ASUSTeK Computer A002 ASUS Phone User Manual
ASUSTeK Computer Inc ASUS Phone
Contents
- 1. User Manual
- 2. User Manual(Safety)
User Manual
E12332
User Guide
15060-93710000
DRAFT / 03-10-17
First Edition/ January 2017
Model:ASUS_A002(ZS571KL)
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Touch screen
display
Receiver
LED indicator
Touch keys
Front camera
Proximity
sensor and
light sensor
Fingerprint sensor
DRAFT / 03-10-17
Side features
Power key
Audio jack
Volume key
Speaker
Nano SIM1/
Nano SIM2/
microSD
combo card
slot
Microphone
Microphone
USB Type C port
NOTE: The USB Type-C port supports USB2.0
transfer rate.
DRAFT / 03-10-17
Rear features
Rear camera
Rear cover
Laser focus
RGB sensor /
Camera ash
Motion tracking
camera
Depth sensing
camera
DRAFT / 03-10-17
Charging your ASUS Phone
To charge your ASUS Phone:
1. Connect the USB connector into the power
adapter’s USB port.
2. Connect the other end of the USB Type C
cable to your ASUS Phone.
3. Plug the power adapter into a wall socket.
IMPORTANT!
• WhenusingyourASUSPhonewhileitis
plugged to a power outlet, the grounded
power outlet must be near to the unit and
easily accessible.
• WhenchargingyourASUSPhonethrough
your computer, ensure that you plug the USB
Type C cable to your computer’s USB 2.0 /
USB 3.0 port.
• AvoidchargingyourASUSPhoneinan
environment with ambient temperature of
above 35 °C (95 °F).
2
3
1
NOTES:
• Forsafetypurposes,useONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
• Forsafetypurposes,useONLY the bundled
power adapter and cable to charge your
ASUS Phone.
• Fastchargingisonlysupportedwhenusing
the bundled power adapter and cable.
• Theinputvoltagerangebetweenthewall
outlet and this adapter is AC 100V - 240V.
The output voltage of the USB Type C cable
is +5V 2A,10W/+9V 2A,18W.
DRAFT / 03-10-17
1. Push a pin into the hole on the Nano SIM /
MicroSD card tray to eject it. Insert the Nano
SIM or MicroSD card(s) into the card slot(s).
IMPORTANT: You can only use the Nano SIM2
card or the MicroSD card at a time.
Installing a Nano SIM /MicroSD card
To install a Nano SIM / MicroSD card:
2. Push the tray to
close it.
IMPORTANT: WhentwoSIMcardsareinserted,
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G/3G
service.
NOTES:
• BothNanoSIMcardslotssupportGSM/
GPRS/EDGE,WCDMA/HSPA+/DC-HSPA+,
FDD-LTE, and TD-LTE DSDS network bands.
But only one Nano SIM can connect to FDD-
LTE, and TD-LTE at a time.
• ThemicroSDcardslotsupportsmicroSDand
microSDXC card formats.
DRAFT / 03-10-17
CAUTION!
• Donotusesharptoolsorsolventonyour
device to avoid scratches on it.
• UseonlyastandardNanoSIMcardonyour
ASUS Phone.
Using NFC
You can use NFC in the following two scenarios:
Reader mode: Your phone reads information from a
contactless card, NFC tag, or other NFC devices.
Place the NFC area of your phone on the
contactless card, NFC tag, or NFC device.
Peer-to-Peer mode: Transfers photos, contacts,
or other data between your phone and an NFC-
enabled smartphone.
Bring the NFC areas of both smartphones together,
without any space between them.
DRAFT / 03-10-17
Federal Communications
Commission Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changesormodicationsnotexpresslyapprovedby
the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.However,thereisnoguarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweenthe
equipment and receiver.
• Connecttheequipmentintoanoutletona
circuit different from that to which the receiver
is connected.
DRAFT / 03-10-17
• Consultthedealeroranexperiencedradio/TV
technician for help.
The country code selection is for non-US models
only and is not available to all US models. Per FCC
regulation,allWiFiproductsthataremarketedinUS
mustbexedtoUS-operatedchannelsonly.
Hearing Aid Compatibility Information
(HAC)
YourphoneiscompliantwiththeFCCHearingAid
Compatibility requirements.
TheFCChasadoptedHACrulesfordigitalwireless
phones. These rules require certain phone to be
tested and rated under the American National
Standard Institute (ANSI) C63.19-2011 hearing
aid compatibility standards. The ANSI standard
for hearing aid compatibility contains two types of
ratings:
M-Ratings: Rating for less radio frequency
interference to enable acoustic coupling with
hearing aids.
T-Ratings: Rating for inductive coupling with hearing
aids in telecoil mode.
Not all phones have been rated, a phone is
considered hearing aid compatible under FCC
rules if it is rated M3 or M4 for acoustic coupling
and T3 or T4 for inductive coupling. These ratings
are given on a scale from one to four, where four
is the most compatible. Your phone meets the M4/
T4 level rating.
However,hearingaidcompatibilityratingsdon’t
guarantee that interference to your hearing aids
won’t happen. Results will vary, depending on the
level of immunity of your hearing device and the
degree of your hearing loss. If your hearing device
happens to be vulnerable to interference, you may
not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the
best way to evaluate it for your personal needs.
DRAFT / 03-10-17
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies
thatituses.However,theremaybesomenewer
wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is
important to try the different features of this phone
thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if you
hear any interfering noise. Consult your service
provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have
questionsaboutreturnorexchangepolicies,consult
your service provider or phone retailer.
Hearingdevicesmayalsoberated.Yourhearing
device manufacturer or hearing health professional
mayhelpyoundthisrating.Formoreinformation
aboutFCCHearingAidCompatibility,pleasegoto
http://www.fcc.gov/cgb/dro.
Canada, Industry Canada (IC)
Notices
This device complies with Industry Canada’s
licence-exemptRSSstandard(s).Operationis
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
LeprésentappareilestconformeauxCNR
d’IndustrieCanadaapplicablesauxappareilsradio
exemptsdelicence.L’exploitationestautoriséeaux
deuxconditionssuivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
DRAFT / 03-10-17
Radio Frequency (RF) Exposure Information
TheradiatedoutputpoweroftheWirelessDevice
is below the Industry Canada (IC) radio frequency
exposurelimits.TheWirelessDeviceshouldbe
used in such a manner such that the potential
for human contact during normal operation is
minimized. This device has been evaluated for and
showncompliantwiththeICSpecicAbsorption
Rate(“SAR”)limitswheninstalledinspecichost
productsoperatedinportableexposureconditions.
Canada’s REL (Radio Equipment List) can be found
at the following web address: http://www.ic.gc.ca/
app/sitt/reltel/srch/nwRdSrch.do?lang=eng
AdditionalCanadianinformationonRFexposure
also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
Informations concernant l’exposition aux
fréquences radio (RF)
La puissance de sortie émise par cet appareil
sanslestinférieureàlalimited’expositionaux
fréquences radio d’Industrie Canada (IC). Utilisez
l’appareilsansldefaçonàminimiserlescontacts
humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme
auxlimitesSAR(SpecicAbsorptionRate–Taux
d’absorptionspécique)d’IClorsqu’ilestinstallé
dans des produits hôtes particuliers qui fonctionnent
dansdesconditionsd’expositionàdesappareils
portables.
Ce périphérique est homologué pour l’utilisation
au Canada. Pour consulter l’entrée correspondant
àl’appareildanslalisted’équipementradio(REL
- Radio Equipment List) d’Industrie Canada rendez-
vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.
do?lang=eng
DRAFT / 03-10-17
Pour des informations supplémentaires concernant
l’expositionauxRFauCanadarendez-voussur:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
àlanormeNMB-003duCanada.
This device and its antenna(s) must not be co-
located or operated in conjunction with any other
antennaortransmitter,excepttestedbuilt-inradios.
The County Code Selection feature is disabled for
products that are marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être
situés ou fonctionner en conjonction avec une autre
antenneouunautreémetteur,exceptionfaitesdes
radios intégrées qui ont été testées.
La fonction de sélection de l’indicatif du pays est
désactivéepourlesproduitscommercialisésaux
États-Unis et au Canada.
The IC ID for this device is 3568A-A002.
L’identiantIndustrieCanadadecetappareilest:
3568A-A002.
RF Exposure Information (SAR)
This device has been tested and meets applicable
limitsforRadioFrequency(RF)exposure.
SpecicAbsorptionRate(SAR)referstotherateat
which the body absorbs RF energy. SAR limits are
1.6Wattsperkilogram(overavolumecontaining
a mass of 1 gram of tissue) in countries that follow
theUnitedStatesFCClimitand2.0W/kg(averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR
are conducted using standard operating positions
withthedevicetransmittingatitshighestcertied
power level in all tested frequency bands.
DRAFT / 03-10-17
ToreduceexposuretoRFenergy,useahands-
free accessory or other similar option to keep this
device from your head and body. Carry this device
at least 15 mm away from your body to ensure
exposurelevelsremainatorbelowtheas-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
withRFexposureguidelines,inamannerthat
hasnotbeentestedorcertied,andusesuch
accessories should be avoided.
The highest FCC SAR value for the device are as
follows:
• 1.16W/kg@1g(Head)
• 0.61W/kg@1g(Body)
The FCC has granted an Equipment Authorization
for this device with all reported SAR levels evaluated
asincompliancewiththeFCCRFexposure
guidelines.SARinformationonthisdeviceisonle
with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: MSQA002.
NOTES: For more Regulatory information and
compliance marks (E-labels) about FCC/IC/
MIC/VCCI, please refer to your device via the
following steps: Settings
>
About
>
Regulatory
Information.
DRAFT / 03-10-17
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/
EC)onthelimitationofexposureofthegeneral
publictoelectromagneticeldsbywayofhealth
protection.
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
European Standard EN 62209-2, for use with
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
whiletransmittingatthehighestcertiedoutput
power level in all frequency bands of this device.
Use of other accessories which contain metals
maynotensurecompliancewithICNIRPexposure
guidelines.
CE Mark Warning
CE marking for devices with wireless
LAN/ Bluetooth
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing
Radio and Telecommunications Equipment and
mutual recognition of conformity.The highest CE
SAR values for the device are as follows:
• 0.85W/kg@10g(Head)
• 1.59W/kg@10g(Body)
This device is restricted for indoor use only
whenoperatingunder5150MHzto5350MHzof
frequency range.
For 5GHz WLAN: This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
DRAFT / 03-10-17
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
• Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
• Forrst-timeuseofaGPS-enabledappon
your device, ensure that you are outdoors to
get the best positioning data.
• WhenusingaGPS-enabledappon
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
CLASS 1 LASER PRODUCT
Laser safety information
For 5GHz WLAN: This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
DRAFT / 03-10-17
Safety information
ASUS Phone care
• UseyourASUSPhoneinanenvironmentwith
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
• Donotremovethenon-detachableLi-polymer
battery as this will void the warranty.
• Avoidcharginginextremelyhighorlow
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
• Donotremoveandreplacethebatterywitha
non-approved battery.
• Donotremoveandsoakthebatteryinwateror
any other liquid.
• Nevertrytoopenthebatteryasitcontains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
• Donotremoveandshort-circuitthebattery,as
itmayoverheatandcauseare.Keepitaway
from jewelry or metal objects.
• Donotremoveanddisposeofthebattery
inre.Itcouldexplodeandreleaseharmful
substances into the environment.
• Donotremoveanddisposeofthebatterywith
your regular household waste. Take it to a
hazardous material collection point.
• Donottouchthebatteryterminals.
CAUTION! Use of controls or adjustments or
performance of procedures other than those
speciedhereinmayresultinhazardousradiation
exposure.
DRAFT / 03-10-17
NOTES:
• Riskofexplosionifbatteryisreplacedbyan
incorrect type.
• Disposeofusedbatteryaccordingtothe
instructions.
The charger
• UseonlythechargersuppliedwithyourASUS
Phone.
• Neverpullthechargercordtodisconnectit
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
• DonotusetheASUSPhoneinanextreme
environment where high temperature or high
humidityexists.TheASUSPhoneperforms
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
• DonotdisassembletheASUSPhoneorits
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shockorremayresult.
• Donotshort-circuitthebatteryterminalswith
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
DRAFT / 03-10-17
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protectingourenvironment.Webelieveinproviding
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Regional notice for Singapore
This ASUS Phone complies with IMDA Standards.
India E-waste (Management) Rule
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits use of lead,
mercury, hexavalent chromium, polybrominated
biphenyls (PBBs) and polybrominated diphenyl ethers
(PBDEs) in concentrations exceeding 0.1% by weight
in homogenous materials and 0.01 % by weight in
homogenous materials for cadmium, except for the
exemptions listed in Schedule II of the Rule.
DRAFT / 03-10-17
Proper disposal
Risk of explosion if battery is
replaced by an incorrect type.
Dispose of used batteries
according to the instructions.
DO NOT throw the battery in
municipal waste. The symbol of the
crossed out wheeled bin indicates
that the battery should not be placed
in municipal waste.
DO NOT throw this product in
municipal waste. This product has
been designed to enable proper
reuse of parts and recycling. The
symbol of the crossed out wheeled
bin indicates that the product
(electrical, electronic equipment
and mercury-containing button
cell battery) should not be placed
in municipal waste. Check local
regulations for disposal of electronic
products.
DONOTthrowthisproductinre.
DO NOT short circuit the contacts.
DO NOT disassemble this product.
WARNING! This product may contain chemicals
known to the State of California to cause cancer,
birthdefects,orotherreproductiveharm.Wash
hands after handling.
General Usage (typical body-worn)
This device (front & rear side) should be
operated under a seperation distance of 5 mm
from the human body.
* The other four sides are not in close
proximitytothehumanbodyatthegeneral
use as described above.
DRAFT / 03-10-17
Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website,andshallremaintheexclusivepropertyofASUSand/orits
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINEDINTHISMANUALAREFURNISHEDFOR
INFORMATIONALUSEONLY,ANDARESUBJECTTOCHANGE
ATANYTIMEWITHOUTNOTICE,ANDSHOULDNOTBE
CONSTRUED AS A COMMITMENT BY ASUS.
ASUS
Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI,
TAIWAN
Tel: 886228943447
Fax: 886228907698
Declaration
WedeclarethattheIMEIcodesforthisproduct,ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressedintheGSMstandards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax:886228907698
Support:http://vip.asus.com/eservice/techserv.aspx
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)