Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 792598 |
| Application ID | 5ghkiZSEkbFmgElWqjj7Fg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.65kB (345683 bits) |
| Date Submitted | 2007-05-16 00:00:00 |
| Date Available | 2007-05-16 00:00:00 |
| Creation Date | 2006-07-21 14:50:31 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2007-05-16 09:18:54 |
| Document Title | 61700412E1-1A.book |
| Document Creator | FrameMaker 7.0 |
| Document Author: | rpotts |
NetVanta 150 Series Hardware Installation Guide 1700412E1 61700412E1-34A July 2006 NetVanta 150 Trademarks NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication. Software Licensing Agreement Each ADTRAN product contains a single license for ADTRAN supplied software. Pursuant to the Licensing Agreement, you may: (a) use the software on the purchased ADTRAN device only and (b) keep a copy of the software for backup purposes. This Agreement covers all software installed on the system as well as any software available on the ADTRAN website. In addition, certain ADTRAN systems may contain additional conditions for obtaining software upgrades. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 Phone: (256) 963-8000 Copyright © 2006 ADTRAN, Inc. All Rights Reserved. Printed in U.S.A. Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Conventions Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to equipment. Warnings provide information that could prevent injury or endangerment to human life. 61700412E1-34A Copyright © 2006 ADTRAN, Inc. Safety Instructions NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for special disposal instructions. 5. The socket-outlet shall be installed near the equipment and shall be easily accessible. Save These Important Safety Instructions Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide FCC-Required Information FCC-Required Information FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of FCC rules and requirements adopted by ACTA. Each registered interface has a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company. 2. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given; otherwise, notification is given as soon as possible. The telephone company will advise the customer of the right to file a complaint with the FCC. 3. The telephone company may make changes in its facilities, equipment, operations, or procedures that could effect the proper operation of this equipment. Advance notification and the opportunity to maintain uninterrupted service are given. 4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected or it is certain the equipment is not malfunctioning. 5. This unit contains no user-serviceable parts. 6. This equipment is designed to connect to the telephone network or premises wiring using an FCC-compatible modular jack, which is compliant with Part 68 and requirements adopted by ACTA. 61700412E1-34A Copyright © 2006 ADTRAN, Inc. FCC Radio Frequency Interference Statement NetVanta 150 Wireless Access Point ABG Hardware FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide FCC Compliance Notice: Radio FCC Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Placement and Range Guidelines The maximum indoor range for 802.11b devices is 500 feet (152.4m). However, the physical placement of your wireless access point (WAP) can affect the operating range of the unit. When determing the placement of your WAP, consider the following guidelines to avoid significant performance degradation or inability to wirelessly connect to the WAP: • • Place the WAP away from potential sources of interference, such as PCs, large metal surfaces, microwaves, and 2.4 GHz cordless phones. Place the WAP in an elevated location such as a high shelf that is near the center of the wireless coverage area for all mobile devices. RF Exposure Warning for North America, and Australia To meet FCC and other national safety guidelines for RF exposure, the antennas for this device must be installed with a minimum separation distance of 7.9in (20cm) from any person. The antennas shall not be colocated with other antenna or radio transmitter. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference to co-channel MSS operations. 61700412E1-34A Copyright © 2006 ADTRAN, Inc. Industry Canada Compliance InformationNetVanta 150 Wireless Access Point ABG Hardware Installation Industry Canada Compliance Information The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on the product labeling/markings. The REN assigned to each terminal device indicates the maximum number of terminals that can be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices should not exceed five (5). Canadian Emissions Requirements This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications. Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee par le ministre des Communications. Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Warranty Warranty ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found in the Support section of the ADTRAN website at http://www.adtran.com. Product Registration Registering your product helps ensure complete customer satisfaction. Please take time to register your products in the Support section of the ADTRAN website at http://www.adtran.com Product Support Information A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service, RMA requests, training, or more information, use the contact information shown below. Repair and Return If you determine that a repair is needed, please contact our Customer and Product Service (CaPS) department to have an RMA number issued. CaPS should also be contacted to obtain information regarding equipment currently in house or possible fees associated with repair. CaPS Department (256) 963-8722 Identify the RMA number clearly on the package (below the address), and return to the following address: ADTRAN Customer and Product Service 901 Explorer Blvd. (East Tower) Huntsville, Alabama 35806 RMA # _____________ Pre-Sale Inquiries and Applications Support Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed, the ADTRAN Support website provides a variety of support services such as a searchable knowledge base, the latest product documentation, application briefs, case studies, and a link to submit a question to an Applications Engineer. All of this, and more, is available in the Support section of the ADTRAN website at http://www.adtran.com. When needed, further pre-sales assistance is available by calling our Applications Engineering Department. Applications Engineering (800) 615-1176 61700412E1-34A Copyright © 2006 ADTRAN, Inc. Product Support Information NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN website provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available in the Support section of the ADTRAN website at http://www.adtran.com. When needed, further post-sales assistance is available by calling our Technical Support Center. Please have your unit serial number available when you call. Technical Support (888) 4ADTRAN International Technical Support 1-256-963-8716 Installation and Maintenance Support The ADTRAN Custom Extended Services (ACES) program offers multiple types and levels of installation and maintenance services which allow you to choose the kind of assistance you need. This support is available at: http://www.adtran.com/aces For questions, call the ACES Help Desk. ACES Help Desk (888) 874-ACES (2237) Training The Enterprise Network (EN) Technical Training Department offers training on our most popular products. These courses include overviews on product features and functions while covering applications of ADTRAN's product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at your site. For more information about training, please contact your Territory Manager or the Enterprise Training Coordinator. 10 Training Phone (800) 615-1176, ext. 7500 Training Fax (256) 963-6700 Training Email training@adtran.com Copyright © 2006 ADTRAN, Inc. 61700412E1-34A Table of Contents Introduction to the NetVanta Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpack and Inspect the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents of ADTRAN Shipments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 18 19 19 Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reviewing the Base Unit Front Panel Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reviewing the Rear Panel Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Panel Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 20 21 21 Unit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supplying Power to the NetVanta 150 Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connect to the NetVanta 150 Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Factory Default Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 22 22 23 24 24 24 24 Appendix A. Connector Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 11 Table of Contents 12 NetVanta 150 Wireless Access Point ABG Hardware Copyright © 2006 ADTRAN, Inc. 61700412E1-34A List of Figures Figure 1. Figure 2. Figure 3. NetVanta 150 Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 NetVanta 150 Rear Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Wall Mounting the NetVanta 150 Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 13 List of Figures 14 NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Copyright © 2006 ADTRAN, Inc. 61700412E1-34A List of Tables Table 1. Table A-1. 61700412E1-34A NetVanta 150 Unit LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 10/100BaseT Ethernet Port Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Copyright © 2006 ADTRAN, Inc. 15 List of Tables 16 NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Copyright © 2006 ADTRAN, Inc. 61700412E1-34A 1. INTRODUCTION TO THE NETVANTA SOLUTION The NetVanta 150 is a standalone wireless access point (WAP) designed for use by enterprise customers in the small to medium enterprise (SME) market space. The primary application is to provide a secure gateway for wireless clients to connect to the wired network provided by NetVanta switch and router products. The NetVanta 150 can operate as a wireless bridge for Local Area Networks (LAN) and as a repeater to extend the range of the wireless network. This unit offers the following features: • Power from a POE enabled RJ45 Ethernet connection or from an ADTRAN external 12 V DC converter supply. • Supports IEEE802.11a, 802.11b, and 802.11g wireless access. It supports concurrent 802.11a and 802.11b/g connections. • Two dual-band antennas are included as standard equipment. • A single 10/100 Base-T Ethernet port for connection to the NetVanta switch/router product. • Two integral RP-SMA connectors provide connection for standard dual-band antennas. • Four LEDs provide status information and WAN/LAN activity information. • Reset switch for restoring default configuration. The NetVanta 150 user configuration and management are provided through the connected NetVanta switch/router. 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 17 Introduction to the NetVanta Solution NetVanta 150 Wireless Access Point ABG Hardware Installation Features and Specifications The following list highlights the major features of the NetVanta 150 unit. • • • • • • • • • • • • • • • • • • • • IEEE 802.11a Wireless IEEE 802.11b/g Wireless Concurrent 802.11a and 802.11 b/g connections Two rear-panel dual-band RP-SMA detachable antennas One 10/100 Base T Ethernet interface 802.3af POE support WEP/WPA/WPA2 Wireless Security Four front-panel LED indicators One rear-panel Reset switch Supports 802.11h Supports 802.11j Supports draft IEEE 802.11e WMM QoS WMM Wi-Fi certified Hardware encryption support for the Wi-Fi Protected Access (WPA) and IEEE 802.11i security specifications provides Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP) and WEP without performance degradation For product available in USA & Canada, only channel 1-11 can be operated of 2412-2462 MHz & will be limited to transmit in 5180 - 5240 MHz only by firmware control. Frequency Range: IEEE 802.11a: 5.150~5.350 GHz 5.745~5.825GHz Turbo mode: 5.760GHz/ 5.800GHz IEEE 802.11b/g : 2.412~2.462 GHz IEEE 802.11g Turbo : 2.437 GHz Dynamic Frequency Selection/Transmit Power Control (DFS/TPC) for international operation Environmental Operating Temperature: 32°F to 122°F (0°C to 50°C) Storage/Transport Temperature: 68°F to 185°F (20°C to 85°C) Humidity: Up to 95% non-condensing This hardware installation guide describes the NetVanta 150, details basic functionality, gives installation instructions, and lists unit specifications. For more information on router configuration for a specific application, refer to the quick configuration documents provided on the ADTRAN website at www.adtran.com. For details on the command line interface, refer to the Command Reference Guide, also on the website. 18 Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Introduction to the NetVanta Unpack and Inspect the System The NetVanta 150 unit is shipped in its own cardboard shipping carton. Open the carton carefully, and avoid slicing too deeply into the carton with sharp objects. After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (see Repair and Return on page 9). Contents of ADTRAN Shipments Shipment of the NetVanta 150 unit includes the following items: • • • NetVanta 150 Base Unit NetVanta 150 Quick Start Guide NetVanta 150 Ethernet cable (yellow) 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 19 Physical Description 2. NetVanta 150 Wireless Access Point ABG Hardware Installation Guide PHYSICAL DESCRIPTION Reviewing the Base Unit Front Panel Design Figure 1 shows the NetVanta 150 front panel. Figure 1. NetVanta 150 Front Panel Layout Front Panel LEDs The NetVanta 150 unit utilizes four LED indicators on the front panel. A single bi-color LED for the STAT condition and three single color LEDs for the ETH, 5GHz/802.11a and 2.4GHz/802.11b/g conditions. Table 1 describes these LEDs. Table 1. NetVanta 150 Unit LEDs LED Activity Indication Green (flashing) Unit is powering up. On power-up the STAT LED flashes until unit is ready for service. The STAT LED also flashes during firmware upgrade. Green (solid) Power is on. Red (solid) An error condition is present on the unit. Green (flashing) LAN activity is present (traffic in either direction). Green (solid) Powered device is connected to the Ethernet port (i.e., link integrity). Off There is no LAN activity on the Ethernet port (or unit is powered off). Off There is no 802.11a Wireless acitvity is detected. Green (flashing) Data is being transmitted or received via the 802.11a Wiresless band. Data includes network traffic as well as user data. Off There is no 802.11g or 802.11b Wireless acitvity is detected. Green (flashing) Data is being transmitted or received via the 802.11b/g Wiresless band. Data includes network traffic as well as user data. STAT ETH 5GHz/802.11a 2.4GHz/802.11b/g 20 Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Physical Description Reviewing the Rear Panel Design Figure 2 shows the NetVanta 150 rear panel. The unit accommodates a 12 VDC power supply. Optional 12 V Power Source Reset Switch 10/100 BaseT Ethernet PoE Port RP-SMA Antenna Connectors Figure 2. NetVanta 150 Rear Panel Layout Rear Panel Interfaces 10/100BaseT Ethernet Interface The ETH 0/1 port on the NetVanta 150 is an RJ-45 connector with Power over Ethernet capability. See Table A-1 on page 25 for the Ethernet port pinouts. The Ethernet port provides the following: • • • • • 10BaseT or 100BaseT with a single connector Auto-negotiation CSMA/CD IEEE 802.3 compatibility Auto MDI/MDIX 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 21 Unit Installation 3. NetVanta 150 Wireless Access Point ABG Hardware Installation Guide UNIT INSTALLATION The instructions and guidelines provided in this section cover hardware installation topics such as wall mounting and supplying power to the unit. To prevent electrical shock, do not install equipment in a wet location or during a lightning storm. Maximum recommended ambient operating temperature is 50°C. Installing the Antennas The NetVanta 150 unit ships with two dual-band RP-SMA detachable antennas. These must be installed before wall mounting the unit. Instructions for Attaching the Antennas Step Action Place either of the two antennas directly onto the antenna port on the rear panel labeled Antenna 1. See Figure 2 on page 21 to locate the ports on the rear panel. Twist the antenna onto the threads until it is secure. Repeat step 2 with the second antenna, attaching it to the Antenna 2 port. Once both antennas are secured, the antennas may be flexed at the joint to increase reception. Mounting Options The NetVanta 150 unit can be installed in a wallmount or tabletop configuration. The following section provides step-by-step instructions for wall mounting. 22 Copyright © 2006 ADTRAN, Inc. 61700412E1-34A NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Unit Installation Wall Mounting Instructions for Wall Mounting Step Action Decide on a location for the NetVanta 150 unit. Keep in mind that the unit needs to be mounted at or below eye-level so that the LEDs are viewable. Prepare the mounting surface by attaching a board (typically plywood, 3/ 4-inch to 1-inch thick) to a wall stud. Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide sufficient long-term stability. Install two #8 PAN headscrews (1 1/ 2-inch or greater in length) wood screws into the mounted board, following these guidelines and referring to Figure 3: • • • Screws should be spaced horizontally, approximately 5 inches apart. Find exact positioning by using the location of the two keyed insets on the bottom of the NetVanta 300 Series unit as a guide. Screws should be horizontally level with each other. Leave approximately 1/4 inch of the screws protruding from the board to allow the heads of the screws to slide into place in the unit’s keyed insets. Slide the keyed insets on the bottom of the unit’s chassis securely onto the screws. Proceed to the steps given in Getting Started on page 24. AT ST WA DB TD Figure 3. Wall Mounting the NetVanta 150 Unit 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 23 Unit Installation NetVanta 150 Wireless Access Point ABG Hardware Installation Guide Getting Started The 10/100BaseT Ethernet interface MUST NOT be metallically connected to interfaces which connect to the Outside Plant or its wiring. This interface is designed for use as an intrabuilding interface only. The addition of primary protectors is not sufficient protection to connect this interface metallically to OSP wiring. Supplying Power to the NetVanta 150 Unit The NetVanta 150 unit can be powered either by the LAN Ethernet connection or through the 12 VDC external supply. The Wall Supply is not included in shipment of this unit but can be requested from Adtran or your reseller. See Product Support Information on page 9 for more information on contacting Adtran. Connect to the NetVanta 150 Unit 1. Connect the NetVanta 150 unit to the PC using the ETH port on the back of the unit and the appropriate Ethernet cable. 2. Supply power to the PC and the NetVanta 150 unit and begin the operating system boot up process. During boot up, the PC will obtain an IP address from the NetVanta 150 unit DHCP server. By default, both the DHCP and HTTP servers are enabled. The default IP address is 10.10.10.1. 3. Enter the unit’s IP address in your browser address line. The default IP address is 10.10.10.1. 4. You will then be prompted for the username and password (the default settings are admin and password). 5. The initial GUI screen appears. 6. Click on Getting Started in the System menu on the left side of your screen and follow the on-line instructions. For security purposes, you should set up an admin password immediately. Use the Passwords page of the Web GUI to change this password. Factory Default Switch • If the factory default switch is pressed during bootup, the unit will stay in bootstrap mode. Since the unit has no serial port, Telnet has been built into the boot code. The default IP address is 10.10.10.1. The default switch must be pressed WHILE the power light is flashing green. Do not press the default switch BEFORE the power light is flashing green, as this will cause boot to be missed. • • 24 If the factory default switch is pressed and held for 5 seconds after boot, the ETH interface on the NetVanta 150 will default to 10.10.10.1 and all access policies will be removed from that interface. If the factory default switch is pressed for 30 seconds, a default configuration will overwrite your existing configuration and reboot the unit. Copyright © 2006 ADTRAN, Inc. 61700412E1-34A APPENDIX A. CONNECTOR PIN DEFINITIONS The following table provides the pin assignments for the NetVanta 150. Table A-1. 10/100BaseT Ethernet Port Pinouts Pin Name Description TX1 Transmit Positive TX2 Transmit Negative RX1 Receive Positive 4, 5 — Unused RX2 Receive Negative 7, 8 — Unused 61700412E1-34A Copyright © 2006 ADTRAN, Inc. 25 NetVanta 150 Wireless Access Point ABG Hardware Installation Guide "This device has been designed to operate with the antennas listed below, and having a maximum gain of 802.11a 3dBi and 802.11b/g 2dBi. Antennas not included in this list or having a gain greater than the designed Antennas is strictly prohibited for use with this device. The required antenna impedance is 50 ohms." Antenna Gain: IEEE 802.11a: 3dBi IEEE 802.11b/g: 2dBi Antenna Designation: Omni-directional Antenna "To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication." . that the device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems; . the maximum antenna gain permitted (for devices in the 5250-5350 MHz band) to comply with the e.i.r.p. limit; and . the maximum antenna gain permitted (for devices in the 5725-5825 MHz band) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, users should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. 26 Copyright © 2006 ADTRAN, Inc. 61700412E1-34A Index Numerics 10/100BaseT Ethernet interface 21 pinouts 25 installation 22 installing unit 22 interfaces 21 admin password 24 antennas 22 boot up 24 mounting options 22 connecting to unit 24 contents of shipment 19 customer service 9 default switch 24 passwords page 24 physical description 20 pinouts 10/100BaseT 25 power over ethernet 24 product registration 9 Ethernet interfaces LEDs 21 pinouts 25 rear panel 21 LEDs 20 shipping contents 19 specifications 18 factory default switch 24 features 18 front panel 20 getting started 24 wall mounting 23 warranty 9 web GUI passwords page 24 61700412E1-34A unpacking and inspecting the system 19 Copyright © 2006 ADTRAN, Inc. 27 NetVanta 150 Wireless Access Point ABG Hardware Installation Guide 28 Copyright © 2006 ADTRAN, Inc. 61700412E1-34A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2007:05:16 09:18:54+08:00 Create Date : 2006:07:21 14:50:31Z Page Count : 28 Page Mode : UseOutlines About : uuid:0a9b385f-b97c-4108-8d89-0084241a97ba Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2006:07:21 14:50:31Z Mod Date : 2007:05:16 09:18:54+08:00 Author : rpotts Creator Tool : FrameMaker 7.0 Metadata Date : 2007:05:16 09:18:54+08:00 Document ID : uuid:3edcc6b5-02fa-4a78-a1d7-1ddd8518bb95 Format : application/pdf Title : 61700412E1-1A.book Creator : rpotts Has XFA : NoEXIF Metadata provided by EXIF.tools