AEE Wireless Technology BT502 Wireless Camera User Manual S M502G190011 502UA OM OM final
Shenzhen AEE Wireless Technology Co., Ltd. Wireless Camera S M502G190011 502UA OM OM final
Users Manual Rev 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 703550 |
| Application ID | m/6Q675fIVDC64iKISOodQ== |
| Document Description | Users Manual Rev 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 147.07kB (1838371 bits) |
| Date Submitted | 2006-09-11 00:00:00 |
| Date Available | 2006-09-12 00:00:00 |
| Creation Date | 2006-08-29 10:50:18 |
| Producing Software | Corel PDF Engine Version 1.0.0.525 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | S-M502G190011_502UA_OM-ä¸æ€§OM final |
| Document Creator | CorelDRAW 12.0 版 |
| Document Author: | aee |
User's Manual 2.4GHz Color Wireless Camera Kit MODEL: Bt502 Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. TABLE OF CONTENTS INTRODUCTION 1~3 Notice Approval Information (FCC/CE) Restrictions Maintenance 1~2 PRODUCT Package Contents Feature Locations Adapter PC System Requirement Main Functions PREPARATION Fix the Camera Camera Channel Setup Software Installation ACCESS YOUR CAMERA VIA PC Access Your Camera Operation Bar 4~7 8~13 9~13 14~18 14~15 16~18 PARAMETERS SETUP WINDOW 19~25 Menu Security Setup Display Setup Alarm Setup Record setup Capture setup Plan task setup 19 20 21 22 23 24 25 SPECIFICATIONS 26 TROUBLESHOOTING 27 INTRODUCTION Thank you for your interest and support to our product and purchase this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera builds in one CMOS image sensor and one transmitting module transmits the captured image wirelessly. Notice Notice: 2.4GHz wireless camera works at ISM band. It may cause interference with other wireless equipment that operates on the same band. Please turn off that equipment to eliminate the interference. Product Assurance: 2.4GHz wireless camera will emit electromagnetic wave, just like other wireless products. But the output power of this products is less than other wireless products such as mobile phones. The 2.4GHz wireless camera meets wireless frequency security standards and recommended indexes while working. These standards and indexes are certificated by academic organization and represent the cogitative research of the scientific workers who continuously explore and annotate the involved fields. So we believe that our products are safe for customers. Approval Information All our products meet the requirements of approval FCC or CE, and obtained the FCC or CE certification. They are authorized to bear FCC or CE mark. FCC Infor mation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes and modification not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules. CE This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark. Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3. DO NOT use this product for any illegal activities. AEE Technology shall not be responsible for any consequences of illegal acts committed by the user. Maintenance 1. 2. 3. 4. 5. Ensure the sufficient ventilation space is available; Do not shake or strike the product; Keep it dry and dustless and avoid exposing it to direct sunlight; Do not place product near any magnetic objects; Avoid putting the product in places where the constantly changed temperature or humidity occurs; 6. Keep product away from heat sources such as electric heater; 7. Do not use the camera near aggressive chemicals; 8. Do not use this camera near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool and the like; 9. Do not use the camera in the places which are enclosed by metal. The surrounding metal like lifter, cabin, may shield the electromagnetic wave, and result in failure of signal reception; 10. Please obey the local government's environment protection policy; 11. Please turn off the power when left unused; 12. Do not disassemble or repair the camera or receiver; doing so might cause damages to the product. PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. ① 2.4GHz wireless camera ×1 ② Antenna for camera ×2 ③ 2.4GHz wireless receiver ×1 ④ Adapter for camera ×1 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑤ USB cable ×1 ⑥ Mounting hardware × 1 ⑦ CD-ROM ⑧ User's Manual × 1 Note: The pictures may vary from the actual objects. Feature Locations 1. Camera Antenna IR Lights Lens PIR Sensor MIC Hole Power switch Power LED Channel switch DC Power jack 2. Receiver Antenna USB socket Blowhole CH 1 CH 2 CH 3 Channel Indicator CH 4 Adapter This product always conforms to the authenticated AC adapter. The adapter should be marked one of the following: UL Mark SAA Mark American power supply authentication Australia power supply authentication CE Mark PSE Mark European Union power supply authentication Japan power supply authentication GS Mark CCC Mark German power supply authentication China power supply authentication Note: When using the power adapter, make sure the rating voltage on it is compatible with that of the device to avoid potential damages resulting from incorrect usage of power supply. PC System Requirement The PC must meet the following technical specifications for the devices to work properly. 1. CPU: 2.0 GHz or higher 2. RAM: 256MB or more 3. Color Monitor: Suggest at least 1024 * 768 4. OS(Operating System): Windows XP 5. Hardware disk: 30G or more 6. USB interface: Support USB 2.0 interface 7. Audio/Video card: Support DirectX 9.0 or later 8. DirectX 9.0 Note: The wireless camera kit comes with setup CD-ROM, suggest the CD-ROM drive available to install the CameraViewer. Main Functions Instant Watch The 502UA does instant watch for what is happening. It is easy to install and operate CameraViewer, an application program for surveillance. You can record movie and capture still pictures with software CameraViewer after easy configuration. Alarm Function It refers to the alarm against PIR Motion and Sound. Both can trigger the alarm. The monitoring image can be displayed on CameraViewer. Night Vision The built-in Infra-red lights in camera provide night vision for 24hours surveillance. The Infra-red lights will be automatically activated in dark places. The picture will turn to Black & White (monochrome) in Night Vision status. Built-in IR lights for Night Vision PREPARATION Fix the Camera The camera can stand on table, it also can be mounted onto the wall. The steps of installation are as follows: 1. Drive one hole in the wall. Insert one mounting anchor firmly. Insert a screw into the mounting anchor. Hang your camera on the screw. 2. Connect the camera to the adapter. Turn on the camera by sliding the power switch to ON position. The power indicator lights up. Camera Channel Setup The channel switch is marked with 1-2-3-4. Any one of them can be selected to meet the purpose of the multi-camera working and possible interference avoidance. CH1=2,414MHz CH2=2,432MHz CH3=2,450MHz CH4=2,468MHz Software Installation Insert the software CD into the CD-ROM drive of the PC. This will launch the UR401 Setup installation wizard. 1. Install UR401 USB driver 2. Install Camera Viewer 3. Install MPEG4 codec 1. Install UR401 USB driver 1.1 Click on Install UR401 USB driver to install the driver. 1.2 Click Continue Anyway to install driver. 2. Install CameraViewer 2.1 Select language per your request from the down-list box. And then click OK. 2.2 Click Next to continue. 10 2.3 Fill in the boxes with your personal or public information. Click Next to continue. 2.4 Click Next to continue. You can click Change... to select a destination folder to install CameraViewer software per your request, and then click Next to continue. 11 2.5 Click on Install to install CameraViewer. 2.6 Click on Finish to finish the installation. The icon CameraViewer will be created on the desktop. 12 3. Install MPEG4 codec 3.1 Click on Install MPEG4 codec to install the MPEG4 codec. The following interface will pop up. Select a language per your request from the down-list box. Then click OK. 3.2 Follow the installation wizard to install MPEG4 codec. Finally click Finish. Connect the receiver to your computer with USB cable. Refer to [My Computer]/[Hardware]/[Device Manager]/ [Sound,video and game controllers] to check if the Trident Analog Video correctly installed. If you cannot find this device or there is a yellow "!" before the device, please unplug the receiver and re-plug it. Congratulations! Now you can use the application program to monitor what you want. 13 ACCESS YOUR CAMERA VIA PC Access Your Camera 1. Connect the camera to the adapter (DC 8V 300mA). Turn on the camera by sliding the power switch to ON position. The power indicator lights up. Notes: This camera can also work on dry battery , please load three AAA batteries to the battery compartment at the bottom of camera with their polarities matched, and then slide the power switch to ON position, the power indicator lights up. The DC adapter will work instead of batteries after it is plugged. If the camera is left unused for a long period of time, please unplug the adapter and remove the batteries. 2. Connect the antenna to the receiver. 14 3. Connect the receiver and your PC with USB cable. One of the channel LED lights up green. Now you can watch on your PC with the CameraViewer . 4. After the connection, double-click on CameraViewer icon your desktop. The following interface will be shown. on Channel of present monitoring camera Operation Bar Present date and time Setup MENU Image Field 5. Rotate the camera to a suitable angle for surveillance. 15 Operation Bar Channel buttons Channel on/off Channel loop on/off Mute button Volume slide block Split screen Pause Snapshot button Record Zoom in Zoom out Full screen IR detection on/off Sound detection on/off Schedule mission on/off IR detection configuration Sound detection configuration Record File Management Schedule mission configuration 16 Channel buttons: CH1,CH2,CH3,CH4 Click the right channel button to monitor image transmitted from the corresponding channel camera. Note: You can also press space key on your keyboard to select channel from CH1~CH4 in turn. Four channels to avoid interference: CH1=2,414MHz, CH2=2,432MHz, CH3=2,450MHz, CH4=2,468MHz Channel loop button Click the channel loop button to start looping available channels. Click channel loop button again to stop looping. Channel on/off buttons Click the channel on/off button to enable/disable the channel. Mute button Click the Mute button to turn off the sound. When the sound is on, slide the volume slide block horizontally to adjust the volume. Split screen button Click the split screen button to switch between single window and four windows display. The single window for one channel and four windows for four channels. Snapshot button Click the snapshot button to take a snapshot. Refer to page 24 for more details. Record button Click the record button to start recording. Refer to page 23 for more details. Zoom in/Zoom out Click zoom in button to magnify the image and zoom out to return to the normal size. Zoom in 2×, 3×, 4× 17 Full screen button Click full screen button to display image in full screen. Double-click on the image field to return display to the normal size. Note: you can double-click on the image display area to switch between full screen and normal view. Alarm settings PIR alarm Motion detected by the camera will trigger the alarm. The effective distance is 7~10m depending on different temperature. Click the IR detection button to enable the PIR alarm trigger. Click again to disable the alarm. Refer to page 22 for more details. Sound alarm Sound above 50dB detected by the camera will trigger the alarm. 3m is the effective distance for surveillance. Click the Sound detection button to enable the sound alarm trigger. Click again to disable the alarm. Refer to page 22 for more details. Schedule mission Click the schedule mission button to enable schedule mission. The plan task starts to execute assignment according your settings. Click again to disable the schedule mission. Refer to page 25 for more details. You can set up configuration for the three alarm trigger by clicking the following three buttons: IR detection configuration, Sound detection configuration, Schedule mission configuration. The recording files can be found by clicking Record File Management. 18 PARAMETERS SETUP WINDOW Click MENU button, the follow interface is shown. Click any item to enter the parameters setup window. 19 Security Setup 1. Check the "Enable password on startup", and then type a password in the Password box. Re-type the password to confirm it. 2. Click OK to confirm your setting. 3. If you exit the CameraViewer window and re-enter, the following interface will pop up. Type the password you set in step 1, you can enter the CameraViewer window. 20 Display Setup [Camera Alias] Aliases can be made to different cameras. For example, make baby room as an alias to camera in channel 1. [Channel Loop] Set the interval of automatic loop. [On Screen Display] Three options can be selected to display on CameraViewer window: Date, Time, channel & name of the camera you are accessing. [Video Adjustment] Standard: Select PAL or NTSC to match your camera standard. The mismatch may cause faulty image display. Brightness: Slide the slide block to adjust the image brightness Sharpness: Slide the slide block to adjust the image sharpness Contrast: Slide the slide block to adjust the image contrast Saturation: Slide the slide block to adjust the image saturation Note: Clicking Default will reset the Video Adjustment parameter except Standard to default settings. 21 Alarm Setup [Alarm setup] 1) Select the camera from which you want to receive alarm. 2) Select the alarming type by checking Open move alarm or Open sound alarm you like. Note: Open move alarm will trigger the alarm while open sound alarm will trigger the alarm. [Operating of alarm] This is the countermeasure to alarm, warning you something unpleasant happening. When the camera alarms: Record: Enable the recording type when alarm is triggered. Under record mode, CameraViewer will record and store video files for future reference. Capture: Enable the capturing type when alarm is triggered. CameraViewer will take and store still pictures for future reference. Play alarm sound: Play alarming sound type when alarm is triggered. [Record strategy of alarm] You can set duration and frame rate of the recording files. Note: For NTSC the max. frame rate is 30fps, while for PAL it is 25fps. [Capture strategy of alarm] You can set the time when to capture a photo after the alarm is triggered. 22 Record setup [Record File Path] Click Change to select the location in which you want to save the record file. [Record File Setup] Compression: MPEG4 File Format: AVI Image Size: Three image size per your request: 720*576, 352*576, 352*288(PAL); 720*480, 352*480, 352*240 (NTSC). Frame rate: 5,10,15,20,25fps (PAL); 5,10,15,20,25,30fps (NTSC) [Storage Strategy] Set the limited size for total storage and single file. [Take following operation when total file size limit reached] Set the processing method to the situation of reaching the limitation 23 Capture setup [Picture Path] Click Change to select the location in which you want to save the captures. [Picture Format] Compression: JPG Image Size: Three image size per your request: 720*576, 352*576, 352*288(PAL); 720*480, 352*480, 352*240 (NTSC). [Storage Strategy] Set the limited size for total storage of captured pictures. [Take following operation when total file size limit reached] Set the countermeasure to the situation of reaching the limitation 24 Plan task setup The list of CHx, Timing, Operation displays your setup of plan task. [Task Strategy] Set the alarming frequency: daily alarm, weekly alarm, monthly alarm or alarm only once. [Timing] Scheduled record time [Operation] Set the duration for recorder video or set the duration and frequency of capturing still pictures. [Channel] Apply the above settings to the channel you select. 1. Click New to start to set a schedule. 2. Set the Task Strategy, Timing, Operation and Channel, then click Add to confirm your settings. 3. You can select one task and click Delete button to delete it. Click OK to confirm all your settings about security, display, alarm, record, capture, plan task. 25 RECEIVER CAMERA SPECIFICATION Imaging Sensor CMOS Total Pixels View Angle Minimum Illumination Transmission Frequency Transmission Power Modulation Type Bandwidth Power Supply Motion Detection Distance Motion Detection Angle Sound Control Sensitivity Consumption Current Unobstructed Effective Range Night Vision Range Dimensions(W × D × H) Weight Receiving Frequency Intermediate Frequency Demodulation Type Receiving Sensitivity Transmission Interface Dimensions(W × D × H) Weight Operating Temperature Storage Temperature CMOS 628 × 582(PAL);510 × 492(NTSC) 55o 5Lux/F1.2(IR OFF) & 0Lux(IR ON) ISM 2,400MHz~2,483MHz 10mW/CE; 2mW/FCC FM 18MHz DC 8V 300mA 8m Horizontal:120o; Vertical:-15o~+25o >50dB 180mA & 230mA(IR ON) 100m 5m 85 × 109 × 111(mm) 170g ISM 2,400MHz~2,483MHz 480MHz FM ≤ -85dBm USB 2.0 105 × 22 × 69(mm) 91g 0 oC~+50 oC/+32 oF~+122 oF -20 C~+60 C/-4 oF~+140 oF 85%RH Operating Humidity *Channel Frequency: CH1=2,414MHz; CH2=2,432MHz; CH3=2,450MHz; CH4=2,468MHz. *All the specifications are subject to minor change without prior notice. 26 TROUBLESHOOTING If the PC Camera is not working properly, these suggestions might help you eliminate the problem. If is still does not help, take it to your local retailer for assistance. Problem Cause and Remedy Forget the password to access the setting interface. You need to remove the CameraViewer software and and re-install it. No image displays at present channel. 1. Make sure at least one channel is ON. 2. Signal is weak. Relocate the camera or remove the obstacle around it. 3. It may be interfered by other microwave product such as microwave oven. Turn off the interfering source. The color of the picture is strange. Set the color setting of PC as 16 bits or more. Wireless communication does not work. Check if your receiver the same channel with that of your camera. It shows black and white or the image flashes. Your receiver is not set the same video system as your camera. Refer to page 21 for more details The alarm does not work. Make sure the alarm function is set up(Refer to page 22 for more details), and is activated by clicking IR detection button/Sound detection. The unreadable characters are displayed. 1. Make sure the language of CameraViewer software is the same as that of your PC operating system. 2. Set the Encoding or the Character Set of the selected language on the web browser. The playing time of movie is much shorter than recording time. Your computer cannot afford that frame rate, please set lower frame rate when you record. S-M502G190011
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.525 Mod Date--Text : Format : application/pdf Creator : aee Title : S-M502G190011_502UA_OM-中性OM final Creator Tool : CorelDRAW 12.0 版 Modify Date : 2006:09:08 13:06:29+08:00 Metadata Date : 2006:09:08 13:06:29+08:00 Document ID : uuid:a2b305b8-35be-4a69-a0cf-ab104206c4e8 Instance ID : uuid:037dbd79-643f-4764-9286-d3ebb52055ff Page Count : 32 Create Date : D:20060829105018 Author : aeeEXIF Metadata provided by EXIF.tools