ADC Telecommunications RPT190AA ADC's In-Building Wireless Repeaters BDA - PCS User Manual 2

ADC Telecommunications Inc ADC's In-Building Wireless Repeaters BDA - PCS 2

Contents

User Manual 2

www.adc.com • +1-952-938-8080 • 1-800-366-3891Spec SheetIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCSADC’s new in-building repeater product line offers powerful and cost-effective solutions to enhance indoor coverage for small to medium-size enterprise venues. This simple-to-use device is optimal for augmenting RF coverage in offices buildings, retail stores, warehouses, and other facilities between 50,000 to 100,000 square feet. The repeater features a compact design, blends easily into any facility, and is easy to set up through a simple GUI interface. The device offers the flexibility to program band selection and optimizes alarm and performance settings as desired.  The repeater may also be used in conjunction with a distributed antenna system (DAS).Benefits:Low maintenance RF repeater system - set it and forget about it Band selectivity for Cellular & PCS     •  Choose either a 5MHz block, a 15MHz block or any combination of a 5 & 15MHz block:      A, D, B, E, F and C     •  Choose either Cellular A, A’, A“ or B and B’Excellent selectivity, each band has discrete IF SAW filters to mitigate interferenceEasy installationUser-friendly GUI interfaceProvides product performance status via LED lights & optional enhanced alarm and management through on-board modem••••••
7/07 • 105105AE  In-building Wireless RepeatersIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCS2www.adc.com  •  +1-952-938-8080  •  1-800-366-3891System Description The repeater transmits RF in both directions to provide indoor wireless coverage. The device is connected via coax to a donor antenna that is typically located on a rooftop or external wall of a building, directed at the donor cell-site. The repeater is mounting inside the building and distributes the RF over coax to an indoor antenna located in the desired coverage area.Typical InstallationGUI FeaturesAutomatic Level Control (ALC)The system will control the output power to maintain the stability and protect the unit.Sleep ModeMode is activated when the reverse output RF power shows below -65dBm for over 3 minutes. The system re-activates to the wake up mode if the signal reaches over -65dBm. Band SelectionThe BDA offers programmable band selection.Isolation CheckThere is isolation check for the forward path and reverse path when the system is set up and powered on.User-friendly Interface USB connection allows you to control;  •  sleep mode  •  band selection  •  on/off system controlsOver Power Shut DownThe system can detect if there is excessive power and will shut down to protect the unit and will automatically resume operation when normal power levels are reached.FPO
7/07 • 105105AE  In-building Wireless RepeatersIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCS3www.adc.com  •  +1-952-938-8080  •  1-800-366-3891Typical SpecificationsRF SPECIFICATION  Operating Frequency for the 1900 MHz    Down Link:  1930-1990 MHz    Up Link:  1850-1910 MHz      5MHz, 15MHz, or a combination of a 5 & 15MHz selectable  Operating Frequency for the 850 MHz    Down Link:  869-894 MHz    Up Link:  824-849 MHz       A, A’, A’’ OR B, B’ selectable  Output Power:  +13dBm  Gain:  60dB  Flatness:  +0dB, -4dB Full Band  Out of Band Gain:  45dB Offset 1MHz      35dB Offset 5MHzNOISE FIGURE  Up Link:  5dB max  VSWR:  1.5 max  Frequency Stability:  ±0.05ppM max  ALC:  20dB min  Gain Control Range:  10dB min      1dB StepACPR  CDMA 10FA:  45dBc @ 885KHz      50dBc @ 1.98MHz  Delay:   5usec max  Supply Voltage:  8 V      AC 110~220V to DC 8V SMPS AdaptorCurrent Consumption:  3A max      DC 8V Current ConsumptionENVIRONMENTAL  Operating Temperature:  -5°C ~ +45°C  Humidity  85%INDICATORS/CONTROLS  USB Port:  Gain, ALC Level Setting, Alarm  Sleep Mode:  Up Link non signal (below-65dBm): Off      Input over -65dBm: On (in 1 sec)  Oscillation Check:  Observation Down Link LED:  Shut Down +16dBm    Sleep Mode:  (U/L, D/L)    Shutdown:  (U/L, D/L)    Oscillation:  (D/L)  Power   ALC On/Off:  Setting from GUI  RF Connector: N Type (Donor ANT):  Service ANT: SMA
Website: www.adc.comFrom North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota  USA  55440-1101Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify  product  specifications  by  contacting  our  headquarters  office  in  Minneapolis.  ADC  Telecommunications,  Inc. views its  patent portfolio as  an important corporate  asset and vigorously enforces  its patents. Products  or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer105105AE  7/07  Original  ©  2007   ADC Telecommunications, Inc.  All Rights ReservedSpec Sheet

Navigation menu