ASUSTeK Computer A002 ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone

Contents

User Manual

E12332User Guide15060-93710000
DRAFT / 03-10-17First Edition/ January 2017Model:ASUS_A002(ZS571KL)Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.NOTE: For the latest updates and more detailed information, please visit www.asus.com.Front featuresTouch screen displayReceiverLED indicatorTouch keysFront cameraProximity sensor and light sensorFingerprint sensor
DRAFT / 03-10-17Side featuresPower keyAudio jackVolume keySpeakerNano SIM1/Nano SIM2/ microSD combo card slotMicrophoneMicrophoneUSB Type C portNOTE: The USB Type-C port supports USB2.0 transfer rate.
DRAFT / 03-10-17Rear featuresRear cameraRear coverLaser focusRGB sensor / Camera ashMotion tracking cameraDepth sensing camera
DRAFT / 03-10-17Charging your ASUS PhoneTo charge your ASUS Phone:1. Connect the USB connector into the power adapter’s USB port.2. Connect the other end of the USB Type C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.IMPORTANT!• WhenusingyourASUSPhonewhileitisplugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.• WhenchargingyourASUSPhonethroughyour computer, ensure that you plug the USB Type C cable to your computer’s USB 2.0 / USB 3.0 port.• AvoidchargingyourASUSPhoneinanenvironment with ambient temperature of above 35 °C (95 °F). 231NOTES:• Forsafetypurposes,useONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.• Forsafetypurposes,useONLY the bundled power adapter and cable to charge your ASUS Phone.• Fastchargingisonlysupportedwhenusingthe bundled power adapter and cable.• Theinputvoltagerangebetweenthewalloutlet and this adapter is AC 100V - 240V. The output voltage of the USB Type C cable is +5V 2A,10W/+9V 2A,18W.
DRAFT / 03-10-171. Push a pin into the hole on the Nano SIM / MicroSD card tray to eject it. Insert the Nano SIM or MicroSD card(s) into the card slot(s).IMPORTANT: You can only use the Nano SIM2 card or the MicroSD card at a time.Installing a Nano SIM /MicroSD cardTo install a Nano SIM / MicroSD card:2. Push the tray to close it.IMPORTANT: WhentwoSIMcardsareinserted,only one SIM card slot supports 4G/3G/2G service. The other SIM card slot only supports 2G/3G service.NOTES:• BothNanoSIMcardslotssupportGSM/GPRS/EDGE,WCDMA/HSPA+/DC-HSPA+,FDD-LTE, and TD-LTE DSDS network bands.But only one Nano SIM can connect to FDD-LTE, and TD-LTE at a time. • ThemicroSDcardslotsupportsmicroSDandmicroSDXC card formats.
DRAFT / 03-10-17CAUTION!• Donotusesharptoolsorsolventonyourdevice to avoid scratches on it. • UseonlyastandardNanoSIMcardonyourASUS Phone.Using NFCYou can use NFC in the following two scenarios:Reader mode: Your phone reads information from a contactless card, NFC tag, or other NFC devices.Place the NFC area of your phone on the contactless card, NFC tag, or NFC device.Peer-to-Peer mode: Transfers photos, contacts, or other data between your phone and an NFC-enabled smartphone.Bring the NFC areas of both smartphones together, without any space between them.
DRAFT / 03-10-17Federal Communications Commission StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changesormodicationsnotexpresslyapprovedbythe party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However,thereisnoguaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipment and receiver.• Connecttheequipmentintoanoutletonacircuit different from that to which the receiver is connected.
DRAFT / 03-10-17• Consultthedealeroranexperiencedradio/TVtechnician for help.The country code selection is for non-US models only and is not available to all US models. Per FCC regulation,allWiFiproductsthataremarketedinUSmustbexedtoUS-operatedchannelsonly.Hearing Aid Compatibility Information (HAC)YourphoneiscompliantwiththeFCCHearingAidCompatibility requirements. TheFCChasadoptedHACrulesfordigitalwirelessphones. These rules require certain phone to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.Not all phones have been rated, a phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the M4/T4 level rating. However,hearingaidcompatibilityratingsdon’tguarantee that interference to your hearing aids won’t happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
DRAFT / 03-10-17This phone has been tested and rated for use with hearing aids for some of the wireless technologies thatituses.However,theremaybesomenewerwireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questionsaboutreturnorexchangepolicies,consultyour service provider or phone retailer.Hearingdevicesmayalsoberated.Yourhearingdevice manufacturer or hearing health professional mayhelpyoundthisrating.FormoreinformationaboutFCCHearingAidCompatibility,pleasegotohttp://www.fcc.gov/cgb/dro.Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada’s licence-exemptRSSstandard(s).Operationissubject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.LeprésentappareilestconformeauxCNRd’IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L’exploitationestautoriséeauxdeuxconditionssuivantes:(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
DRAFT / 03-10-17Radio Frequency (RF) Exposure InformationTheradiatedoutputpoweroftheWirelessDeviceis below the Industry Canada (IC) radio frequency exposurelimits.TheWirelessDeviceshouldbeused in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and showncompliantwiththeICSpecicAbsorptionRate(“SAR”)limitswheninstalledinspecichostproductsoperatedinportableexposureconditions.Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=engAdditionalCanadianinformationonRFexposurealso can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.htmlInformations concernant l’exposition aux fréquences radio (RF)La puissance de sortie émise par cet appareil sanslestinférieureàlalimited’expositionauxfréquences radio d’Industrie Canada (IC). Utilisez l’appareilsansldefaçonàminimiserlescontactshumains lors du fonctionnement normal.Ce périphérique a été évalué et démontré conforme auxlimitesSAR(SpecicAbsorptionRate–Tauxd’absorptionspécique)d’IClorsqu’ilestinstallédans des produits hôtes particuliers qui fonctionnent dansdesconditionsd’expositionàdesappareilsportables.Ce périphérique est homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant àl’appareildanslalisted’équipementradio(REL- Radio Equipment List) d’Industrie Canada rendez-vous sur:http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
DRAFT / 03-10-17Pour des informations supplémentaires concernant l’expositionauxRFauCanadarendez-voussur:http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.htmlCAN ICES-3(B)/NMB-3(B)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme àlanormeNMB-003duCanada.This device and its antenna(s) must not be co-located or operated in conjunction with any other antennaortransmitter,excepttestedbuilt-inradios.The County Code Selection feature is disabled for products that are marketed in the US/ Canada.Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenneouunautreémetteur,exceptionfaitesdesradios intégrées qui ont été testées. La fonction de sélection de l’indicatif du pays est désactivéepourlesproduitscommercialisésauxÉtats-Unis et au Canada.The IC ID for this device is 3568A-A002.L’identiantIndustrieCanadadecetappareilest:3568A-A002.RF Exposure Information (SAR)This device has been tested and meets applicable limitsforRadioFrequency(RF)exposure.SpecicAbsorptionRate(SAR)referstotherateatwhich the body absorbs RF energy. SAR limits are 1.6Wattsperkilogram(overavolumecontaininga mass of 1 gram of tissue) in countries that follow theUnitedStatesFCClimitand2.0W/kg(averagedover 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions withthedevicetransmittingatitshighestcertiedpower level in all tested frequency bands.
DRAFT / 03-10-17ToreduceexposuretoRFenergy,useahands-free accessory or other similar option to keep this device from your head and body. Carry this device at least 15 mm away from your body to ensure exposurelevelsremainatorbelowtheas-testedlevels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance withRFexposureguidelines,inamannerthathasnotbeentestedorcertied,andusesuchaccessories should be avoided.The highest FCC SAR value for the device are as follows:• 1.16W/kg@1g(Head)• 0.61W/kg@1g(Body)The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated asincompliancewiththeFCCRFexposureguidelines.SARinformationonthisdeviceisonlewith the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQA002.NOTES: For more Regulatory information and compliance marks (E-labels) about FCC/IC/MIC/VCCI, please refer to your device via the following steps: Settings > About > Regulatory Information.
DRAFT / 03-10-17CE RF Exposure ComplianceThis device meets the EU requirements (1999/519/EC)onthelimitationofexposureofthegeneralpublictoelectromagneticeldsbywayofhealthprotection.For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 0.5 cm to the body, whiletransmittingatthehighestcertiedoutputpower level in all frequency bands of this device. Use of other accessories which contain metals maynotensurecompliancewithICNIRPexposureguidelines.CE Mark WarningCE marking for devices with wireless LAN/ BluetoothThis equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.The highest CE SAR values for the device are as follows:• 0.85W/kg@10g(Head)• 1.59W/kg@10g(Body)This device is restricted for indoor use only whenoperatingunder5150MHzto5350MHzoffrequency range.For 5GHz WLAN: This equipment may be operated in:AT BE BG CH CY CZ DE DKEE ES FI FR GB GR HU IEIT IS LI LT LU LV MT NLNO PL PT RO SE SI SK TR
DRAFT / 03-10-17Using GPS (Global Positioning System) on your ASUS PhoneTo use the GPS positioning feature on your ASUS Phone:• Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps.• Forrst-timeuseofaGPS-enabledapponyour device, ensure that you are outdoors to get the best positioning data.• WhenusingaGPS-enabledapponyour device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.CLASS 1 LASER PRODUCTLaser safety informationFor 5GHz WLAN: This equipment may be operated in:AT BE BG CH CY CZ DE DKEE ES FI FR GB GR HU IEIT IS LI LT LU LV MT NLNO PL PT RO SE SI SK TR
DRAFT / 03-10-17Safety informationASUS Phone care• UseyourASUSPhoneinanenvironmentwithambient temperatures between 0 °C (32 °F) and 35 °C (95 °F).The batteryYour ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.• Donotremovethenon-detachableLi-polymerbattery as this will void the warranty.• Avoidcharginginextremelyhighorlowtemperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.• Donotremoveandreplacethebatterywithanon-approved battery.• Donotremoveandsoakthebatteryinwaterorany other liquid.• Nevertrytoopenthebatteryasitcontainssubstances that might be harmful if swallowed or allowed to come into contact with unprotected skin.• Donotremoveandshort-circuitthebattery,asitmayoverheatandcauseare.Keepitawayfrom jewelry or metal objects.• Donotremoveanddisposeofthebatteryinre.Itcouldexplodeandreleaseharmfulsubstances into the environment.• Donotremoveanddisposeofthebatterywithyour regular household waste. Take it to a hazardous material collection point.• Donottouchthebatteryterminals.CAUTION! Use of controls or adjustments or performance of procedures other than those speciedhereinmayresultinhazardousradiationexposure.
DRAFT / 03-10-17NOTES:• Riskofexplosionifbatteryisreplacedbyanincorrect type.• Disposeofusedbatteryaccordingtotheinstructions.The charger• UseonlythechargersuppliedwithyourASUSPhone.• Neverpullthechargercordtodisconnectitfrom the power socket. Pull the charger itself.CautionYour ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.• DonotusetheASUSPhoneinanextremeenvironment where high temperature or high humidityexists.TheASUSPhoneperformsoptimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F).• DonotdisassembletheASUSPhoneoritsaccessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shockorremayresult.• Donotshort-circuitthebatteryterminalswithmetal items.Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.
DRAFT / 03-10-17ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protectingourenvironment.Webelieveinprovidingsolutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.Regional notice for SingaporeThis ASUS Phone complies with IMDA Standards.India E-waste (Management) Rule 2016This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.
DRAFT / 03-10-17Proper disposalRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.DONOTthrowthisproductinre.DO NOT short circuit the contacts. DO NOT disassemble this product.WARNING! This product may contain chemicals known to the State of California to cause cancer, birthdefects,orotherreproductiveharm.Washhands after handling.General Usage (typical body-worn) This device (front & rear side) should be operated under a seperation distance of 5 mm from the human body. * The other four sides are not in close proximitytothehumanbodyatthegeneraluse as described above.
DRAFT / 03-10-17Copyright © 2017 ASUSTeK COMPUTER INC.All Rights Reserved.You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website,andshallremaintheexclusivepropertyofASUSand/oritslicensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTYOF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINEDINTHISMANUALAREFURNISHEDFORINFORMATIONALUSEONLY,ANDARESUBJECTTOCHANGEATANYTIMEWITHOUTNOTICE,ANDSHOULDNOTBECONSTRUED AS A COMMITMENT BY ASUS.ASUSAddress: 4F, 150 LI-TE RD., PEITOU, TAIPEI, TAIWANTel: 886228943447Fax: 886228907698DeclarationWedeclarethattheIMEIcodesforthisproduct,ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressedintheGSMstandards.Should you have any questions or comments regarding this matter, please contact us.Sincerely yours,ASUSTeK COMPUTER INC.Tel: 886228943447Fax:886228907698Support:http://vip.asus.com/eservice/techserv.aspxZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)

Navigation menu