AMPAK Technology WSDT752BSC BLE SiP User Manual Manual

AMPAK Technology Inc. BLE SiP Manual

Manual

 兆福科 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information     兆福科技股份有限公司       SPECIFICATION  SPEC. NO.:  REV:      2.0  DATE:  2018, July.-16  PRODUCT    NAME:  WSDT-752B_SC            APPROVED  CHECKED  PREPARED  DCC ISSUE NAME
                  Gigafu Technology Inc.  http://www.gigafu.com.tw/    Proprietary & Confidential Information     GIGAFU  WSDT-752B_SC ARM Cortex M3 + Bluetooth Low Energy with Antenna Module  Product Specification Sheet
                  Gigafu Technology Inc.  http://www.gigafu.com.tw/ Proprietary & Confidential Information          i May-14/2018   Revision History                 Date  Revision Content  Revised By Version 2015/03/31  -  Original release    R & D  1.0 2015/07/08 -  Modify voltages ratings -  Add power consumption -  Replace outline dimension Ander  1.1 2015/07/08  -  Modify RF Specification  May  1.2 2015/07/13  -  Add Antenna keep out area size Ander  1.3 2015/09/09  -  Update Operating Temperature -  Update Power Consumption  Ander  1.4 2015/10/21  -  Modify 7.1 schematic  Peter  1.5 2015/11/04    -    Renamed Peter  1.6 2015/12/30  - Modify temperature of operation and storage  Peter  1.7 2018/05/14  -  Modify General Specification  Geoffrey  1.8 2018/07/12  -  Add FCC/IC Statement  Geoffrey  1.9 2018/07/16  -  Add Label Drawing  Geoffrey  2.0
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          ii May-14/2018      Contents Revision History........................................................................................................ i Contents ................................................................................................................... ii 1. Introduction.......................................................................................................... 1 1.1 DESCRIPTION......................................................................................................................1 1.2 APPLICATIONS....................................................................................................................1 2. FEATURES............................................................................................................ 2 3. General Specification .......................................................................................... 4 3.1 General Specification ..........................................................................................................4 3.2 Voltages ...............................................................................................................................4 3.2.1 Absolute Maximum Ratings .......................................................................................4 3.2.2 Recommended Operating Ratings ............................................................................4 3.3 Power Consumption............................................................................................................5 3.3.1 BLE Power Consumption...........................................................................................5 4. Main CPU Overview ............................................................................................. 6 4.1 CM3 Features.......................................................................................................................6 5. RF Specification................................................................................................... 7 5.1 BLE Specification ................................................................................................................7 6. Ceramic Chip Antenna Specification ............................................................... 10 6.1 Description Value .............................................................................................................. 10 7. Pinout Information ............................................................................................. 11 7.1 Schematic Diagram ........................................................................................................... 11 7.2 Pin Descriptions ................................................................................................................ 11 7.3 Pin Number Define.............................................................................................................13 8. Software Overview............................................................................................. 14 8.1 Software tool installation...................................................................................................14 8.2 WSDT-752B_SC board GPIO configuration file path........................................................ 14 8.3 PIN define in header file Board.h ......................................................................................14 9. Module Dimensions ........................................................................................... 15 9.1 Outline Dimension      (Unit: mm) ......................................................................................15 9.2 Recommended Footprint      (Unit: mm)............................................................................ 18
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          iii May-14/2018   10. Recommended Reflow Profile ........................................................................ 19 11. Label Drawing................................................................................................... 20 12. Packing Information ........................................................................................ 21 12.1 Packing Dimension..........................................................................................................21 13.Statement........................................................................................................... 22 13.1 FCC Statement:................................................................................................................ 22 13.2 ISED Statement:...............................................................................................................22 13.3 FCC Label Instructions.................................................................................................... 23
                  Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          1 May-14/2018   1. Introduction GIGAFU Technology would like to announce a low-cost and low-power consumption module which has of the BLE functionalities. The highly integrated WSDT-752B_SC with RF front end BLE module makes the possibilities of Bluetooth Low Energy HID and other applications.    1.1 DESCRIPTION   The WSDT-752B_SC is very low active and low power mode current consumption as well as fast mode transitions provide excellent battery lifetime and allows operation on small coin cell batteries and in energy harvesting applications.   Integrated a powerful 32-bit Cortex M3 running at 48 MHz has more than 30% more processing power per MHz than Cortex M0 based systems and significantly more than 8 and 16-bit processors.   The Bluetooth Low Energy Controller is embedded into ROM and are partly running on a separate ARM Cortex M0 dedicated for radio purpose. This improves overall system performance and power consumption as well as frees up FLASH memory for the application.  1.2 APPLICATIONS    Consumer electronics    Mobile phone accessories    Sports & Fitness equipment    HID applications    Home Automation and Lighting Control    Alarm and Security    Electronic Shelf Labeling    Proximity Tags    Medical and Healthcare  Remote Controls    Wireless Sensor Networks
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          2 May-14/2018   2. FEATURES  Lead Free design which is compliant with RoHS requirements.  Integrated Ceramic Chip Antenna  Integrated Power Inductor 10uH for DC/DC converter  - 2.4 GHz RF transceiver compatible with Bluetooth 4.2 low energy and proprietary communication protocols    - Programmable GFSK modulation mode.    - Supports data rates between 50 kbps and 5 Mbps    - Programmable output power up to +5 dBm    - Suitable for systems targeting compliance with worldwide radio frequency regulations    - All Digital Peripheral Pins can be Routed to any GPIO  - 4 General-purpose Timer Modules (8x 16-bit or 4x 32 bit-timer, PWM each)    - 12-bit ADC, 200-ksamples/s, 8 channel analog MUX    - Continuous Time Comparator  - Ultra-low-power analog comparator  - Programmable Current Source  - UART    - SPI    - I2C    - I2S    - 10 GPIO  - True Random Number Generator (TRNG)  - Real-time clock    - AES-128 security module    - Support for 8 capacitive sensing channels  - Integrated Temperature Sensor  - Very few external components    - Low-speed clock can be derived from high-speed crystal
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          3 May-14/2018   System Block Diagram
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          4 May-14/2018   3. General Specification 3.1 General Specification  3.2 Voltages 3.2.1 Absolute Maximum Ratings Symbol  Description  Min.  Max.  Unit VDDS  Module Voltage  -0.2  4.0  V VDDS2  Module Voltage  -0.2  4.0  V VDDS_DCDC  Module Voltage  -0.2  4.0  V   3.2.2 Recommended Operating Ratings Test conditions: At room temperature 25°C   Symbol  Min.  Typ.  Max.  Unit VDD  2.16  3.3  3.465  V Model Name  WSDT-752B_SC Product Description    BLE module Dimension  10.0 mm x 10.0 mm x 1.5 mm (W*L*T)   Operating temperature  -10°C to +65°C Storage temperature  -20°C to +85°C Humidity  Operating Humidity 10% to 80% Non-Condensing   Storage Humidity 5% to 95% (Non-Condensing) Weight  0.023 g    +/- 10g
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          5 May-14/2018    3.3 Power Consumption   3.3.1 BLE Power Consumption Test conditions: TX mode @VDD=3.3V;    Temp=25°C Current@VDD    Test at 25℃/3.3V (Default FW@ROM)  Power Mode  Description Current (Peak ) Initialize    DUT link to Smart RF Studio    2.7mA   Tx Continuous  Transmit Packet Continously@1.82dBm  8.1mA   Rx Continuous  Receive Packet Continuously    7.2mA   Tx Packet    Transmit Packet to Golden Sample    3.5mA   RX Packet    Receive Packet From Golden Sample    7.5mA   238uA   Broadcast   After Press Reset Button ,enter   advertising state    for 10 sec then enter Standby Mode(Specific FW)   10uA 1.4uA (Typical)      Deep Sleep mode (timer on)    3.3V  Typ.  Max.  Unit Broadcast  --  238  uA Srandby Mode  1.4  10  uA
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          6 May-14/2018   4. Main CPU Overview The WSDT-752B_SC contains an ARM® Cortex™ M3 (CM3) 32-bit CPU, which runs the application and protocol stack in the product, and the protocol stack in the wireless network processor (WNP) products.   4.1 CM3 Features    32-bit ARM Cortex-M3 architecture optimized for small-footprint embedded applications    Outstanding processing performance combined with fast interrupt handling    Thumb®-2 mixed 16- and 32-bit instruction set delivers the high performance expected of a 32-bit ARM core in a compact memory size usually associated with 8- and 16-bit devices, typically in the range of a few kilobytes of memory for microcontroller-class applications:    –Atomic bit manipulation (bit-banding), delivering maximum memory use and streamlined peripheral control    –Unaligned data access, enabling data to be efficiently packed into memory    Fast code execution permits slower processor clock or increases sleep mode time    Harvard architecture characterized by separate buses for instruction and data    Efficient process core, system and memories    Hardware division and fast digital-signal-processing oriented multiply accumulate    Saturating arithmetic for signal processing    Deterministic, high-performance interrupt handling for time-critical applications    Enhanced system debug with extensive breakpoint and trace capabilities    Serial wire trace reduce the number of pins required for debugging and tracing    Migration from the ARM7™ processor family for better performance and power efficiency    Optimized for single-cycle flash memory use    Ultra-low power consumption with integrated sleep modes    48 MHz operation – the operating frequency can be dynamically altered to minimize power requirements.    1.25 DMIPS / MHz
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          7 May-14/2018   5. RF Specification 5.1 BLE Specification 1 Mbps GFSK (Bluetooth low energy)   Conditions : VDD=3.3V ;    Temp:25°C. Using Anisu CombiTest with MT8852B   TX Output Power TX PARAMETER  limit  MIN    TYP    MAX    UNIT  Output power @2402MHz >-20 <+10    0.92  2.4  dBm Peak to Average Power @2402MHz  <3dB    0.14    dB Output power @2440MHz >-20 <+10    0.74    dBm Peak to Average Power @2440MHz  <3dB    0.13    dB Output power @2480MHz >-20 <+10    0.39    dBm Peak to Average Power @2480MHz  <3dB    0.14    dB Carrier Frequency Offset and Drift TX PARAMETER  limit  MIN    TYP    MAX    UNIT  Frequency Offset @2402MHz  ≦±150 kHz -0.9  5.7  10.6  KHz Drift Rate / 50 µs @2402MHz ≦20 kHz / 50 µs    10.65    KHz Max Drift @2402MHz  ≦50 kHz    -10    KHz Frequency Offset @2440MHz  ≦±150 kHz 2.5  6.5  9.9  KHz Drift Rate / 50 µs @2440MHz ≦20 kHz / 50 µs    -7.37    KHz Max Drift @2440MHz  ≦50 kHz    -7    KHz Frequency Offset @2480MHz  ≦±150 kHz -0.2  5.1  7.1  KHz
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          8 May-14/2018   Drift Rate / 50 µs @2480MHz ≦20 kHz / 50 µs    -8.85    KHz Max Drift @2480MHz  ≦50 kHz    -11    KHz Modulation Characteristics TX PARAMETER  limit  MIN    TYP    MAX    UNIT  F1avg @2402MHz 225 kHz < F1avg < 275 kHz   252  263  KHz F2max @2402MHz  >= 185 kHz   201    KHz 'F2max' Pass Rate @2402MHz  > 99.9 %    100    % F1/F2 ratio @2402MHz  >= 0.80    20     F1avg @2440MHz 225 kHz < F1avg < 275 kHz   261.2  271.4  KHz F2max @2440MHz  >= 185 kHz   214.4    KHz 'F2max' Pass Rate @2440MHz  > 99.9 %    100    % F1/F2 ratio @2440MHz  >= 0.80    20     F1avg @2480MHz 225 kHz < F1avg < 275 kHz   262  273.7  KHz F2max @2480MHz  >= 185 kHz   210    KHz 'F2max' Pass Rate @2480MHz  > 99.9 %    100    % F1/F2 ratio @2480MHz  >= 0.80    20
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          9 May-14/2018   RX Receiver sensitivity(Power Level: -90.0 dBm, Dirty Tx Status: On) RX PARAMETER  limit  MIN    TYP    MAX    UNIT  Frame Error Rate@2402MHz  <= 30.800 %   12.6    % Frame Error Rate@2440MHz  <= 30.800 %   21.07    % Frame Error Rater @2480MHz  <= 30.800 %   14.74    % PER Report Integrity(Power Level: -30.0 dBm, Packet Number Mode: Random) RX PARAMETER  limit  MIN    TYP    MAX    UNIT  Frame Error Rate@2402MHz 50.0 % <= PER <= 65.4 %   50.4   % Frame Error Rate@2440MHz 50.0 % <= PER <= 65.4 %   50.4   % Frame Error Rate@2480MHz 50.0 % <= PER <= 65.4 %   50.3   % Maximum Input Signal Level(Power Level: -10.0 dBm) RX PARAMETER  limit  MIN    TYP    MAX    UNIT  Fame Error Rate @2402MHz <= 30.800 %   0.8    % Frame Error Rate@2440MHz <= 30.800 %   0.8    % Frame Error Rate@2480MHz <= 30.800 %   0.733    %
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          10 May-14/2018   6. Ceramic Chip Antenna Specification 6.1 Description Value DESCRIPTION  VALUE Working Frequency  2.45 GHz Bandwidth    170 MHz ( Typ. ) VSWR  2.0 (Max.) Polarization    Linear Azimuth Beamwidth    Omni-directional Peak Gain  5.88 dBi (Typ.)   Impedance    50 Ω Maximum Power    1 W Termination    Ni / Sn (Environmentally-Friendly Leadless)
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          11 May-14/2018   7. Pinout Information 7.1 Schematic Diagram U1DIO_0 1DIO_1 2DIO_2 3GND 4VDDS2 5JTAG_TMS 6JTAG_TCK 7DIO_3 8DIO_4 9NC10GND11VDDS_DCDC12nRESET13DIO_514DIO_615DIO_716DIO_817NC18DIO_919GND20VDDS21GND22NC23GND24VDDR25GND26ANT_SMA27GND28 GND 29GND30GND31H1 H1H2 H2H3 H3H4 H4H5 H5H6 H6H7 H7H8 H8H9 H9DIO_2DIO_1VDDS2DIO_3/JTAG_TDOJTAG_TMSDIO_4/JTAG_TDIJTAG_TCKVDDS_DCDCDIO_8DIO_6DIO_5nRESETVDDSDIO_9DIO_7DIO_0  7.2 Pin Descriptions PIN NAME  PIN  PIN TYPE    DESCRIPTION   DIO_0    1  Digital I/O    GPIO, ULP Sensor Interface, LED driving capability , 2mA / 4mA / 8mA DIO_1    2  Digital I/O    GPIO, ULP Sensor Interface, LED driving capability , 2mA / 4mA / 8mA ,    UART_TX DIO_2    3  Digital I/O    GPIO, ULP Sensor Interface, LED driving capability , 2mA / 4mA / 8mA ,    UART_RX GND  4  Power    Ground   VDDS2    5  Power    3.3V DIO supply   JTAG_TMSC  6  Digital I/O    JTAG TMSC   JTAG_TCKC  7  Digital I/O    JTAG TCKC   DIO_3    8  Digital I/O    JTAG_TDO , High drive capability , 2mA / 4mA / 8mA DIO_4    9  Digital I/O    JTAG_TDI , High drive capability , 2mA / 4mA / 8mA NC  10     No Connector
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          12 May-14/2018   GND  11  Power    Ground   VDDS_DCDC  12  Power      3.3V DC/DC supply. RESET_N    13  Digital input    Reset, active-low. No internal pull-up          DIO_5    14  Digital/Analog I/O  GPIO, ULP Sensor Interface, Analog   DIO_6    15  Digital/Analog I/O  GPIO, ULP Sensor Interface, Analog   DIO_7    16  Digital/Analog I/O  GPIO, ULP Sensor Interface, Analog / I2C_SCL DIO_8    17  Digital/Analog I/O  GPIO, ULP Sensor Interface, Analog / I2C_SDA NC  18     No Connector DIO_9    19  Digital/Analog I/O  GPIO, ULP Sensor Interface, Analog   GND  20  Power    Ground   VDDS    21  Power    3.3V main chip supply GND  22  Power    Ground   NC  23     No Connector GND  24  Power    Ground   NC  25    No Connector GND  26  Power    Ground   NC  27     No Connector GND  28  Power    Ground   GND  29  Power    Ground   GND  30  Power    Ground   GND  31  Power    Ground   GND  H1~H9 Power    Ground
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          13 May-14/2018   7.3 Pin Number Define
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          14 May-14/2018   8. Software Overview 8.1 Software tool installation Follow TI document “CC2640 BLE Software Developer's Guide” to setup compiler tool, BSP and related tools.    8.2 WSDT-752B_SC board GPIO configuration file path   ...\Projects\ble\common\cc26xx\boards\WSDT-752B_SC    Source files:       ...\CC2640EM_4XS\board.h       ...\CC2640EM_4XS\board.c  8.3 PIN define in header file Board.h // UART Board #define Board_UART_TX                                              IOID_1 #define Board_UART_RX                                              IOID_2 #define Board_UART_CTS                                            PIN_UNASSIGNED #define Board_UART_RTS                                            PIN_UNASSIGNED  // I2C Board #define Board_I2C_SCL                                            IOID_7 #define Board_I2C_SDA                                            IOID_8  //Customer Define #define Board_DIO_0                                                IOID_0 #define Board_DIO_5             IOID_5 #define Board_DIO_6             IOID_6 #define Board_DIO_9             IOID_9
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          15 May-14/2018   9. Module Dimensions 9.1 Outline Dimension      (Unit: mm)    Note1 : 3.018mm * 10mm, This is antenna keep out area in the your application.
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          16 May-14/2018
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          17 May-14/2018
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          18 May-14/2018   9.2 Recommended Footprint      (Unit: mm)  < TOP VIEW >
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          19 May-14/2018   10. Recommended Reflow Profile 1. Referred to IPC/JEDEC standard 2. Peak Temperature : <260°C 3. Cycle of Reflow : 2 times max. 4. Nitrogen reflow is recommended, less than 2000ppm of oxygen concentration. 5. If the shelf time is exceeded, be sure baking step to remove the moisture from the component.
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          20 May-14/2018    11. Label Drawing       (Unit: mm)
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          21 May-14/2018   12. Packing Information 12.1 Packing Dimension  TBD
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          22 May-14/2018    13.Statement 13.1 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:   (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.  13.2 ISED Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.  In accordance with FCC Part 15C and RSP-100, this module is listed as a Modular Transmitter device. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
                                                 Gigafu Technology Inc. http://www.gigafu.com.tw/ Proprietary & Confidential Information          23 May-14/2018   The antenna of this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multitransmitter product approval procedures.    13.3 FCC Label Instructions The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: ZQ6-WSDT752BSC” or “Contains FCC ID: ZQ6-WSDT752BSC.” Any similar wording that expresses the same meaning may be used.  Additionally, there must be the following sentence on the device, unless it is too small to carry it: “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:   (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”  If the final product is to be sold in Canada, then this exterior label should use wording such as the following: “Contains Transmitter Module IC: 11956A-WSDT752BSC”

Navigation menu