ARRIS C41 Satellite Home Media Center Client Receiver with integrated RF4CE Wireless Remote User Manual manual pt 2

Pace Americas Satellite Home Media Center Client Receiver with integrated RF4CE Wireless Remote manual pt 2

manual pt 2

1DRAFTRC71 remote control for HR44 and C41 modelsUsing the RC71 remote controlMost remote controls work by sending an infra-red (IR) signal to your DIRECTV® Receiver and you must point them directly at your DIRECTV® Receiver for them to work.The RC71 remote control has been factory-set to work in this way, but you can program it to control your HR44 DIRECTV® Receiver or C41 DIRECTV® Receiver using a radio-frequency (RF) signal instead. This means that you do not have to point the remote control directly at your DIRECTV® Receiver for it to work.During the programming process, the RC71 remote control becomes paired with a specic DIRECTV® Receiver. You can, however, later pair it with a different DIRECTV® Receiver instead, if you wish.You can also reset your remote control to revert to working by means of IR. You need to do this rst, if you wish to pair your remote control with a different DIRECTV® Receiver.You program for RF and reset using on-screen menus, which give you instructions. The green light on the RC71 remote control ashes at key stages during programming and reset.Green light that ashes when you program the remote controlMUTE buttonCH Channel up/down button (rocker switch)Buttons you use to program and reset the RC71 remote controlSELECT buttonENTER button
2DRAFTRC71 remote control for HR44 and C41 models (cont.)Programming your RC71 remote control to use RFStarting from a TV picture, point your RC71 remote control at your DIRECTV® Receiver and press MENU.Select Settings and Help, then select Settings.Select Remote Control.Select IR/RF Setup.Use the arrow buttons to highlight IR, then press SELECT.Use the arrow buttons to highlight RF, then press SELECT.Use the right arrow button to highlight Continue, then press SELECT.Hold down both the MUTE button and the SELECT button until the green light on the RC71 remote control ashes two times.In quick succession, press the following buttons: 9, then 6, then 1, then CH (up), then ENTER.The green light on the RC71 remote control ashes four times to show you have successfully programmed your RC71 remote control and paired it with your DIRECTV® Receiver.Select Done to complete the pairing process.
3DRAFTRC71 remote control for HR44 and C41 models (cont.)Resetting your RC71 remote control to use IRIf you are resetting at the DIRECTV® Receiver your remote control is currently paired with, you use on-screen menus.Starting from a TV picture, press MENU.Select Settings and Help, then Remote Control, then Reset Remote.**Hold down both the MUTE button and the SELECT button until the green light on your RC71 remote control ashes two times.In quick succession, press the following buttons: 9, then 8, then 1.The green light on your RC71 remote control ashes four times to show you have successfully reset your RC71 remote control to its factory settings.Select Done to complete the resetting process.Your RC71 remote control now works using IR, so you have to point it directly at your DIRECTV® Receiver to use it.** If you want to reset your remote control at a receiver it is not currently paired with, begin the resetting process at point ** above.

Navigation menu