ALANGO TECHNOLOGIES ABH-101 BeHear Now User Manual
ALANGO TECHNOLOGIES, LTD. BeHear Now
Contents
- 1. User Manual
- 2. user manual
User Manual
1. Package Contents 2. Headset Charging Port micro-USB Headset Silicon ear tips (3 pairs) USB charging cable Silicon ear hooks (3 pairs) Travel pouch Wind protection covers x2 button Ear Buds Right Hand Control Box: Personal hearing controls Left Hand Control Box: Call/Audio controls 8. Handling Phone Calls 9. Audio Play Use the left-hand control box on the headset to handle phone calls: Answer incoming calls with a short press on . End the call with another short press on . Reject an incoming call with a long press on . Increase call volume by pressing and decrease it by pressing . Use the left-hand control box on the headset to handle audio play: Toggle Play/Pause with a short press on . Increase audio volume by pressing and decrease it by pressing . EasyListen™ – Slow Down Incoming Speech You can slow down incoming phone speech, making it more intelligible. Enable EasyListen and adjust speech tempo using the W&H app (downloadable from Google Play Store or Apple Store). Power ListenThrough™ – Stay Safe & Alert Function Enjoy audio content while staying aware of important ambient sounds. During audio play, a long press on in the right-hand control box toggles the ListenThrough function on/off. Short presses on gradually increase volume of ambient sound, while short presses on decrease it. 3. Charging the Battery 4. Pairing with Bluetooth® The BeHear battery should be charged before using it for the first time. Charging via Computer’s USB Port A. Plug larger end of supplied cable into a computer’s USB port. Continue to step B, below. Charging via AC Outlet A. Plug larger end of supplied cable into a standard AC outlet USB charger adapter (sold separately) and insert the adapter into an AC outlet. B. Plug cable’s smaller end into the Micro USB port located in the BeHear neck band. C. The LED is yellow during charging, and green when BeHear is fully charged. A full charge will be achieved after ~ two hours. To be used as a Bluetooth headset BeHear must be paired with a Bluetooth device, e.g., a mobile phone. Pairing Using Bluetooth Device LED 1. Make sure BeHear headset is off. 2. Press on headset for up to 5 seconds, until LED alternates red/blue to enter pairing mode. Power button 3. Use the Bluetooth device’s setup program. The headset will be identified as Alango BeHearTM. Pairing Using BeHear App 1. Download the W&H BeHear app from the Google Play Store or Apple Store. 2. Launch the app and follow the prompts. 10.Hardware: Hardware: Right-Hand Right-Hand Control Box 10. Control Box 11.Hardware: Hardware: Left-Hand BoxBox 11. Left-HandControl Control PersonalHearing HearingControls Controls Personal Mode Ambient Hearing Mode Ambient Hearing ListenThrough™ ListenThrough™ (during audio play) (during audio play) Volumeup up Volume (short presses) (short presses) Ambient sound volume Ambient sound volume up (short presses) up (short presses) Amplification On/Off On/Off Amplification (longpress) press) (long Scrollthrough through profiles profiles Scroll (shortpress) press) (short On/Off (long press) On/Off (long press) Ambientvolume volume down down Ambient (shortpresses) presses) (short Ambient sound volume Ambient sound volume down presses) down(short (short presses) Call/Music/Audio Controls Call/Music/Audio Controls Phone Call Call Mode Phone Mode Music/Audio Music/Audio Volume up up Volume Volume up up Volume Callanswer answer (short Call (shortpress) press) Callend end (short (short press) Call press) Callreject reject (long Call (longpress) press) Play/pause Play/pause Volume down down Volume Volume down Volume down 5. Wearing Recommendations 1. 2. 3. 4. Place neck band behind neck. Insert ear buds into ears. Tuck ear hooks into ears. Shorten cables by folding them back into clips (optional). 5. When not in use, secure ear buds to each other with built-in magnets. Ear hook Left/Right indication Ear tip Cables in clips Magnetized ear buds 12.Headset Headset LED LED 12. Thislight lightindicates indicates power power This and hearing states. and hearing states. Indication Indication • Red/bluealternating alternating • Red/blue • Yellow,steady steady • Yellow, • Green,steady steady • Green, • Red,blinking blinking • Red, If unitisison, on,press press • If• unit • Green • Green • Yellow • Yellow • Red,blinking blinking • Red, • Yellow,blinking blinking • Yellow, State State •• Bluetooth Bluetoothpairing pairing •• Charging Charging •• Battery Batteryfully fullycharged charged •• Battery Batterylow low •• Battery Batterylevel: level: •• good good>>50% 50% •• fair fair<<50% 50% •• low charging!) low<<10% 10%(needs (needs charging!) •• Hearing Hearingfunction functionactive active 6. Ear Fittings 7. Personal Hearing Amplification Your BeHear device comes with three sets of silicon ear tips and ear hooks of varying sizes. If the default set does not fit snugly and comfortably, remove the silicon covers from the ear buds and try different options. It is recommended to do this one at a time, to avoid confusion between right and left: Your BeHear device operates as a Personal Hearing Amplifier (no Bluetooth needed). Toggle hearing on/off with a long press on Short presses on the and will increase and decrease the volume, respectively. Scroll through pre-defined hearing profiles: Indoor, Outdoor, Crowd or Live Music with a short press on . A tone will play for each switched profile. Use the W&H BeHear app to customize hearing based on your preferences and capabilities. Download the app from the Google Play Store or Apple Store. Launch the app and follow the prompts. A. Peel off default ear tip and hook C. Place new ear tip over microphone B. Place hole of new ear hook over ear bud microphone D. Add wind protection covers (optional) 13. ng 13.Troubleshoo Troubleshoo ng Problem Problem NoNosound sound Wind Windnoise noise Ambient Ambientnoise noise too tooloud loud Uncomfortable Uncomfortable ear earbuds buds Phonecalls callsor or Phone musicnot notrouted routed music BeHear toto BeHear Sugges on on Sugges ery level (Secn 11) n 11) Verifybabaery level (Sec •• Verify Adjustvolume volume level •• Adjust level (Sec(Secn 6)n 6) Checkear earcaps caps debris •• Check forfor debris Usesupplied suppliedwind wind protecn covers n covers Use protec (Sec nn6)6) (Sec ReduceListenThrough ListenThrough transparency Reduce transparency (Sec nn9)9) (Sec Experimentwith with different Experiment different ear ear ps ps andear earhooks hooks (Sec n 6)n 6) and (Sec Verify pairing (Sec(Secn 4) n 4) VerifyBluetooth Bluetooth pairing Quick Start Guide (for detailed, visual instructions visit our Web site) www.WearAndHear.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 2 Create Date : 2017:09:26 10:03:13 Creator : PDFium Producer : PDFiumEXIF Metadata provided by EXIF.tools