ADC Telecommunications DSC0801A Digivance SCS 800 MHz Booster System User Manual 75187

Download:
Mirror Download [FCC.gov]
Document ID	690059
Application ID	bvrfDJVU2jvB8S63y1xTcQ==
Document Description	Users Manual Page 2 20 revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.63kB (32881 bits)
Date Submitted	2006-08-04 00:00:00
Date Available	2006-08-04 00:00:00
Creation Date	2006-06-15 13:25:13
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2006-06-15 13:25:31
Document Title	75187.book
Document Creator	FrameMaker 6.0

ADCP-75-187 • Preliminary Issue 1B • November 2005 • Section 2: DESCRIPTION
Table 2-5. SCS 800/900 MHz SMR System Nominal Specifications, continued
PARAMETER
SPECIFICATION
Composite RF Output power of
both bands (see Note 1at end of
table)
38.1 dBm (6.5 Watts) at remote 10 Watts at LPA output
antenna port with –40 dBm input
Configurable RF Output
Range
Step size
Transmit path insertion loss
RF Reverse Path - 800/900 MHz
System bandwidth
31 dB at remote unit
1 ± 0.5 dB ± 10% of attenuation
monotonic
2.5 dB maximum
18 MHz
5 MHz
Frequency range
806–824 MHz
896–901 MHz
Propagation delay
< 8 µs (typical)
Configurable propagation delay
Range
Step size
Up to 63 µs
0.1µs ±1 100 ns
Gain of reverse path
Overall gain
Gain variation
Gain flatness
Band flatness
Channel flatness
800 MHz receive
900 MHz receive
Excludes fiber delay
Plus standard propagation delay
30 ± 2 dB at band center at room
temperature
3 dB over temperature
± 2.0 dB across frequency range
± 1.5 dB variation across any
1.25 MHz channel
Out-of-band rejection
–40 dB bandwidth at < 30 MHz
Spurious (in-band self generated)
–110 dBm referred to input
Intermodulation
–62 dBc
System noise figure
9 dB at mid-band
Configurable RF output
Range
Step size
REMARKS
two tones @ –50 dBm
31 dB
1 ± 0.5 dB ± 10% of attenuation
monotonic
Blocking dynamic range
70 dB
Level limiting ALC threshold
–40 dBm ± 3 dB instantaneous
Level limiting ALC range
27 dB
Note 1: Per Industry Canada Section 5.3 - The rated output power of this equipment is for single
carrier operation. For situations where multiple carrier signals are present, the rating would have
to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause
interference to adjacent band users. This power reduction is to be by means of input power or
gain reduction and not by an attenuator at the output of the device.
Page 2-20
© 2005, ADC Telecommunications, Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2006:06:15 13:25:31-05:00
Create Date                     : 2006:06:15 13:25:13-05:00
Title                           : 75187.book
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 4.05 for Windows
Page Count                      : 1

EXIF Metadata provided by EXIF.tools