ADC Telecommunications F0064-111 InterReach® Fusion Remote Access Unit User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	921261
Application ID	KE1c3bfo80vl38P1lG8+Nw==
Document Description	User manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.86kB (35781 bits)
Date Submitted	2008-03-29 00:00:00
Date Available	2008-03-29 00:00:00
Creation Date	2008-03-07 10:35:29
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-03-07 10:35:29
Document Title	Microsoft Word - WiMAX Gen1 System Specification Rev3.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	macallt

Document Title: WiMAX
Gen 1 Spécification
REV
Rev 3
Page
1 of 4
Purpose
Purpose of this document is to list WiMAX Gen1 System Specifications.
Scope
This specification establishes the performance requirements for the WiMAX distributed antenna
system (DAS).
Responsibility
LGC Wireless is responsible for maintaining this document.
4.1
System Level Specification
Operating Frequencies
WiMAX Gen1 will have two frequency bands. This will allow customer to run Band 1 as main band and
Band 2 as MIMO. Second, it allows customer to run two independent bands for example one could be
sector 1 and other could be sector 2 with same or different frequency.
4.1.1
WiMAX Frequency Band 1:
WiMAX Band 1 has four sub bands that cover Complete WiMAX band from 2496-2690MHz in 60MHz sub
bands.
These tables might change based on marketing requirements.
Downlink
Uplink
RF Passband (MHz)
RF Passband (MHz)
WiMAX B1
2496 - 2556
2496 - 2556
WiMAX B2
2546 - 2606
2546 - 2606
WiMAX B3
2596 - 2656
2596 - 2656
WiMAX B4
2630 - 2690
2630 - 2690
Band
4.1.2
WiMAX Frequency Band 2:
WiMAX Band 2 has four sub bands that cover Complete WiMAX band from 2496-2690MHz in 60MHz
sub bands.
Downlink
Uplink
RF Passband (MHz)
RF Passband (MHz)
WiMAX B1
2496 - 2556
2496 - 2556
WiMAX B2
2546 - 2606
2546 - 2606
Band
Filename: WiMAX Gen1
System Specification
Rev3.doc
When printed or copied, document is for REFERENCE ONLY as of,
03/07/08
LGC Wireless Confidential
Document Title: WiMAX
Gen 1 Spécification
REV
Rev 3
4.2
Page
2 of 4
WiMAX B3
2596 - 2656
2596 - 2656
WiMAX B4
2630 - 2690
2630 - 2690
RF Specifications
RF End-to-End Performance
Parameter
Average System Gain
System Gain Ripple
Output IP3 (SMF)
Units
dB
dB
dBm
Input IP3 (SMF)
dBm
Output P1dB
NF 1-1
NF 1-8
NF 1- 4 – 32
Output Noise Floor (SMF)
UL Limiter Level (referenced to input)
DL Limiter Level (referenced to output) for EPCS
Out-of-Band Spurious Output Levels (Non LO)
Passband Spurious Output Levels (Non LO)
dBm
dB
dB
dB
dBm/Hz
dBm
dBm
dBm
dBm
4.2.1
Downlink
Min Typ Max
15
3.0
4.5
33
38
Uplink
Min Typ Max
15
3.0
4.5
-10
25
-5
28
11
17
23
16
21
28
-100
-33
27
-13
-36
-85
-13
-75
System Phase Noise Performance
Phase Noise Performance Above 1GHz
Offset (kHz)
Typ (dBc/Hz)
Max (dBc/Hz)
0.1
60
57
73
68.5
10
83
78
30
96.5
92
100
108
104
Environmental Specifications:
Parameter
Main Hub and Expansion Hub
Remote Access Unit
Operating Temperature
0° to +45°C (+32° to +113°F)
–25° to +45°C (–13° to +113°F)
Non-operating Temperature
–20° to +85°C (–4° to +185°F)
–25° to +85°C (–13° to +185°F)
Filename: WiMAX Gen1
System Specification
Rev3.doc
When printed or copied, document is for REFERENCE ONLY as of,
03/07/08
LGC Wireless Confidential
Document Title: WiMAX
Gen 1 Spécification
REV
Rev 3
Operating Humidity; non-condensing
Page
3 of 4
5% to 95%
5% to 95%
Cabling Specifications:
Parameter
Specifications
Optical Fiber
These specifications assume that the fiber optic cable, single-mode, is Corning with SC/APC connectors.
Optical Power
Budget
Uplink and Downlink Maximum: 3 dB Optical power budget between Main Hub and Expansion Hub
CATV
The specifications in this document assume that CATV RG-59 cable is CommScope 2065V, CATV RG-6 cable
is CommScope 2279V, and CATV RG-11 cable in CommScope 2293K or equivalent, with 75 ohm F
connectors.
CATV Lengths
Minimum: 135 meters Maximum with RG-59
Maximum: 140 meters Maximum with RG-6
Maximum: 235 meters Maximum with RG-11
Physical Specifications:
Parameter
Main Hub
Expansion Hub
Remote Access Unit
IF/RF Connectors
4 N, female (50 ohms), 1
Downlink / Uplink pair per
MIMO Channel
8 F, female
(CATV -75 ohms)
1 F, female (CATV - 75
ohms) 1 N, female (antenna
- 50 ohms)
External Alarm Connector
(contact closure)
1 9-pin D-sub, female
—
—
ADMIN/LAN Interface
Connector
1 RJ-45, female 1 9-pin Dsub, male for optional
modem
1 RJ-45, female 1 9-pin Dsub, male
—
Fiber Connectors
4 Pair, SC/APC
1 Pair, SC/APC
—
AC Power (Volts)
Rating: 100-240V AC, 1A,
50–60 Hz
Rating: 100-240V AC, 6A,
50–60 Hz
54V DC (from the E Hub)
Operating Range: 90–132V
AC/170–250V AC autoranging
Operating Range: 90–132V
AC/170–250V AC autoranging
DC Power (Volts)
Rating/Operating Range:
38-64V DC, 2.5A
Rating/Operating Range:
38-64V DC, 14A
Power Consumption (W)
30
Enclosure Dimensions
(height ×width ×depth)
Weight
Filename: WiMAX Gen1
System Specification
Rev3.doc
89 mm × 438 mm × 381
mm (3.5 in. × 17.25 in. × 15
in.) 2U
< 5.5 kg (< 12 lb)
4 RAUs: 240 typical, 310
max. 8 RAUs: 400 typical,
530 max.
89 mm × 438 mm × 381 mm
(3.5 in. × 17.25 in. × 15 in.)
2U
< 6.6 kg (< 14.5 lb)
—
—
54 mm × 286 mm × 281 mm
(2.13 in. × 11.25 in. × 11.13
in.)
< 2.1 kg (< 4.6 lb)
When printed or copied, document is for REFERENCE ONLY as of,
03/07/08
LGC Wireless Confidential
Document Title: WiMAX
Gen 1 Spécification
REV
Rev 3
Page
4 of 4
Note Section 8 and 9 are for internal use only. They are for ATE configuration.
Main Hub TDD Requirements:
TDD Duplex port or Simplex ports will be configured in manufacturing based on
customer requirements.
8.1
MH TDD threshold configuration:
Main Hub threshold is configured at ATE. Each band and each Sub Band have different threshold and
memory location.
MH will switch to Downlink at input power of -10dBm. This is configured at ATE with 0dB System gain.
After setting MH gain and calibration threshold, ATE will inject -10dBm signal into MH and measure
detector threshold through A/D and program it into assigned memory location. ATE will measure and
program this value into each sub band it tests.
These steps are repeated for both bands.
RAU TDD Threshold Requirements:
9.1
RAU Threshold Configuration
RAU Threshold is set after RAU configuration is done. Each band have different threshold, and each sub
band has different threshold.
Band 1 setup: RAU Output power is set to -10dBm and Band 1 Downlink Burst Detector output is
measured through A/D and programmed in assigned memory location. Firmware uses this location for
Comparator threshold. These steps are repeated for Band 2.
10 RAU and MH Unit
RAU need to be configured to calibrated Pout of 5dBm from RAU.
MH need to be configured to +5dBm input Power with 0dB system gain.
11 Change History:
Rev
ECO
NO.
Filename: WiMAX Gen1
System Specification
Rev3.doc
Date
1/3/08
2/14/08
Description of Change
Change By
Add Section 8 and 9 TDD Threshold.
Added section 10
Baljit Singh
Baljit Singh
When printed or copied, document is for REFERENCE ONLY as of,
03/07/08
LGC Wireless Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5dc734b7-9c95-4d1f-8b4d-c3907a4411f2
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:03:07 10:35:29-08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:03:07 10:35:29-08:00
Document ID                     : uuid:a34fcddf-8b81-4f6a-95d5-6d9fd5d20c13
Format                          : application/pdf
Creator                         : macallt
Title                           : Microsoft Word - WiMAX Gen1 System Specification Rev3.doc
Author                          : macallt

EXIF Metadata provided by EXIF.tools