ADC Telecommunications DSC0801A Digivance SCS 800 MHz Booster System User Manual 75187

ADC Telecommunications Inc Digivance SCS 800 MHz Booster System 75187

Users Manual Page 2 20 revised

ADCP-75-187 • Preliminary Issue 1B • November 2005 • Section 2: DESCRIPTIONPage 2-20© 2005, ADC Telecommunications, Inc.Note 1: Per Industry Canada Section 5.3 - The rated output power of this equipment is for singlecarrier operation. For situations where multiple carrier signals are present, the rating would haveto be reduced by 3.5 dB, especially where the output signal is re-radiated and can causeinterference to adjacent band users. This power reduction is to be by means of input power orgain reduction and not by an attenuator at the output of the device. Composite RF Output power of both bands (see Note 1at end of table)38.1 dBm (6.5 Watts) at remote antenna port with –40 dBm input10 Watts at LPA output Configurable RF Output    Range    Step size31 dB at remote unit1 ± 0.5 dB ± 10% of attenuation monotonicTransmit path insertion loss 2.5 dB maximumRF Reverse Path - 800/900 MHzSystem bandwidth 18 MHz5 MHz800 MHz receive900 MHz receiveFrequency range 806–824 MHz896–901 MHzPropagation delay < 8 µs (typical) Excludes fiber delayConfigurable propagation delay    Range    Step sizeUp to 63 µs0.1µs ±1 100 nsPlus standard propagation delayGain of reverse path    Overall gain    Gain variation30 ± 2 dB at band center at room temperature3 dB over temperatureGain flatness    Band flatness    Channel flatness± 2.0 dB across frequency range± 1.5 dB variation across any 1.25 MHz channelOut-of-band rejection –40 dB bandwidth at < 30 MHzSpurious (in-band self gener-ated)–110 dBm referred to inputIntermodulation –62 dBc two tones @ –50 dBmSystem noise figure 9 dB at mid-bandConfigurable RF output    Range    Step size31 dB1 ± 0.5 dB ± 10% of attenuation monotonicBlocking dynamic range 70 dBLevel limiting ALC threshold –40 dBm ± 3 dB instantaneousLevel limiting ALC range 27 dBTable 2-5. SCS 800/900 MHz SMR System Nominal Specifications, continuedPARAMETER SPECIFICATION REMARKS

Navigation menu