ASSALOY SCYPROX5 Microprocessor Controlled Network Lock User Manual 12 0305 Exhibit Cover

ASSA ABLOY Inc. Microprocessor Controlled Network Lock 12 0305 Exhibit Cover

Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598Certification ExhibitFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5FCC Rule Part: 15.209, 15.249IC Radio Standards Specification: RSS-210ACS Project Number: 12-0305Manufacturer: Assa AbloyModel: C2-PA/PKManual
A8122B 8/12Copyright 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. These installation instructions include Microsoft® Tags that you can scan to view videos of certain installation steps. The Microsoft Tag mobile app is required to scan the Tags. Download the free mobile app at http://gettag.mobiwith Aperio™ TechnologyMortise LockInstallation InstructionsIN100Preliminary
1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/05/121234567 Table of ContentsWarning ...................................................................................2General Description .................................................................3Specifications ..........................................................................3System Overview .....................................................................3Parts Breakdown .....................................................................4Lock Installation ......................................................................6Maintenance .........................................................................15Operational Check ................................................................16Lock LED Indications ............................................................17Changes or modifications to this device not expressly approved by ASSA ABLOY could void the user’s authority to operate the equipment.Warning 1FCC:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Industry Canada:This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée.“This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and SARGENT Manufacturing makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.89!Preliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 3Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock Warning: SARGENT Mfg. Co. IN100 locksets utilizing a door position switch (DPS) are not rated for, or intended for use in life safety applications.System Overview4!To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only.SpecificationsGeneral Description23The SARGENT® IN100 mortise lock with Aperio™ Technology makes it easy and cost-effective to bring ac-cess control to doors. It uses local wireless communication between the lock and an Aperio hub to connect to an access control system, eliminating the greatest cost and inconvenience of traditional access control – the wiring at the door. The IN100 utilizes HID® iCLASS® 13.56 MHz smart card technology and all technol-ogy features are supported by the physical security of SARGENT ANSI/BHMA Grade 1 hardware.This product is operated by six (6) “AA” alkaline batteries. SARGENT mortise locks are designed with quality components to provide high security, performance, and durability.The IN100 mortise lock may be used for both indoor and exterior applications. A weather-protectivegasket is required for exterior applications.Lock• IEEE 802.15.4 UHF interface• AES 128 bit encryptionCredential Support• HID 13.56 MHz iCLASS (full authentication, all formats• HID 125 kHz proxWhen a user presents a supported credential to the lock, the Aperio system is designed to send the credential wirelessly to the Aperio Hub. The Aperio Hub (wired through RS-485 or Wiegand) then communicates with an EAC (Electronic Access Control) system. The EAC system provides the access decision to the Aperio Hub where access to the lock is either granted or denied. Access Control PanelAperio Hub Electronic Access Control SystemTCP/IPRS-485/WiegandIEEE 802.15.4 (2.4GHz)IN100 Patent PendingPreliminary
4 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock Parts Breakdown13.56 MHz iCLASS & 125kHz Prox541*23561*786103131415151618171921 212019Tools Required:• #2 Phillips screwdriver• Flat head• T20 Torx Driver• Security allen wrench (provided)21* Patent pendingPreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 5Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 1 52-4481 Reader Assembly* 152-5359 Incepta Electronic Replacement Pack, iCLASS only, IA-C2, 797652-5360 Incepta Electronic Replacement Pack, iCLASS only, IA-C2 , 797752-5361 Incepta Electronic Replacement Pack, iCLASS only, IA-C2 , 797852-5362 Incepta Electronic Replacement Pack, iCLASS only, IA-C2 , 797952-5363 Incepta Electronic Replacement Pack, Prox only, PA-C2 , 797652-5364 Incepta Electronic Replacement Pack, Prox only, PA-C2 , 797752-5365 Incepta Electronic Replacement Pack, Prox only, PA-C2 , 797852-5366 Incepta Electronic Replacement Pack, Prox only, PA-C2 , 79792 52-1332 Gasket (Optional) 13 52-2847 Conduit Pack (Optional) 14 52-1370 Fire Shield* 15 52-1327 Mounting Plate 16 52-4488 Screw Pack 17 01-0898 AA battery 68 52-4483 Inside Cover Assembly 19 52-4321 Door Position Switch Pack 110 A8120 Field Prep Template (not shown) 111 4697 Door Manufacturers Template (not shown) 112 A8122 Instructions (not shown) 113 C2-7976-hand-finish Lock body with dead bolt with Cylinder 1C2-7977-hand-finish Lock body with dead bolt without CylinderC2-7978-hand-finish Lock body without dead bolt with CylinderC2-7979-hand-finish Lock body without dead bolt without Cylinder14 79-0035 Without dead bolt 179-0036 With dead bolt (shown) 115 77-4236 Mortise Screw Pack - Specify Finish (Includes: Wood and Metal Lock body Screws, Faceplate Screws, and Strike Screws)116 Consult Factory #41 Mortise Cylinder 117 13-2131 97 Ring 118 77-4081 130W Turn Lever 119 Consult Factory Reference Incepta Catalog 220 78-3696 O-rose 221 79-2162 Trim Pack 1 ITEM PART NO. DESCRIPTION QTY. Parts Breakdown 13.56 MHz iCLASS & 125kHz Prox (Continued) * Patent PendingPreliminary
6 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock A. Verify Hand and Bevel of DoorStand on outside of locked door when determining door hand.Lock InstallationLH Left Hand Hinges Left Open Inward LHRB Left Hand Reverse Bevel Hinges Left Open Outward RHRight Hand Hinges Right Open Inward RHRB Right Hand Reverse Bevel Hinges Right Open Outward Fig. 1A1 Prepare Door6B. Door PreparationPrior to installation, all holes must be free of burrs, debris and sharp edges. Prepare door according to appropriate template (see website www.intelligentopenings.com).• Field Template: A8120 (ships with product)• Door Manufacture’s Template: 4697Through-bolt HoleThumb Turn Lever Hole Outside Cylinder Hole(only with cylinder installation)Outside of DoorInside of DoorRibbon Cable Hole Lever Handle HoleThrough-bolt HoleRibbon Cable Hole Inside of Lock body Wire HoleLever Handle HoleThrough-bolt HoleMortisedPocketThumb Turn Lever HoleFig. 1BExternal DPS HolePreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 7Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 2 How to Change Hand of Lock body1. Position lock body so the red surface of the locking piece is visible.2. Insert blade type screwdriver into locking piece slot to rotate locking piece.3. Push locking piece toward the back of the lock body and rotate the locking piece 180°.Note: Red indicates locked (outside) side. Fig. 2AA. Reverse Lock Hand1. Rotate the latchbolt 180°.2. Flip deadlatch by hand to match bevel of latchbolt.B. Reverse Latch HandLocking pieceFig. 2BLocking pieceOutside of Door3 Install Door Position Switch (DPS)1. Insert DPS into the raceway on the latch edge of the door.2. Push wires through raceway toward lock prep. For hollow metal doors with a conduit installed, route DPS wire to the same preparation hole as the cylinder hole.3. Push DPS firmly into place by hand. Note: DO NOT TAP SWITCH WITH ANY TOOL.4. Install magnet into door frame. Push firmly into place by hand. See A7983A. 5. To connect DPS to lock controller per diagram, refer to the wiring in Step #14 section 3.Fig. 3Note: Alternate routing for hollow metal doors when using optional weather conduit, p/n 52-2847. Door Position Switch (DPS) Scan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
8 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock 4 Weather Conduit Installation (Optional P/N 52-2847)Fig. 4AInstall weather conduit on NON FIRE-RATED metal exterior doors only (Fig. 4A). 1. Carefully insert the weather conduit into the ribbon cable hole from the outside of the door.2. Place the O-ring around the weather conduit on the inside and up against the door (Fig. 4B). Fig. 4BO-RingInside of Door5 Install Lock body1. Feed the wire harness through the mortise pocket and inside preparation hole as depicted in Fig. 5.2. Carefully push the lock body into the pocket while lightly applying tension to the wire harness. Note: Do not pull the lock into the pocket with the harness alone. Ensure that the wire harness is not pinched between the lock and the mortise pocket. 3. Insert (2) #12-24 screws into the lock body and tighten with a screw driver.Mortise Connectors Fig. 5Inside of Door(2) #12-24 screwsScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 9Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 6 Attach Front PlateAttach front plate with (2) flat head screws. Outside of DoorFig. 6(2) flat head screwsScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobi7 Assemble Trim1. With outside lever horizontal, insert the mounting post through outside of door and lock body. Make certain the lever spindle is properly engaged inside the lock body (Fig 7A).2. On the inside of the door, insert spindle into square hole of mortise lock (Fig 7B).3. Slide inside adapter and plate assembly over spindle and secure with (2) 8-32 X 5/8” Phillips oval head and lock washer machine screws. Fig. 7BFig. 7A8-32 X 5/8” Phillips Oval Head and Lock WasherMachineScrewInside of DoorOutside of DoorOutside TrimScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiAssemble Trim Inside Lever AssemblyPreliminary
10 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock Fig. 8A Fig. 8BSet ScrewInside LeverSpindleRose1. Rotate the inside rose first counter clock wise to seat the threads then clockwise to securely tighten.2. Slide lever handle onto spindle until fully seated. Be sure handle is horizontal and facing the hinge side of the door. Push lever onto spindle so minimum gap is visible.3. Tighten the set screw securely with a T20 Torx.4. Before closing the door, test that the lever is functional and ensure smooth operation of the latchbolt.8 Install Inside Rose and Inside Lever AssemblyInside of DoorFig. 9B1. Slide the spring and the rosette onto the cylinder.2. Rotate the cylinder into cylinder hole with fingers.3. Insert key 75% of the way and utilize the key to rotate the cylinder into the rest of the cylinder hole. Note: Do not attempt to tighten all the way.4. Verify the orientation of the cylinder has the Sargent logo as depicted in Fig. 9A.5. Hand tighten the cylinder clamp screw with Phillips screwdriver to prevent unscrewing of the cylinder (Fig 9C).6. Test cylinder function: • Key retracts latchbolt and deadbolt (7976 function). Key retracts latchbolt (7978 function).• Cylinder not present for 7977 and 7979 functions.NOTE: Use lever handle holes to manipulate lock to ease thread engagement of cylinder.Fig. 9COutside of DoorIMPORTANT: Position cylinder so that the SARGENT logo is positioned correctly.Correct IncorrectFig. 9A9 Outside Cylinder InstallationCylinder Clamp-ScrewPhillips ScrewdriverRosetteSpringCylinderPreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 11Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 10 Install Thumb TurnFig. 10Thumb TurnInside of Door 1. Insert thumb turn into preparation hole and engage slot in lock body. 2. Orient mounting plate so screw hole is vertical (aligned with preparation holes). 3. Secure plate with phillips screw provided. 4. Test thumb turn for function by retracting and projecting the deadbolt (7976 and 7977 functions only).Phillips screwScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobi11 Inside Mounting Plate Installation1. Install washers onto both through bolts, Fig. 11A. Insert the through bolts through the upper and lower holes of the mounting plate. 2. Feed the DPS wire through the hole of the fire shield and feed the lock wiring into the slot, Fig. 11B. 3. Place the fire shield against the door and place the mounting plate over it so the through bolts align with the door holes.Mounting PlateFire shieldFig. 11CFig. 11AInside of Door2x Through bolts2x Through boltsFig. 11Bopen slot Scan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
12 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock 13 Outside Reader Installation1. Orient the reader so the HID logo is at the bottom and the lens is at the top.2. Feed the ribbon cable through the door (from out side to inside).3. Install the reader to the outside of door by aligning the mounting posts with the door preparation holes. Hold the reader in position with hand.4. While gently pressing upward on the outside reader, tighten the (2) through bolts on the inside of the door to secure the reader.HID ReaderOutside of Door Inside of DoorFig. 13A Fig. 13BGasket required for exterior doors (not required for fire rating). Figure 12.1. Place the gasket on the on the reader posts and ensure the shape is aligned with the edge of the reader.12 Gasket Installation (Optional P/N 52-1332)Fig. 12Scan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 13Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 14 Configuring RX Switch Handing1. Each lever handle has a sensor installed but only the inside lever is utilized for RX sensing.2. To properly configure the RX functionality, connect the terminals as indicated below: RH or RHRB door handing (blue to blue) LH or LHRB door handing (yellow to blue)3. Note: Factory default is blue to blue (right hand lock). IMPORTANT: grasp each connector firmly before separating. Do not pull wires apart.Wire harnessWire harnessDPSLock body wiring15 Battery Housing Wiring1. Connect the outside reader ribbon cable to the top of the battery housing (See Fig.15B for detail).2. Connect the DPS wire to the 3-wire header at the lower left corner of the PCB.3. Connect the lock body harness to the 5-wire header at the lower right corner of the PCB. IMPORTANT: Confirm the correct connector orientation prior to assembly. Do not force connectors Note: If the HID wire harness must be twisted to connect to the battery housing the HID reader has been installed upside down. Turn the HID reader right side up and reinstall, then connect.Lock body wiringDPSFig. 15AFig. 15BInside of DoorFig. 14Scan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
14 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock 16 Battery Housing Installation1. Position the DPS and harness below the tabs of the mounting plate.2. Align the tabs of the battery housing with the tabs of the mounting plate. Push down.3. Lightly press the lock harness to assemble.4. Snap battery compartment into position.Fig. 1617 Battery Installation1. Place (6) “AA” alkaline batteries in the compartment, being careful to align polarity properly.2. After batteries are installed an audible “beep” will sound, the lock motor will cycle. Refer to page 18, section “Lock Self Test LED Indication”, for proper power up LED indications. Fig. 17Inside of DoorInside of DoorScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiScan this Microsoft® Tag using your mobile phone to see a video of this installation step. The Microsoft Tag mobile app is required to scan the Tag. Download the free mobile app at http://gettag.mobiPreliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 15Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock 18 Inside Cover Installation1. Assemble cover by hooking top edge on inside mounting plate.2. Carefully press bottom of cover toward door without pinching any wires.3. Secure the cover utilizing a 1/8” security Allen wrench.Fig. 18Inside Cover1/8” Security Allen ScrewInside of DoorFor battery replacement: When replacing the (6) “AA” alkaline batteries in the compartment, please note batteries must be replaced within 5 minutes to prevent the internal clock from becoming inaccurate. Maintenance 7Preliminary
16 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock For 7976- and 7978-function mortise locks with cylinders:1. Insert key into cylinder and rotate.There should be no friction against lock case, wire harness or any other obstructions. 2. Check that the key retracts the latch: the key should rotate freely.3. Throw the deadbolt (if present): Check that the key retracts both the deadbolt and the latch.4. Try the inside lever: Ensure it retracts latch and deadbolt (if provided).5. Present a valid iCLASS or 125 kHz prox credential to unlock outside lever and retract latch. Note: The credential should approach the inscription on the reader as indicated to ensure the credential is read properly. Do not wave credential. Operational Check 8Preliminary
8/05/121-800-810-WIRE • www.sargentlock.com • A8122B 17Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.IN100 Mortise Lock Lock LED Indications9The lock has three LEDs that support an optical scheme with red, yellow and green. The indication scheme is described by the figures below:Card read (configurable) Access granted, EAC offline or online Access denied, EAC online Access denied, EAC offline One yellow flash (.25 seconds) One green flash (1 second) One red flash (1 second) Three red flashes (.5 second each) Continuous red flashes blocked when closing (.125 seconds every 1 second) Ten red flashes (.125 seconds each), maintenance required; repeated if lock can’t close Continuous yellow flashes (.25 seconds every 5 seconds) Continuous red flashes, (.25 seconds every 5 seconds) Fig. Lock Normal operation LED indication1 Lock Normal Operation LED indication2 Lock Maintenance LED Indication Some special LED indication schemes are used during lock maintenance actions:Enter configuration mode Five yellow flashes (.125 seconds each)Fig. Lock maintenance LED indication Lock mechanism is blocked when closing Error in lock, maintenance required Time to replace the battery Battery reached end of life, lock disabledNOTE: Ensure the tamper switch activator does not fall out of the cover during assembly. A tamper event message will be sent to the EAC panel if tamper is enabled. The “Error in lock” indication is also shown instead of the POST flashes if the battery is not accepted as new after a power-on-reset.Preliminary
18 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.8/050/12IN100 Mortise Lock 3 Lock Self Test LED IndicationAfter replacing the battery, a Power On Self Test (POST) is performed. The result is indicated using a series of red and green LED flashes as is described by the figure below:Fig. Lock POST LED indicationThe first flash is always red. If the POST fails, the color of the 16 trailing flashes indicate the status of each individual test as described by the following table: Blink Meaning if Red Code in Event Log2 Main board firmware corrupt 0x0001 3 Override list corrupt 0x00024 Production data corrupt 0x00045 Security data corrupt 0x00086 Configuration data corrupt 0x00107 Battery power low 0x00208 RFID reader circuit error 0x00409 Voltage regulator error 0x008010 Card detection circuit error 0x010011 Secure area communication error 0x020012 Secure area memory corrupt 0x040013 Secure area sensor or motor error 0x080014 Radio modem communication error 0x100015 Radio modem memory corrupt 0x200016 Radio modem configuration error 0x400017 Radio modem RF circuit error 0x8000NOTE: If the battery is not accepted as new after a power on reset, no POST is performed. Instead, the 10 quick red flashes used to indicate Error in lock is shown.One red, one green flash (1 second each) One red flash followed by 16 red or green flashes (.5 seconds each) 10 red flashes. Good POST Bad POSTThe “Error in lock” indication is also shown instead of the POST flashes if the battery is not accepted as new after a power-on-reset.Preliminary
NotesThe global leader in door opening solutionsPreliminary
SARGENT Manufacturing100 Sargent DriveNew Haven, CT 06511 USA800-810-WIRE (9473) • www.sargentlock.comFounded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices,electro-mechanical products and access control systems for new construction, renovation, and replacement applications.The company’s customer base includes commercial construction, institutional, and industrial markets.Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.ASSA ABLOY is the global leader in door opening solutions, dedicated tosatisfying end-user needs for security, safety and convenience. A8122B - 8/12Preliminary

Navigation menu