ANHUI KONKA ELECTRONIC ELST4316S 43 inch FHD Digital LED TV User Manual Parts 2
ANHUI KONKA ELECTRONIC CO., LTD 43 inch FHD Digital LED TV Parts 2
Contents
- 1. User Manual Parts 1
- 2. User Manual Parts 2
- 3. Users Manual Parts 3
User Manual Parts 2
CONNECTING EXTERNAL DEVICES CUSTOMIZING TV SETTINGS Turning On/Off Your TV • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket. Setup Wizard time you turn the TV on; it will • The go into the Setup Wizard. Press the buttons to select your desired mode and press OK button to Home Mode (Energy Saving) is the default as-shipped television and settings. for ENERGY And Home Mode (Energy Saving) is the setting in which the product STAR®. Any changes to default as-shipped television configuration and settings would changethe energy consumption. And enabling certain optional features and functionalities may increase energy consumption beyond the limitsExitrequired for ENERGY STAR ® as applicable. Retail Mode:Select Retail Mode if you would like your picture to be brighter.At times this mode may use more energy to operate the Volume/Sound mode and the Picture Mode. In this setting, the power consumption may possibly exceed the limited requirement of the ENERGY STAR® ENERGY STAR®is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through products and pratices. energy The On-MODE Power under Home Mode should be less than 40.7 W. The SLEEP-MODE Power should be less than 0.49 W. CUSTOMIZING TV SETTINGS Setup Wizard • Press Yes to confirm. Note: If you want change the modes between Home Mode(Energy Saving) and Retail Mode, you can change the setting in the Setup Menu under Display Mode. • Press the buttons to select your desired mode and press OK button to confirm. • Press the buttons to select your desired mode and press OK button to confirm. Menu Language Air/Cable Cable Auto Scan 10 Select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Select antenna between Air and Cable. Select Cable system: Auto, STD, IRC, HRC. Search and store the available channels automatically. CUSTOMIZING TV SETTINGS Navigating The On-screen Display • Press the MENU button to display the main menu. buttons to navigate and select the available menus. • Press the PCM Settings States 11 CUSTOMIZING TV SETTINGS Streaming • Press the MENU button on the main unit or on the remote control to display the buttons to select the desired APP and press OK STREAMING. Then press button to view what you want. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU AccuWeather Pandora Toongoggles 12 Enjoys TV shows & movies streamed instantly over the Internet. YouTube your way on the best screen in your house. Discover, watch and collect the latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments. Displays the current weather conditions and the temperature anywhere in the world in centigrade or Fahrenheit. Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. It’s easy to create personalized stations that play only music you’ll love. A subscription video on-demand platform that offers animated, fun and educational cartoons, engaging games and songs from all over the world and in many different languages to children. CUSTOMIZING TV SETTINGS Media NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control and then press buttons to select the MEDIA, and then press OK button to enter. Viewing Photos MEDIA Return WMDW WMAW MN Device : 1 • After entering MEDIA, press disk type to enter. Then use and then press button enter. MV WMEW MB WMTW MY WMU Directories:10 Files:0 Total:101 WMC /1 buttons to select PHOTOS and then select the buttons to navigate in the picture folder Note: File format supported: JPEG. 13 CUSTOMIZING TV SETTINGS Listening To Music • After entering MEDIA, press disk type to enter. Then use and then press button enter. buttons to select MUSIC and then select the buttons to navigate in the music folder Note: File format supported: MP3. MEDIA Return WMDW WMAW MN Device : 1 14 MV WMEW MB WMTW MY WMU Directories:10 Files:0 Total:101 WMC /1 CUSTOMIZING TV SETTINGS Selecting The Input Source • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. • Press the buttons to select your desired input source among: TV/AV/ Component/HDMI1/HDMI2/HDMI3/VGA and then press OK button to Channel Selection • Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel. • Press the 0-9 buttons on the remote control to select the channel directly. Press "4", and then press OK button to select channel 4. Press "4" and "5", and then press OK button to select channel 45. Press "1", "2" and "3", and then press OK button to select channel 123. Volume Adjustment • Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume. • If you wish to switch the sound off, press the MUTE button again or the VOL+ button to resume the sound. 15 CUSTOMIZING TV SETTINGS Setup • Press the MENU button on the main unit or on the remote control to display the main interface. Then press buttons to select SETUP menu and press button to select the desired option. Settings • Press buttons to select SETTINGS menu and then press OK button to enter. buttons to select the • Press following setting options and then buttons to adjust each press option’s setting. Menu Language Transparency Zoom Mode Noise Reduction 16 Select menu language:English, French or Spanish. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode:Normal/Wide/Cinema/Zoom/Just Scan(For HDMI)/Dot to Dot(For VGA). Note: Different input source, the zoom mode options may differ. Reduce the noise level of the connected device:Off/ Weak/Middle/Strong. CUSTOMIZING TV SETTINGS Advanced Closed Caption DLC Restore Default Adjust advanced option’s setting: Horizontal POS, Vertical POS.Clock,Phase or Auto.(VGA source mode only) CC Mode Select CC mode : On, Off or CC on Mute. Basic Basic Selection: CC1, CC2, CC3, CC4, Selection Text1, Text2, Text3, Text4. Advanced Selection: Service1, Service2, Advanced Service3, Service4, Service5, and Selection Service6. Options: Mode, Font, Size, Edge Effect, Option Edge Color, Text Color, Background Color, Text Opacity, Background Opacity. Select to turn On/Off the dynamic luminance control. Restore the TV to factory default settings. Audio Settings • Press buttons to select AUDIO menu and then press OK button to enter. buttons to select • Press the the following audio options and then press the buttons to adjust each option’s setting. Sound Mode Bass Treble Balance SPDIF Mode Surround Sound Auto Volume Audio Language Allow the selection of an audio-enhancement technique: Standard/Music/Movie/User Alternative: you may press the S.MODE button to select the sound mode directly. Control the relative intensity of lower-pitched sounds. (For User mode) Control the relative intensity of higher-pitched sounds. (For User mode) Adjust the relative volume of the speaker in a multiple speaker system. Select the digital audio output mode between RAW/ PCM. Provide an enhanced listening experience. Volume levels are automatically controlled. Select audio language among: English, French, Spanish 17 CUSTOMIZING TV SETTINGS Picture Settings buttons to select PICTURE • Press menu and then press OK button to enter. • Press the buttons to select the following audio options and then buttons to adjust each press the option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp. 18 Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly. Allow the blue background to turn On/Off during weak or no signal conditions. Increase or decrease the amount of white in the picture. (For User mode) Adjust the difference between light and dark levels in the pictures. (For User mode) Control the color intensity. (For User mode) Adjust the level of crispness in the edges between light and dark areas of the picture. (For User mode) Adjust the balance between red and green levels. Cycle among color temperatures: Cool/Normal/Warm. CUSTOMIZING TV SETTINGS Channel Settings buttons to select • Press CHANNEL menu and then press OK button to enter. buttons to select • Press the the following audio options and then press the buttons to adjust each option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel Name Label Signal Information Select antenna between Air and Cable. First, select your cable system from Auto/STD/IRC/HRC. Next, select the Auto Scan feature to scan your available cable channels. It will perform the auto scan if the Air antenna is selected. Set the selected channel as favorite channels. Show/Hide the selected channel. Display the current channel name. Display the current channel label. Display the information of current signal. Time Settings • Press buttons to select TIME menu and then press OK button to enter. • Press the buttons to select the following audio options and then buttons to adjust each press the option’s setting. Sleep Timer Time Zone Daylight Saving Time Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Select a Time Zone: Hawaii/ Alaska/ Pacific/ Mountain/ Central/ Eastern/ Atlantic/ Newfoundland. Select to turn On/Off daylight saving time. 19 CUSTOMIZING TV SETTINGS Network Settings • Press buttons to select NETWORK menu and then press OK button to enter. buttons to select the • Press following network options and then press buttons to adjust each option’s setting. Network Settings Network States Deactivate Vudu ESN 20 Settings States Select two types of network: Wireless or Lan. Show details of network states. (Connect To 、IP Address、Subnet Mask、Gateway、 DNS Server IP address、 MAC ADDR、Interface) and clear the account information. Deactivate Deactivate Vudu and clear the account information. Electronic Serial Number. CUSTOMIZING TV SETTINGS Lock Settings • Press buttons to select LOCK menu and then press OK button to enter. • Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press the buttons to select the following options and then press the buttons to adjust each option’s setting. The default password is "0000". Change Password System Lock USA Canada RRT Setting Reset RRT Clear Lock Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for Select to turn On/Off system lock. The following options (USA, Canada, RRT Setting and Reset RRT) will only be accessible when you turn the system lock on. TV RATING: Press OK button to lock or TV unlock TV rating. Select MPAA rating : N/A,G, PG, PG-13, R, MPAA NC-17,or X. Canada Select MPAA rating for English-speaking English Canada : E, C, C8+, G, PG, 14+, 18+. Canada Select MPAA rating for Quebec Canada : E, French G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. Set Rating Region Table. Select to reset the RRT setting. Clear all lock settings. 21 CUSTOMIZING TV SETTINGS Parental Control Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV. Parental Control allows the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer. It can be preset and turned either on or off by the user the secret 4-number code, the password. The number of hours blocked are who specified. General audiences and children blocks should be both programmed into the TV's memory. Viewer ratings are for both TV and the motion picture Industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children. Overview To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus examples below. Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG,TV-14,or TV-MA rated programming.) Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/VIdeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block program "Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control. Do not forget the password, it is the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.Do you want the Parental Control to be active at all times? If not, you can turn it on or off with the Lock On/Off option. • You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time. • Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources. • Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources. • You can not disable Parental Control by disconnecting the TV from power. Block hours will if power is disconnected. be automatically reset to the original block time setting 22 CUSTOMIZING TV SETTINGS Motion Picture Association of America (MPAA) Rating System Grade General Audiences Parental Guidance Suggested PG PG-13 Parents Strongly Cautioned Restricted NC-17 No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for pre-teens, with a greater degree of offensive material suggested than a PG rated program. Not for children under 17, strong element of sex and/or violence. Not for children under 17 under any circumstances. Strong sexual content. Same as NC-17 rating. MPAA Not Rated TV Parental Guideline Rating System TV-Y TV-Y7 Grade All Children Directed to Older Children TV-G General Audience TV-PG Parental Guidance Suggested TV-14 Parents Strongly Cautioned TV-MA Mature Audience Only Meaning Content not offensive to most viewers. Considered suitable for children over 7, may contain fantasy violence scenes. Considered suitable for all audience; children may watch unattended. Suggested unsuitable for younger children, may contain suggestive language, bad language, sex and violence scenes. unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes. Adults only, may contain strong language, bad language, sex and violence scenes. Canadian Rating: • Canadian English is used throughout all English-speaking Canada (E,C, C8+,G, PG,14+, 18+). • Canadian French is used in Quebec (E,G,8 ans+, 13 ans+,16 ans+, 18 ans+). The V-Chip will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category, then allthe categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA). 23 TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support (Refer to Warraty page). SYMPTOM Dead. No LED lit No power to the TV. Dead. No LED lit red Set in standby mode. Blue screen No signal. Incorrect source selected. Noisy, snowy, ghosting picture (TV) Poor antenna signal. No sound Sound "Mute". Volume set too low. External leads not connected "if used". PASSWORD Lost password 24 POSSIBLE CAUSE REMEDY • Check all connections to the TV's AC socket. • Press either the Power button or the Standby button on the remote control. • Press the SOURCE button to select the correct source. • If using an indoor antenna, try adjusting the antenna position. Check antenna connections. • Turn sound "Mute" off. • Check volume settings. • Check that all external leads are connected properly. Select the SET Password setting in the LOCK menu, then enter the following master password “8899”. The master password clears your previous password and allows you to enter a new password. TROUBLESHOOTING Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM POSSIBLE SOLUTIONS • Check that the main plug has been connected to a wall outlet. • Check that you have pressed the POWER on the No sound and picture front of the TV set. • Check the picture contrast and the brightness setting. • Set in standby mode. Press either the Power button Red LED indicator lights or the Standby button on the remote control. • Check the volume. • Sound muted? Press the MUTE button. Normal picture but no sound • Try another channel, the problem may be with the broadcast. • Are the audio cables installed properly? • Check to see if there are any objects between the TV and remote control causing obstruction. The remote control does not • Are batteries installed with correct polarity (+/-)? work • Correct remote operating mode set: TV, VCR, etc? • Install new batteries. • Is the sleep timer set? • Check the power connection, power may be Power suddenly turns off interrupted. • No broadcast on the station tuned. • This is normal, the image is muted during the product Picture appears slowly after start up process. Please contact a service provider if switching on the picture has not appeared after 5 minutes. • Adjust the color in Menu option. • Keep a distance between the product and the VCR. • Try another channel, the problem may be with the Poor color or picture broadcast. • Are the VIDEO cables installed properly? • Activate any function to restore the brightness of the picture. Horizontal/vertical bars or • Check for local interference, such as an electrical picture shaking appliance or power tool. Blue screen • Press the SOURCE button to select correct source. • Station or cable experiencing problems. Tune to another station. Poor reception on • Station signal is weak, reorient antenna for better some channels reception. • Check for sources of possible interference. • Check the antenna (change the direction of the Lines or streaks in pictures antenna). No output from one of the • Adjust balance in the Menu option. speakers 25 TROUBLESHOOTING Note: When there is a problem in VGA mode ( only when VGA mode is applied). PROBLEM The signal is out of range Vertical ba r or s t r ip on t he background, horizontal noise and incorrect position Screen color is unstable or is a single color POSSIBLE SOLUTIONS • Adjust resolution, horizontal or vertical frequency. • Check whether the signal cable is connected or loose. • Check the input source. • Set the auto H/V position. or adjust clock, phase, or • Check the signal cable. • Reinstall the PC video card. Maintenance Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. Storage temperatures are 32° to 122°F(0° to 50°C). Working temperatures are 32° to 95°F(0° to 35°C). Do not place your TV in direct sunlight or near a heat source. Clean the screen A great tip to dust off your screen: wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the screen. Make sure the excess water is off the screen, then let air-dry before you turn on the TV. Cleaning the cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, line-free cloth. Please be sure not to use a wet cloth. 26 FCC NOTES FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. SPECIFICATIONS Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI & Component Support Panel Resolution Aspect Ratio Contrast Ratio-Panel Brightness (Centre Typ.) Cd/M² Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (L0/3) Vertical Viewing Angle (L0/3) TV System Channel Range Design and 42.5 inches diagonally DLED TFT 60 Hz Up to 1080P 1080P 1920 x 1080 16:9 1000:1 170~200 8 ms 20,000 hours 100 80 ATSC/NTSC VHF/UHF are subjects to change without prior notice. 27 OTT APP SERVICE OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.com/forum/#!categories/youtube/smart-tvs • VUDU You can call the following telephone for more help: 888-554-8838 • TG You can call the following telephone for more help: 888-874-5411 • Pandora You can send E-mail to Pandora for more help: pandora-support@pandora.com • AccuWeather You can send E-mail to AccuWeather for more help: CustomerService@AccuWeather.com 28 for This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. P/N: 39060770 CONTENU CONTENU Consignes de sécurité importantes Renseignements sur la sécurité Préparation Éléments compris Vue avant Vue arrière Installation du socle Retrait du socle en vue d’un montage mural Télécommande Connexion des appareils externes Personnalisation des paramètres du téléviseur Naviguer dans les paramètres de configuration Diffusion Média Visionnement de photos Écoute de musique Source Configuration Paramètres Audio Image Prog. Heure Réseau Verrouillage 10 11 12 13 13 14 14 15 15 16 17 18 18 19 20 Contrôle parental 21 Dépannage 23 Entretien 24 Caractéristiques technique 25 Garantie limitée 26 OTT APP Service 27 Fr -1 CONSIGNES DE SÉCURITÉ IMPORTANTES CONSIGNES DE SÉCURITÉ IMPORTANTES • Lisez ces consignes – Avant d’utiliser ce produit, vous devez lire toutes les consignes liées à la sécurité et au fonctionnement de l’appareil. • Conservez ces consignes – Nous vous conseillons de conserver les consignes liées à sécurité et au fonctionnement de l’appareil pour consultation future. • Observez toutes les mises en garde –Vous devez suivre toutes les consignes liées au fonctionnement et à l’utilisation de l’appareil. • Suivez toutes les consignes – Vous devez suivre toutes les consignes liées au fonctionnement et à l’utilisation de l’appareil. • N’utilisez pas cet appareil près de l’eau – L’appareil ne doit pas être utilisé près de l’eau ou dans un lieu humide, par exemple dans un sous-sol humide ou près d’une piscine et autres. • Nettoyez uniquement à l’aide d’un chiffon sec. • N’obstruez pas les orifices de ventilation. Installez l’appareil conformément aux consignes du fabriquant. • N’installez pas l’appareil à proximité d’une source de chaleur comme un radiateur, une bouche de chaleur, une cuisinière ou d’autres appareils qui produisent de • Ne contournez pas le dispositif de sécurité de la fiche polarisée ou de la fiche de mise à la terre. est plus large que l’autre. Une fiche avec mise à la terre comporte deux lames, en plus d’une broche de masse. La lame plus large ou la broche de masse pas compatible avec votre prise, adressez-vous à un électricien pour faire remplacer la prise, qui est probablement désuète.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Placez le cordon d’alimentation de sorte qu’il ne risque pas d’être piétiné ou coincé, particulièrement qu’au point de sortie de l’appareil. • N’utilisez que les fixations et les accessoires recommandés par le fabricant. • Utilisez l’appareil uniquement avec le chariot de manutention, le support, le trépied ou la table recommandé par le fabricant ou vendu avec l’appareil. Si vous utilisez un chariot, déplacez- l e avec précaution afin d’éviter de le renverser et de vous blesser. • Débranchez l’appareil en cas d’orage ou lorsqu’il reste inutilisé pendant une période prolongée. • Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire si l’appareil a été endommagé d’une manière ou d’une autre, par est endommagé, si un liquide a été renversé sur l’appareil, ou si des objets sont tombés sur celui-ci, l'appareil a été exposé à la pluie ou à l'humidité, s’il fonctionne mal ou s’il est tombé.Please keep the unit in a well-ventilated environment. Fr -2 • Veuillez installer l’appareil à un endroit bien aéré. MISE EN GARDE : pour réduire les risques d’incendie et de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. Ne l’exposez pas non plus aux égouttements ou aux éclaboussures. Ne placez pas d’objets remplis de liquide, par exemple un vase, sur le dessus de l’appareil. MISE EN GARDE : n’exposez pas les piles à une chaleur excessive comme celle induite par la lumière du soleil, un feu ou autrement. MISE EN GARDE :la prise secteur sert de dispositif de désaccouplage; elle doit demeurer facilement accessible. MISE EN GARDE : afin de réduire les risques d’électrocution, retirez pas le couvercle (ou le panneau arrière), car il n’y a aucune pièce réparable par l’utilisateur à l’intérieur. Confiez les réparations à un Le symbole représentant un éclair terminé par une flèche à l’intérieur d’un triangle équilatéral vise à avertir l’utilisateur du danger de la présence d’une«tension dangereuse »présentée pardes pièces non isolées à l’intérieur de l’appareil, éventuellement suffisante pour constituer un risque d’électrocution. Le symbole de point d’exclamation à l’intérieur un t riangle équila t éral , vise à inf orme r l’utilisateur de la présence de consignes de fonctionnement et de maintenance importantes dans la documentation qui accompagne l’appareil. Cet équipement est un appareil électrique de classe II ou à double isolation. Il a été conçu de sorte àne pas nécessiter une connexion de sécurité mise à la terre. Ce produit contient des composants électriques ou électroniques. S’ils ne sont pas mis auxrebuts adéquatement, ces composants pourraient nuire à l’environnement ou à la santé des humains. La présence de cette étiquette sur le produit tantque déchet non trié, mais faire l’objet d’une collecte sélective. Comme consommateur, vous devez vous assurer que ce produit est mis aux rebuts de la bonne manière. Ce produit est conforme aux directives E N E R G Y S TA R ® p o u r l ' e ff i c a c i t é énergétique. ENERGY STAR et la m a r q u e E N E R G Y S TA R s o n t d e s marques américaines déposées. E N E R G Y S TA R e s t u n e m a r q u e déposée appartenant au gouvernement des États-Unis.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:10:14 10:19:08+08:00 Creator : Adobe Acrobat Pro 10.0.0 Modify Date : 2016:10:19 18:32:42+08:00 Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:10:19 18:32:42+08:00 Creator Tool : Adobe Acrobat Pro 10.0.0 Format : application/pdf Document ID : uuid:bbe6814a-5d92-4cfe-996e-e42b372501b0 Instance ID : uuid:3f9dc2d3-49a3-4c93-847f-77ac81dc2661 Producer : Adobe Acrobat Pro 10.0.0 Page Count : 24EXIF Metadata provided by EXIF.tools