AEE Wireless Technology 870VL 2.4G Wireless Transceiver User Manual Users manual
Shenzhen AEE Wireless Technology Co., Ltd. 2.4G Wireless Transceiver Users manual
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 924250 |
| Application ID | MN5tx5xj06NlvBWeZtjJig== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 79.93kB (999087 bits) |
| Date Submitted | 2008-04-07 00:00:00 |
| Date Available | 2008-04-07 00:00:00 |
| Creation Date | 2008-03-31 10:15:15 |
| Producing Software | Corel PDF Engine Version 1.0.0.525 |
| Document Lastmod | 2008-03-31 10:15:15 |
| Document Title | 870VL-ä¸æ€§(带八木天线)USE MANUAL |
| Document Creator | CorelDRAW 12.0 版 |
| Document Author: | vincent |
English User's Manual 2.4GHz Wireless Transceiver Signal relay station Model:870VL Please read this manual thoroughly before any attempt to install and operate this product and retain it for your future reference. TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) Restrictions Maintenance 1~4 2~3 PRODUCT Package Contents Feature Locations Adapter 5~6 INSTALLATION & USAGE Installation Usage1 Usage2 Transfer approach Channel set Receiver Mode Setup Channel Setup 7~10 10 10 SPECIFICATIONS 11 TROUBLESHOOTING 12 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. INTRODUCTION Thank you for purchasing our car back view monitor. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The product is made of alloyed shell and special weather-proof enclosure that protect it against power and water sprays. It passed the IP65 testing. The product offers a new solution and experience for drivers. Drivers can check the back situations through the camera mounted on the rear car, and does not need to look back and forth. This product is only for accessorial reminding tool, thus we will not take any responsibility for resulting accident. Please read the manual thoroughly before using, and following the instruction accordingly. Notice Notice: This product may cause interferences with other wireless equipment that operates at 2.4GHz ISM band. Please turn off one of the equipments to eliminate the interference. Product Assurance: This camera will emit electromagnetic wave, just like other wireless products, however, its transmitting power is less than other wireless products such as mobile phones. The 2.4GHz wireless camera meets wireless frequency security standards and recommended indexes while working. These standards and indexes are certificated by academic organization and represent the cogitative research of the scientific workers who continuously explore and annotate the involved fields. So we believe that our products are safe for customers. Approval Information All our products meet the requirements of approval FCC or CE, and are granted the FCC or CE certification. They are authorized to bear FCC or CE mark. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Channel This equipment marketed in USA is restricted by firmware to only operate on 2.4G channel 1-11. CE This product complies with standards including Low Voltage Device Directive 2006/95/EC; EMC Directive 2004/108/EC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark. Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3. DO NOT use this product for any illegal activities. We will not be responsible for any consequences of illegal acts committed by the user. Maintenance 1. 2. 3. 4. 5. Ensure the sufficient ventilation space is available; Do not shake or strike the product; Keep it dry and dustless and avoid exposing it to direct sunlight; Do not place product near any magnetic objects; Avoid putting the product in places where the constantly changed temperature or humidity occurs; 6. Keep product away from heat sources such as electric heater; 7. Do not use the camera near aggressive chemicals; 8. Do not use this camera near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool and the like; 9. Do not use the camera in the places which are enclosed by metal. The surrounding metal like lifter, cabin, may shield the electromagnetic wave, and result in failure of signal reception; 10. Please obey the local government's environment protection policy; 11. Please turn off the power when left unused; 12. Do not disassemble or repair the camera or receiver; doing so might cause damages to the product. PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. ① 2.4GHz Wireless Repeater X 1 ② DC 8V Power Adapter X 1 ③ Antenna for the Transmitter X 2 ④ Antenna X 1 ⑤ Cable X1 ⑥ AV Cable X 1 ⑦ User ’s Manual X 1 ① ② ③ ④ ⑤ ⑥ Note: The picture may vary from the actual object. ⑦ Feature Locations Antenna Transmitter select Receive select Mode Control SMA Jack AV Output DC Power Socket Antenna Receiver Channel Indicator Transmitter Channel Indicator SMA Jack Adapter This product always conforms to the authenticated AC adapter. The adapter should be marked one of the following: UL Mark SAA Mark American power supply authentication Australia power supply authentication CE Mark PSE Mark European Union power supply authentication Japan power supply authentication GS Mark BS Mark German power supply authentication British power supply authentication Note: When using the power adapter, make sure the rating voltage is compatible with that of the device to avoid potential damages resulting from incorrect usage of power supply. INSTALLATION & USAGE Installation 1. Installing the transmitting antenna Fixed the antenna to the wall for suitable location with the screw. The antenna should be point to the camera. 2.Connect the antenna to Wireless Transceiver. Use the cable connect the transmitter and the antenna for picture two. Transmitter Receiver ② ① Note: Installing the antenna there are two ways. ① You can use the same antenna for the transmitter and the receiver of the transceiver ② You can use the different antennas for the transmitter and the receiver of the transceiver. 3.Connect the adapter to the receiver. USAGE 1 1.Connect the receiver to a monitor/TV with AV cable (yellow for video and red for audio.) 2.Power on the monitor/TV and select AV mode. USAGE 2 Locate the Transceiver between the Camera(ZT83T) and the receiver (ZT711). Note: 1. The ZT870VL’s receiver antenna should be point to the ZT823T’S transmitter antenna, and the ZT870VL’S transmitter antenna should be point to the ZT711’S receiver. 2. Recommended: From ZT823T to ZT870VL is 150m to 200m; From ZT823T to ZT 711 is up to 300m. ZT870VL ZT711 Receiver Transmitter ZT711 Transmitter ZT823T Transmitter ZT823T Receiver Receiver Transfer approach When use the Wireless Transceiver , recommended that: After installation ,connect the power, generally speaking, the “Ch1” indicator of the transmitter is on, and the “Ch4” indicator of the receiver is on. At this time, this is the best reception. However, you can also select the channel ,use “Ch4” of the transmitter and the “Ch1” of the receiver. Transmitter Receiver Transmitter Receiver Channe-scan Set 1. Manual mode: Slide Mode Control switch to M to enter Manual mode. In this mode, the receiver channel won’t change until you press the Channel Select Button; Transmitter Receiver 2. Channel Scan mode: Slide Mode Control switch to L to enter channel scan mode. In this mode, all the available channels will display one by one looping in turn per 5s.So you can watch the situations from up to 4 different cameras via one receiver. Receiver Mode Setup The receiver can support up to 4 cameras working at the same time. You are allowed to set the Mode Control as described below. The Mode Control has the precedence over other buttons. Channel Set ON: CH1 Enable (Default) OFF: CH1 Disable ON: CH2 Enable (Default) OFF: CH2 Disable ON: CH3 Enable (Default) OFF: CH3 Disable ON: CH4 Enable (Default) OFF: CH4 Disable You can confirm which channel is set to receive signal from corresponding camera. With this function, you could set the unused channels to OFF, so that they will be skipped during the Manual mode or Channel Scan mode. Note: If all channels are on OFF position, the default setting is CH1. 10 SPECIFICATIONS Transmission Frequency Work Transmission Modulation Type Color standard Voice standard Sound Control Sensitivity Transmission Power Unobstructed Effective Range Channel Select Channel Indicator Frequency Stability Receiving Sensitivity Video Output Impedance Video Output Level Audio Frequency Range Audio Output Impedance Audio Output Level SNR Audio AV Output Antenna Input RF Input Impedance Consumption Current Power Input Power Supply Operating Temperature Storage Temperature Storage Humidity Dimensions(W*D*H) 2,400~2,483MHz 2414MHz/2432MHz/2450MHz/2468MHz FM PAL/NTSC(AUTO) 6.5MHz 40dB(AGC Off) 7~10mW(Nominal value FCC:2mW CE:10mW) 100m(min) Pushbutton Switches choice LED -100KHz ≤ -85dBm 75ohm 1.0 + - 0.2Vp-p(Nominal value 1Vp-p) 100~20KHz 10kohm 1.2 + - 0.4Vp-p(Nominal value 1Vp-p) 50dB Φ3.5mm (AUDIO+VIDEO) SMA 50ohm 260mA(Max.) Φ3.5mm 8V/300mA -10 C~+50 C/-14 F~122 F -20 C~+60 C/-4 F~140 F 85% 156mm*68mm*19mm(MAINBODY) *Actual transmission range may vary according to the weather, location, interference and building construction. *All the specifications are subject to minor change without prior notice. 11 TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image No sound No image Noisy Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. Check wether the li-battery runs out Snowflakes on image Noisy 1. Check if the channel of receiver is the same as that of camera; 2. Check the distance & blocks. 1. Interfered with other devices; 2. Check the distance & blocks. Ghost image Normal sound Mismatching the TV system of PAL or NTSC. No color Normal sound Interfered with other devices nearby; Remove or turn off such devices. Normal image Noisy 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 14 Create Date : D:20080331101515 Modify Date : D:20080331101515 Producer : Corel PDF Engine Version 1.0.0.525 Author : vincent Creator : CorelDRAW 12.0 版 Title : 870VL-中性(带八木天线)USE MANUALEXIF Metadata provided by EXIF.tools