ARRIS WRMTM5 WIRELESS ROUTER MODULE User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	711068
Application ID	fE5eblplYZy121BoZ0fODQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.34kB (229305 bits)
Date Submitted	2006-09-29 00:00:00
Date Available	2006-09-29 00:00:00
Creation Date	2006-09-27 21:44:59
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-09-27 21:45:13
Document Title	users manual
Document Creator	PScript5.dll Version 5.2

FCC Part 15.247
Transmitter Certification
Direct Sequence Spread Spectrum Transmitter
Test Report
FCC ID: UID-WRMTM5
FCC Rule Part: 15.247
ACS Report Number: 06-0200-15C
Manufacturer: Sercomm
Applicant: ARRIS International, Inc.
Model: TM552 WRM
Installation Guide
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
TM552 WRM INSTALLATION GUIDE
WORKING INSTRUCTION
組裝段
機種別/版本
主件料號:80-BETNGN-00P
作業名稱 : 鎖主板
作業人數
安全防護
文件編號
MODEL NAME/REV.
Station NO.
Person
Safety Protection
Doc. NO.
TM552 WRM
2/12
站別／站數
文件版本 發行日期
wear ESD gloves and
M3-701-C06VPA023
wrist strap,button
slevees
1.Confirm 5M checklist before assembly: 5M(manpower,machine,material,method,measurement), any abnormal, please inform the line leader.
2.Take two screws and check if any damages on the them. If not, put the two screws onto the fixture with screw head down. (Photo 1)
3.Put the motherboard on the fixture. Let two screws on the fixture already go through the through holes of the motherboard. (Photo 2)
擬案
機構會簽
製造組長會簽
核准
Doc. Rev.
Issue Date
Prepared
Approved2
Approved2
Approved1
REV02
2006/9/6
Laurie Wang
4.Take two metal stand offs and make sure there is no damage on them. If so, put the metal
stand offs onto the two screws and use hex driver to fasten them. (Photo 3)
5. Confirm 5S checklist after operate,any abnormal inform line leader.
Put the 2 screws with screw
head down on the fixture
Photo 1
photo 3
Photo 2
料號
Part NO.
品名
Description
數量
QT
13GMAPXD050W
screw
13GB4710M510-1
metal stand off
耗材(品名/料號/規格)
Consumers
治工具(品名/料號/規格)
Fixture &Tools
Assembly fixture
Hex driver (Torque:2.8, 0.2kg.f*cm, #5 driver
head)
工作指導書
WORKING INSTRUCTION
組裝段
機種別/版本
主件料號:80-BETNGN-00P
作業名稱 : 組裝网卡&主板
站別／站數
作業人數
安全防護
文件編號
Safety Protection
Doc. NO.
MODEL NAME/REV.
Station NO.
Person
TM552 WRM
3/12
文件版本 發行日期
wear ESD gloves
M3-701-C06VPA023
and wrist
strap,button slevees
1.Confirm 5M checklist before assembly: 5M (manpower, machine, material, method, measurement), if any abnormal, please inform the line leader.
2. Take WRM and check whether any missing or scratch on the WRM to make sure the pins of LAN JACK, antenna connecter & reset button
are good. Also make sure that solder side is not scrathced or the WRM FW and S/N label is legible, if anything defect, just put it into defect
box.
3.Take 1 plastic stand off and inspect it to make sure no bending and no scratched. And then, fasten the small foot of the plastic stand off to the
bottom side of WRM (Photo 1)
4.Get the WRM and carefully aim at the 2x 12 pin holes to the pin header (location on P601) on the mother board and then plug the pins into
the holes.
擬案
機構會簽
製造組長會簽
核准
Doc. Rev.
Issue Date
Prepared
Approved2
Approved2
Approved1
REV02
2006/9/6
Laurie Wang
5. Click the other end of plastic stand off to the through hole near RJ-11 on the mother
board (photo 3).
6. Align the PTH of the WRM with the two metal stand offs.(Photo 4)
Plug the plastic
stand off in
Small foot
Photo 3
Photo 4
2x 12 pin holes on WRM
7. Check whether the plastic stand was opposite after inserting.Check method:
(1)VI the size of plastic stand's two ends
(2)Whether end is loose when plastic stand off is pluged to WRM and to mother
board, it
shows it's plugged upside down.
Photo 1
2 x 12 Pin
header (P601)
Photo 2
料號
Part NO.
品名
Description
數量
QT
13GB4710P560-1
plastic stand off
耗材(品名/料號/規格)
Consumers
治工具(品名/料號/規格)
Fixture &Tools
工作指導書
WORKING INSTRUCTION
組裝段
機種別/版本
主件料號:80-BETNGN-00P
作業名稱 : 鎖网卡&主板
站別／站數
作業人數
安全防護
文件編號
Safety Protection
Doc. NO.
MODEL NAME/REV.
Station NO.
Person
TM552 WRM
4/12
文件版本 發行日期
wear ESD gloves
M3-701-C06VPA023
and wrist
strap,button slevees
1.Confirm 5M checklist before assembly: 5M (manpower, machine, material, method, measurement), if any abnormal, please inform the line leader.
2.Take the assembled WRM and mother board from the production line,check whether the plastic stand off is clipped good, the 2x12 pins are
plugged good (all the pins need to go through the holes.) (Photo 1)
3.Get two screws and put them to the PTH of the WRM. Use electric screw driver to fasten the screws. (Photo 2)
擬案
機構會簽
製造組長會簽
核准
Doc. Rev.
Issue Date
Prepared
Approved2
Approved2
Approved1
REV02
2006/9/6
Laurie Wang
4.Modify the torgue value of electric screw driver before operating.
5.Put the locked board on the production line.
6.Confirm 5S checklist after operate,any abnormal inform line leader.
fasten screws on
圖二
Photo 1
Photo 2
料號
Part NO.
品名
Description
數量
QT
13GMAPXD050W
screw
04G030002100
WRM
耗材(品名/料號/規格)
Consumers
治工具(品名/料號/規格)
Fixture &Tools
assembly fixture
electric screw driver (torque:2.8
0.2kg.f*cm,#1 screw driver head)
NOTICE TO USER
FCC Class B:
“NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.”
Warning: Changes or modifications to this device not expressly
approved by ARRIS International, Inc. could void the user’s
authority to operate the equipment.
RF Exposure
In accordance with FCC requirements of human exposure to
radiofrequency fields, the radiating element shall be installed such
that a minimum separation distance of 20cm shall be maintained
from the user and/or general population
IC:
This Class B digital apparatus meets all requirements of the
Canadian Interference Causing Equipment Regulations. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Cet appareillage numérique de la classe B répond à toutes les
exigences de l'interférence canadienne causant des règlements
d'équipement. L'opération est sujette aux deux conditions
suivantes: (1) ce dispositif peut ne pas causer l'interférence
nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer
l'opération peu désirée.
NOTES:
This device has been designed to operate with the antennas listed
below, and having a maximum gain of 1.8dBi. Antennas not
included in this list or having a gain greater than 1.8dBi are strictly
prohibited for use with this device. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. The approved antennas used with
this device are 1. C147-510023-A and 2. C66-510003-A.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:dd3e9806-4f2d-47a7-827b-028285d9fe03
Modify Date                     : 2006:09:27 21:45:13-04:00
Create Date                     : 2006:09:27 21:44:59-04:00
Metadata Date                   : 2006:09:27 21:45:13-04:00
Document ID                     : uuid:90e7868d-557a-4972-93ed-d894fb732d17
Format                          : application/pdf
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 6.0 (Windows)

EXIF Metadata provided by EXIF.tools