ADC Telecommunications RPT190AA ADC's In-Building Wireless Repeaters BDA - PCS User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	847819
Application ID	IO/LAGJyTTFDF0SfXxQ8jQ==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.08kB (288515 bits)
Date Submitted	2007-09-26 00:00:00
Date Available	2007-09-26 00:00:00
Creation Date	2007-07-27 09:25:56
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2007-08-10 09:11:40
Document Title	User Manual 2
Document Creator	Adobe InDesign CS2 (4.0.4)

In-building Wireless Repeaters
850 MHz Cellular and 1900 MHz PCS
ADC’s new in-building repeater product line offers powerful and cost-effective solutions to
enhance indoor coverage for small to medium-size enterprise venues. This simple-to-use device
is optimal for augmenting RF coverage in offices buildings, retail stores, warehouses, and other
facilities between 50,000 to 100,000 square feet. The repeater features a compact design, blends
easily into any facility, and is easy to set up through a simple GUI interface. The device offers the
flexibility to program band selection and optimizes alarm and performance settings as desired.
The repeater may also be used in conjunction with a distributed antenna system (DAS).
Benefits:
• Low maintenance RF repeater system - set it and forget about it
Spec Sheet
• Band selectivity for Cellular & PCS
			 • Choose either a 5MHz block, a 15MHz block or any combination of a 5 & 15MHz block:
		 A, D, B, E, F and C
			 • Choose either Cellular A, A’, A“ or B and B’
• Excellent selectivity, each band has discrete IF SAW filters to mitigate interference
• Easy installation
• User-friendly GUI interface
• Provides product performance status via LED lights & optional enhanced alarm and management
through on-board modem
www.adc.com
•
+1-952-938-8080
•
1-800-366-389 1
In-building Wireless Repeaters
850 MHz Cellular and 1900 MHz PCS
7/07
•
105105AE
In-building Wireless Repeaters
System Description
The repeater transmits RF in both directions to provide indoor wireless coverage. The device is connected
via coax to a donor antenna that is typically located on a rooftop or external wall of a building, directed
at the donor cell-site. The repeater is mounting inside the building and distributes the RF over coax to an
indoor antenna located in the desired coverage area.
Typical Installation
GUI Features
Automatic Level Control (ALC)
The system will control the output power to
maintain the stability and protect the unit.
Sleep Mode
Mode is activated when the reverse output RF
power shows below -65dBm for over 3 minutes.
The system re-activates to the wake up mode if
the signal reaches over -65dBm.
FPO
Band Selection
The BDA offers programmable band selection.
Isolation Check
There is isolation check for the forward path
and reverse path when the system is set up and
powered on.
User-friendly Interface
USB connection allows you to control;
• sleep mode
• band selection
• on/off system controls
Over Power Shut Down
The system can detect if there is excessive
power and will shut down to protect the unit
and will automatically resume operation when
normal power levels are reached.
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
In-building Wireless Repeaters
850 MHz Cellular and 1900 MHz PCS
Typical Specifications
Operating Frequency for the 850 MHz
Down Link:
Up Link:
Output Power:
Gain:
Flatness:
Out of Band Gain:
1930-1990 MHz
1850-1910 MHz
5MHz, 15MHz, or a combination of a 5 & 15MHz selectable
869-894 MHz
824-849 MHz
A, A’, A’’ OR B, B’ selectable
+13dBm
60dB
+0dB, -4dB Full Band
45dB Offset 1MHz
35dB Offset 5MHz
Noise Figure
Up Link:
VSWR:
Frequency Stability:
ALC:
Gain Control Range:
5dB max
1.5 max
±0.05ppM max
20dB min
10dB min
1dB Step
ACPR
CDMA 10FA:
45dBc @ 885KHz
50dBc @ 1.98MHz
5usec max
8V
AC 110~220V to DC 8V SMPS Adaptor
3A max
Delay:
Supply Voltage:
Current Consumption:
DC 8V Current Consumption
ENVIRONMENTAL
Operating Temperature:
Humidity
Indicators/Controls
USB Port:
Sleep Mode:
Oscillation Check:
LED:
Sleep Mode:
Shutdown:
Oscillation:
Power
ALC On/Off:
RF Connector: N Type (Donor ANT):
-5°C ~ +45°C
85%
Gain, ALC Level Setting, Alarm
Up Link non signal (below-65dBm): Off
Input over -65dBm: On (in 1 sec)
Observation Down Link
Shut Down +16dBm
(U/L, D/L)
(U/L, D/L)
(D/L)
Setting from GUI
Service ANT: SMA
7/07
•
105105AE
In-building Wireless Repeaters
RF Specification
Operating Frequency for the 1900 MHz
Down Link:
Up Link:
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
Spec Sheet
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
105105AE 7/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
About                           : 364d206e-d686-11d9-b79c-ca1f70be274a
Create Date                     : 2007:07:27 09:25:56-05:00
Metadata Date                   : 2007:08:10 09:11:40-05:00
Modify Date                     : 2007:08:10 09:11:40-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6821 bytes, use -b option to extract)
Instance ID                     : uuid:96163c0b-a3d2-43e8-8c21-171e34248009
Document ID                     : adobe:docid:indd:49f74762-3cf1-11dc-81fc-b294b46ff579
Rendition Class                 : proof:pdf
Derived From Instance ID        : 507e0327-1c12-11dc-a4c0-84f34ddff833
Derived From Document ID        : adobe:docid:indd:482ed8cf-5450-11da-906a-b2083b848a1a
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:BD9E520D3CFB11DC87BCE33954687B25, uuid:c0730f28-3b9e-11dc-80e1-001451640148, uuid:1C5098523CFD11DC87BCE33954687B25
Manifest Reference Document ID  : uuid:BD9E520C3CFB11DC87BCE33954687B25, uuid:29D2843B3D0711DCBC57F87EFF6F2EC4, uuid:1C5098513CFD11DC87BCE33954687B25
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CS2 (4.0.4)

EXIF Metadata provided by EXIF.tools