDS word 1#0D22EFFAA"Modify transmitter data:Address DataD210H AAAAHD211H AAAAHEnter "modify memoryMDS word 1#D210 thru1#D211 to AAAA"Enter "display memoryMDS word from 1#D20Eto 1#D20F"Data should read asfollows:Data should read asfollows:Address AddressA9.17 AAAAH2AAAHD20EHD20FHD20EHD20FHAAAAH2AAAHModify receiver label:Address DataD22EH FF55HEnter "modify memoryMDS word 1#0D22EFF55"Modify transmitter data:Address DataD210H 5555HD211H 5555HEnter "modify memoryMDS word 1#D210 thru1#D211 to 5555"Enter "display memoryMDS word 1#D20E to1#D20F"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-37SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.18 5555HD555HD20EHD20FHD20EHD20FH5555HD555HXmtr 1/Rcvr 4 Xmtr 1/Rcvr 4A9.19 N/A (XT COORD/TX COORD) (XT COORD/TX COORD) N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD228H FFAAHEnter "modify memoryMDS word 1#0D228FFAA"Modify transmitter data:Address DataD212H AAAAHD213H AAAAHEnter "modify memoryMDS word 1#D212 thru1#D213 to AAAA"Enter "display memoryMDS word from 1#D208to 1#D209"Data should read asfollows:Data should read asfollows:Address AddressA9.20 AAAAH2AAAHD208HD209HD208HD209HAAAAH2AAAHModify receiver label:Address DataD228H FF55HEnter "modify memoryMDS word 1#0D228FF55"Modify transmitter data:Address DataD212H 5555HD213H 5555HEnter "modify memoryMDS word 1#D212 thru1#D213 to 5555"Enter "display memoryMDS word from 1#D208to 1#D209"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-38SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.21 5555HD555HD208HD209HD208HD209H5555HD555HXmtr 2/Rcvr 5 Xmtr 2/Rcvr 5A9.22 N/A (DATA LINK OUT/DATALINK IN)(DATA LINK OUT/DATALINK IN)N/APerform initial setup inaccordance with table 7.Perform initial setup inaccordance with table 7.Modify receiver label:Address DataD22AH FFAAHEnter "modify memoryMDS word 1#0D22AFFAA"Modify transmitter data:Address DataD214H AAAAHD215H AAAAHEnter "modify memoryMDS word 1#D214 thru1#D215 to AAAA"Enter "display memoryMDS word from 1#D20Ato 1#D20B"Data should read asfollows:Data should read asfollows:Address AddressA9.23 AAAAH2AAAHD20AHD20BHD20AHD20BHAAAAH2AAAHModify receiver label:Address DataD22AH FF55HEnter "modify memoryMDS from 1#0D22AFF55"Modify transmitter data:Address DataD214H 5555HD215H 5555HEnter "modify memoryMDS from 1#D214 thru1#D215 to 5555"Enter "display memoryMDS word from 1#D20Ato 1#D20B"Data should read asfollows:Data should read asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-39SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA9.24 5555HD555HD20AHD20BHD20AHD20BH5555HD555HA10 INTERNAL RFSELF-TESTINTERNAL RFSELF-TESTPerform test setup inaccordance with table 4.Set up video ASICaccording to table 4.Mode SInterfacePanelSTBY/ON: ONPerform test setup inaccordance with table 4.Enter "END"Enter "SCP MDS"Enter "load verify MDSIT100P.RA"Enter "modify registersMDS E0 80E"Enter "modify registersMDS P 109."Enter "Set discretes MDSto IFA."Enter "run MDS"Program takes only afraction of a second torun. When all six frontpanel LEDs areilluminated, program iscomplete.Short Mode SBottom AntennaShort Mode SBottom AntennaA10.1 N/A Initiate the self-test bywriting to memory asshown.Address DataOC02EH 0031HEnter "modify memoryMDS word 1#0C02E0031"Enter "display memoryMDS word from 1#C000to 1#C003"N/AThe received interrogationdata shall be as shown.Data shall indicate asfollows:Address Address
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-40SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA10.2 5555H 0C000H thru 0C003H 0C000H thru OC003H 5555HLong Mode STop AntennaLong Mode STop AntennaA10.3 N/A Initiate the self-test bywriting to memory asshown.Address Data0C007H thru0C00DH AAAAH0C02EH 0037HEnter "modify memoryMDS word 1#C007 thru1#C00D to AAAA"Enter "modify memoryMDS word 1#0C02E0037"N/AEnter "display memoryMDS word from 1#C000to 1#C007"The received interrogationdata shall be as shown.Data shall indicate asfollows:Address AddressA10.4 AAAAH 0C000H thru 0C006H 0C000H thru 0C006H AAAAHMode S Long SquitterTop Antenna Pwr VldMode S Long SquitterTop Antenna Pwr VldA10.5 N/A Set up reply data bywriting to memory asshown. (Send preamblepulses only.)Address Data0C007H F000H0C008H thru0C00DH 0000HMode SInterfacePanelSTBY/ON: ONEnter "modify memoryMDS word 1#C007 F000"Enter "modify memoryMDS word 1#C008 thru1#C00D to 0000"N/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 003FHEnter "modify memoryMDS word 1#0C02E003F"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-41SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA10.6 XXX8Hbits 4 and5 = 1Observe the top antennapower valid signal byreading the self-teststatus word, address0C011H. This word shallbe as specified.Enter "display memoryMDS word from 1#C011to 1#C011"Location shall be asspecified.XXX8Hbits 4 and5 = 1(X = don't care) (X = don't care)Mode S Long SquitterBot Antenna Pwr VldMode S Long SquitterBot Antenna Pwr VldA10.7 N/A Initiate the self-test bywriting to memory asshown.Address Data0C02EH 003DHMode SInterfacePanelSTBY/ON: ONEnter "modify memoryMDS word 1#C02E 003D"N/AA10.8 XXXX4Hbits 4 and5 = 1Observe the bottomantenna power validsignal by reading the self-test status word, address0C011H. This word shallbe as specified.Enter "display memoryMDS word from 1#C011to 1#C011"This location shall be asspecified.XXXX4Hbits 4 and5 = 1(X = don't care) (X = don't care)ATCRBS Mode ATop AntennaATCRBS Mode ATop AntennaA10.9 N/A Set up interrogation datafor Mode A.Address Data0C007H E000H0C008H 0000H0C009H E000H0C00AH 0000H0C00BH 0000H0C00CH 0000H0C00DH 0000HModify memory accordingto the following table:(Enter "modify memory<address> to <data>")Address Data1#C007 E0001#C008 00001#C009 E0001#C00A 00001#C00B 00001#C00C 00001#C00D 0000N/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 0036HEnter "modify memoryMDS word 1#0C02E0036"
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-42SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONHA10 .10XXX2H Observe the Mode Asignal by reading the self-test status word, address0C011H. Word shall beas specified.IFR 1400CW/NORM/OFF: OFFTurn IFR 1400CW/NORM/OFF Switch to“OFF” position. Enter"display memory MDSword from 1#C011 to1#C011"This location shall be asspecified.XXX2H(X = don't care) (X = don't care)ATCRBS Mode CBot AntennaATCRBS Mode CBot AntennaA10 .11N/A Set up interrogation datafor Mode C.Address Data0C007H E000H0C008H 0000H0C009H 0000H0C00AH 0000H0C00BH 0000H0C00CH 0E00H0C00DH 0000HModify memory accordingto the following table:(Enter "modify memory<address> to <data>")Address Data1#C007 E0001#C008 00001#C009 00001#C00A 00001#C00B 00001#C00C 0E001#C00D 0000N/AInitiate the self-test bywriting to memory asshown.Address Data0C02EH 0030HEnter "modify memoryMDS word 1#0C02E0030"A10 .12XXX1H Observe the Mode Asignal by reading the self-test status word, address0C011H. Word shall beas specified.Enter "display memoryMDS word from 1#C011to 1#C011"This location shall be asspecified.XXX1H(X = don't care) (X = don't care)
SECURITY NOTATION SPECNO. IT4061400-907SEE PAGE INDEXFOR THIS SHEETREV LETTERCAGECODE 58960 REV LTRSEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.REV TEST SPECIFICATION PROCEDURE SPECIFICATIONLTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITSAW/CRITICAL NOTATIONSUPPLEMENTSA-43SECURITY NOTATION PAGE15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.ENGINEERINGSPECIFICATIONA10 .13N/A Perform test setup inaccordance with table 1.Perform test setup inaccordance with table 1.N/ASTBY/ONdiscrete(hardware path)S-1403FUNC 1Interrogate the UUT withan ATCRBS Mode Ainterrogation at thestandard rate and power.ATC-1400AXPDR MODEAPRF: 0450RF Lvl: -50CW/NORM/OFF: NORMTurn XPDR MODE controlknob to A position. TurnPRF thumbwheels to 450Hz.Mode SInterfacePanelSTBY/ON: ONA10 .14>90% Observe the ATCRBS %reply. The value shall beas specified.Read the % reply displayon the ATC-1400A. Thedisplay shall indicate asspecified.>98%Switch the UUT toSTANDBY mode.Mode SInterfacePanelSTBY/ON: STBYOn the Mode S inter-facepanel, toggle theSTBY/ON switch to theSTBY position.A10 .15<10% Observe the ATCRBS %reply. The value shall beas specified.Read the % reply displayon the ATC-1400A. Thedisplay shall indicate asspecified.<2%This is the end of PC/CPIemulation testing.Continue testing UUT withtests 11 thru 28.

Navigation menu