ASUSTeK Computer A002 ASUS Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3314263
Application ID	7PiJNf5xlLdA5utkFiEeYw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.12kB (1076469 bits)
Date Submitted	2017-03-13 00:00:00
Date Available	2017-09-10 00:00:00
Creation Date	2017-03-10 09:13:33
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-03-10 13:46:08
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

User Guide
E12332
15060-93710000
DRAFT / 03-10-17
First Edition/ January 2017
Model:ASUS_A002(ZS571KL)
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Receiver
LED indicator
Front camera
Proximity
sensor and
light sensor
Touch screen
display
Touch keys
Fingerprint sensor
Side features
Microphone
Nano SIM1/
Nano SIM2/
microSD
combo card
slot
Volume key
Power key
Audio jack
Speaker
USB Type C port
NOTE: The USB Type-C port supports USB2.0
transfer rate.
DRAFT / 03-10-17
Microphone
DRAFT / 03-10-17
Rear features
RGB sensor /
Camera flash
Rear camera
Depth sensing
camera
Motion tracking
camera
Laser focus
Rear cover
Charging your ASUS Phone
To charge your ASUS Phone:
1.
Connect the USB connector into the power
adapter’s USB port.
2.
Connect the other end of the USB Type C
cable to your ASUS Phone.
3.
Plug the power adapter into a wall socket.
•
When using your ASUS Phone while it is
plugged to a power outlet, the grounded
power outlet must be near to the unit and
easily accessible.
•
When charging your ASUS Phone through
your computer, ensure that you plug the USB
Type C cable to your computer’s USB 2.0 /
USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of
above 35 °C (95 °F).
•
NOTES:
•
For safety purposes, use ONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
•
For safety purposes, use ONLY the bundled
power adapter and cable to charge your
ASUS Phone.
•
•
Fast charging is only supported when using
the bundled power adapter and cable.
The input voltage range between the wall
outlet and this adapter is AC 100V - 240V.
The output voltage of the USB Type C cable
is +5V 2A, 10W / +9V 2A, 18W.
DRAFT / 03-10-17
IMPORTANT!
DRAFT / 03-10-17
Installing a Nano SIM /MicroSD card
To install a Nano SIM / MicroSD card:
1.
Push a pin into the hole on the Nano SIM /
MicroSD card tray to eject it. Insert the Nano
SIM or MicroSD card(s) into the card slot(s).
2.
Push the tray to
close it.
IMPORTANT: You can only use the Nano SIM2
card or the MicroSD card at a time.
NOTES:
•
•
Both Nano SIM card slots support GSM/
GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+,
FDD-LTE, and TD-LTE DSDS network bands.
But only one Nano SIM can connect to FDDLTE, and TD-LTE at a time.
The microSD card slot supports microSD and
microSDXC card formats.
IMPORTANT: When two SIM cards are inserted,  
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G/3G
service.
CAUTION!
•
•
Do not use sharp tools or solvent on your
device to avoid scratches on it.
Use only a standard Nano SIM card on your
ASUS Phone.
Using NFC
You can use NFC in the following two scenarios:
Reader mode: Your phone reads information from a
contactless card, NFC tag, or other NFC devices.
Peer-to-Peer mode: Transfers photos, contacts,
or other data between your phone and an NFCenabled smartphone.
Bring the NFC areas of both smartphones together,
without any space between them.
DRAFT / 03-10-17
Place the NFC area of your phone on the
contactless card, NFC tag, or NFC device.
DRAFT / 03-10-17
Federal Communications
Commission Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
The country code selection is for non-US models
only and is not available to all US models. Per FCC
regulation, all WiFi products that are marketed in US
must be fixed to US-operated channels only.
Hearing Aid Compatibility Information
(HAC)
Your phone is compliant with the FCC Hearing Aid
Compatibility requirements.
M-Ratings: Rating for less radio frequency
interference to enable acoustic coupling with
hearing aids.
T-Ratings: Rating for inductive coupling with hearing
aids in telecoil mode.
Not all phones have been rated, a phone is
considered hearing aid compatible under FCC
rules if it is rated M3 or M4 for acoustic coupling
and T3 or T4 for inductive coupling. These ratings
are given on a scale from one to four, where four
is the most compatible. Your phone meets the M4/
T4 level rating.
However, hearing aid compatibility ratings don’t
guarantee that interference to your hearing aids
won’t happen. Results will vary, depending on the
level of immunity of your hearing device and the
degree of your hearing loss. If your hearing device
happens to be vulnerable to interference, you may
not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the
best way to evaluate it for your personal needs.
DRAFT / 03-10-17
The FCC has adopted HAC rules for digital wireless
phones. These rules require certain phone to be
tested and rated under the American National
Standard Institute (ANSI) C63.19-2011 hearing
aid compatibility standards. The ANSI standard
for hearing aid compatibility contains two types of
ratings:
DRAFT / 03-10-17
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies
that it uses. However, there may be some newer
wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is
important to try the different features of this phone
thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if you
hear any interfering noise. Consult your service
provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have
questions about return or exchange policies, consult
your service provider or phone retailer.
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. For more information
about FCC Hearing Aid Compatibility, please go to
http://www.fcc.gov/cgb/dro.
Canada, Industry Canada (IC)
Notices
This device complies with Industry Canada’s
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device
is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be
used in such a manner such that the potential
for human contact during normal operation is
minimized. This device has been evaluated for and
shown compliant with the IC Specific Absorption
Rate (“SAR”) limits when installed in specific host
products operated in portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found
at the following web address: http://www.ic.gc.ca/
app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Informations concernant l’exposition aux
fréquences radio (RF)
La puissance de sortie émise par cet appareil
sans fil est inférieure à la limite d’exposition aux
fréquences radio d’Industrie Canada (IC). Utilisez
l’appareil sans fil de façon à minimiser les contacts
humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme
aux limites SAR (Specific Absorption Rate – Taux
d’absorption spécifique) d’IC lorsqu’il est installé
dans des produits hôtes particuliers qui fonctionnent
dans des conditions d’exposition à des appareils
portables.
Ce périphérique est homologué pour l’utilisation
au Canada. Pour consulter l’entrée correspondant
à l’appareil dans la liste d’équipement radio (REL
- Radio Equipment List) d’Industrie Canada rendezvous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.
do?lang=eng
DRAFT / 03-10-17
Additional Canadian information on RF exposure
also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
DRAFT / 03-10-17
Pour des informations supplémentaires concernant
l’exposition aux RF au Canada rendez-vous sur:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This device and its antenna(s) must not be colocated or operated in conjunction with any other
antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for
products that are marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être
situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées.
La fonction de sélection de l’indicatif du pays est
désactivée pour les produits commercialisés aux
États-Unis et au Canada.
The IC ID for this device is 3568A-A002.
L’identifiant Industrie Canada de cet appareil est:
3568A-A002.
RF Exposure Information (SAR)
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at
which the body absorbs RF energy. SAR limits are
1.6 Watts per kilogram (over a volume containing
a mass of 1 gram of tissue) in countries that follow
the United States FCC limit and 2.0 W/kg (averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR
are conducted using standard operating positions
with the device transmitting at its highest certified
power level in all tested frequency bands.
To reduce exposure to RF energy, use a handsfree accessory or other similar option to keep this
device from your head and body. Carry this device
at least 15 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that
has not been tested or certified, and use such
accessories should be avoided.
•
1.16 W/kg @1g (Head)
0.61 W/kg @1g (Body)
The FCC has granted an Equipment Authorization
for this device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file
with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: MSQA002.
•
NOTES: For more Regulatory information and
compliance marks (E-labels) about FCC/IC/
MIC/VCCI, please refer to your device via the
following steps: Settings > About > Regulatory
Information.
DRAFT / 03-10-17
The highest FCC SAR value for the device are as
follows:
DRAFT / 03-10-17
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/
EC) on the limitation of exposure of the general
public to electromagnetic fields by way of health
protection.
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
European Standard EN 62209-2, for use with
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
while transmitting at the highest certified output
power level in all frequency bands of this device.
Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure
guidelines.
CE Mark Warning
CE marking for devices with wireless
LAN/ Bluetooth
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing
Radio and Telecommunications Equipment and
mutual recognition of conformity.The highest CE
SAR values for the device are as follows:
•
0.85 W/kg@10g (Head)
•
1.59 W/kg@10g (Body)
This device is restricted for indoor use only
when operating under 5150 MHz to 5350 MHz of
frequency range.
For 5GHz WLAN: This equipment may be operated in:
AT
BE
BG
CH
CY
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HU
IE
IT
IS
LI
LT
LU
LV
MT
NL
NO
PL
PT
RO
SE
SI
SK
TR
Laser safety information
CLASS 1 LASER PRODUCT
To use the GPS positioning feature on your ASUS
Phone:
•
Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
•
For first-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
•
When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
DRAFT / 03-10-17
Using GPS (Global Positioning
System) on your ASUS Phone
DRAFT / 03-10-17
Safety information
CAUTION! Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
•
Do not remove the non-detachable Li-polymer
battery as this will void the warranty.
•
Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
•
Do not remove and replace the battery with a
non-approved battery.
•
Do not remove and soak the battery in water or
any other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
•
Do not remove and short-circuit the battery, as
it may overheat and cause a fire. Keep it away
from jewelry or metal objects.
•
Do not remove and dispose of the battery
in fire. It could explode and release harmful
substances into the environment.
•
Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
•
Do not touch the battery terminals.
NOTES:
•
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The charger
•
Use only the charger supplied with your ASUS
Phone.
•
Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or fire may result.
•
Do not short-circuit the battery terminals with
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
DRAFT / 03-10-17
Caution
DRAFT / 03-10-17
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Regional notice for Singapore
This ASUS Phone complies with IMDA Standards.
India E-waste (Management) Rule
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits use of lead,
mercury, hexavalent chromium, polybrominated
biphenyls (PBBs) and polybrominated diphenyl ethers
(PBDEs) in concentrations exceeding 0.1% by weight
in homogenous materials and 0.01 % by weight in
homogenous materials for cadmium, except for the
exemptions listed in Schedule II of the Rule.
Proper disposal
Risk of explosion if battery is
replaced by an incorrect type.
Dispose of used batteries
according to the instructions.
DO NOT throw the battery in
municipal waste. The symbol of the
crossed out wheeled bin indicates
that the battery should not be placed
in municipal waste.
DO NOT throw this product in fire.
DO NOT short circuit the contacts.
DO NOT disassemble this product.
WARNING! This product may contain chemicals
known to the State of California to cause cancer,
birth defects, or other reproductive harm. Wash
hands after handling.
General Usage (typical body-worn)
This device (front & rear side) should be
operated under a seperation distance of 5 mm
from the human body.
* The other four sides are not in close
proximity to the human body at the general
use as described above.
DRAFT / 03-10-17
DO NOT throw this product in
municipal waste. This product has
been designed to enable proper
reuse of parts and recycling. The
symbol of the crossed out wheeled
bin indicates that the product
(electrical, electronic equipment
and mercury-containing button
cell battery) should not be placed
in municipal waste. Check local
regulations for disposal of electronic
products.
DRAFT / 03-10-17
ASUS
Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI,
TAIWAN
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website,  and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:03:10 09:13:33+08:00
Metadata Date                   : 2017:03:10 13:46:08+08:00
Modify Date                     : 2017:03:10 13:46:08+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:ece4e7d3-445f-4811-a664-bdefafb4dafb
Original Document ID            : adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Document ID                     : xmp.id:06DD70C72E05E7118144E3A19006718C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:EDDF5CC02E05E7118144E3A19006718C
Derived From Document ID        : xmp.did:A2583B432CE2E611BD5CD74734FE8512
Derived From Original Document ID: adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:03:10 09:13:33+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools