ARTSYSTEM AMT-303 USN Tag User Manual AMT 303

Download:
Mirror Download [FCC.gov]
Document ID	1451961
Application ID	OpYncqyMucpcI+5oP5Xx5A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30kB (374965 bits)
Date Submitted	2011-04-21 00:00:00
Date Available	2011-04-21 00:00:00
Creation Date	2011-04-08 11:28:18
Producing Software	ePapyrus PDF-Pro 4
Document Lastmod	2011-04-08 11:28:18
Document Title	Microsoft Word - User Manual_AMT-303_
Document Creator	ePapyrus PDF-Pro 4
Document Author:	maverick

YYYY
YYYY/MM/DD
Document No.
20
2011/03/04
Revision
File/Reference
Code
User’ss Manual
1.0
Preparer / Position
Document Manager /
Position
CHO HYUNJUN/ Senior
CHO HYUNJUN / Senior
Researcher
Researcher
Review / Position
Document
Document
Type
Class
Title
AMT-303 User’s Manual
AMT
AMT-303
User’s Manual
MM/DD
YYYY/MM
Document No.
Revision
Code
2011/03
1/03/04
File/Reference
Page
2(9)
User’ss Manual
1.0
Document Information
Version
1.0
Preparation Senior Researcher
CHO HYUNJUN
Document
AMT-303 User’s
User Manual
Name
Date
2011/03/04
State
In Working
History of Revision
Date
Ver.
2011.03.04
1.0
Details
Initial Preparation
Revised by
Position
CHO HYUNJUN
Senior
Researcher
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
2011/03
1/03/04
Document No.
Revision
Code
File/Reference
User’ss Manual
Page
3(9)
1.0
Table of Contents
1.
OVERVIEW ................................................................................................................................
................................
............................................................ 4
1.1.
PURPOSE ................................................................................................................................
................................
.......................................................... 4
1.2.
SCOPE ................................................................................................................................
................................
................................................................ 4
1.3.
CAUTIONS ................................................................................................................................
................................
....................................................... 4
2.
BASIC STRUCTURE ................................................................................................................................
................................
............................................ 6
2.1.
NAME AND FUNCTION OF EACH PART OF AMT-303 ...........................................................
................................
2.2.
DETAILED FUNCTION OF EACH PART OF AMT-303................................
................................................................ 7
2.3.
CONSIDERATIONS IN INSTALLATION
IN
................................................................
.............................................................. 8
2.4.
SPECIFICATION ................................................................................................................................
................................
............................................. 9
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
Document No.
2011/03
1/03/04
Revision
File/Reference
Code
Page
User’ss Manual
4(9)
1.0
1. Overview
This document is prepared for the right use of AMT-303,
AMT 303, P2L TAG. To maintain the
equipment at the best condition with right handling methods,
methods, carefully read and fully
understand this manual before using the equipment.
The specification is subject to change without notice, if necessary for improvement of
performance
If you have any inquiries,
inquiries, please do not hesitate to contact us, the Art System Co., Ltd.
For safety, carefully read safety items in this manual before use.
1.1. Purpose
This document is the user’s
user manual of AMT-303
1.2. Scope
This document covers the structure and the operation methods of AMT-303
AMT
1.3. Cautions
Cautions for Installation and Operation
Beware of electric shock in installing and operating the equipment as it uses DC 5V
power. Do not pull out the power supply and touch it with wet hands. You may
have electric shock.
Check whether the output of the adaptor is DC 5V and remove the battery from
the equipment before using it.
We are not responsible for problems caused by using a power other than DC 5V
Avoid a place with direct sun rays and a closed hot and humid place when selecting
an installation and storage position. Install and store the equipment in an indoor
place under room temperature. Installing and storing it in a hot and humid place
can reduce the life span of the product.
Cautions for Maintenance
Do not place a strong impact on the equipment and do not drill the equipment.
Otherwise, the equipment may be broken or the life span of the product can be
short.
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
Document No.
Revision
File/Reference
Code
2011/03
1/03/04
Page
5(9)
User’ss Manual
1.0
Cautions for Disassembly
Do not disassemble, repair and modify the equipment, except an authorized
au
person.
We are not responsible for any problems caused by disassembly without permission
Cautions According to Surrounding Environment
This
product
adopts
wireless
communication
using
ZigBee.
Therefore,
communication status can be worse because of surrounding environment.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS
This device complies with part 15 of the FCC Rules. Operation
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference; and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
Document No.
2011/03
1/03/04
Revision
Code
File/Reference
Page
User’ss Manual
6(9)
1.0
2. Basic Structure
2.1. Name and Function of Each Part of AMT-30
03
2.1.1. The Front
Quantity Modification Buttons
SET Button
OK LED Button
LCD Display
LED Button
The front of the product consists of the following items as shown in the picture
above.
LCD
4 LED Buttons for
or Work Identification
2 Quantity Modification Buttons
Button
1 SET Button
1 OK LED Button
2.1.2.
The Back
Battery Inserting Part(AA
Part
type)
7 Pins Socket
DC 5V Adapter
Socket
http://www.artsystem.co.kr
Reset Button
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
Document No.
2011/03
1/03/04
Revision
Code
File/Reference
User’ss Manual
Page
7(9)
1.0
The back of the product consists of the following items as shown in the picture
above.
Battery Inserting Part
DC 5V Adapter Socket
RESET Button
7 Pins Socket 1 Port ( F/W Upgrade )
2.2. Detailed Function of Each Part of AMT-303
2.2.1. LCD Display
sensitivity, battery condition, work data, working

 LCD displays RF reception sensitivity,
quantity and workers
2.2.2. LED Button

 LED buttons are located to distinguish four different works. When they receive a
work order, a corresponding LED button is blinking to show that the work is in
progress.
2.2.3. Quantity Modification Button

 Quantity Modification Buttons
Buttons change quantity when work descriptions have been
changed..
2.2.4. OK Button

 It is used for work completion order and confirmation.
2.2.5. Power Supply Part
DC5V
DC5V power connector supplies DC 5V power which is converted via an external
adaptor.
Battery Inserting Part
Insert two AA batteries (1.5V) to supply power, paying attention to the direction
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
2011/03
1/03/04
Document No.
Revision
Code
File/Reference
Page
User’ss Manual
8(9)
1.0
However, in the battery mode, the external adapter should be removed.
RESET
Reset button conducts initialization of the product
2.2.6. External Interface
7 pin Connector
It is used to update the product. A user should not use this connector.
2.3. Considerations in Installation

 Install the product in the center of the ZigBee Network for optimized ZigBee
network management and communication. The interior and allocation of the products
pro
can affect the communication.

 Place the product in open space. Check whether there are metals, which may
interfere with the communication.
communication. If there are many metals near the product, the
communication may be not smoothly established.
If you have any inquires while using and operating the system, please contact the
manufacturer
http://www.artsystem.co.kr
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2
MM/DD
YYYY/MM
Document No.
Revision
Code
2011/03
1/03/04
File/Reference
Page
User’ss Manual
9(9)
1.0
2.4. Specification
Classification
CPU/Zigbee
Antenna
Specification
Remark
CC2530( 2.4GHz 1EEE 802.15.4 )
- 2.4 ~ 2.485Ghz( 16Ch )
Chip Antenna
TN Segment LCD( 25 x 50 )
LCD
- Duty : 1/4, Bias : 1/3,
- Display : Positive
- LED Lamp Push Button 4EA(Worker)
Interface
- LED Lamp Push Button 1EA(OK)
- Push Button 3EA( +,-,SET)
+,
Power
http://www.artsystem.co.kr
AA 1.5V 2EA( Alkaline ) or 5VDC(±
5VDC( 10%)
Advanced Real Time System co., LTD
210X297mm 인쇄용지 70g/m2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
Producer                        : ePapyrus PDF-Pro 4
Create Date                     : 2011:04:08 11:28:18
Modify Date                     : 2011:04:08 11:28:18
Title                           : Microsoft Word - User Manual_AMT-303_
Creator                         : ePapyrus PDF-Pro 4
Author                          : maverick

EXIF Metadata provided by EXIF.tools